Not able to see the Business systems

Dear Experts,
Thanks for you support and help.
I have created as per the below sequence for both sender and receiver types wherever necessary
1. Software Product
2. Software Component -
3.Technical System - (Third party )
4. Business system (Sender and Receiver)
http://wiki.sdn.sap.com/wiki/display/XI/CopyofFLATFILETOFLATFILE
imported the software compnent in IR and created Data Types, Message types etc and tested, it is working good.
I have created a Configuration Scenario, and tried to assign the business system in "Service Without Party", i was not able to see both the sender and receiver Business Systems which were already created and getting an error : service :Business systems not found
Do i need to change anything while creating Product, SW Component, Third Party Technical System and Busniess System..etc
Regards
Blue

Hi,
I think u r bussiness system is alredy assign to other scenario.If u assigned once it will not show in the list.U have to import the bussiness system not assign.In ID select 'Objects' it will show all the Bussiness system details.Selet u r business system and add to u r scenario.
Also refesh cache objects using SXI_CACHE and refesh obeject in ID.
In ID Go to ENVIRONMENT->select Clear SLD Cache
Then refresh the all objects.
Thanks
Ravi

Similar Messages

** Not able to see my business system in our XI server - ABAP Stack

Hi Friends,
When I try to execute the function module 'LCR_LIST_BUSINESS_SYSTEMS', I able to see all the business systems which I am maintaining in the SLD of XI. But, few business systems are missing. I want to see that system thru this function module. Moreover, when I try to execute the tcode 'SLDCHECK' it shows error in one place of the screen for this function module. But, at the end of the summary it shows the message successfully.
Friend, how do I add the missing business systems thru the above FM?
Kindly help me.
Kind Regards,
Jegathees P

Hi Friends,
I have tested the destinations TCP/IP connections 'LCRSAPRFC' & 'SAPSLDAPI' from our XI system. Its working fine. My user id is also having the role 'SAP_XI_APPL_SERV_USER'. So, I think there is no problem in the RFC issues.
The exact error message while run SLDCHECK is as below.
17.09.2007                                                          Exchange Infrastructure: Test LCR Connection                                                                 1
Properties of RFC destination SAPSLDAPI
RFC host:        %%RFCSERVER%%
program id:      SAPSLDAPI_XID
gateway host:    aprins10
gateway service: sapgw10
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name:   aprins10.aprilbiztec.local
port number: 51000
user       : XIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code     4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:        %%RFCSERVER%%
program id:      LCRSAPRFC_XID
gateway host:    aprins10
gateway service: sapgw10
Testing the RFC connection to the SLD java client...
RFC ping was successful
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section   = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
Summary: Connection to the XI Profile works correctly
See the 3rd from the function module LCR_LIST_BUSINESS_SYSTEMS.
Friends, what could be the problem not to see the business system thru the above FM? But, the Business System works fine in RFC to RFC scenarios.
Kindly help me friends to solve this issue.
Kind Regards,
Jeg P.

I am not able to see the Business area in Discoverer desktop

Hi,
r
I am new to Discoverer
I have created a business area in EUL with user name and password as dewip/dewip in Discoverer administrator and now when I am logging in to Discoverer Desktop with the same user name and password to create workbook I am able to log in but I am not able to find the Business area in the Discoverer desktop.
After creating the business area do we need to do anything ( We don't even have save option to save also).
In Discoverer admin -> tools-> privilages I checked to see the privilages for this user ,but I could not see this user name(dewip) only.
Please help me ,its urgent.
Thanks,
gsr

Hi gsr
If you are working on Desktop and you change the default EUL but it doesn't stick this means that you don't have Admin rights over your machine.
In order to make these setting stick you need to have permission to update the system registry.
If you really cannot be given these rights then I suggest you ask you system admin to change the registry setting for you on your machine so that it reflects the correct EUL. You will find it here:
1. From the Start button, use Run | regedit
2. Open your registry to display HKEY_CURRENT_USER | Software | Oracle | Discoverer 10
3. Expand the folder called Database
4. Inside here you will see one set of settings that begin with AEUL and another with UEL. The format is like this:
AEUL_username_database and UEUL_username_database
5. You should see the name of the default EUL in the column called Data
6. Right-click on the setting you want to change and from the pop-up select Modify
7. Type the name of the EUL that Desktop should default to for that user in the database, making sure you type it in UPPERCASE
8. Click the OK button
9. Close the registry
When you now connect to Discoverer Desktop you should be in the correct EUL.
Note: this is only required if you don't have admin rights on your PC. If you do have admin rights then Discoverer will set this for itself.
By the way, if you or anyone reading this is unsure about manually editing your registry you should back it up first. Here are the steps:
To backup your registry, follow this workflow:
1. From your PC, click Start | Run
2. In the Run dialog box, type "regedit" and press the Enter key
3. The registry will now be displayed
4. From the registry menu bar, select Registry | Export Registry File
5. When the Export Registry File dialog box opens, give a name to the file you want the registry to be saved as
6. In Export Range, check "All" or "Selected Branch" - Selected Branch will export the current folder, so if you happen to have already navigated down tp the appropriate Discoverer Administrator folder you will be able to back it up
7. Click the Save button
8. Close the registry editor
To restore your registry, follow this workflow:
1. From your PC, click Start | Run
2. In the Run dialog box, type "regedit" and press the Enter key
3. The registry will now be displayed
4. From the registry menu bar, select Registry | Import Registry File
5. Navigate to the folder in which your registry is saved and locate the file
6. Click the Open button - the registry will be restored
7. Close the registry editor
Best wishes
Michael

I could not able to see Imported Business Package

Hi
I am using Standard Business Package for SAP CRM4.0 60.2.3; it is stored in PCD -> Migrated Content
I customized the Business Package and stored the content in my folder and transported the Business Package to Local (on Desktop) and Server (in server: C:\usr\sap\J2E\SYS\global\pcd\Export).
I did not deleted the Standard BP from PCD/Migrated Content
After importing the Customized Business Package from local system i could not able to see the Business Package in PCD.
I could not able to see the Customized BP in PCD.. , Whether that Standard BP should be deleted before Importing
What is the Default location it stores after importing?
Plz help me to solve this issue its very urgent.
Regards

Hi Michael
For Example In CRM BP there are set of Roles in that i took only Lead Manager Role and Stored that in my folder xyz as Deltalink and i also copied dependent object pertaining to that Role as Delta link.
In Transport Package i added all the dependent object and aswell the Role of Lead Management to that Package.
Before Exporting the Transport Package there is a option called (Include all objects on which the exported objects depend) i checked this option and Id of dependent objects i mensioned as ex: com.xyz
After doing this i transported my BP

Not able to see the Adapters@Integration Directory!!

Hi,
I have created Data types,Messages Types, Message Interface in Integration Repository.
I have created a scenario in Directory and assigned Business systems too(I'm doing file to file scenario) and while trying to create Communication channels i'm unable to see the adapters under Parameters Tab.
<b> Its not showing any Adapters in ADAPTER TYPE option and also
Transport Protocol and
Message Protocol are blank.</b>
What could be the reason??
Please guide me in order to complete my scenario.
Thanks in Advance.
LNM

hi madduri,
check these links....
Not able to see the adapter types in ID
Adapter Engine not found in ID
<b>check the last post here.... u will get ur answer !!!</b>
Adapter Type not found
Do these steps
1) Download XI7_0_SAP_BASIS_7.00_10_00.tpz which is available in a zipped format from the SAP Service Market Place.
2) Unzip the contents and copy the file XI7_0_SAP_BASIS_7.00_10_00.tpz (if you are using PI 7.0 or else download the file for your XI version) to
/usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
3) Goto Repository (Design)
4) Choose -> Tools -> Import Design Objects
regards
BILL
**mark the thread answered when u got ur answer

Not able to see the crystal reports XI version in the IE 7 and IE 8

Hi Team,
I am using web based application developed in VB,ASP,SQL SERVER,Crystal Reports(XI). I am able to see the Crystal Reports in IE 6. But i am not able to see the reports in IE 7 and IE 8. While clicking on the reports button it is showing the red X image top left cornor.
I am using CrystalActiveX viewer11 version for viewing the reports.
In IE 6,if the client using fiirst time for vieiwing the reports,it will ask the Activexviewer control prompt and says ok,it will display the reports.
Thanks and Regards
Eshwar

Thanks your advise.But we are using following crystal reports (XI) version and we don't have CRXI with R1 and R2.
CurrentVersion:11.0.0.895 ( CR Developer and Product Type:Full)
Crystal Reportviewer11 configured in the IIS which is version (5.0). and configured the virtual folder to C:\Program Files\Common Files\Business Objects\3.0\crystalreportviewers11\.
Our web application code also configured in the IIS at same level.
When the user wants to see the reports through the application,it will ask the Plugin of Crystal Report Viewer and user will download this plugin and it will save in the IE plug ins.It will ask only first time viewing the reports for the next onwards it will not ask or prompt of the Activex control.
So please suggest me, is there any upgrade version of this Crystal Reportviewer11 needs to be installed or any browser setting need to be configured for IE 7 and IE 8.
waiting for your reply.
Regards
Eshwar

Not able to see the PSA

Dear Experts,
I have enhanced the extract structure of 2lis_13_vdkon in R/3 with 5 fields which are exist in transfer structure.
I have replicated the data source in BI but unfortunately i have not deleted the data in the PSA.
After replication when i try to activate the data source the system is giving Dump and im not able to see the PSA also.
Please help me out.
When i manage on the data source to c PSA, its giving error like this
Invalid DataStore object name 2LIS_13_VDKON_BB: Reason: No valid entry in table RSTS
The Dump when activating the data source is :
Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
Exception              CX_SY_OPEN_SQL_DB
Date and Time          03.06.2009 09:46:55
How to correct the error
     Use an ABAP/4 Open SQL array insert only if you are sure that none of
     the records passed already exists in the database.
     If the error occures in a non-modified SAP program, you may be able to
     find an interim solution in an SAP Note.
     If you have access to SAP Notes, carry out a search with the following
     keywords:
     "SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"
     "CL_RSAR_PSA===================CP" or "CL_RSAR_PSA===================CM006"
     "_UPDATE_DIRECTORY_TABLES"
     If you cannot solve the problem yourself and want to send an error
     notification to SAP, include the following information:
     1. The description of the current problem (short dump)
        To save the description, choose "System->List->Save->Local File
     (Unconverted)".
     2. Corresponding system log
        Display the system log by calling transaction SM21.
        Restrict the time interval to 10 minutes before and five minutes
     after the short dump. Then choose "System->List->Save->Local File
     (Unconverted)".
     3. If the problem occurs in a problem of your own or a modified SAP
     program: The source code of the program
Regards
venu

Hi Venu,
The issue I think is the PSA was not deleted cleanly. If you try and activate the PSA you will get the dump again.
..Probably if you go through the ABAP dump you will notice it is pointing to the following code;-
   75 * Put the fields of PSA to database without check, otherwise error by
   76 * activation of table
   77
   78   IF p_psa_exists EQ rs_c_false OR
   79      i_new_version     EQ rs_c_true.
>>>>>     INSERT rstsodsfield FROM TABLE l_t_odsfield.
   81   ELSE.
   82     DELETE FROM rstsodsfield
   83       WHERE odsname = l_s_odsfield-odsname
   84       AND version = l_s_odsfield-version.
   85     MODIFY rstsodsfield FROM TABLE l_t_odsfield.
Put a breakpoint in the code in line 78. and activate the DS..the program should stop in 78...change the value of variable rc_c_false so that line 82 gets executed. This will clean up the PSA entries in table rstsodsfield. Now activate the DS and delete the PSA entries in the PSA table.
We faced the same issue and resolved it this way.
Thanks
-Saif

I am not able to see the installed BI content object in the DWB

Hi ,
I am not able to see the installed BI content object in the DWB
and the BI server is new one, this is the First BI content info object I am installing.
for example I have selected 0Account BI content info object for installation
I followed the below steps for installation.
1 Drag and drop of 0Account info object in right side window.
2.Grouping option selected as only necessary objects.
3.collection mode selected as manual collection then executed using execuiton button.
4.selected the install all below option.
5.finally installed the object with install in background option.
job got finished successfully.
please let me know if I did any thing wrong and please post valuable suggestions.
Regards.
Srinivas

HI
If yor installing first time you have to select info area and object catalogs also else it will go and stored in unassigned nodes. whatever your doing the option for installing the business content everything is same, but in right hand side panesl select the info ares etc.
regards,
Chandra.

ESB Console - not able to see the processes deployed.

Hi
I have installed SOA Suite 10.1.3.4 MLR#5.
I had created some Systems in the ESB system and deployed many processes in them.
Then i changed the <SOA_HOME>/integration/esb/config/pc.properties to:
oracle.tip.pc.services.notification.smtp.transport.cache.size = 10
oracle.tip.pc.services.hw.worklist.SessionTimeoutInMinutes=60
oracle.tip.pc.services.owf.callback.quartz_interval=1.0
oracle.tip.adapter.file.numProcessorThreads=1
oracle.tip.adapter.file.controldirpath=
oracle.tip.adapter.ic.repoConnMode=RMI
Then restarted the suite.
While starting the server i got an error:
oracle.tip.esb.monitor.MonitorException: An unhandled exception has been thrown in the ESB system. The exception reported is: "java.lang.NullPointerException
     at oracle.tip.esb.console.CacheManager.loadCache(CacheManager.java:298)
     at oracle.tip.esb.console.CacheManager.init(CacheManager.java:213)
     at oracle.tip.esb.console.CacheManager.bootstrap(CacheManager.java:178)
     at oracle.tip.esb.monitor.manager.ActivityMessageManager.initialize(ActivityMessageManager.java:192)
     at oracle.tip.esb.server.bootstrap.DesignTimeResourceAdapter.startControlListener(DesignTimeResourceAdapter.java:126)
     at oracle.tip.esb.server.bootstrap.DesignTimeResourceAdapter.startListeners(DesignTimeResourceAdapter.java:100)
     at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter.startESBListeners(ESBBaseResourceAdapter.java:649)
     at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter.setupRuntime(ESBBaseResourceAdapter.java:412)
     at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter.initializeESB(ESBBaseResourceAdapter.java:361)
     at oracle.tip.esb.server.bootstrap.ESBBaseResourceAdapter$PingTester.run(ESBBaseResourceAdapter.java:986)
     at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
     at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
     at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:825)
     at java.lang.Thread.run(Thread.java:595)
Now everything else is ok, except the ESB.
When i open the ESB console, i am able to see the ESB Systems which i created but not the ESB processes which were deployed.
When i try to redeploy the ESB processes through JDev, i get error:
error code: 2006: 5
summary: ESB DT Cache is not initialized. Maybe ESB bootstrap failed.
Fix: Please review ESB parameters for their correctness
Let me know if anyone has already solved this... Thanks
Inder

Could be a few things.
When you upgraded to 10.1.3.4 did you run the ESB SQL script? If not run it. I believe there is also one for the MLR patch, run this after.
In the console is the right server port, and host name specified in the Default System.
Make sure the dehydration store is up.
Is your database able to accept new connections, try login via SQL plus when you get this error. If you are running XE the processes, and sessions are set low. Increase in the init.ora
Also check the log.xml and see if it provides any more information, does it mention something like open_cursors exceeded. If so increase parameter in init.ora.
cheers
James

Not able to see the TPZ files

Hi,
Please help.
I am facing a problem while transporting a request to Production environment. I am using File Level Transport. When I create a transport file, it is successfully created in development system's /export location. Basis team moves the file production system's /import directory.
But here I am not able to see the imported tpzfile via Tool->import design objects , in Production environment.

Hi,
Please find below from sap help.
After a successful import, the Integration Builder moves the imported TPZ files into the directory <systemDir>/xi/repository_server/importedFiles. The support package stack of imported software component versions is displayed on the Details tab page for the relevant software component version in the Integration Builder. If an error occurs, this information is important for support. Take one of the following precautions to retain the overview of the imported XI content:
● If the release and the support package stack are clear from the file name of the TPZ file, simply leave the files in the directory importedFiles (see above).
If a file with the same file name already exists in the directory importedFiles, the Integration Builder adds the date and time of the import to the file name of the imported export file. This enables you to check which file was imported last.
● After a successful import, you can keep the packed files, from whose naming convention you can derive the support package stack. Move them into the directory importedFiles, for example.
If version conflicts occur during the import, you can process and resolve them in the Enterprise Services Builder. In the case of corrupt export objects, you can force the import and skip objects that cannot be imported. The import is then incomplete and references to objects that are not imported are lost.
Regards,
Venkata S Pagolu

I am not able to see the data By request id in ODS

HI Gurus,
I am trying to do data loads from flatflies based on Region to ODS(We have flat files based on region for each region we have one flatfile) .I have loaded 2 files into ods.But when i am checking the data in ODS by request id .I am seeind 2 regions data on one request id .I am not able to see the data for other request id.
For example:
We have two flat files one is region 1: 5100 and region 2: 5030
Request id 1: contains region 5100 data
request id 2 : contains region 5030 data.
But when i am checking the data in ODS its showing 5100&5030 data onn request id 1.I am not seeing any data for requestid 2.
Please help me out.

Hi,
Active data cant be seen by Request id but definitely change log table contains request id and list of records per request
Go to Manage ---> Contents tab --> New Data. Over here you can enter the request number and check the data request wise.....The same can be done for Change log
Check the log in SM37 if it exists there or not.
May be the number of records will be more and depending upon the system processses it will be taking time to load.ID request is loaded to ODS then it could be activation time
Hareesh

I am not able to see the new drive

I have a Sun Blade 2500 with SUN 5.9 OS installed.I have on hard disk drive in it and now i attached another drive in this system but i am not able to see the new drive when i run the below command
bash-2.05# echo | format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/scsi@4/sd@0,0
Specify disk (enter its number): Specify disk (enter its number):
==============================================
Although i can see two drives in the output of below command:
bash-2.05# iostat -E |grep Size
Size: 73.40GB <73400057856 bytes>
Size: 73.40GB <73400057856 bytes>
Size: 0.00GB <0 bytes>
Edited by: 842294 on Apr 6, 2011 4:40 AM

Resolved
bash-2.05# cfgadm -c configure c0
bash-2.05# echo | format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/scsi@4/sd@0,0
1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/scsi@4/sd@1,0
Specify disk (enter its number): Specify disk (enter its number):

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Not able to see the tree on the jspx page after running

Hi All,
This is something strange.I am dragging the VO on the page fragment from the data control as adf tree. And I am using the panel collection as component for adf tree.
After running the jspx when I am moving to the fragment I am not able to see the tree.
However when I am running the AM it is working properly for the view objects and view link used to populate the tree.
Can anybody put some thoughts on this.
Thanx
Kanika

Thnx for your replies..
I am dropping taskflow as region . I am not using the switcher component.
On left side of the page the tree is visible now. but the taskflow is not refreshing on the click of the tree node based on the value of the node.
Please advice how to accompolish this now??

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

Not able to see the Business systems

Similar Messages

Maybe you are looking for