Not able to select Operation Mapping in Directory

Hi,
I am doing a SOAP to SOAP scenario. Both the inbound and outbound interfaces have 2 operations each. I am facing a strange problem -
1. in the interface determination, I am able to select the inbound interface for both the operations of the sende interface (value is the inbound interface). But when I wanted to selct the operation mapping, it shows the defined OMs from the repository but when I select them, it does not show up in the box. I tried using both java 1.6 and 1.5 JDKs.
2. Since we can have only one sender agreement (though the sender interface has 2 operations), with one communication channel (SOAP sender), how to direct it to the receiver side operations? I am not able to create 2 receiver agreements as it is compalining that it is a duplicate object. If I can not do this, I would not be able to specify the soap action in the receiver channel which actually routs it to the right operation on the receiver side.
Any ideas?
Thanks,
Sri

Hi,
>>Since we can have only one sender agreement (though the sender interface has 2 operations), with one communication channel (SOAP sender), how to direct it to the receiver side operations? I am not able to create 2 receiver agreements as it is compalining that it is a duplicate object. If I can not do this, I would not be able to specify the soap action in the receiver channel which actually routs it to the right operation on the receiver side.
You need to use dynamic configuration, check my rely on this thread
Re: Consuming web services provided 3rd
Regards
Suraj

Similar Messages

COOIS report: not able to select operations based on work centers

Hi All,
When accessing the COOIS report using operation listv& selecting the std profile.I need to get the operation perfomred on specific work center.
I enter the work center & plant code in the selection fields available in the "select at operarion level" & i get the all the work center.
Need to get list of operation performed at the entered work center.
The requirement is due to the reason that a order is performed in two or three production facilities & production guys needs to look at operation list for given work centers.
Regards
Vineet

Hi,
This one of the options we had explored, but it would be better if we can get the report by work center. The focus is to reduce the effort to get the report as there is need to get the same report for atleasr 8to 10 different group of work centers ( which are not in serial nos).
We would then need to put the work centers in the filters & save the layout.
Regards
Vineet

Not able to select physicalschema directory for file data server in ODI 11g

Hi,
I am a beginner to ODI tech and stuck up with an error while doing a tutorial (mentioned in this link - http://st-curriculum.oracle.com/obe/fmw/odi/odi_11g/ODIproject_ff-to-ff/ODIproject_flatfile-to-flatfile.htm).
While creating a physical schema for default file server(FILE_GENERIC) , I am not able to select schema directories and the name field with value 'FILE_GENERIC.Directory' is grayed out (non editable)
I have gone through many documents but could not find any relevant information for this.
So could you please let me know if any configurations required for this?
Thanks,
Anusha

Hi Oleg,
Thanks for your reply.
While creation of physical schema , Name field is grayed out , is that the default behaviour of the screen? because in the tutorial I could see the name filead is pointing to a file directory path.
Thanks,
Anusha

I am not able to select a new network printer just installed at work to print to from Firefox. I have tried to reset the printer settings, but this did not work. Do I need to map Firefox to this new printer?

We recently had a new printer installed at work that has been set as the Default printer on my computer. When I go to print something from Firefox, I am not able to select the new printer from the printer window in the print box. The new printer does not show up

From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions.

** Not able to create Value Mapping Table in Integration Directory

Hi friends,
    I am not able to create value mapping entries like below in ID.
Agency :    Computer1                Agency : Computer2
Scheme:    Country                     Scheme: CountryCode
Value for Computer1                   Value for Computer2
Australia                                     AU
India                                           IN
Austria                                       AU
Note that I have assigned the same country code 'AU' for the Countries 'Australia' & 'Austria'. But, when we assign 'AU' to 'Austria', the system asks question as below:
Value mapping already exists
          Australia | AU
          Austria | AU
Do you want to delete it from the existing group and assign it to the current group instead?
                   Continue       Cancel
Though choose any of the option, I am not able to assign 'AU' to 'Austria'.
Friends, this is my requirement. How do we solve this ?
Kindly help me.
Kind Regards,
Jeg P.

Hi Koen,
    I tried this. Its working fine now. Thanks for giving guidance to me. Then, I have another doubt. Suppose if we create 2 sets of VM table, (First Receiver will act as 2nd one how do we achieve this). For Ex:
Set 1:
       Source Agency: SYS1              Target Agency: SYS2
       Source Scheme: CODE             Scheme : DEPT
         A                                            HR
         B                                            Accts
         C                                            Finance
Set 2:
       Source Agency: SYS2              Target Agency: SYS3
       Source Scheme: DEPT             Scheme : GRADE
         HR                                             Second
         Accts                                          First
         Finance                                       First
In this case, I followed the same logic which you said, but I am not able to create. I think the main point is GUID here. If you have any idea, kindly tell me.
Kind Regards,
Jegathees

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

Hi i am currently editing clips in premiere pro cc but everytime i go to change the speed not the duration of a clip it will not let me select it - also when i go to effect controls it will not let me select time mapping? please help

savannahp
What version of Premiere Elements and on what computer operating system?
Please review the following that I excerpted from an older post here regarding Adobe's PRE_help comments about Hollywood Effect and mention of
Red Noir. Does any of the following apply to any of what is happening to you.
- Whenever I try to add an effect from the Hollywood Looks menu, it brings up a warning that all my previous effects on that clip will be deleted. However it will let me add those same effects *after* applying Hollywood Looks.
This is because of how the Hollywood Looks are designed to be used. Since these are effect presets (multiple effects in combination) that result in a specific "look"; they are best applied in isolation. If any previous effect is applied and we still allow a Hollywood effect to be applied, we will not be able to see what the effect does clearly. For e.g. if you already have a Gaussian Blur effect applied to your clip, and then we allow you to apply the "Red Noir" Hollywood effect, the fact that the "Reds" in the scenes will be highlighted and the others converted to B/W will not be clearly seen since the content is already blurred out. So any previously applied effects was designed to be removed. This holds good even if you apply a Hollywood look "on top of" another one. The previous one will be replaced. Having said that, you can customize the look further by either tweaking an already applied filter or by adding a newer effect on top. That is the reason you can apply an effect on top of the Hollywood Effects and not vice versa.
Please review and consider and then we can proceed from there if necessary.
ATR

Not able to select sales area for reference BP in CRM system

Hi All
I am not able to select sales area data for the reference customer copied from r/3 to crm sysytem even through ORg. structure is properly maintain ( Object permitted in determination is ticked).
The field " Choose sale area is subpress/grey.
Please help me for the same.

Hi Kishore,
So you manage get into Sales Area Data, but when you
try to select Sales Organization you get nothing?
(click Sales Org combo but no selection appear)?
How about field Distribution Channel and Division?
I am afraid some of these fields still not properly
set/transported to CRM.
In R/3, this BP has maintained under same Sales Area
which mapped in CRM Org Model right ?
What is role in CRM when you open the BP?
Have you check if there is any error in middleware
when downloading BP data to CRM?
Cheers,
Gun.

Logic Pro 9 - Not able to select plugins via Inserts / Audio Units.

Hi
I have the program Logic Pro 9 version 9.1.6 (1700.43) (32- bit)
I use plugins like for example SampleTank and Realstrat . Everything has until recently worked fine, but I now have a problem.
When I choose a plugin I usually put the mouse on the box 'Inserts', press ALT and then a menu appears. Here I, among many menu items, at the bottom see ' Audio Units ' . At this point I usually could choose, for example SampleTank , .. but now I can only choose Apple features. That is to say - I can not choose my plugins in this menu anymore.
I've been around online and search . Here I was recommended to delete a file called com.apple.audiounits.cache . I have done this, but the problem is not solved.
I also have updated the operating system with latest MacOSX10.7.5 update . This has not helped .
All my plugins are also visible in Logic Audio Units Manager, and I can see that they are being loaded when Logic starts up.
The plugins also still works in projects created within the problem occurred. That is, - I can open for example SampleTank in a track in a project that is created and a half years ago.
So the exact problem is that I, in new projects, is not able to select plugins via Inserts / Audio Units .
Can you help me solve this problem?
Regards Henrik

Hekke44 wrote:
I do not think it is very user friendly, I must say.
For users of this system, it must surely be obvious that you very often have to choose musical instruments, also from instrument plug-ins.
Yes, often. That is why it is very obvious and simple for any experienced user.
Hekke44 wrote:
Why on earth is it so complicated to choose a musical instrument? If you are not currently using this system every day, you forget the such a detail about having to press down for several seconds to select an instrument.
I do not think it is complicated at all. And you do not have to press down for several seconds. I just timed, it is 0.4 seconds of clickholding. The holding is functional: you won't load a new instrument (and possiblly loose any work you had done on your sound) just because you accidentally clicked on a slot.
Hekke44 wrote:
There should be a nice big green button on the screen that read 'Select musical instrument', - then a menu where you can choose whether it should be one of Logics musical instruments, or a plugin instrument.
It would be user-friendly.
What is your view about these things?
You are basically saying it should be dumbed down to the level of some "any-kid-or-adult-idiot-can-use-it-out-of-the-box" smartphone app. I think you are overlooking that this is a Pro program, not a toy. I think you try to blame the software for the fact that you didn't know how to operate it. You're avoiding responsability. That's my view.

I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them.

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them. How do I completely clear my ipod music, and how can I solve the syncing problem?

Sync works the same way it always has, connect the device, select the content desired to sync and sync.
All the media should be in iTunes already, iDevices are not and have never been backup devices.
If this is a new computer, move the content from the old computer to the new computer.

Not able to select images in iphoto 8????

Since I've installed iphoto 8, I'm not able to select my pictures as I did with iphoto 6. When adding images through yahoo mail for example, I was able to before locate my iphoto folder, and it would give me a drop list of all the pictures. With iphoto 8, all I see is "iphoto library" and its faded out and I can't select it.
Does anyone know if this is just the way iphoto 8 works, or is there a way to fix this. The only solution I have found, is I have to copy the pictures on to my desktop and then select them from there.
Please help
Thank you in advance

THe basic answer is to export them to a desktop folder and access them form there
for a comnplete discussion see TD's post here -- http://discussions.apple.com/thread.jspa?threadID=1199193&tstart=15
Larry Nebel

How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

Use File/Import/Movie and navigate to the file.

Not able to find the mapping for table W_CUSTOMER_STATUS_HIST_F_TMP

Hi All,
I have implemented the Out of Box solution of Order Management Analytics module with 11.5.10 version of Oracle EBS and respective adopters. Under the same I am not able to notice any mapping to load the data into W_CUSTOMER_STATUS_HIST_F_TMP table and due to which it causing few reports under order management.
Could you please tell me the mappings name for this Target Table so that I can verify from my side if it has been missed or so?
I am finding this W_CUSTOMER_STATUS_HIST_F_TMP table is getting used as Source Table under the folder of PLP for the mapping as,
PLP_CustomerStatusHistoryFact_Extract
PLP_CustomerStatusHistoryFact_Old_Customers_Load
and PLP_CustomerStatusHistoryFact_Extract
Thanks,
-Vinay

Not sure this would help but As per data lineage guide, it says PLP_CustomerStatusHistoryFact_Extract mapping populates this table from series of different tables. Later, From temp table it goes to W_CUSTOMER_STATUS_HIST_F table via mapping PLP_CustomerStatusHistoryFact_New_Customers_Load
~r

Not able to select speaker setup in creative audio cons

Hi, I'm using Creative X-FI Music. Due to a recent re-installation to Vista, after re-installation of drivers and software (with updates from creative support website), I'm still not able to select the speaker setup directly from the audio console. This has prevent me from calibrating my 5. speaker setu
ps.
Please help? Thanks....

what's your os? if you have xp, you should try sp2...that fixed the problems i was having with my card when i upgraded...try telling windows to go to 5. sound through the sound devices in control panel and then go back to surrmixer and see if that works...

Not able to select a row in ALV in Webdynpro

Hi everyone,
I have developed a webdynpro application and I have declared component usage for SALV_WD_TABLE.
The data gets displayed in the ALV, but always the first row is selected.
When I try to select another row,I am not able to select.
Could anyone please suggest what might be the problem ?
Thanks in advance.
Regards,
Kumudha.

Hi Manas,
Thanks for the inputs.
I am placing the code below for your reference.
I try to change the below as Display Text as Code...But it is not happening Plz check
method wddoinit.
if wd_this->ls_setup is initial.
    select single * from yyua_c_setup into wd_this->ls_setup
      where system_id = sy-sysid.
endif.
"adjustments for ALV
data lo_cmp_usage type ref to if_wd_component_usage.
lo_cmp_usage =   wd_this->wd_cpuse_alv( ).
if lo_cmp_usage->has_active_component( ) is initial.
    lo_cmp_usage->create_component( ).
endif.
data: l_ref_interfacecontroller type ref to iwci_salv_wd_table .
l_ref_interfacecontroller = wd_this->wd_cpifc_alv( ).
data: l_value type ref to cl_salv_wd_config_table,
        lr_header_t type ref to cl_salv_wd_header,
        lv_text type string.
l_value = l_ref_interfacecontroller->get_model( ).
data: lr_column_settings type ref to if_salv_wd_column_settings,
        lr_input_field type ref to cl_salv_wd_uie_input_field,
        lr_column type ref to cl_salv_wd_column.
Set column title and position
lr_column = l_value->if_salv_wd_column_settings~get_column( 'CSINSTA' ).
lr_column->set_position( 1 ).
lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/REQUEST_NUMBER' ).
lr_column->r_header->set_text( 'Installation' ).
lr_column->r_header->set_ddic_binding_field( '00' ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'ERFUNAME' ).
     |
lr_column->set_position( 18 ).
lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/ACTIVITY_DATE' ).
lr_column->r_header->set_text( 'Job profile ext' ).
lr_column->r_header->set_ddic_binding_field( '00' ).
Hide columns
lr_column = l_value->if_salv_wd_column_settings~get_column( 'ERFTSTMP' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'AETSTMP' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'STATUS' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'PRIO' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'ISSUE' ).
lr_column->set_visible( 0 ).
data: lr_functions type ref to if_salv_wd_function_settings,
        lr_function type ref to cl_salv_wd_function,
        lr_button_t type ref to cl_salv_wd_fe_button.
Add self-defined functions in toolbar
lr_functions ?= l_value.
lr_function = lr_functions->create_function( 'SELECT' ).
create object lr_button_t.
lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/VIEW' ).
lr_button_t->set_text( 'Select' ).
lr_function->set_editor( lr_button_t ).
data : LR_FUNCTION_SETTINGS TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
create object LR_FUNCTION_SETTINGS.
SET row selectable as true
CALL METHOD LR_FUNCTION_SETTINGS->IF_SALV_WD_TABLE_SETTINGS~SET_ROW_SELECTABLE
EXPORTING
VALUE = ABAP_TRUE.
endmethod
Regards,
Kumudha.

Not able to select Operation Mapping in Directory

Similar Messages

Maybe you are looking for