Not accepting new database

I have two different database connections in my tnsnames.ora I setup a new connection for jdeveloper to connect to, but it does not recongize the new connection. It keeps looking at the old connection, even when I delete the old connection in the tnsnames.ora file it still finds the connection, when I run the application.

What type of connection, thin or OCI?
For thin connections, jdeveloper doesn't use tnsnames.ora, the connection information [hostname, port, SID, etc] is stored directly in JDeveloper.
Rob
Team JDev

Similar Messages

Why i can't not create new database in oracle 10g express

why i can't not create new database in oracle 10g express?
should i use oracle 11g standard edition?
thanks

In Oracle a schema is what a 'database' is in Sqlserver.
And if you would have been aware about the limitations of XE, you would have known you can only create *1* (one) database using Oracle XE.
However, probably you don't need a new database at all, and a schema will suffice.
Sybrand Bakker
Senior Oracle DBA

Ipad will not accept new version of itunes

ipad will not accept new version of itunes

What version of iTunes are you trying to install. If its 10.6.3 or 10.7, those versions are installed on a computer, not the iPad.
 Cheers, Tom

Issue with HP 4225 officejet , Not accepting New Print Cartridge

dear Sir,
My HP officejet 4225 all in one is not accepting the New cartridge ( black 27b). From last few days i am experincing horrible things in printer which i m not able to understand, like from two three days it takes 15 minutes to print one page.
it starts printing ,prints one line and stop, wait for 1 min again prints few lines again become silent.in this way it takes 10 mins to print one normal page.
Yesterday it starts displaying error message "Remove and check right cartridge".I checked it ,cleaned the surface of black catridge (27b)but nothing happen.i installed an old empty catrdige (27b) it started working again. i replaced it with the existing cartridge it displays the same message.
Today I bought a new cartridge ( 27b) after instaaling it again display the same error message. I replaced with another very old cartridge (27) it again works ,it just displays black cartridge Empty.
now i m surprised a running printer suddenly not accepting the installed cartridge. accepting the old cartridges not accepting new cartridge.
one more thing the speed of printing has become normal after this incidence. I did a facory reset two days ago to check wether speed of printing improves or not? but it didnot improved however with the issue of cartridges ,when using old crtrdige (27b, 27) using only colour printout the printing speed is ok. i,e it does not start and stop.
pls help with this issue . i m totally stuck.
Thanking you,
Rahul Vijay

Oh, I don't think you are stuck with USB. From your post above:
When I select network, I get three options:
View Network settings
Restore Network Defaults
Advanced
With the Ethernet unplugged, select the middle one. Then reset your router by removing its power for a few seconds, then plug back in. Turn the printer off then back on.
Finally, plug in the Ethernet cable.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Icloud does not accept new Apple ID. What can I do to get it to accept.

Icloud does not accept new Apple ID. What can I do to get it to accept.

Please try logging in with your current Apple ID here in order to test: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/directToSignIn?loc alang=en_US
If your new ID doesn't work try logging in with your old details as maybe the change didn't work as first thought?
Regards,
Steve

TS4212 why my computer is not accepting new latest version ? 10.6 version i have macbook i have apple software cd

why my computer is not accepting new latest version 10.6 i have apple cd new latest version cd why is showing me mac
ox cannot be installed to this computer ? please help me

You can't use a disk which originally shipped with a Mac on a different Mac model. You also can't install Mac OS X 10.6 on a PowerPC Mac.
(67906)

ICloud now insisting on previous Apple id. Cannot log in. Will not accept new id and emails old id – a closed email account – with info. How do I fix?

iCloud now insisting on previous Apple id. Cannot log in.
Will not accept new id and emails old id – a closed email account – with info. How do I fix?

If the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. You can now use your current password to turn off Find My iPhone, even though it prompts you for the password for your old account ID. Then you can go back to https://appleid.apple.com and change your ID back to the way it was.

MacBook Air not accepting new password.

I updated my MacBook Air to new OS and had to restart system, now its not accepting my password. I went online and reset password a couple of times but still cannot get Mac to accept latest password. Ideas?

You can reset your password with the install cd or usb ...
Follow these steps to reset a password when there is only one administrator account on the computer, or if the original administrator account needs a password reset. "Original" administrator account refers to the one that was created immediately after installing Mac OS X. If the original administrator password is known, that administrator account may be used to reset the passwords of other administrator accounts using the steps described above. These steps require an optical drive; if your Mac does not have an optical drive and you have a Mac OS X v10.6 Install disc, see below.
Start up from a Mac OS X Install disc (one whose version is closest to the version of Mac OS X installed). Usually, you can start from the disc by putting it in your computer, restarting, and holding the C key. Or, put it in the computer and click the Install or Restore icon you see in the disc's main window (after which the computer will start from the disc without you needing to hold C). Or, you can use Startup Manager or the Startup Disk preference pane to select the Install disc.
Choose a language, click the arrow button to continue,
Mac OS X v10.6 or later: Choose Password Reset from the Utilities menu.
Mac OS X v10.5 or v10.4: Choose Reset Password from the Utilities menu.
Mac OS X v10.3: Choose Reset Password from the Installer menu.

ICloud not accepting new connections

my iTunes library has been working just fine though my mac air, now for some reason iTunes won't connect to the iCloud and play anything, music tv, nothing? all it does is occasionally tell me that iCloud in not accepting any new connections?
help please?

Judie...
I responded to you here > https://discussions.apple.com/message/16482316#16482316
Please do not startup duplicate discussions. Thanks!

Mac mail will not accept new messages

been working fine but after trying to send a big photo file, MacMail stopped accepting new messages and requires minutes to send out new messages. I have checked and rechecked all parameters. help!

Have you quit and reopened Mail?
Empty the Mail cache in your Home Folder Library>Caches>com.apple.mail>Cache.db. Just move Cache.db out to the Trash -- not the enclosing folder -- with Mail closed. Don't empty the Trash. If it doesn't help, then just put it back.

IPad will not accept new Enterprise password

I normally am able to access my workplace email (via Microsoft Outlook Exchange) on my iPad. I was required to change my Enterprise (and Outlook) password on my workplace computer. Now iPad will not accept the new Exchange account password which renders all other functions on the iPad inoperative. How do I bypass that Exchange password prompt?

We have similar issue with our corporate ipads.
Enter the new Exchange password then reboot the iPad. Exchange should accept the password after reboot, seems to be some peculiar quirk!

CSM not accepting new SSL connections

Hi,
Could some one please help on me on this.
My CSM is not accepting any new SSL connections for around 4 hours now. I have manaully rebooted the CSM now and it seems to be working fine.
Teh CSM was working fine without any problem and I have not done any changes on the module. I would like to know why suddenly CSM not operational?
Is ths hardware issue or software?
I am running 4.1(3) software versin on the CSM.
Thanks in advance. Your help would be highly appriciated.
Regards
Alex.

Hi Alex,
We would need to see a failed connection on the CSM's port-channel to see at what point the connection fails and multiple showtechs taken during the issue to see what, if any, error counters were incrementing. Without this kind of data, there is no way to tell what the root cause of the failures were.
Given that a reload of the module recovered the connectivity, it is likely not a hardware issue.
In the event that this was to reoccur, I would recommend the following action plan:
Get a showtech from the Supervisor
Using SPAN, start a capture on the CSM port-channel. The source interface of your monitor session would be Po<256 + csm-slot>. For example, if the CSM is in slot 4, then the source interface of your monitor session would be Po260.
Let one or more connections fail
Stop the capture
Get a second showtech from the Supervisor.
Also, as a proactive measure, I would strongly recommend an upgrade to the latest CSM 4.2(x) or 4.3(x) software as the 4.1 code is very old and there have been many bug fixes since then.4.2(13) would be a good choice, unless you need features of the 4.3(x) stream.
Also, note that the CSM is now End-of-Life, as well as the 4.1(x) software. Any bug fixes that are implemented until the End-of-Engineering support will only go into the 4.2(x) and 4.3(x) streams.
Hope this helps,
Sean

Can not create new database

hi all,
i am new to oracle, so it may be a very simple question for you, but i couldn't find the answer though i read all the documentation and manual stuff.
i have already installed trial version of oracle 8.1.7 , though i had some warnings( or errors) which i had ignored. from the programs menu i tried to open enterprise manager, DBA stuido or console.. whatever, i am promted to login a user name and a password. Can someone please tell me what user name and password should i enter at first, or from where i should start.
i also tried creating a new database from the database config assistant, and faced with "EOF on the communication channel" at the beginning of database creation process, it can't go further.
i just want to create a sample database to start with .
Please any help and suggestions ?
thanks in advance.
Cheers :)

okey guys, since no one replied my question
i gave up, creating a database and now i am using another oracle database server's sample database through network.
this time i encountered another strange problem. When i am trying to start OAS through the control panel>servies as described in the docs, it can't start saying that : "can't start the OAS on this computer, server didn't throw any error. this may be because of an inner problem of windows or service. See your admin for help"
any idea what to do or how to start Oracle application server?
thanks for help
cheers :)

My mac mail not working, not accepting new password

My mail (mobile me) that is now icloud, is not getting new mail. It is there on web mail, but not on my lap top. It keeps saying my password is incorrect. I have changed password twice and still no luck...any suggestions?

Feldblume wrote:
My operating system is OS X 10.6.8. Could this be because I do not yet have Lion?
Exactly so. Strictly speaking Lion 10.7.2 is required for iCloud, and on that Mail is set up automatically.
Snow Leopard cannot access most of iCloud's facilities, however you can set Mail up manually to access your email. The method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
The situation with iCloud and Snow Leopard is described in detail here:
http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html

Ipod Touch will not accept new podcasts

I use my ipod touch a lot for listening to podcasts while riding my bicycle. I have playlists set up so my favorites can play in the order I place them. Today I noticed that one of my podcasts was not showing up in the playlist on the ipod. I tried dragging it over to the device and synched it multiple times. Then I looked at the podcasts on the Touch through iTunes to see that different podcasts were there but grayed out with a grey, dotted circle next to them.
So after some searching I read that this can be caused by the ipod being full. So even though I showed over 3gb free, I deleted some music and podcasts to free up another 3 gb. No luck.
Then I read that I should click on "Manually Manage music". I did that and still no luck.
I've searched around the forums to find several people complaining of this but it is mostly concerning music and authorizations etc but these are free podcasts so I can't imagine there's any issue like that.
Does anybody have any idea why this would be going on? I'm ready to restore the thing but I remember that process as being a big pain.
Thanks!

Forgotten RESTRICTIONS Passcode
- Place the iOS device in Recovery Mode and restore via iTunes. For how to restore: iTunes: Restoring iOS software
You have to either:
- Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
- Restore to factory settings/new iPod
Also, are the apps compatible with iOS 6? Many apps now require ios 7. hOWEVER.
Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

Not accepting new database

Similar Messages

Maybe you are looking for