Not been receiving emails for 2/3 days - this is only affecting 1 user on this iMac

I have checked 'connection doctor' returns "connection and login to server succeeded" find it odd that all is OK on another user, same Mac and on other devices!

Hello Goudy Bold,
After reviewing your post, it sounds like the mail account is working with other devices. So it sends emails but not receive them on this one iMac user? I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
It sounds like you have already seen this article. 
If you can’t send or receive email on your Mac - Apple Support
Since there does not seem to be a connection issue there may be an issue with the account in Mail. One thing that can be done is remove and readd the account. 
Mail (Yosemite): Set up Mail with your email accounts
Remove an account
When you remove an email account from Mail, the account’s messages are deleted and no longer available on your Mac. Copies of messages remain on the account’s mail server and are still available (from webmail, for example).
Important:   If you’re unsure whether messages you want to keep are still on the mail server, move or copy them into a mailbox stored on your Mac (the mailbox appears in the On my Mac section in the Mail sidebar) before you delete the account in Mail.
Choose Mail > Preferences, then click Accounts.
Select an account, then click Remove .
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Similar Messages

  • Emails I send appear in the Sent folder but don't always arrive. This  is happening increasingly often and some important messages have not been received. Does anyone else have this problem?

    All mails show as Sent but are not always being received, meaning I can't rely on my iPad for important
    communications. This problem has been particularly bad for the last 2 weeks. Has anyone else found the same?

    Issue resolved in iCloud->iOS device forum.

  • TS4083 Why have I not been getting email suddenly (started three days ago)

    I have not receved an email since Friday April 5th.  No changes to settings.
    I can still send emails apparently.

    Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
    I suggest that no response is made to this duplicate thread. 

  • Since updating my ipad 2 to ios6, I have not been receiving incoming emails from my yahoo account.  I get the message I am not connected to the server.  I have no idea how to fix it.  Any suggestions.

    Since updating my ipad2 to ios 6, I have not been receiving my yahoo email messages.  I went into the yahoo account but the incoming section does not appear, only the outgoing mail.  Any suggestions?

    You may also want to just wait a day or so. There seems to be randomly persistent issues with yahoo mail. NO idea if it's totally tied to iOS6 or not, but Yahoo was having issues before the software upgrade. I went through 2 periods where my 2 separate yahoo accounts wouldn't download mail for about a day or so before it resolved itself.
    I simply went to the main yahoo site, which puts me on the mobile site and accessed my mail via the web in the mean time.

  • Accounts that have not been logged into for more than 90 days

    Hi Folks,
    Good Day.
    Can anyone help me to update below powershel script?
    below script find in my domain all the AD users accounts that have not been logged into for more than 90 days and export the report to .csv file. in addition what I want:
    1. OU=Others, Sales --> exclude this OUs
    2. Disable all the user based on 90 days export report .csv file 
    import-module activedirectory 
    $domain = "test.com" 
    $DaysInactive = 90 
    $time = (Get-Date).Adddays(-($DaysInactive))
    $timer = (Get-Date -Format yyyy-mm-dd)
    # Get all AD User with lastLogonTimestamp less than our time and set to enable
    Get-ADUser -Filter {LastLogonTimeStamp -lt $time -and enabled -eq $true} -Properties LastLogonTimeStamp |
    # Output Name and lastLogonTimestamp into CSV
    select-object givenname,Name,@{Name="Stamp"; Expression={[DateTime]::FromFileTime($_.lastLogonTimestamp).ToString('dd-MM-yyyy_hh:mm:ss')}} | Export-Csv c:\temp\90DaysInactive-$(Get-Date -format dd-MM-yyyy).csv –NoTypeInformation
    Many thanks for advance Help:

    Hi Anna,
    Good Day.
    Many thanks for your responce.
    with your help i can manage to exclude the OUs as wellas can get the .csv report via mail.
    Now i want to disable all the user based on 90 days export report .csv file.
    could you help me on this please? the report will come everyday like below:
    filename=90DaysInactive-dd-mm-yyyy.csv
    sample output:
    Given name User Name
    Last LogOn
    Test User1 user1
    03-10-2006_05:30:59
    Test User2 user2
    02-10-2006_12:00:34
    import-module activedirectory 
    $domain = "test.com" 
    $DaysInactive = 1 
    $time = (Get-Date).Adddays(-($DaysInactive))
    $timer = (Get-Date -Format yyyy-mm-dd)
    $FileName="c:\temp\90DaysInactive-$(Get-Date -format dd-MM-yyyy).csv"
    $from = "[email protected]"
    $to = "[email protected]"
    $smtpHost = "smtpservername"
    $Subject = "90 Days Inactive Accounts"
    $body = "90 Days Inactive Accounts report"
    # Get all AD User with lastLogonTimestamp less than our time and set to enable
    Get-ADUser -Filter {LastLogonTimeStamp -lt $time -and enabled -eq $true} -Properties LastLogonTimeStamp | where {($_.distinguishedname -notlike "*OU=HR*") -and ($_.distinguishedname -notlike "*OU=OT*")} | 
    # Output Name and lastLogonTimestamp into CSV
    select-object givenname,Name,@{Name="Last Logon"; Expression={[DateTime]::FromFileTime($_.lastLogonTimestamp).ToString('dd-MM-yyyy_hh:mm:ss')}} | Export-Csv c:\temp\90DaysInactive-$(Get-Date -format dd-MM-yyyy).csv -NoTypeInformation
    Send-MailMessage -From $from -To $to -Subject $subject -cc $cc -SmtpServer $smtpHost -Attachments $FileName -Body $body -BodyAsHtml
    Thanks for your advance help.

  • Why am I not receiving email for verifying my account?

    Why am I not receiving email for verifying my account?

    I sign in on appleid.apple.com and select manage apple id and sign in.  Everything is correct.  That address has been verified.
    That is o.k., then.
    However, on the left side of the screen the only option is verify your email address, nothing about security
    I don't understand, what on the left side of the screen?  If you tried to verify a second email address, you should be either seeing "verified" or "verification email sent". The second email address may already have even verified for a different Apple ID.
    Have you already looked at the link below?
    If you didn't receive your verification or reset email - Apple Support

  • After the last update that I received I'm getting "This version of iTunes has not been correctly localized for this language please run the English version". How do I fix this?

    After the last update that I received I'm getting "This version of iTunes has not been correctly localized for this language please run the English version". How do I fix this?

    Hello LKBrown608,
    The article linked below provides some useful information that can help get iTunes running on your computer.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Cheers,
    Allen

  • I have not had access to icloud email for over a day now...anyone else having this issue?

    I have not had access to icloud email for over a day now...anyone else having this issue?

    The first trouble shooting steps are restart and reset: Turn your iOS device off and on (restart) and reset
    If problems persist Use iTunes to restore your iOS device to factory settings

  • HT201209 My gift has not been received by email. How long does it take to come through?

    My gift has not been received by email. How long does it take to come through?

    Mine hasn't either. Did the recipient ever get it!

  • Unable to send and receive email for external domain

    Hi,
    I just installed Exchange Server on my 2K8 domain controller. I have set up the send connector and made necessary changes to the receive connector as well. I have updated the DNS records as well on my domain registrar. I can access OWA from outside my companies
    network and is able to send and receive emails for my domain but unable to send or receive emails to any other domain. I have checked the delivery report and it says that the message has been queued on the server. 
    I also did nslookup. Results mentioned below:
    C:\Users\Administrator>nslookup www.google.com
    Server:  localhost
    Address:  ::1
    Non-authoritative answer:
    Name:    www.google.com
    Addresses:  2404:6800:4009:802::1014
              74.125.236.145
              74.125.236.148
              74.125.236.146
              74.125.236.144
              74.125.236.147
    C:\Users\Administrator>nslookup www.microsoft.com
    Server:  localhost
    Address:  ::1
    DNS request timed out.
        timeout was 2 seconds.
    DNS request timed out.
        timeout was 2 seconds.
    *** Request to localhost timed-out
    Any help would be much appreciated!

    Hi hg01,
    According to your description, I notice that you installed Exchange server on a DC.
    It is not recommended to install Exchange server on a DC. I suggest install Exchange server on a member server. More details to see:
    Installing Exchange on a domain controller is not recommended
    http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.warninginstallexchangerolesondomaincontroller(v=exchg.150).aspx
    About your issue, cannot send and receive externally, I suggest make sure the DNS can be resolved first.
    Then, check whether Outlook Anywhere has been enabled. If not, please enable it on both Exchange server and Outlook client side.
    Last, try to configure both Send Connector and Receive Connector.
    More detailed error message will be helpful for the further troubleshooting.
    Thanks

  • I have just upgraded from Lightroom 5 standalone to Lightroom 6 standalone. I ppear to have been automatically enrolled for a 30 day free trial of Lightroom mobile and Creative Cloud. Reading the FAQ, it appears that after the expiry of the free trial I w

    I have just upgraded from Lightroom 5 standalone to Lightroom 6 standalone. I appear to have been automatically enrolled for a 30 day free trial of Lightroom Mobile and Creative Cloud. Reading the FAQ, it appears that after the expiry of the free trial, if I do not sign up and pay, I will only be able to view my pictures on the desktop but not edit them - surely this cannot be true. How do I un-enroll for the 30 day free trial of Lightroom Mobile and CC?

    When I was signed into Adobe (which was a requirement for installing the upgrade), Lightroom 6 told my at the top right corner that I had 30 days left of my free trial of Lightroom Mobile and Creative Cloud. In parallel with this forum posting, I am chatting with Adobe support. he is away to find out how to prevent any synching with Creative Cloud during the 30 day free trial. I do not think that Creative Cloud is an application that gets installed on your PC. I think Lightroom 6 has it built in, and can use it if if you are signed up to the Creative Cloud and Lightroom Mobile (which I am for 30 days)

  • Stop Sending and Receiving Emails for the employee which is no longer exist

    Exchange 2007
    Hi There,
    I have lot's of mailboxes in my exchange server which their users are not with us anymore.
    I would like to stop receiving any emails for them.
     I know if I go to "Mail Flow Settings\Message Delivery Restrictions\Accept messages from\Only Senders in the Following List" and select a dummy user it works but it sends my server information to the sender. and I do not want to give the
    information.
    Any idea how to:
    Stop sending / Receiving email for these type of users?
    OR
    Changing the respond message?
    Thank you in Advance for your time

    You have a couple options.  Removing the mailbox would be the simple solution to stop mail flow, but I am assuming you need the mailbox which is why you have not taken this route.
    Alternatively, if you have a message filtering solution in place that sits in front of your Exchange environment, you may be able create a filter to block inbound messages for a specific address so the message never reaches your internal Exchange servers. 
    This would prevent any information regarding you Exchange servers being returned.
    If you do not have a filtering solution to do this, you can create a delivery status notification (DSN) so that a custom response is returned when messages are sent to a mailbox.  Refer to this article on creating a DSN:
    http://technet.microsoft.com/en-us/library/aa996803(EXCHG.80).aspx

  • I have not been able to back up for2 days.  Time machine error message: /Volumes/Data/David's MacBook Air.sparsebundle" is already in use.

    I have not been able to back up for2 days.  Time machine error message: /Volumes/Data/David’s MacBook Air.sparsebundle” is already in use.
    What now?
    Macbook Air.
    Was working fine for the past year until now.

    See more like this on the right.. this is the most common error reported here since mountain lion came out..
    Or read C12.. http://pondini.org/TM/Troubleshooting.html
    Or just restart the whole network.. in right order from off.. modem.. router / TC.. clients 2min gap.

  • Why am I getting an error stating this version of iTunes has not been correctly localized for this language. Please run the English version when I just bought a song yesterday and had no problems

    I have iTunes running on my Windows8 desktop for some while with no problems. Yesterday I purchased a song, deleted a free game app. and upgraded to the most current version of iTunes.  This morning I could not pull up iTunes, so I retored my iTunes to a setting two (2) days ago.  Now, as soon as I try to start iTunes I get a message stating: This version of iTunes has not been correctly localized for this language. Please run the Enclish version OK.  So I hit the OK button and nothing happens.  Please help.

    Hi there GloriaNM,
    You may want to try removing and reinstalling iTunes as an initial troubleshooting step. Take a look at the article below for more information.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    -Griff W.

  • I have not been receiving notifications that I have new iMessages. Please help!

    I Have not been receiving the notifications from when I get new iMessages. When I go onto my iMessage app the messages will slowly show up but they don't show up on the lock screen or the notifications

    Same here. I used to have a iPod touch 4, and it did the same thing. I got you covered.   
    READ HERE IF YOU HAVE A IPOD TOUCH 4TH GENERATION:
    A lot of of the older Apple products, such as the iPod 4, and iPhone 4s, don't work as well as the newer models. My iPod would cash over and over again, and I would receive messages about a hour after they were sent. I gave up on my iPod, and upgraded to an iPhone 5c, and works really well. The iOS 7 improved the way my iPhone worked, and I'm really happy about they things turned out. If I were you, I would upgrade to the iPod 5, or a iPhone 5c or 5s. If you dont want to upgrade, I guess you really have no other choice. Apple stopped making iPod 4s like a year ago, so I'm pretty sure that Apple won't be able to help you with it.
    READ HERE IF YOU HAVE A IPOD TOUCH 5TH GENERATION:
    Any iPod struggles to work, and I have to say, Apple could make iPods better. Download the newest version of iOS 7  on your iPod. iOS 8 will be coming out this fall, and it will be the fastest operating system Apple has ever made. If you have the newest model of iOS 7 on your iPod, and it still doesn't work, take your iPod down to Apple, and they will offer to fix it up for you, for a low price.
    Hope that helped!!!  

Maybe you are looking for

  • Text auto reply

    Is there an app that will auto reply to incoming text messages

  • Printing error and Export to PDF error after a Quark Express convert

    I are working on a catalogue that was previously made with Quark Express. I used q2id to convert over to InDesign CS3. I had some minor issues setting up the new fonts, but that was no big deal. Now that the catalogue is close to finished, I want to

  • Can't merge cells in Report Designer

    Hi! I use Report Designer. I have 3 rows and 5 columns in the Header/Footer. I can't merge cells, for example cells from 2nd row, 2-4th columns. I need this format: AAA | BBB | DDD | EEE | FFF ssss | ffffffffffffffffffffffffffffffffff | gggg aaaaa| n

  • Pull the data from database.

    Hi EveryBody,                  I have a requirement in universe if the end user will select the date from (1/8/14 to 10/8/14) then pull the data from the database. but when the end user select the data more than 10 days(e.g 1/8/14 to 15/8/14 etc...)

  • WM-SD relation

    We are implementing WM and have a problem in the relation with SD. We have a customer order, with its corresponding delivery, with two positions of the same material: one position with price and one gift position (according to the SAP standard), that