Unable to send and receive email for external domain

Hi,
I just installed Exchange Server on my 2K8 domain controller. I have set up the send connector and made necessary changes to the receive connector as well. I have updated the DNS records as well on my domain registrar. I can access OWA from outside my companies
network and is able to send and receive emails for my domain but unable to send or receive emails to any other domain. I have checked the delivery report and it says that the message has been queued on the server. 
I also did nslookup. Results mentioned below:
C:\Users\Administrator>nslookup www.google.com
Server:  localhost
Address:  ::1
Non-authoritative answer:
Name:    www.google.com
Addresses:  2404:6800:4009:802::1014
          74.125.236.145
          74.125.236.148
          74.125.236.146
          74.125.236.144
          74.125.236.147
C:\Users\Administrator>nslookup www.microsoft.com
Server:  localhost
Address:  ::1
DNS request timed out.
    timeout was 2 seconds.
DNS request timed out.
    timeout was 2 seconds.
*** Request to localhost timed-out
Any help would be much appreciated!

Hi hg01,
According to your description, I notice that you installed Exchange server on a DC.
It is not recommended to install Exchange server on a DC. I suggest install Exchange server on a member server. More details to see:
Installing Exchange on a domain controller is not recommended
http://technet.microsoft.com/en-us/library/ms.exch.setupreadiness.warninginstallexchangerolesondomaincontroller(v=exchg.150).aspx
About your issue, cannot send and receive externally, I suggest make sure the DNS can be resolved first.
Then, check whether Outlook Anywhere has been enabled. If not, please enable it on both Exchange server and Outlook client side.
Last, try to configure both Send Connector and Receive Connector.
More detailed error message will be helpful for the further troubleshooting.
Thanks

Similar Messages

  • Email delivery failed. unable to send and receive email for da device 9780 bold

    Hellow, I m using
    BlackBerry® 9780
    smartphone (3G, Wi-Fi)
    6.0 Bundle 863 (v6.0.0.285, Platform 6.5.0.54)
    3G Bands 1,2,5,6
    Cryptographic Kernel v3.8.6.5
    Branding Version: 1.0.99.538J
    Micro Edition Configuration: CLDC-1.1
    Micro Edition Profile: MIDP-2.1
    Micro Edition JTWI Version: 1.0
    Micro Edition Media Version: 1.1
    Micro Edition PIM Version: 1.0
    Micro Edition File Version: 1.0
    Micro Edition Bluetooth Version: 1.1
    Micro Edition Location Version: 1.0.1
    Micro Edition Security and Trust Services (APDU) Version: 1.0
    WLAN Version: 4.2.1.40
    www.blackberry.com
    Now the problem is I have my email {REMOVED} associated with this device. But I m unable to send receive the email
    There is an error I get like delivery faliure please resolve meh and assist me
    Mod Edit: Removed personal information to comply with Community Guidelines and Terms and Conditions of Use.

    Hi and Welcome to the Community!
    divyaan wrote:
    There is an error I get like delivery faliure please resolve meh and assist me
    Sadly, from "like", we can't really understand the error message you are receiving...exact and complete content of any errors presented are always better to help us understand rather than vague hints and such.
    In any event, I recommend this. With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive to your Messages app
    2) Delete and Resend Service Books (pre-BB10 devices only)
    KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
    If you have no CMIME entry, then skip the deletion
    KB02830 Send the service books for the BlackBerry Internet Service
    Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
    3) Reboot
    With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your configurations for the affected email accounts. Otherwise, you should contact your mobile service provider for formal support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I'm unable to send and receive email through Apple Mail 4.  I've checked my settings on Preferences, and my password to Gmail is up to date for syncing with IMAP, but it still won't connect.  Suggestions?

    I'm unable to send and receive email through Apple Mail 4.  I've checked my settings on Preferences, and my password to Gmail is up to date for syncing with IMAP, but it still won't connect.  Suggestions?

    I think it's trying to open it in a gMail eMail & is losing your gMail password that it needs log into gMail, but not 100% positive.
    Have you tried Right clicking or Control+click on the eMail link & choose Copy? Works on some, not others.

  • I need send and receive emails for edge server 2010

    i have exchnage 2010 in our orgnization now working fine , i can send and receive emails for hub and also we have tmg and fortigate firewall(200B) , already install and configuration edge server(configure edge subscribtion file and edge sync) but still message
    sent form hub and also receive form hub , what to do to receive from edge ? please help me i have 3 month search to fix his problem.

    Hello,
    I recommend you use the Test-EdgeSynchronization cmdlet to check if the subscribed Edge Transport servers have a current and accurate synchronization status. If you have configured EdgeSynchronization successfully, please delete send connector
    on Hub transport server.
    Please uncheck "anonymous users" on receive connector for Hub server.
    Please follow the ExchangeITPro's suggestion to check DNS MX record.
    Cara Chen
    TechNet Community Support

  • Send and receive emails for iMessage and FaceTime

    Hi everyone! I'm in a tough situation. On iMessage and FaceTime, I want to use a different send and receive email but it says next to the one I type in
    Error: unable to verify email because it is already in use..... And it still has a check next to the email I don't want. Can someone plz reply
    Soon!! HELP      

    iOS: FaceTime is 'Unable to verify email because it is in use'

  • Stop Sending and Receiving Emails for the employee which is no longer exist

    Exchange 2007
    Hi There,
    I have lot's of mailboxes in my exchange server which their users are not with us anymore.
    I would like to stop receiving any emails for them.
     I know if I go to "Mail Flow Settings\Message Delivery Restrictions\Accept messages from\Only Senders in the Following List" and select a dummy user it works but it sends my server information to the sender. and I do not want to give the
    information.
    Any idea how to:
    Stop sending / Receiving email for these type of users?
    OR
    Changing the respond message?
    Thank you in Advance for your time

    You have a couple options.  Removing the mailbox would be the simple solution to stop mail flow, but I am assuming you need the mailbox which is why you have not taken this route.
    Alternatively, if you have a message filtering solution in place that sits in front of your Exchange environment, you may be able create a filter to block inbound messages for a specific address so the message never reaches your internal Exchange servers. 
    This would prevent any information regarding you Exchange servers being returned.
    If you do not have a filtering solution to do this, you can create a delivery status notification (DSN) so that a custom response is returned when messages are sent to a mailbox.  Refer to this article on creating a DSN:
    http://technet.microsoft.com/en-us/library/aa996803(EXCHG.80).aspx

  • TS3276 I have recently been unable to send and receive emails

    When I attempt to send an email, I am prompted to enter my password.  When I do, the password is rejected.  I'm also unable to receive emails.  I've tried switching to different ports, but it didn't work.  I also tried changing my password, but this was also unsuccessful.  These problems just started.  Any help would be appreciated.

    I currently have a teacher in district as well who has this same issue on a MBP. New emails will not come to the Mail account on the MacBook.  If she logs onto an iMac in the classroom, Mail opens and operates without issue. We have removed and added her Exchange account on the MBP in the Mail program and still have the same issue.

  • HT1695 unable to send  and receive emails

    Hi 
    After recently changing my ISP password,       I then updated these to include  my PC, Laptop, iPhone 3GS, and my iPad (3rd Generation) all worked perfectly f except for my iPad 
    I have double checked my password over and over again so I am sure this is correct
    the following error message appears:
    Cannot send Mail
    The user name or password for"incorrect" SMTP:**********@[email protected] is incorrect      / settings/ok
    I am receiving a Wi Fi signal without any problem
    Help please

    Hi Templeton (again)
    I'm afraid I jumped the gun
    When I re-entered the details I received all the ticks and I assumed that everything would be ok but I'm afraid not I cannot send
    Regards
    Albert

  • Unable to send and receive emails

    Have two accounts, one for a Hotmail email address and one mac address.  Can receive my hotmail emails only.

    Hello,
    If you go to dock go to you're mail app. And follow these steps:
    - Click mail
    - Preferences
    - Accounts
    Click on + and put there your mac adress ([email protected]) with iCloud.
    I hope this was helpfull.
    Kind regards,
    Jay Asistio

  • Unable to send or receive email this morning

    Hello,
    I'm not able to send or recieve emails from Verizon this moring using Windows Live Mail.  I've rebooted my PC but still problem pesists.  Below is the message I receive.  Is there an issue with Verizon mail this morning?
    Thank you for your assistance.
    Unable to send or receive messages for the Verizon (xxxxxxxxx) account. The connection to the server has failed.
    Server: 'incoming.verizon.net'
    Windows Live Mail Error ID: 0x800CCC0E
    Protocol: POP3
    Port: 110
    Secure(SSL): No
    Socket Error: 10060

    Can receive mail, cannot send.
    Client: Thunderbird
    Last successful outgoing message 5PM 5/20. First failed outgoing 9PM 5/20. Symptom was NB connect error 1460.
    Discovered outgoing server was set to outgoing.verizon.net, port 587, password sent insecurely (honestly don't know how it got there, since last outage Feb 2014).
    Changed outbound server to smtp.verizon.net, SSL/TLS, port 465, per Verizon instructions at http://www.verizon.com/support/residential/internet/fiosinternet/email/setup+and+use/questionsone/86...
    Still no luck. BTW I can ping outgoing.verizon.net, but smtp.verizon.net appears DEAD ("request timed out").

  • Unable to send or receive email

    We purchased an iPad with Retina display in Nov 2012, since we bought it, we have had issues with email. We are now unable to send or receive email from Microsoft Exchange server on the ipad. The email locks up when trying to open or send. It has gotten progressively worse. At first couldn't open more than 8 different emails before it locked up, now we can't send or receive any emails. Please help!

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • Unable to send or receive messages for the Btinter...

    Hello
    I use Windows Live Mail to download my emails. This is working fine on two computers for other BT Internet and Gmail accounts. But one of my main BT accounts consistently receives the following messages on both computers:
    Unable to send or receive messages for the Btinternet (xxx) account. 
    Server Error: 0x800CCC90
    Server Response: -ERR inactivity timeout
    Server: 'mail.btinternet.com'
    Windows Live Mail Error ID: 0x800420CD
    Protocol: POP3
    Port: 110
    Secure(SSL): No
    Unable to send or receive messages for the Btinternet (xxx) account. Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems or a long period of inactivity.
    Server: 'mail.btinternet.com'
    Windows Live Mail Error ID: 0x800CCC0F
    Protocol: POP3
    Port: 110
    Secure(SSL): No
    The messages for this account are available via webmail, and sending an email works. 
    I've tried BT Desktop Help, but this simply sends me in the direction of standard advice pages. I have no reason to think the settings are wrong. 
    Could anyone suggest what is going on here please?

    LesHarg wrote:
    Hello
    I use Windows Live Mail to download my emails. This is working fine on two computers for other BT Internet and Gmail accounts. But one of my main BT accounts consistently receives the following messages on both computers:
    Unable to send or receive messages for the Btinternet (xxx) account. 
    Server Error: 0x800CCC90
    Server Response: -ERR inactivity timeout
    Server: 'mail.btinternet.com'
    Windows Live Mail Error ID: 0x800420CD
    Protocol: POP3
    Port: 110
    Secure(SSL): No
    Unable to send or receive messages for the Btinternet (xxx) account. Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems or a long period of inactivity.
    Server: 'mail.btinternet.com'
    Windows Live Mail Error ID: 0x800CCC0F
    Protocol: POP3
    Port: 110
    Secure(SSL): No
    The messages for this account are available via webmail, and sending an email works. 
    I've tried BT Desktop Help, but this simply sends me in the direction of standard advice pages. I have no reason to think the settings are wrong. 
    Could anyone suggest what is going on here please?
    Hi. Welcome to the forums.
    For starters, the recommendation by many people is to uninstall BT Desktop help.
    If this has always been the case, rather than a sporadic issue, then it could be an account problem that seems to plague some accounts - and has done for years. Hopefully the changeover from Yahoo! to Critical Path will cure this particular issue. Try the other settings mentioned by Keith.
    Even though some accounts are fine, there is still a possibility that your local security software can interfere. For example if you have email scanning turned on - then this can be turned off to see if that helps.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • Unable to send or receive emails on my blackberry curve 9320

    Hi, for the last 2 days i have unable to send or receive emails on my phone, i have contacted vodafone and they have not been able to help. I would also like to add that when i click on OPTIONS  - SECURITY - SECURITY STATUS INFORMATION my 4 email accounts show up, could this be the problem, please help if you have a soloution.
    Kind Regards
    Solved!
    Go to Solution.

    Hi and Welcome to the Community!
    With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive to your Messages app
    2) Delete and Resend Service Books
    KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
    If you have no CMIME entry, then skip the deletion
    KB02830 Send the service books for the BlackBerry Internet Service
    Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
    3) Reboot
    With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your configurations for the affected email accounts. Otherwise, you should contact your mobile service provider for formal support...consider that you pay them for your services and formal support, and right now they seem to not be delivering either to you. They even have the power to escalate your case formally up to BlackBerry if they cannot resolve it, but you need to not allow them to fob you off with things like "it looks good on our end"...they are responsible for delivering services to you, you pay them for that.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How do I send and receive email with my @me email account

    I want to drop yahoo as my email provider, so how do I send and receive email using my @me account.  Using yahoo, you go to yahoo, then mail and your good to go. I'm not a tech expert and fairly new to apple products and would like the improved security of an apple address.

    Hi stephraerae,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iOS: Adding an email account
    http://support.apple.com/kb/ht4810
    iCloud is one of the options you can choose for your email provider.
    iCloud: Set up iCloud Mail on your devices
    http://support.apple.com/kb/PH2621
    This article includes the specific iCloud server settings:
    iCloud: Mail server information
    http://support.apple.com/kb/HT4864
    Hope that helps ...
    - Judy

  • Exchange 2007 - User's mailbox disappeared in EMC but they can still send and receive email

    We have a user that was complaining about not being in the address book anymore.  After I did a little rooting around in management console I noticed that their mailbox was no longer listed under Recipient Configuration -> Mailbox, but what's weirder
    is I can do a search and find her listed in the results - at which point I can right-click her name and do everything I normally can with no problem. Listing all of the mailboxes with PS shows her still there too.  As far as I know, she is the only user
    having this problem.
    She can send and receive email just fine, but like I said, she is no longer in the global address list so other users have trouble sending her stuff.  At her computer, I tried repairing her email (under account settings) but the process would fail when
    searching for her settings.  I don't know if this is a stupid thing to add, but I did run Clean-MailboxDatabase on our first storage group to see if her mailbox had been deleted or disconnected or whatnot but nothing is currently showing up in Recipient
    Configuration -> Disconnected Mailbox.
    Some info on our setup:
    Exchange 2007 on Windows Server 2003r2
    AD is on Windows Server 2008r2
    Her computer is running Outlook 2010
    I did restart our Exchange server 2 days ago to update VMWare tools, but no Windows updates were installed.  She couldn't tell me exactly when this problem started, but it was more-than-likely in the last couple of days as she was recently married and
    I had to change her name in AD and Exchange - so everything was confirmed 100% functioning 2-3 weeks ago.
    I'm at a lost for what the issue could be, but then again Exchange isn't exactly my forte, so any help would be much appreciated.

    First things first - is her mailbox hidden from address lists?  Run
    Get-Mailbox <alias> | Fl HiddenFromAddressListsEnabled to find out.  It probably isn't, but we need to clear this, just in case.
    Now, assuming it is not hidden, have you searched for both her maiden and married names in your directory?  Often, when the name on a mailbox is changed, the display name is not - and vice versa.  Also, has her email address also changed? 
    If so, has a secondary proxy address been added to reflect her maiden name?  I'd do this, just to be sure things aren't lost that should be delivered to her.
    I can't think of anything else obvious right now.  After you've checked these things, get back to us with their results.

Maybe you are looking for