Not Connecting to Wired Network and Forcing the loss of all Connections on the Home Network

Just got a new G550 laptop  w/Win 7 OS. Tried to connect to wired router and got message "network cable not connected". Recycled laptop and router and came up with router connected to the laptop. Same message after search and identify steps finished. I then noticed I lost connection to the net/router with my other home networked units as well! Tried another cable, same results along with losing the entire home network connection. Disconnected the G550 from home network, via the cable, and the home network reconnected without any intervention. Tried another reboot directly connected to the cable modem, no go there either!
  I also rebooted with the wireless search shutoff and got the same problems as on the wired attempt. Thought it might have been the NIC card so I exchanged the system back at the store.  Sorry, same problem!! 

I have a very similar problem... New Lenovo G550, running Vista Home Premium 64-bit. Right from the start it causes my TrendNet TEW-432BRP router to crash every 10 seconds. I bought a new DLink WBR-1310 and experience the same problem. Connecting to either router through either a wireless connection or a LAN cable connection causes the router to crash every 10 seconds. The router crashes, reboots, establishes a connection with the laptop, communication starts and then the router crashes again.
I am looking for help.

Similar Messages

  • Just recently updated an iPhone 4 to iOS 7. Having trouble activating iMessage. It will not connect to network. Any help ?? All connections are fine other apple devices are working

    Just recently updated an iPhone 4 to iOS 7. Having trouble activating iMessage. It will not connect to network. Any help ?? All connections are fine other apple devices are working

    Hey X300X,
    Thanks for the question. I understand you are experiencing issues with iMessages. The following article may help to resolve your issue:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    You may also want to reset your network settings:
    Settings > General > Reset > Reset Network Settings.
    Note: this will delete any network related settings (saved Wi-Fi passwords, etc), it will not erase any content from your device.
    Thanks,
    Matt M.

  • Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603

    Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603 & 1611 appeared! please help me!!

    You may have a faulty USB cable. Try another.
    Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the iPhone.
    If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Select the device in iTunes and choose "restore from backup".
    If you still can't get it to work, you have done all you can and only Apple will be able to help.

  • Download iOS 8 once and use it to upgrade all iPads in the network

    Is it possible to download iOS8 only once and use it to upgrade all iPads in the same LAN? 
    I tried the following methods and they are just not working:
    1. Connect an iPads Mini with Retina Display to the iTunes on Mac.  I chose Download Only. Once downloaded the iPad Software Upgrade, I upgraded the connected iPad to iOS8.  Then I connect another iPad (used to be on another Mac) to the same iTunes.  I had to download iOS 8 again.  It's not using the same downloaded iOS 8 file.
    2. I turned on the Caching Service (not Software Upgrade Service, i.e. for Mac Software) on the Mac Mini Server from the Server app.  I then repeat step 1 above and got the same result.  It seems that the Caching Service does not cache the iOS 8  Software Upgrade like what it does for other apps.  (I think I may need to use some Apple Scripts but I have no such experience.)

    Ivan H wrote:
    It's for the family.  Every member has 2-3 iOS devices to upgrade.
    I agree with Csound on that, a family, even with a lot of devices will have to individually update.  There are enough nuances in the iOS for different devices that you need to download for each.  If you had 200 iPad 2's then there might be an enterprise way...but not a family with a mix of devices.

  • IPad constantly reboots every 2-3 minutes, after full recovery is not activated to  wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more

    IPad constantly reboots every 2-3 minutes, after full recovery is not activated to  wi-fi, and Itunes - for 20 days, Itunes says that the activation was not possible because the server is not available try again later. Ipad under warranty, but he was more than 6 months, so please call customer service apple can not. by DFU also restored Official Ipad bought in a store in Russia. When buying activated immediately.  IMEI 013311005943507. Help please! the official service Moscow  representation FDA ipad offer to send in the U.S. for $ 500!

    Hello this is happening to us also (minus the Bluetooth speaker).  We can't figure out what is causing the data usage.  I turned off mobile data as soon s I activated the device, and got the message that unless I am connected to WiFi.....(that is exactly what I wanted). We watched Netflix for about three hours, then the alerts started.  Like you we have many devices connected and never used over 2GB now all of a sudden we have used it in a matter of hours.  My husband called Verizon  and got the usual doubting Thomas response.  I understand that they don't know my device settings.  So over the phone we check all the settings and turned  off every possible culprit eating up the data and end the call.  By now I have purchased another gig for the month!  Assured we are NOT using mobile data, we continue on the IE path to bliss.  HA!  A few hours later I check the mobile data usage on the Verizon website and that darn thing is still using data.  After two more phone calls and two VERY uneventful trips to the local store we were told to take out the sim card.  This has stopped the data usage, but it defeats the purpose of having the data plan.  I could have just stuck with my Surface.  Verizon sent us a new sim card.  Its been installed and I have set my homepage to Verizon mobile data usage (just kidding) but I am on that site a lot.   I am surprised at the number of complaints about this device.  When we called the Verizon support acted as though this was the first time they had heard about this.   Loved your post, you should write for a living.

  • When trying to install apps from app store it does not prompt an apple id and after 15 minutes says "cannot connect to itunes store"

    When trying to install apps from app store it does not prompt an apple id and after 15 minutes says "cannot connect to itunes store".

    Your Apple ID may be greyed out because of restrictions. Settings>General>Restrictions>Allowed Changes>Accounts. If you set that restriction, your ID will be greyed out. Nobody can make changes to the account without entering the passcode to change disable the restriction.
    Maybe something in here will help, even though this is not exactly what you are experiencing.
    Can't connect to the iTunes Store - Support - Apple
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/

  • I am trying to connect to apple support and it keeps asking me to put in the SN of my MAC and when i do it says that the SN is invalid I am putting in the SN from under about this mac and it is the same as the one one the bottom of the MAC any ideas ?

    I am trying to connect to apple support and it keeps asking me to put in the SN of my MAC and when i do it says that the SN is invalid I am putting in the SN from about this mac and it is the same as the one on the bottom of the MAC any ideas ?

    Did you purchase this product direct from Apple online, in an Apple Store, or through a third-party authorized reseller? Or did you buy it from an original owner whose Applecare plan was supposed to be transitioned to a new owner, by them?
    Do you have an original shipping carton the unit arrived in?
    If the product was a retail 'open carton' purchase and no
    back-track is possible, contact the reseller.
    And if the computer had seen a major service with logic
    board replaced, etc, it may have other issues with serial
    number vs one they may have assigned it. Usually a
    new logic board may have the SN flashed or if a unit
    was determined to be a reman, a new # assigned. But
    that would appear in System Profiler, if officially reman.
    If you registered a product anywhere with Apple, it would show on a web page along with its serial numbers, going back several years, at this page after you log in there.
    https://getsupport.apple.com/GetproductgroupList.action
    A blue text with triangle See all products and services opens an Apple ID
    sign-in window, then the page changes to show your items & info about them.
    If you run the serial number through online Lookup, what appears?
    http://www.powerbookmedic.com/identify-mac-serial.php
    Not sure if this helps, 'your product' should appear - if registered.
    Good luck & happy computing!

  • Iphone 4s was unable to detect any wifi networks and was told to pay £159 to get the entire phone replaced, should i do it?

    My iphone 4s does not detect any wifi networks but the apple genius said that the wifi signal seems to be fine but it just is not detecting any wifi networks and because I cannot find my receipt for the phone and the apple store only dates back purchases up to 18months ago, is there a way i can obtain my receipt?

    If your warranty is up, the replaced iPhone will have a 90 day warranty.
    Out-of-Warranty Service
    If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service Fee listed below.
    Please note Out-of-Warranty Repair Service fees from your carrier may be different than those listed below.
    iPhone Model
    Out-of-Warranty Service
    iPhone 5s, iPhone 5c,
    iPhone 5
    £ 216.44
    iPhone 4s
    £ 166.44
    iPhone 4, iPhone 3GS,
    iPhone 3G
    £ 126.44
    The Out-of-Warranty Service Fee includes a £ 7.44 shipping fee, which applies only if service is arranged through Apple and requires shipping. All fees are in British pound sterling and include VAT. iPhone Out-of-Warranty Service may also be available from your wireless carrier. Pricing may vary.
    When setting up out-of-warranty service, Apple will request credit card pre-authorisation for the maximum service fee listed above. This amount will be deducted from your credit limit. The final service fee we charge will be determined during testing and may be less than the service fee listed above.
    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
    Apple reserves the right to determine whether or not your iPhone is eligible for Out-of-Warranty service. iPhones that are repaired or replaced have a 90-day limited hardware warranty or assume the remainder of your standard warranty or AppleCare product coverage, whichever is longer. Please see Apple's Repair Terms And Conditions for further details.

  • I have an old ipod touch and it keeps saying, ipod is disabled. I connected it to itunes and it said, sorry you need to put the passcode in, but it wont let me. And my power button doesnt work.

    I have an old ipod touch and it keeps saying, ipod is disabled. I connected it to itunes and it said, sorry you need to put the passcode in, but it wont let me. And my power button doesnt work.

    iOS: Unable to update or restore

  • I don't have very much space left on my iCloud backup. I had a previous iPhone, my current iPhone and my iPad that are all connected to one cloud. Can I delete the backup from my previous iPhone? Will it delete in the cloud AND on the phone?

    I had a previous iPhone, my current iPhone and my iPad that are all connected to one cloud. Can I delete the backup from my previous iPhone? Will it delete in the cloud AND on the phone? or does it just delete from iCloud? or does it just delete from the phone? Someone please help!

    You can delete the backup without any problem. Only the backup will be deleted from iCloud and nothing else will be deleted, so you can do it without worrying about losing data on iCloud or your devices

  • After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

    After updating my iphone 5s to ios 8.0.2, I am not able to use watsapp and line properly, iphone automatically comes out of the apps after few mins. Please suggest how to fix it.

    I had this same problem with what's app.  There is a new update for the app on the app store which is compatible with ios8.  Update the app, or delete it and re-add it.  I found a lot of apps weren't compliant with ios8, but after updating everything worked fine.

  • I recently installed the trial version of Adobe XI and the trial period ended, so I wanted to revert back to the version I already had. I did not see any uninstall feature and my old version was apparently replaced by the trial version. I cannot re-instal

    I recently installed the trial version of Adobe XI and the trial period ended, so I wanted to revert back to the version I already had. I did not see any uninstall feature and my old version was apparently replaced by the trial version. I cannot re-install a previous version b/c I need both a product Id (GOd only knows where that is now) and a way to uninstall the trial. Any ideas?

    When you installed the trial, there should have been an option to have ignored your current installation and leave it. Apparently you skipped that case. To uninstall the trial (in Windows) go to Control Panel>Programs & Features and select the Acrobat XI and choose uninstall. After the uninstall run http://labs.adobe.com/downloads/acrobatcleaner.html to clean up your system. HOWEVER, if you see your old Acrobat in that window, do not run the cleaner, but do a repair on the old version.
    You did not mention the old version you had. You might try from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html. As for the S/N, you should have register and if so you can get it from Adobe. The instructions are at http://helpx.adobe.com/x-productkb/global/find-serial-number.html#adobeproductdownload.
    Be sure to backup any download of the old installer and the S/N to CD or backup HD for future use. They will not likely continue to be available.

  • Firefox v15 and up cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15-30 seconds and forces me to turn it off with the power button

    Firefox v15 and up cause my computer (MAC OSX 10.8.2) to freeze for about 30 seconds every 15-30 seconds and forces me to turn it off with the power button. It only causes this after I have opened Firefox, my computer runs fine before opening Firefox. I have uninstalled Firefox and cleared my personal settings. I have installed future updates (16 and 17) and have run into the same issue. I cannot pull any information on RAM or CPU usage because when it happens it makes my computer unusable. Unfortunately I need to use FF for work and can't. I have tried the different responses on the forums to reduce the amount of RAM and CPU usage with no change in performance.

    Duplicate of https://support.mozilla.org/en-US/questions/944207

  • Fire fox is not loading face book, the page is all off to the left and it just keeps trying to load, and there are no pictures

    i have be trying to load facebook all day, but it just tries to load and the writing is all off to the left, and keeps trying to load. the face book login page is magnified and all wonky. i thought it may be a task bar , so i had the Zynga tool bar removed, but the problem still exist...
    no other website is a problem

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • TS4036 Trying to restore, I've tried a dozen networks and I keep getting a "lost connection" after an hour or two, EVERYTIME. Using Cox Wi-fi with a net gear 300 router. Any suggestions?

    Trying to restore, I've tried a dozen networks and I keep getting a "lost connection" after an hour or two, EVERYTIME. Using Cox Wi-fi with a netgear 300 router. Any suggestions?

    Thanks, helped me figure out a bigger problem there was with my router's access control and all kinds of crazy numbers that needed to be changed, but I got it.
    Problem is fixed as far as I can tell!

Maybe you are looking for

  • HT3775 how can i get my videos to play on quicktime or itunes when it says it needs the necessary codecs?

    i tried downloading my movies from my Sony HandyCam DCR-SX41 to my MAC OS X 10.7.4 and the message was that quicktime did not have the necessary codecs to open the movies... what do i do about this?? thank you.

  • Transformation provider for AD in OIM 11g R1

    Hi, I have to write a transformation provider for reading AD object id from Ad and storing it in OIM. AD object id is in some byte form in AD, I have to write a transformation provider to convert it in String format. In this I am unable to find Jar c

  • Hp p7-1257c dvi to vga

    My computer has 2 -Dvi monitor ports and I need to hook up a Vga monitor. When I have it plugged into the Dvi monitor it works but if I use a Dvi to Vga adapter it will not work. I have tried 2 differnt adapters but it still doensnt work. Is somethin

  • Windows Media Player for mac

    I just downloaded it and it has an icon on my desktop that says Windows Media.sitx. When I click on it it says : There is no default application specified to open the document windows media.sitx

  • Biztalk Salesforce Integration

    Hi,  can you help me to get the data from saleforce to Biztalk with out using Windows Azure. I got the code snippet from MSDN to fetch the data when workflow action is triggered in Salesforce oubound message is sent to Biztalk, but using windows azur