TS4036 Trying to restore, I've tried a dozen networks and I keep getting a "lost connection" after an hour or two, EVERYTIME. Using Cox Wi-fi with a net gear 300 router. Any suggestions?
Trying to restore, I've tried a dozen networks and I keep getting a "lost connection" after an hour or two, EVERYTIME. Using Cox Wi-fi with a netgear 300 router. Any suggestions?
Thanks, helped me figure out a bigger problem there was with my router's access control and all kinds of crazy numbers that needed to be changed, but I got it.
Problem is fixed as far as I can tell!
Similar Messages
-
I've been trying to fix my sister in law's ipad mini. When I plug the ipad mini into itunes it say's it needs to restore factory settings. When I do that, it tries to do it, but then says it can't because of an unknown error 2001. I've tried it over and over, unplugged it and plugged it back in, tried to restore numerous times and the same thing keeps coming up. It won't turn on and the screen just shows that I need to plug it into itunes.
Any help would be greatly appreciatedSee
Check your USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
To narrow down the issue, you can also change up your hardware:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
If necessary, resolve any further issues with the USB connection, then with your security software.
If you're still seeing the error message, check for hardware issues by following the next section.
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes
international calling numbers..
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes. -
Trying to watch a video on quick time player and i keep getting this message You may need to install additional software to open this type of file. what do i need to install and how
I believe there is a technique which uses some similar suggestion to unwittingly tempt the user into installing malware, in order to be able to watch some (usually sexually explicit) video, so be aware of this ruse.
The only things I would download would be Perian that extends Quicktime, available here,
http://www.perian.org/
and if that did not do it, then try VLC to use instead of Quicktime. -
Im trying to convert a PDF into an excel document and I keep getting an error message that reads "An error has occurred while trying to access the service". WHat am I doing wrong?
it seems my subscription had expired so I signed up again.. It was still having trouble so I repeated the sign up process again.. Then it worked perfectly.. Unfortunately, I think I just subscribed twice and need to cancel one of them. Ugh. Such a pain when I'm trying to get this project completed. I'll be canceling at least one of the subscriptions in the morning. Adobe is not my favorite company right now. None of this was intuitive. And trying to get help was an absolute waste of an hour.
Regards,
Nathaniel
[removed by moderator] -
Trying to redownload but keep getting a "lost connection error"
In the past, I had some problems with my laptop so I recently re-installed Windows 7 yesterday. I got everything running fine. But today, I am having problems with flash player. Youtube videos don't play correctly and some websites don't display like they are supposed to. So, I tried redownloading adobe flash player, but I keep getting this "Lost connection" error. What is the problem and how do I fix it? I'm using FireFox, btw. It seems to work on Google Chrome but I like using FireFox better.
Try using these installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers) -
the iPad is totally new to me. I can't seem to do anything with my Apple ID. As the title says, I am trying to download the Facebook app to my new iPad and I keep getting an error. It tells me to sign in using my existing Apple ID, which I enter, then when I put in the password I get ConnectionManager::invoke::Failed to find service connection url. Cancel or Retry. I have no idea what I'm doing wrong. Any help would be greatly appreciated.
I'd also love to know how to get rid of the old owner's name, which was Mike - I'm AnnWow, I found a solution in another thread:
I had exact same error.....
Rebooting - Failed
Logging in to iTunes - Failed
Logging into itunes Store - Failed
Logging into iTunes Genius - SUCCESS I woulnd't have thought it would make a difference but it does Then just log into the 'other' services with iTunes.
Good luck!
I still need to know how to change the name to Ann, though, Mike keeps popping up - and yes, I have changed it under Settings..... -
I was trying to update my iTunes to 11.1.3 and I keep getting an error message
I was trying to update my iTunes to 11.1.3 and I keep getting the error message "iTunes has an invalid signature. The download has been removed or stopped". Thanks
Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/ -
i am trying to download itunes to my win32 vista os and i keep getting an error message that it is not a win32 application
In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application" -
What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?
Can you give more details? What exactly is the entire error message text? there should be an error number too. Are you trying to finalize this to an external disk?
-
I have a black Apple TV that has recently stopped working. It loads the Apple Logo on screen then goes off and starts again. It's as if it is stuck in a loop. I've tried a re-boot and this has failed. I have tried a restore using a USB cable on 5 different computers, including a Mac Book Pro and it downloads the update file but when it tries to restore I get the error code 9 showing on screen. I just can't get it to do anything.
Can anyone please help?Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?! -
I'm trying to make a purchase, but it tells me my Apple ID has been disabled, it will not let me create a new one-just a new password. Any suggestions????
This is asked and answerd many, many times every day - including several times this morning.
The forum search bar is on the right side of this page.
If changing your password does not solve, then contact itunes support. -
What am I doing wrong?
I'm trying to use AirPort Untility to configure the old APExtreme to extend the network, but it won't let me.
"Extend" is only used if the two AirPort Extremes are connecting using wireless only.
"Create" is the correct setting to use since the AirPort Exremes are connecting using Ethernet.
Configure the second AirPort Extreme to create a wireless network using the exact same wireless network name, same security setttings and same wireless password as the "main" AirPort Extreme and make sure that you are choosing the Bridge Mode option for the second AirPort Extreme before clicking Update to save the settings.
When you do this, everything will act like one big wireless network and computers will automatically pick up a signal from the AirPort with the strongest signal based on their location.
This Apple document more details on this....which is called a Roaming Network.
Roaming network -
I am trying to update itunes to 11.1.1.11 and keep getting message at the end ' error writing to file :c:\Config.Msi\301ded48.rbf.Verify that you have access to that directory'. What does this mean and how do I fix it?
I had this exact same problem just now, trying to upgrade to 10.7.
I even got that error msg when trying to UNINSTALL iTunes!
After hours of frustration trying everyone's different suggestions, I downloaded Revo Uninstaller http://www.cnet.com.au/apps/revo-uninstaller-10610875/ which solved the problem.
Use it to help uninstall iTunes and related software components in the following order and then restart your computer:
1. iTunes
2. QuickTime
3. Apple Software Update
4. Apple Mobile Device Support
5. Bonjour
6. Apple Application Support (iTunes 9 or later)
Then you can install iTunes from scratch.
Good luck -
I have a ipod touch that my son forgot what the passcode is so i went to itunes to restore it and it goes half way through the restore process then itunes doest recognize the ipod the my ipod says ipod is disabled connect to itunes but itunes brins up the message enter passcode does anyone know what to do or how to get this to work
Follow these instructions to resolve a forgotten passcode:
http://support.apple.com/kb/HT1212 -
I have several thousand mp3 files I'd like to convert to AAC, to allow Itunes Match to have a better chance at actually getting a pozitive match.
Howver, after doing maybe 30 or so files I get an error - Error occured converting the file "<track Name>". An unknown error occurred (-50).
Any ideas anyone?
Itunes 10.6.3 (25) 64 Bit
OSX 10.8 (12A269)
Model Name: iMac
Model Identifier: iMac12,2
Processor Name: Intel Core i5
Processor Speed: 3.1 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Boot ROM Version: IM121.0047.B1F
SMC Version (system): 1.72f5Doing a quick Google search with this search criterea "iTunes An unknown error occurred (-50)" found several types of situations for that error code. I suggest you use the same search critera in a search and see if anything applies.
An Apple article found Here has to do with downloading music from iTunes. I assume that does not apply to you, but may be worth looking at.
Maybe you are looking for
-
Error message on what seems to be a 'black screen of death"?
I turned on my Mac Mini yesterday and got this error message on one line of text on an otherwise empty black screen "June 29 XX:XX:XX launchd can't exec/bin/sh for single user no such file or directory" (the XX's likely to indicate exact time of boot
-
hello everyone, Im currently working on a dvd project and i was wondering...i need to do a layout for the main menu where Planets are the buttons to different menus. but instead of havin the menu static..when u switch buttons the planets rotate to th
-
Function module In Update Task is called more than once
Hi experts!! I had a requirement to Create a Customer ( i will call it B) when another Customer (A) is created (ON SAVE). I used a Badi to implement the requirement, and inside my Badi i have 2 Function Calls in Update Task. The first one to create
-
This is my jsf(jsp) page: <%@ page language="java" contentType="text/html; charset=ISO-8859-1" pageEncoding="ISO-8859-1"%> <%@ taglib prefix="f" uri="http://java.sun.com/jsf/core"%> <%@ taglib prefix="h" uri="http://java.sun.com/jsf/html"%> <!DOCTY
-
How to encode a string to base64 in java ?
Hi, I want to send my user name to my SMTP server encoded in base64 . How do I do this ?? Ramesh