Not enough amount of characters in field

In our company we have decided to use the field "Reference" in forms "Outgoing Payments" &
"Incoming Payments" (there are fields OVPM.CounterRef & ORCT.CouterRef) like the field "Customer
Ref. No." in forms "A/R Invoice" & "A/P Invoice".
These fieldsare appropriate for filling number of contract because fields "Reference" and "Customer
Ref. No." both copies into the field "Ref. 2" of "Jurnal entry" when documents are posted.
The fields have characters limit:
"Customer Ref. No." in form "A/P Invoice" - 100 characters
"Customer Ref. No." in form "A/R Invoice" - 100 characters
"Ref. 2" in form "Jurnal entry" - 100 characters
"Reference" in form "Outgoing Payments" - 8 characters!
"Reference" in form "Incoming Payments" - 8 characters!
We would like to have an ability to put into fields "Reference" in forms "Outgoing Payments" &
"Incoming Payments" 100 characters too.

hi,
Work arounds:
Create user defined fields in outgoing/incoming payments and apply formatted search in journal entry Ref2 field to populate data in it.
or
Extract data from user defined fields of outgoing/incoming payments(using query) and update journal entry using DTW.
Jeyakanthan

Similar Messages

Limit the amount of characters of a text field based on first digit

Hello and thanks in advance for your help!
I would like to limit the amount of characters of the text field based on the first digit of the number (the text field is only limited to a number format...no decimals, no commas).
For example, if the number begins with a 3, I would like to limit the text field to allow only ten characters. I have three scenarios but if I could get started with some code and what is the best place to add it (keystroke or validation?) I can take it from there. Thanks again for your help!!

I've written this code for you that does that. Use it as the field's custom Keystroke code:
// Validate that only digits are entered
if (event.change) {
    event.rc = /^\d+$/.test(event.change);
// Validate string length if it starts with 3
if (/^3/.test(AFMergeChange(event))) {
    event.rc = AFMergeChange(event).length <= 10;
    if (!event.rc) app.alert("If the number starts with \"3\" it may not be longer than 10 digits.",1); // optional error message
You can duplicate the second part of it for additional conditions, but keep in mind that this code won't even let you remove the first character in the field if the result is an invalid one.
For example, if you enter "234567890123456" then you can't remove the "2" at the start because that would result in an invalid number. You can remove any of the other digits, though, and when it's 10 digits or less then you could remove the starting "2" as well.

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

Oracle can not support upto 32 characters table name and field name ?

hi
oracle up limitation ?
create table aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa(a char);
Error
ORA-00972:identifier too long
or
create table a (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa char);
Error
ORA-00972:identifier too long
Oracle can not support upto 32 characters table name and field name ?
It is true?
null

Hello All
It's been a year after those posts about the limit of identifiers in Oracle Database. Does anybody know what can be done to get rid of that primitive limit? We are developing using Application Servers, Java, generated Code and a very nice object model, in which we can't just use abreviations because of early database age memory shortcomings.
We are currently using 8i in a very large organization. Is there any chance this version can be configured to allow larger identifiers? Is upgrading to 9i going to solve this problem? Is Oracle Databases really doomed forever because of a 20-year-ago limitation?
Please, I do like Oracle Databases. I don't want to be flooded with quick answers like "just use 32 character identifiers". I would like to hear a serious solution. Is anybody there still locked in the 8.3 filename paradigm of MS/PC-DOS? Does anybody has to fit an entire Enterprise System in segmented 640Kb of memory? Does anybody has to use monochrome character mode interfaces? Of course not those in the mainstream.
I also know that other hadrware and software products have lots os limitations. Take Windows 2000. Its command line has a limit of 255 characters! You can't have more than 4GB of memory in a PC! However, one can't expect one mistake to justify others.
I wish I were very wrong in this respect, and all it should be necessary is to turn on some kind of configuration parameter in 8i to allow us to develop high quality code.
Thanks for your attention.
Please, feel free to contact me if you have a solution.
[email protected]

Concatenate measure and dimension field shows not enough memory available

Hello, I need to concatenate a measure and dimension, for dummy test I did Cstr([Measures].[MeasureName]) + "dummy string, (unit of measure required here)"
but this generate an error, please see image for required measure.
Executing the query ...
Server: The operation has been cancelled because there is not enough memory available for the application. If using a 32-bit version of the product, consider upgrading to the 64-bit version or increasing the amount of memory available on the machine.
Execution complete
MDX Query:
WITH
MEMBER [Measures].[Cant Fact Umv2]
AS Cstr([Measures].[Cant Fact Umv]) + "dummy string, (unit of measure required here)"
SELECT
NON EMPTY { [Measures].[Cant Fact Umv], [Measures].[Cant Fact Umv2] } ON COLUMNS,
NON EMPTY {
([Categoria Materiales].[Categoria Material].[Categoria Material].ALLMEMBERS *
[Productos].[Producto].[Producto].ALLMEMBERS *
[Ventas Analisis].[UM Venta].[UM Venta].ALLMEMBERS ) }
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM [Ventas Analisis 2] CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS

Why cant this be done at the presentation? why should you do it in MDX?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Im try to import a large amount of pictures to Iphoto. I have pleant of space on my HD. But half way thru the transfer an error message comes up and says not enough disc space. How can I fix this?

Im trying to import a large amount of pictures to Iphoto. I have pleanty of space on my HD. But half way thru the transfer an error message comes up and says not enough disc space. How can I fix this?

I. I want to import 58.64 GB of Photos from an external HD
2. I have 278.28 GB space left on my HD
3. The exact error message goes like this......
Insufficient Disk Space
iPhoto cannot import your photos because
there is not enough free space on the
volume containing your iPhoto library
I Have researched this and most advice is to empty the iPhoto trash. I have already done this and it did not help.
Thank you for helping

Since updating to mountain lion i-movie reports not enough memory to send video to Idvd,I know there is ample memory as i have the full amount of memory installed and it is all working,help pls

Since updating to mountain lion,Imovie reports theres not enough memory to export to Idvd,I know this is not correct as i hve the maximum amount of memory installed and it is all working,i had no such problems when using Snow leopard,help pls.

Since updating to mountain lion,Imovie reports theres not enough memory to export to Idvd,I know this is not correct as i hve the maximum amount of memory installed and it is all working,i had no such problems when using Snow leopard,help pls.

I'm trying to add pictures to my ripped movies in my library but it keeps telling me it can't save the library because there's not enough memory. There is plenty on my hard drive, is there a setting that lets you increase the amount of memory?

I get a window popping up that says "The library iTunes file cannot be saved. There is not enough memory available.". I have 980GB free, I don't understand how to change a setting or what ever is causing it.

Hello Wyodor,
thanks for your reply on my question.
You are wright the index file is 308 KB.
And offcourse that I delete my files and documents is not an Iweb problem, but because my English is not that good, that I thougt I try to tell the whole story, and hope people can read trough the lines.
Why I didn't use Iweb to upload to the server is because the server company recommanded to use file zilla. And I am a nobody with this kind of things, so I did exactly what they tell me to do.
No, i did not make a backup of Iweb and the domain file, but reading other messages on this forum showed me that I can maybe try to make empty the cashfile (?)
and otherwise I have bad luck and have to make my website again. Offcourse I have a lot of examples from all the pages (copied from the local map to my USB stick) and my website is aprox. 15 Mb, (not so big) so it will cost me a few nigths.
But I'm still hoping on a miracle :-)
greetings Lasource

SSRS 2008 Column Chart with Calculated Series (moving average) "formula error - there are not enough data points for the period" error

I have a simple column chart grouping on 1 value on the category axis. For simplicity's sake, we are plotting $ amounts grouping by Month on the category axis. I right click on the data series and choose "Add calculated series...". I choose moving average. I want to move the average over at least 2 periods.
When I run the report, I get the error "Formula error - there are not enough data points for the period". The way the report is, I never have a guaranteed number of categories (there could be one or there could be 5). When there is 2 or more, the chart renders fine, however, when there is only 1 value, instead of suppressing the moving average line, I get that error and the chart shows nothing.
I don't think this is entirely acceptable for our end users. At a minimum, I would think the moving average line would be suppressed instead of hiding the entire chart. Does anyone know of any workarounds or do I have to enter another ms. connect bug/design consideration.
Thank you,
Dan

I was having the same error while trying to plot a moving average across 7 days. The work around I found was rather simple.
If you right click your report in the solution explorer and select "View Code" it will give you the underlying XML of the report. Find the entry for the value of your calculated series and enter a formula to dynamically create your periods.
<ChartFormulaParameter Name="Period">
<Value>=IIf(Count(Fields!Calls.Value) >= 7 ,7, (Count(Fields!Calls.Value)))</Value>
</ChartFormulaParameter>
What I'm doing here is getting the row count of records returned in the chart. If the returned rows are greater than or equal to 7 (The amount of days I want the average) it will set the points to 7. If not, it will set the number to the amount of returned rows. So far this has worked great. I'm probably going to add more code to handle no records returned although in my case that shouldn't happen but, you never know.
A side note:
If you open the calculated series properties in the designer, you will notice the number of periods is set to "0". If you change this it will overwrite your custom formula in the XML.

I have a WD My Passport for Mac (2 TB). It quit backing up my mac mini (8/2013) stating that it needed to be repaired. Our IT person reformatted it. Now time machine states that it can't back up 234 GB, because there's not enough space.

I have erased the passport for Mac and started all over. When there is ~15 minutes left in the initial backup of the mac mini hard drive (234 GB total), it gets weird and time machine states that it it calculating the time remaining. 24 hours later, it is still backing up but shows that <200 GB of 2 TB are available and it quits backing up stating that there is not enough room. HELP! The WD My Passport for Mac and the Mac mini are less than a year old.

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Not enough memory to print this document

Hello all,
I am trying to print tax forms, something I have done for years with no problem. I used a popular tax program to create a PDF file, copied this file to my G3/266 running Mac OS 9.1, and opened it using Acrobat Reader 4.0. Several pages show X's in boxes where the characters should be. I assume this is a font problem with Acrobat Reader 4.0, so I opened the file using Acrobat Reader 5.0, and all pages are rendered properly.
Once I tried to print, I remembered why I have been using Acrobat Reader 4.0: I've never been able to print from version 5.0. When printing from version 5.0, it spools to disk for background printing, then gives a warning: "Not enough memory to print this document". I tried printing the first page of Acrobat Reader's help pages - same problem. Here's a list of what I've tried:
Background printing on & off
Acrobat Memory: 12,288 KB (Suggested), 24 MB, 128 MB
Print Monitor: 16,384 KB, 128 MB
Always the same error.
My G3/266 has 768 MB of RAM
The printer is a LaserWriter Select, which is why I use Mac OS 9.1 to print.
Any ideas how to fix the font problem so I can print form Acrobat Reader 4.0 or how to make Acrobat Reader 5.0 print properly?

Hello Robert,
Thanks for the reply.
In Mac OS 9, the minimum and preferred memory allocation limits may be set by the user. By selecting the application's icon and selecting "Get Info", a panel provides these fields. The application always shows a suggested memory size. Acrobat Reader 5.0 has a suggested memory size of 12,288 KB, I tried raising it to 24 MB, then again to 128 MB. My computer has 768 MB of RAM.
I used TurboTax 2012 running under Mac OS 10.6.8 to create the PDF file by selecting the "Print Returns to Mail" button. It pulls up a system print window with the PDF button, from which I select the "Save as PDF..." option. On my Mac OS 10.6.8 system, the only printer listed in this window is the "Photosmart C4700 series [B6D0EB]", but this has always been the case, and is what I have always used to print.
I have opened the PDF file, created as described, using Preview, and used "Save As..." to save a new copy, using the "Black & White" Quartz filter, since this version of TurboTax wants to use colored tax forms. This should give me a PDF that is entirely created by Mac OS 10.6.8. I have also opened that PDF file again, and done a "Save As...", using the "Create Generic PDFX-3 Document" Quartz filter. I get the same errors when I try to print either PDF file.
How does one ask the moderators to move a post?
Scott

What is the use of notes button in the Service Request field in Siebel Application?

Hi,
I have an doubt with the "Notes" tab in Service request field of Siebel Application.
Can you please explain me about this tab.
Thanks
Thriveni

Sometimes 255 characters is not enough and with the Notes you can add more text.
And from a performance perspective it is better to make the Notes a seperate Tab, so it only gets retrieved when explicitly needed.

Not enough free space msg lies, 4 gig nano

I have a 4 gig nano, from iTunes it shows my nano has 3.71 GB free.
I have a song list that I've specified as the list to update to Nano, and the list shows it's 3.69 GB in size.
But when I try to update the nano with this list, I get the "not enough free space" message.
According to my math, I have .02 GB free and should be able to fit the list on the device.
What gives here?
thanks.
chris

I`ve had no replies, but answered my own question. For those interested . . .
If you have say 1500 songs and only 2 Gigs on you iPod here`s what you might do.
1. Load up your library with all of your music, you`re own music, copyright, etc. remember . . .
2. Make multiple playlists as you like. I manage my own for some things, example; I like to have some alternative in my Rock playlist, visa versa, etc, etc. so I pick & choose what goes where. I also use smart playlists for those that I don`t want altered, eg. Classical will only have Classical in the playlist, so the smart playlist automatically updates itself.
3. Manualy make a special playlist with ALL of your favourite tunes, let`s say it`s over 800 or so.
4. Next, use your iPod preferences to load up your iPod with contacts, photos, etc. and manage the music on part by selecting the playlists you want updated on the iPod. Start with choosing only small playlists that you definitely want on board. Then update and check your used space on your iPod. Let`s say you`ve got room for another 1.3 Gig`s of music.
5. Now create a smart playlist that selects music randomly from your new smart playlist of favourite tunes and also stipulate the "Limit to" amount by MB or GB. In the example above this would be 1300MB (as you can not place a decimal in a GB field).
6. Lastly, use your iPod preferences again to check the smart playlist you have just created and update it onto your iPod.
7. If you ever want to freshen things up, just delete all of the items in the smart playlist and start all over. This would be handy after adding a whack o new tunes to your library.
Voila, you've maximized the space on your iPod and loaded only your favourite songs in completely random order. Hope this helps somebody out there
PS. This thing they call iTunes is briliant realy!
Windows XP

Maximum characters of field

Hi,
I'm trying to find out what the maximum number of characters per field is.
Here is my case:
We are trying to have several 10k+ fields on one BC/table. We wanted what the maximum number per field is and how many of those field you can have.
On a field level we would use dtype notes which is mapped to the physical type of LONG. However, I found out that you can have at most 1 LONG field per table.
Are there any ways to have several large columns per table?
Thanks, Claus

Claus
Please remember that a single BC can map several tables however you are correct Oracle SGBD can only support one column of type LONG per Table.
If you can manage to restrict to less than 4000 bytes you can stay with VARCHAR type.
You can also consider using attachment to store large amount of information that can be accessed or indexed as well.
You should refer to Metalink3 article entitled "Support LONG field" (Doc ID 602146.1), you should also be aware that with version 8.0 and upward CLOB type is supported.
Good luck
JD
Edited by: EvtLogLvl on Oct 6, 2008 10:52 PM

Memory full.Not enough memory for operation.

To the Report Design Team,
It has been suggested that I post this issue here based on another thread I started: Re: Memory full.Not enough memory for operation.
The template contains a single 24 bit PNG image as a background in the Page Header section, plus 9 image records from a SQL Server image field over 3 pages (3 images per page). The images are all JPG at 3000x2000 (digital camera).
To summarize, we are experiencing three problems.
1. CR2008SP2 Designer issues a Memory Full error when Exporting to PDF.
2. Using a 3rd party PDF Printer (Bullzip PDF) and CR2008SP2 Designer generates a PDF, however, the CR2008SP2 API throws a "Memory full" exception suggesting Designer and API are different (see stack trace in linked message above).
3. With only 3 images on 1 page, CR2008 Designer Export to PDF takes 110 seconds to generate a 24MB PDF while our third party PDF Printer generates the same report in 17 seconds and 580KB.
Edited by: Don Williams on Sep 30, 2009 6:43 AM

The .rpt file size is 14MB with the Data Save option enabled, 12MB without Data Save. Presumably the 12MB file size is because of the 24bit PNG we have as our background.
The Designer executes the report in less than a second and we can scroll through all pages and see the image fields perfectly.
When we Export to PDF, the Designer takes a long time, eventually gets to the 77%, the 7th record and returns "Export report failed" followed by "Memory full". If we export only page 1 of the 3 pages, it also returns a Memory full error. However, when the same report is run with only 1 page, that page exports to PDF but with a ridiculously large size and export time.
The machine has 2GB of physical memory with an 8GB pagefile with Windows 2003 (latest everything). The process runs up to about 1GB before reporting the memory full error.
We've also tried a variety of other suggestions posted in the other thread with no success.
We're happy to provide the RPT file to the Report Team to diagnose the problem. Ultimately, we need to be able to produce a 15 page report with approximately 45 images.
Our preferred scenario is fixing problem 2. The CR Designer seems quite capable of rendering our report and printing it to our third party PDF printer in a timely manner with small size. However, the API reports memory full.
The API resides in a dedicated reporting web service with NO other code except for loading the report, setting parameters and printing. When executing, it uses up to about 1.1GB before reporting the error.
Are there any other suggestions for fixing what we have? Are there known problems with large images in reports? Do we need to lodge a formal support request?
Regards, Grant.
PS. Grr and my message formatting is lost when I edited this message!!!
There is a 1500 character limit and then all formatting is removed to save space. Break you posts into separate entries.
Edited by: grantph on Sep 30, 2009 2:49 AM

Not enough amount of characters in field

Similar Messages

Maybe you are looking for