Not getting a handle to Seeded VO from custom region controller

Hi Freinds,
I am embedding a custom region to a seeded page by personalization.
I have an AM and VO for custom region.
When i am trying to call a seeded VO from my custom region controller i am not able to get a handle to it properly.
I tried to get rootAm and then i called seeded VO. Some times i will get control but not able to create a rowsetiterator for that VO.
OAApplicationModule rootAm=pageContext.getRootApplicationModule();
oracle.jbo.ViewObject spupdateVo=rootAm.findViewObject("SpecialInformationUpdateVO1");
RowSetIterator tblvorow= tblVo.findRowSetIterator("sptblVoRow");
it is erroring at line 3.
please help me to understand how to get a handle to seeded VO from custom region controller.
My requirement is to loop through that seeded VO records.
Thanks in advance..
Jyothi

Hi,
I think you need to extend the controller at the pageLayout Region which would have access to all the regions and also their corresponding AMs.
--Sushant

Similar Messages

BP_CONT: not getting the contact person email value from custom controller

Hi Experts
not able to find the email address in any of the context node, actually my requirement is while creating the BP contact , get the email address BP_ADDR/StandardAddress STRUCT.E_MAILSMT . take this email id and check whether this email id exists in system if exists throw the error while saving . for this I did the codin in BP_CONT component on save method but while saving some times my custom controller is getting initiated some times it was not containing any value , kindly let me know how can I get the email value of contact person in BP_CONT component in view BPCONTOverview .
here is my code on method eh_onsave
lr_curo_bpcont_custcntrlr ?= me->get_custom_controller( controller_id = 'BP_CONT/BPCont' ).
IF lr_curo_bpcont_custcntrlr IS BOUND.
    TRY.
        lr_entity_privstdaddr ?= lr_curo_bpcont_custcntrlr->typed_context->privstdaddr->collection_wrapper->get_current( ).
        lv_privstdaddr_e_mailsmt = lr_entity_privstdaddr->get_property_as_string('E_MAILSMT'). " Get runtime email value of contact person
        lr_entity_bpcategory ?= lr_curo_bpcont_custcntrlr->typed_context->builheader->collection_wrapper->get_current( ).
        lv_partner_category = lr_entity_bpcategory->get_property_as_string('BP_CATEGORY'). " Get Partner Category value
      CATCH cx_sy_ref_is_initial cx_sy_move_cast_error cx_crm_genil_model_error.
    ENDTRY.
ENDIF.
here the problem is some times I'm getting the value and some times I'm not getting value the related objects also through get related entities contact person emial is not getting populated any where
kindly help what is going wrong
Thanks & Regards
Rajasekhar

Hello Rajasekhar,
Could you please share how you resolved this issue? I have the exact same requirement (duplicate check based on email).
Kind regards

Profit Center is not getting captured in Vendor line item from MIRO.

Dear Friends,
Profit Center is not getting captured in Vendor Line Items from MIRO Transaction for some New Business Users, where as for Old Users profit center is getting generated at Vendor Line Item.
We have provided the same authorization of old Users to new business users. (i.e. New user is a copy of old user)
Please help us how we can the get Profit Center in all transactions will be processed by New Business users.
I think we need to maintain user based authorization to get the Profit center in vendor Line items processed from T.Code:MIRO in SAP.
Looking forward for your kind cooperation in this matter
Thanks & Regards,
Naveen Kumar.

Hello Naveen,
I am not very sure about your query, as you might be knowing that the Profit Center is only updated in New GL tables (FAGLFLEXA, FAGLFLEXT) and hence the Vendor relavant tables would not.
The profit center information in the split lines or the line of the 'General Ledger View' are only displayed within transaction FAGLL03 which read the 'new' table for the NewG/L.
About profit center wise reporting, when New GL is active Please review attached consulting SAP note:
- 826357 Profit Center Accounting and new general ledger in
I hope this helps. If not, please provide an example of your requirement.
Thanks and regards,
Suresh Jayanthi.

JPA Error:Could not get a value to be injected from the factory

HI friends ,
I am trying to replicate the example JPAEXample01 using JPA in CE1 from the blogs written by
Sabine Heider/Adrian Görler.
During the testing of the method create employee i am getting the following error.
"Could not get a value to be injected from the factory."
I tried couple of examples using the above process, still held up with same error.
Any pointers to trouble shoot this ?
Thanks in advance
Chandra Dasari

HI Isaias Cristiano Barroso,
There are lot of enries most of them pertaining to properties set to yes or no.
out of which therre are tow errors. the log is as follows
Message Info: Failed (javax.management.MBeanPermission,#[:j2eeType=trace,name=EndToEndCentralMBean,],isActive,getGuidByName,getTraceLevelByName,getTraceLevelByName,importTrace,isFileExistsLocally,removeTraceFile)java.lang.reflect.InvocationTargetException
Failed (javax.management.MBeanPermission,*,DISPLAY)java.lang.reflect.InvocationTargetException
category: com.sap.security.core.role.PermissionData
Location:com.sap.security.core.role.PermissionData.get(ClassLoader)
Frankly the above log is above my understanding ,Prob it may help to you undertand my the issue
Thanks once again

Partner details are not getting captured to the purchase order from the ven

Hi,
Issue : ( ECC PO)
Partner details are not getting captured to the purchase order from the vendor master.
We found that the partners are not getting captured in ECC PO's automatically from the vendor master. We checked for all the config and everything seems to be o.k, but could not figure it out.
Any suggestions are highly appreciated.
Regards
Sudhakar

Hey Sudhakar,
I believe what is happening here is that the ECC PO document type has not been assigned to the partner determination procedure.
If this is working properly for standard POs, then,
Go to Partner detrmination under Purchasing> Partner Settings in Purchasing Documents> Assign Partner Schemas to Document Types.
and enter teh appropriate document type and refer it to the procedure you have for NB Pos

HT1725 I can not get any app to finish loading from the app store. Anyone else having this problem

I can not get any app to finish loading from the app store. Anyone else having this problem?

Why has nothing been done on this? I still have this problem today on Chrome and on the latest OSX.

I did not get ringtone on received of cal from anyone

I did not get ringtone on received of cal from anyone
regards
piyush adhiya

Here are some basic information how to use the PDF Pack: http://helpx.adobe.com/acrobat-com/kb/using-pdfpack.html
If you need to talk or chat someone live, go to Contact Customer Care and click on the Still need help? button. (Phone service is limited to daytime in the country you live.)

Hi, I have a Iphone 5. Its a little physically damaged at corders of steel band and now its not getting boot up. I am from INDIA and what to know what is the excat procedure for my phone replacement. Phone is under warranty.

hi can anone answer the question i have asked ??
Ques: Hi, I have a Iphone 5. Its a little physically damaged at corders of steel band and now its not getting boot up. I am from INDIA and what to know what is the excat procedure for my phone replacement. Phone is under warranty.

goelAkash wrote:
now who is responsible ?? I think the apple care people are responsible as the phone was charging when they cleaned that charging jack. fault is at their end.
It doesn't matter that the damage doesn't appear to be related to the problem you're having. Once the phone is damaged, the warranty is void.
Forum etiquette note: you don't need to post the identical response three times.
Best of luck.

Not getting email once agent go down from OEM

Hi,
We configured notification rule for agent unavailability and Mail Server is configured properly as we are getting test email but if i do emctl stop dbconsole (as we are not using grid) we are not getting the email
please can some one suggest me what i missed
Thanks

Hi,
When you shutdown the DB console, the DB Control agent is also stopped. Thus, there is no EM process left to handle notification. If you want to send a notification when the (DB Control) database is down, then see the following MOS note:
How To Send Notification Via Mail For Database Down From DBConsole (Doc ID 1108372.1)
By the way, with EM Grid/Cloud Control you can set up out-of-band notification to send an email notification when an OMS (Oracle Management Service) or the Repository database is down
Regards,
- Loc

Sales order create/change line item with reference to contract - Open quantity not getting deducted for copied line item from the contract

Hi friends,
Please provide some valuable inputs for the following scenario:
When a sales order line item is created(VA01) or changed(VA02) with reference to a Contract the open quantity is deducted in the contract which is a standard functionality. If the referenced line item is copied (custom enhancement to copy line item), then for the copied line item the open quantity is not getting deducted instead ATP quantity i.e. Available-to-promise is deducted.
Any inputs on how we can fix this functionality i.e. deduct the open quantity from the contract for the copied line item?
P.S. : Custom enhancement to copy line item is working fine, but open quantity is not getting deducted if the copied line item was referenced to a contract.
Thanks,
Sandeep
Message was edited by: sandeep

Sandeep,
Yes, that was my original interpretation. I was having a hard time believing that someone would ask such a question.
I guess, then, that you already know that you will have to add this logic to your enhancement. You should create your specifications and hand them off to a developer; ideally the one who created this enhanced solution in the first place.
I do not provide advice in these forums about details of enhanced solutions. Perhaps one of the other members will be more willing to do your work for you.
Best Regards,
DB49

Data not getting inserted in R/3 System from Webdynpro

Hi,
We were trying to insert some data into r/3 z-table using a Custom BAPI using RFC.
But the data is not getting inserted.
Through I commit is being performed explicity.
Please help:
Below is the code :
Controllor code :
public void wdDoInit()
    //@@begin wdDoInit()
     try{
        Z_Bapi_Rfq_Test_Input objStatus = new Z_Bapi_Rfq_Test_Input();
        wdContext.nodeZ_bapi_rfq_test().bind(objStatus);
//        Create a new element in node Bapi_Transaction_Commit_Input
      Bapi_Transaction_Commit_Input inputCommit =
      new Bapi_Transaction_Commit_Input();
      wdContext.nodeBAPI_TRANSACTION_COMMIT()
      .bind(inputCommit);
        //Bapi_Transaction_Commit_Input obj;
       // wdContext.nodeZ_Bapi_Quo_Salesrep_Status_Input().invalidate();
        //wdContext.nodeOutput().invalidate();
        //wdContext.nodeRfq_Status().invalidate();
          } catch(Exception rfqException){
                    wdComponentAPI.getMessageManager().reportException("rfqException="+rfqException.getMessage(),true);
    //@@end
public void executeBapi( )
    //@@begin executeBapi()
     try{
               Z_Bapi_Rfq_Test_Input obj = wdContext.currentZ_bapi_rfq_testElement().modelObject();
               AbstractList   objAbBapiPartner = new Bapiparnr.Bapiparnr_List();
               Bapiparnr objBapiPartner = new Bapiparnr();
               objBapiPartner.setPartn_Numb("0000001046");
               objBapiPartner.setPartn_Role("AG");
               //obj.addPartner(objBapiPartner);
               objAbBapiPartner.add(objBapiPartner);
              obj.setPartner(objAbBapiPartner);
              Bapisdhd1 objBapisdhd1 = new Bapisdhd1();
               objBapisdhd1.setSales_Org("2500");
               objBapisdhd1.setDistr_Chan("30");
               objBapisdhd1.setDivision("20");
               objBapisdhd1.setDoc_Type("ZRFQ");
             obj.setHeader(objBapisdhd1);
             obj.execute();
//             Synchronise the data in the context with the data in the model
               wdContext.nodeZ_bapi_rfq_test().invalidate();
          wdContext.nodePartner().invalidate();
               wdContext.nodeHeader().invalidate();
               wdContext.nodeOutput().invalidate();
               wdContext.nodeReturn().invalidate();
//               Z_Bapi_Quo_Salesrep_Status_Output outPut= obj.getOutput();
//               if(outPut!=null){
//                    List materialList=outPut.getRfq_Status();
//                    if(materialList!=null){
//                      wdComponentAPI.getMessageManager().reportSuccess("materialList="+materialList.size());
          } catch(Exception rfqException){
               wdComponentAPI.getMessageManager().reportException("rfqException="+ rfqException.toString(),true);
    //@@end
public void executeBapi_Commit( )
    //@@begin executeBapi_Commit()
     try {
//       Calls remote function module BAPI_Transaction_Commit
     wdContext.currentBAPI_TRANSACTION_COMMITElement().modelObject().execute();
     wdContext.nodeBAPI_TRANSACTION_COMMIT().invalidate();
     wdContext.nodeOutput1().invalidate();
     wdContext.nodeReturn().invalidate();
     wdContext.nodeReturn1().invalidate();
     } catch (WDDynamicRFCExecuteException ce) {
          wdComponentAPI.getMessageManager().reportException(ce.getMessage(), false);
    //@@end
View Controlloer Code:
public void wdDoInit()
    //@@begin wdDoInit()
     wdThis.wdGetCControllerController().executeBapi();
     wdThis.wdGetCControllerController().executeBapi_Commit();
             IWDApplication wedDynApplication=wdComponentAPI.getApplication();
             IWDApplicationInfo applicationInfo=wedDynApplication.getApplicationInfo();
             Collection collection=applicationInfo.getApplicationProperties();
    //@@end

Hi Gareth,
I was not getting enough time to reply, so replying late.
Actaully the problem was with r/3 BAPI Code itself.
There was condition in the begining of the code to check the data in the workare of R/3, so this condition was failing here.
But when we try to invoke that bapi from r/3 workbench it works fine because the data first comes to R/3 workarea then to R/3 Tables.
But when we insert data from Webdynpro framework , the data directly goes to R/3 Tables rather than the R/3 Workarea. So in Bapi the first condition was failing and no data was getting inserted.
So this was the problem, and we solved it.
Thanks,
Regards,
Aditya metukul

WBS Elements not getting created in ECC Project System from CRM 7.0

Dear all,
We are trying to integrate SAP CRM 7.0 with SAP ECC-PS module. The objective is to bring in the marketing plan and elements data from the CRM system, and to create the corresponding WBS in project system. We have done most of the configuration as recommended by SAP in both the systems, and we see that the BDOCS are getting generated and sent to the ECC system. The following steps have been successfully completed:
1.       Set up the RFC connections between the two systems
2.       Selected the connection type as Middleware in CRM system.
3.       Installed the cProject Add on in CRM box.
4.       Created a project scenario (with project and network profiles) in the PS system and assigned the same in the CRM system.
5.       The Project Scenario in PS config has the same name as the Project Type in CRM config.
6.       Created and released the campaign ids being created in the CRM system.
As already mentioned, we can see that the BDOCS are coming to the ECC system and are getting stored in BDOC_TRACK table. However the issue is that the corresponding WBS elements are not getting generated in the ECC system. Is there anything that that we are missing in the ECC box which would trigger the WBS element creation?
Request you all to share your inputs which would be immensely beneficial for us in achieving this integration.
Thanks and Kind Regards,
Aditya Shrivastava

Hello Aditya,
We too are facing this issue.. if you have resolved the issue could you please let us know the solution ?
Some inputs related to our system,
We have upgrade from CRM 4.0 to CRM 7.0 SP07 and R/3 backend system is on 4.7 SP27, earlier we have completed the upgrade on sandbox without any issues which was upgrade to CRM 7.0 SP04 but with SP07 we are facing the problem of WBS Element not getting created in R/3.
Your help is highly appreciated.
Thanks & Regards,
Sumukh Kapoor.

The system does not get Storage Location of the material from the Contract

Hi to all,
We are encountering a problem now regarding the PR to PO conversion. Our ABAPer has made a background job for the User to convert a PR to PO using ME59N.
Background Job : ZPTI_MM_PR_PO_CON
Program : RM06BB30
Tcode: ME59N
Variant : SAMPLE2_ME59N ( Plant, Vendor, POrg, Pgrp.)
Rule : When the PO is converted the STORAGE LOCATION of the material should be gotten from a CONTRACT/AGREEMENT instead of the SLoc defaulted in PR.
Problem: When the backround job is finished, the PO is converted but the STORAGE LOCATION did not get from the CONTRACT.
Steps done :
1. Create a Contract (ME31K)
    1.1 Specify the SLOC of the material
2. Create PR (ME51N) and enter the Contract Number inside the PR
    note : In the PR the material has a Storage Location which defaults from the Material Master.
3. Run SM36 and enter the job ZPTI_MM_PR_PO_CON
4. Set the job to "Immediately"
5. Click Steps icon and enter the program RM06BB30 and variant SAMPLE2_ME59N
6. Save
7. Go to SM37 and check the job if finished.
8. When the job is finished, check the PR if it has a PO.
9. Display the PO.
10. Check if the storage location in PO has gotten from the Contract
     The problem now appeared.
We have tried to use ME59N alone and not using the background job. The system has gotten the correct Storage Location, thus it got from the Contract.
Please help what should be checked on our side. Our ABaper is also currently debugging the program but we
are seeking help to fasten the solution.
Best Regards,
Elynne

Hi Elynne,
Definitively, it is a problem with ME59N background process.
It is better if you can create a message to SAP asking for the solution.
I only found the next SAP note:
Note 1287723 - ME59N in backgound does not populate PR details in PO.
But, I do not know if it will help to resolve your issue.
I hope this little information can help you in anyway.
Kind regards,
Sandra

Jobs not getting Scheduled when it is called from RFC

Hi Everyone,
I have Functional module in system1 which in turn creates a background Job, but when i call this Function module from System2 using RFC then the background job is not created. THought i debugged and the Function module on system1 is called successfully with right input parameters. M i missing anything ? Please advice
Regards,
Nikesh Kumar

Hi Chen,
Thanks for the reply. Actually the main problem is not with how the Background job is getting executed. Actually my function module schedules are job in system1 , but if the same func module is called via RFC from other system, it gets called successfully with same inputs (checked in debugging), but the background job does not get created.
Regards,
Nikesh Kumar

The Subsequent Requirm not getting deleted after deleting the Item from P.O

Hi all
The Subsequent Requirment for the Material is not getting cancelled even after deleting the Item from the Purchase Order and we have even deleted the Requirment for the Top level material . If we click on the Pegging requirment for the Subsequent requirment the system is telling that no Pegging Requirment exists but it is not getting deleted. Waiting for the feed backs

Kumar,
Run MRP for the Materials involed and let us know if there are any exception messages.
Regards,
Prasobh

Not getting a handle to Seeded VO from custom region controller

Similar Messages

Maybe you are looking for