Not getting the Exception_.toString in Forms

Hi,
I hope someone can help me.
I have a java jar file. The jar file executes properly from the command prompt. The functionality in this java method is to call a HELLO WORLD service of a hosted webservice. So on its own the jar works fine, I know this because I get a successful response from the service.
Now I followed steps from this link
http://www.oracle.com/webfolder/technetwork/tutorials/obe/forms/webservicefromforms/ws_10_1_3_from_forms.html to import this webservice jar into Forms and call the methods exposed from the jar.
Now I have two methods a simple multiply(a, b) which accepts two numbers and returns back the value. This works fine.
I have a second method callWebservice() where I call the webservice method and return a successful message.
When I call this method from Forms, I must be getting an error because it goes into the exception
1.EXCEPTION
2. WHEN ORA_JAVA.EXCEPTION_THROWN then
3. SHOW_MESSAGE('VAL_ALERT','444');
4. SHOW_MESSAGE('VAL_ALERT',Exception_.toString(ex));.................
I get the alert on line 3, but I don't get the next alert Exception_.toString().
Any help? please....

You did not mention what Forms version you are using so I will assume 10.1.2 based on your comments.
The server side jre/jdk has nothing to do with the client. Forms 10.1.2.3 is certified to use JRE 1.6.0 on the client side. You cannot update the server side jdk beyond 1.4.2 as it can damage the installation. As mentioned, the server side jdk has nothing to do with client side anyway.
The only restrictions to using JRE 1.6 on the client is that you are using 10.1.2.3 and IE7 or IE8. You could also use FF3. Refer to the certification matrix for Forms 10.1.2 to see the details:
http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BABGCBHA

Similar Messages

When I click + to add another sheet I do not get the option to enter new sheet or new form just a blank tab. What can I do

When I click "+" to add another sheet I do not get the option to select A new seet or A new form - just a blank page into which I cannot anything. How can I fix this.

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Restore the default home page
* https://support.mozilla.com/en-US/kb/How%20to%20set%20the%20home%20page#w_restore-the-default-home-page
Check and tell if its working.

Not getting the Connect to join the shared review notice in Adobe Reader 9

I click on my e-mail and entering Shared review but I am not getting the Adobe Acrobat Shared Review Window
that asks me to click to connect to join the Shared Review

There's not really anything you can do with just Reader. The creator of the form set it up to behave this way, by intention or not. It could have been set up so that a user is unable to enter more text than can be displayed in the area defined for the field, and that the font size would automatically decrease as the limit is reached, down to a minimum size of 4. If you know who created the form, you may be able to request a new version.
George

Problem in getting the parameters from teh form html with upload file

I have used the jspsmartupload package:
the html file:
<HTML>
<BODY BGCOLOR="white">
<H1>jspSmartUpload : Sample 5</H1>
<HR>
<form METHOD="POST" ACTION="sample5.jsp"
NAME="PW" ENCTYPE="multipart/form-data">
<table CELLSPACING="0" CELLPADDING="3" BORDER="1" WIDTH="474">


<tr>
<td width="150">
<div align="left">
<p><small><font face="Verdana">Text : </font></small>
</div>
</td>
<td width="324"><small><font face="Verdana">
<input TYPE="TEXT" name="myText" value="">
<br>
</font></small></td>
</tr>

<tr>
<td width="150">
<div align="left">
<p><small><font face="Verdana">Text Area : </font></small>
</div>
</td>
<td width="324"><small><font face="Verdana">
<textarea name="myTextArea" rows="4" value=""></textarea>
<br>
</font></small></td>
</tr>

<tr>
<td>
<div align="left">
<p><small><font face="Verdana">PassWord : </font></small>
</div>
</td>
<td><small><font face="Verdana">
<input TYPE="PASSWORD" name="myPASSWORD" value="">
<br>
</font></small></td>
</tr>

<tr>
<td>
<div align="left">
<p><small><font face="Verdana">Hidden : </font></small>
</div>
</td>
<td><small><font face="Verdana">
<input TYPE="hidden" name="myHidden" value="hidden">
<br>
</font></small></td>
</tr>
<tr>
<td><small><font face="Verdana">Select a first file :
</font></small></td>
<td><small><font face="Verdana">
<input type="file" name="FILE1">
</font></small></td>
</tr>
<tr>
<td><small><font face="Verdana">Select a second file : </font></small></td>
<td><small><font face="Verdana">
<input type="file" name="FILE2">
</font></small></td>
</tr>

<tr>
<td>
<div align="left">
<p><small><font face="Verdana">CheckBox : </font></small>
</div>
</td>
<td><small><font face="Verdana">
<input TYPE="CHECKBOX" name="myCheckBox" value="Value 1">
Value 1<br>
<input TYPE="CHECKBOX" name="myCheckBox" value="Value 2">
Value 2<br>
<input TYPE="CHECKBOX" name="myCheckBox" value="Value 3">
Value 3<br>
</font></small></td>
</tr>

<tr>
<td>
<div align="left">
<p><small><font face="Verdana">Radio : </font></small>
</div>
</td>
<td><small><font face="Verdana">
<input TYPE="radio" name="radio" value="Value 1">
Value 1<br>
<input TYPE="radio" name="radio" value="Value 2">
Value 2<br>
<input TYPE="radio" name="radio" value="Value 3">
Value 3<br>
</font></small></td>
</tr>

<tr>
<td>
<div align="left">
<p><small><font face="Verdana">Simple Select : </font></small>
</div>
</td>
<td><small><font face="Verdana">
<SELECT name="mySimpleSelect" >
<OPTION value="Value 1">Value 1</OPTION>
<OPTION value="Value 2">Value 2</OPTION>
<OPTION value="Value 3">Value 3</OPTION>
</SELECT>
<br>
</font></small></td>
</tr>

<tr>
<td>
<div align="left">
<p><small><font face="Verdana">Multiple Select : </font></small>
</div>
</td>
<td><small><font face="Verdana">
<SELECT multiple name="myMultSelect" >
<OPTION value="Value 1">Value 1</OPTION>
<OPTION value="Value 2">Value 2</OPTION>
<OPTION value="Value 3">Value 3</OPTION>
</SELECT>
<br>
</font></small></td>
</tr>

<tr>
<td colspan="2" width="474">
<div align="center">
<center>
<p><small><font face="Verdana">
<input
TYPE="Submit">
</font></small>
</center>
</div>
</td>
</tr>
</table>
</form>
</BODY>
</HTML>
the jsp file :
<%@page language="java" import="com.jspsmart.upload.*"%>
<%@page import="java.util.*"%>
<jsp:useBean id="myUpload" scope="page" class="com.jspsmart.upload.SmartUpload" />
<HTML>
<BODY BGCOLOR="white">
<H1>jspSmartUpload : Sample 5</H1>
<HR>
<%
     // Initialization
     myUpload.initialize(pageContext);
     // Upload
     myUpload.upload();
     // Files
     out.println("<BR><STRONG>Display information about Files</STRONG><BR>");
     out.println("Number of files = " + myUpload.getFiles().getCount() + "<BR>");
     //out.println("Total size (bytes) = " + myUpload.getFiles().getSize() +"<BR>");
     for (int i=0;i<myUpload.getFiles().getCount();i++){
          out.print(myUpload.getFiles().getFile(i).getFieldName());
          if (!myUpload.getFiles().getFile(i).isMissing())
               out.print(" = " + myUpload.getFiles().getFile(i).getFileName() + " (" + myUpload.getFiles().getFile(i).getSize() + ")");
               myUpload.getFiles().getFile(i).saveAs("/upload/" + myUpload.getFiles().getFile(i).getFileName());
          else
               out.print(" = vide");
          out.println("<BR>");
     // Request
     out.println("<BR><BR><STRONG>Display information about Requests</STRONG><BR>");
     // Retreive Requests' names
     java.util.Enumeration e = myUpload.getRequest().getParameterNames();
     // Retreive parameters
     while (e.hasMoreElements()) {
          String key = (String)e.nextElement();
          String[] values = myUpload.getRequest().getParameterValues(key);
          // Browse the current parameter values
          for(int i = 0; i < values.length; i++) {
          out.print(key + " = ");
          out.print(values[i] + "<BR>");
%>
</BODY>
</HTML>
The result shown is:
jspSmartUpload : Sample 5
Display information about Files
Number of files = 2
FILE1 = path.txt (240)
FILE2 = WS_FTP.LOG (146)
Display information about Requests
radio = Value 2
mySimpleSelect = Value 1
myTextArea = test
myPASSWORD =
myMultSelect = Value 3
myHidden = hidden
myText = test
myCheckBox = Value 1
myCheckBox = Value 2
myCheckBox = Value 3
I would like to know if i want to get back the parameters from the form ,
is that i must use Enumeration.
Because i have tried request.getParameter() to get the value of radio button, textbox, checkbox and select menu, but it get the null values.
Also, the function of Enumeration does not get the values of parameter in sequence as html form. e.g.In the html file, the first parameters should be textbox,but it displays the radio button's values first.
How to solve the problem .
Thanks

This sounds like a bug in the smart upload code. I have used this stuff before, but it's probably an older version, so maybe they broke something. Enumerations aren't usually guaranteed to keep things in any particular order. I would say for now, make a method to take the enumeration and a param name to find the value. And write to the JSPSmart people.

Cosuming web service using consumer proxy - not getting the output

Hello All,
I am not getting the consumer proxy output structue filled though the web service is successfully executed. I did the following steps.
1. Created a webservice form RFC BAPISDORDER_GETDETAILEDLIST
2. Created a consumer proxy for the above created WSDL document.
3. Tested the service by executing the proxy directly by feeding the input in the XML (sales document and partner view). it is working fine
4. Created a program to access the consumer proxy by passing the input(same input as per XML). I am not getting the output in the proxy output structure ( but I can see the RFC is successfully executed and having the right values in the debugging mode).
Is this the issue is due to the date fields (XML cannot consider a blank date )?
Please note: the partner output table parameter in the bapi (output I am looking for ) is not having any date fields.
Please help me to sort out this issue.
Thanks,
Gopi

Hi Gopi,
From your description, I assume you used the SE37 transaction's menu option Utilities -> More Utilities -> Create Web Service -> From the Function Module, to expose the BAPI concerned as a Web Service.
If this is the case, then it is possible that you are falling foul of your SAP User ID not having the necessary Remote Function Call authorization to execute the BAPI.
A prerequisite for successfully calling an RFC-enabled Function Module (which is what a BAPI is) is that the User ID used to call the function module must have the required RFC authorization (Authorization Object S_RFC). For example, when calling function module BAPI_CUSTOMER_GET_ROOT, if the User ID lacks the requisite authorization in the target system, the following error message will be received by the Consuming application:
User <User ID> has no RFC authorization for function group V02HBAPI.
Notice, as you can see from the above message, RFC execution authorization is implemented at the Function Group level, not at the Function Module level. In othere words, granting a user the authorization to a function group (authorization object S_RFC) enables the user to execute all RFC-enabled function modules contained within that function group.
I am guessing the BAPI works for you in debug mode because you are not calling the BAPI remotely.
Let me know if this helps.
Best Regards,
Andy.

Can not get the parameter?

I use a form to upload files,
like this:
<form name="gdform10" action="upload.jsp" ENCTYPE="multipart/form-data" method="post">
<input type="hidden" name="picName" value="wxds.jpg">
<input type="file" name="file">
<input type="submit" name="savePic" value="modify">
</form>
but I can not get the parameter picName in the upload.jsp,
like :
String pname = request.getParameter("picName");
but pname is null.

Hello,
In Jsp, if you want to upload file, you can't directly use "request.getParameter()".
There're two company provide components for you and it's free.
First is jspsmart company, it offer jspsmartUpload component and link is
http://www.jspsmart.com
Second is o'reilly, it offer MultipartRequest component and links is http://www.servlets.com/cos/javadoc/com/oreilly/servlet/MultipartRequest.html
for example, you use oreilly component.
<%@ page import="com.oreilly.servlet.MultipartRequest" %>
String saveDirectory = "c:\\Upload\\";
int maxPostSize = 5 * 1024*1024;
MultipartRequest multi= new MultipartRequest(request,saveDirectory,maxPostSize );
Enumeration filesname = multi.getFileNames();
while(filesname.hasMoreElements()){
String name = (String)filesname.nextElement();
FileName = multi.getFilesystemName(name);
File f = multi.getFile(name);
String ContentType = multi.getContentType(name);
ps. above codes is from book named "java server pages tech reference"

Refernce Nav igational Attribute is not getting the data in Infoprovider

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of ZPSBUSA, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object ZPSBUSA .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash

Hi,
I am facing the issue with Reference Characteristic which is a navigational attribute for which data is not getting populated in the cube.Please find the below scenario.
We have three characteristics 0RECV_WBS_E , 0WBS_ELEMT, ZPSBUSA .Char 0RECV_WBS_E is reference of 0WBS_ELEMT.
0RECV_WBS_E__ZPSBUSA,0WBS_ELEMT__ZPSBUSA are the Navigational attributes of 0WBS_ELEMT, these two are maintained as Navigational attributes in the cube and at info object level. The Nav Attribute 0RECV_WBS_E__ZPSBUSA is not getting the data in infocube where as 0WBS_ELEMT__ZPSBUSA is getting the data .The data is available for the two Nav attributes in the info object 0WBS_ELEMT .Can you please suggest why this reference Nav attribute 0RECV_WBS_E__ZPSBUSA is not getting data in the infocube.
Thanks,
SUbhash
Edited by: MarkSubhash on Dec 9, 2011 11:11 AM

I am not getting the data in Bex from the cube

Hi Experts,
i am not getting the data from the cube to Bex,
cube having the data, but i am not able to see this data in the Bex result area.
Can any one help me.
Best regards,
Bhaskar

Hi
In the manage cube, is reporting symbol is there for your requests
If you have any red requests delete them and refresh
If all requests having reporting symbols you may check the BEx without any filters or selection criterions
Regards
N Ganesh

Fire Fox sent not all the data in text form. Reached only piece of information. Where can I find the cache of sent text?

Fire Fox sent not all the data in text form. Reached only piece of information. Where can I find the cache sent the text?
For example, I posted an article on a news site, but found that only a small part of my article was posted.

I'm not sure whether Firefox saved that information. There is a chance that it is in the session history file, especially if you haven't closed that tab yet. To check that:
Open your currently active Firefox settings folder (AKA your Firefox profile folder) using
Help > Troubleshooting Information > "Show Folder" button
Find all files starting with the name sessionstore and copy them to a safe working location (e.g., your documents folder). In order to read a .js file, it is useful to rename it to a .txt file. Or you could drag it to Wordpad or your favorite word processing software.
The script will look somewhat like gibberish, but if you search for a word in your article that doesn't normally appear in web pages, you may be able to find your data.
Any luck?
For the future, you might want to consider this add-on, although I don't know how long it saves data after you submit a form: [https://addons.mozilla.org/en-US/firefox/addon/lazarus-form-recovery/].

Iam not getting the data on screen after using the user exit zxpadu01

Dear Freinds
            As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in   ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.   -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn.         --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008   --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
               i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.

Hi Pranesh,
               i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti.

Can not get the Cisco TSP to show UP - 2003 64bit

Can not get the Cisco TSP to show up on the list of Providers in Phone and Modem Options- Advance tab. Installed ver. 4.1, it seems to install correctly, with no errors but when I restart the server, there is no Cisco TSP001.tsp in the providers list. It works perfectly on my Windows 2003 servers, but will not work on this new Windows 2003 64 bit server. Any tricks to getting this to load?
Thanks
Keith

Hi
There is no 64-bit TSP yet. Whilst 32-bit apps will work OK for the most part on 64-bit via the WoW function, drivers tend to not be so flexible, and that's what TSP is...
You'll have to bother your Cisco accounts folks to get this prioritised, it is upsetting a lot of people...
Aaron
Please rate helpful posts...

How do I get the values from a form?

How do I get the values from a form?

You can try using request method..
request.getParameter("yourFormInputName");
Try this.

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

PAYABLES NOT GETTING THE REPORT OUTPUT IN PDF AFTER APPLYING RUP5 R12

Hi All,
RDBMS:10.2.0.3.0
Oracle Apps :12.0.4
OS:AIX 5.3
Problem Description:
We are presently facing an issue in Payables not getting the report output in PDF esp for the reports "Invoice Register", Invoice Hold Report and also other reports. We were able to generate the reports till our last test performed on last Thursday. This instance was cloned over the last weekend and probably the new upgrade to RUP5 R12,would have impacted it.
Concurrent Programs submitted are completed normal but on clicking "view output" results in Blank PDF output.
The error message what was shown is as below:
"Adobe Reader could not open 'AcrC.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)".
Where could we locate ther above 'AcrC.tmp' of Adobe Reader..
could anyone please share such an experience encountered for resolution..
Would appreciate an early response..
Thanks for your time!
Regards,

I suggest you speak to your DBA/sysadmin. This is not likely to be a reports problem.
Check that you can see the output from apps through the viewer (the report may not hav output anything)
Check whether you can print anything on that printer from apps.
May also be worth checking to see if you can print to another printer from this report.

I have an iPad 2 and the newest apple tv. I do not get the option on my iPad to mirror on AirPlay. I've tried all the suggestions I've seen. Does anyone have a new idea?

I have an iPad 2 and the newest apple tv. I do not get the option to turn mirroring on in the AirPlay function. I have tried the suggestions I've seen on here so far, but nothing has worked. Has anyone come up with a fix to this problem?

Your Apple TV and iOS device (iPad) need to be on the same network subnet. If they are you can verify when playing that the ATV is set as the output device by clicking the icon to the the right of the fast-forwrd button. Or you can double-click the home button and swipe left twice to see this.

Not getting the Exception_.toString in Forms

Similar Messages

Maybe you are looking for