Not getting the "under review" email after 2nd time re-submitting podcast.

I started by doing a test podcast (this has no real podcast info, the audio of it was simply me saying I was testing the feed to see if it would work). I submitted my podcast to the iTunes store and shortly after, I received an email saying thank you, my podcast is under review and I would receive an email later if it was approved or not. About 3 days later, I received an email saying it was rejected because it appeared to be a test podcast.. to shape it up, and re-submit when it was complete. I got to work and completed the podcast with chapters, artwork, voice, intro, outro, and all the text information needed. I went back to the iTunes store to submit the completed podcast, but never received that initial "thank you for submitting, it's under review, we'll let you know" ... email. I waited a few days, and nothing. It seems as though since I submitted a "BS" podcast at first, they're rejecting anything else I submit. Is my feed bad? or what could be the problem? Please help, thanks.
my feed:
feed://web.me.com/djchuckc/siteone/Melodica/rss.xml

Technically speaking, your feed appears to be OK: it can be subscribed to manually from the 'Advance' menu in the iTunes application (a process which does not involve the store).
However, your episode appears to consist of a collection of commercially issued tracks. If this is indeed the case, and if you do not have either the written permission of the copyright owners, or a licence from a recognized authority, then the iTunes Store is likely to reject your podcast on grounds of breach of copyright. If they do so I would expect them to notify you, though the email is usually a blanket one which implies that the rejection is on technical grounds: the process can take over a week as it has to be done by real people and there is likely to be quite a queue.

Similar Messages

Iam not getting the data on screen after using the user exit zxpadu01

Dear Freinds
            As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in   ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.   -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn.         --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008   --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
               i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.

Hi Pranesh,
               i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti.

BP_CONT: not getting the contact person email value from custom controller

Hi Experts
not able to find the email address in any of the context node, actually my requirement is while creating the BP contact , get the email address BP_ADDR/StandardAddress STRUCT.E_MAILSMT . take this email id and check whether this email id exists in system if exists throw the error while saving . for this I did the codin in BP_CONT component on save method but while saving some times my custom controller is getting initiated some times it was not containing any value , kindly let me know how can I get the email value of contact person in BP_CONT component in view BPCONTOverview .
here is my code on method eh_onsave
lr_curo_bpcont_custcntrlr ?= me->get_custom_controller( controller_id = 'BP_CONT/BPCont' ).
IF lr_curo_bpcont_custcntrlr IS BOUND.
    TRY.
        lr_entity_privstdaddr ?= lr_curo_bpcont_custcntrlr->typed_context->privstdaddr->collection_wrapper->get_current( ).
        lv_privstdaddr_e_mailsmt = lr_entity_privstdaddr->get_property_as_string('E_MAILSMT'). " Get runtime email value of contact person
        lr_entity_bpcategory ?= lr_curo_bpcont_custcntrlr->typed_context->builheader->collection_wrapper->get_current( ).
        lv_partner_category = lr_entity_bpcategory->get_property_as_string('BP_CATEGORY'). " Get Partner Category value
      CATCH cx_sy_ref_is_initial cx_sy_move_cast_error cx_crm_genil_model_error.
    ENDTRY.
ENDIF.
here the problem is some times I'm getting the value and some times I'm not getting value the related objects also through get related entities contact person emial is not getting populated any where
kindly help what is going wrong
Thanks & Regards
Rajasekhar

Hello Rajasekhar,
Could you please share how you resolved this issue? I have the exact same requirement (duplicate check based on email).
Kind regards

When I attempt to install a non-Apple app using a CD, I do not get the prompts that are supposed to occur automatically and can't find a way to make them start. I am installing Rosetta Stone.

When I attempt to install a non-Apple app - in this case Rosetta Stone - I do not get the prompts to follow after inserting the CD. I have searched for a way to activate them with no luck.

Rosetta Stone does make a Mac OS X compatible version of their software. You may be elligible for a crossgrade or a Mac version of their CD. Or you might need to consider installing Windows on your Mac, if the disc only has a .exe file.

HT201441 I have bought an used Iphone from a shop. then i put my account id in it. then it goes perfectly. After awhile i have done a reset all data and sitting then i could not get the Iphone started because it have been asked to put another email starti

I have bought an used Iphone from a shop. then i put my account id in it. then it goes perfectly. After awhile i have done a reset all data and sitting then i could not get the Iphone started because it have been asked to put another email starting with u
For contact [email protected]

Sounds like the Activation Lock is still set to the previous owner. If you are unable to get that Apple ID and password that iPhone is totally useless to you.
Take it back to the shop and demand your money back because they sold it to under false pretenses.
Allan

I have set up an Apple ID for my child who is under 13. I did not get the steps to set up the password for the ID. How do I do that now. The family sharing has sent an email notification to the email by how do I access it?

I have set up an Apple ID for my child who is under 13. I did not get the steps to set up the password for the ID. How do I do that now. The family sharing has sent an email notification to the email by how do I access it to accept.
Thanks.

Hey Lori,
You can set or change the password for an Apple ID by following the steps in this article -
Apple ID: Changing your password - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

Concerning Epson Printer 4880: after changing the Ink from Photo Black to Matte Black I'm not getting the Epson Software in Photoshop and Lightroom. I can not select the paper medium, I don't see my profiles. What is wrong?

That is priceless!!! Thanks! I sure needed a good laugh after spending/wasting hours & days trying to either get my c6280 to give up on its Ink System Failure fixation, or find a decent replacement. Unfortunately I need the Smart Web Printing feature that I guess only HP has, or I'd try a different brand. And now even HP has very few models with that available.
My error msg is a little different from those previously stated, but close: 0xc18a0201. Even tho there were frustrations with my c6280, I did like several of its unique features which are hard to find now under $100. I hate how HP (& I suppose other brands also) are CONSTANTLY changing models & then of course ink cartridges.
Oh heavens, I've had the c6280 a whopping 2 1/2 years! I'm sure they want us poor slobs to have to buy a new one every year & a day! To say nothing of the exorbitant prices for ink. And now if this one is really dead in the water, I have SIX unused #02 ink cartridges which I cannot return---I got them in a combo pack, & for some reason have wound up with THREE lite pink & THREE lite blue cartridges, while having to buy extras of the other colors, that ran out before the others!!! Yeah, & what's with that not being able to print in BLACK if a color runs out????
Anyway I really loved your essay! It's a classic! And says it all! I hate that we have to be 'slaves' to the electronic 'wonders'!!!

HT4623 I want to update my ipad 2 but I do not get the notice to update software on my ipad under settings general. I have not done any updates since I purchased the ipad last august.

I want to update my ipad 2 but I do not get the notice to update software on my ipad under settings, general. I have not updates since I purchased the ipad. Please help.

You have to be running iOS 5 in order to update via the iPad settings. You are running 4.3. You will have to update via the latest version of iTunes on a computer. After you update to iOS 5.1.1, you will be able to do OTA updates from the settings on the iPad.
How to update your iPad
http://support.apple.com/kb/HT4623

PAYABLES NOT GETTING THE REPORT OUTPUT IN PDF AFTER APPLYING RUP5 R12

Hi All,
RDBMS:10.2.0.3.0
Oracle Apps :12.0.4
OS:AIX 5.3
Problem Description:
We are presently facing an issue in Payables not getting the report output in PDF esp for the reports "Invoice Register", Invoice Hold Report and also other reports. We were able to generate the reports till our last test performed on last Thursday. This instance was cloned over the last weekend and probably the new upgrade to RUP5 R12,would have impacted it.
Concurrent Programs submitted are completed normal but on clicking "view output" results in Blank PDF output.
The error message what was shown is as below:
"Adobe Reader could not open 'AcrC.tmp' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)".
Where could we locate ther above 'AcrC.tmp' of Adobe Reader..
could anyone please share such an experience encountered for resolution..
Would appreciate an early response..
Thanks for your time!
Regards,

I suggest you speak to your DBA/sysadmin. This is not likely to be a reports problem.
Check that you can see the output from apps through the viewer (the report may not hav output anything)
Check whether you can print anything on that printer from apps.
May also be worth checking to see if you can print to another printer from this report.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
Regards.

Not getting the Connect to join the shared review notice in Adobe Reader 9

I click on my e-mail and entering Shared review but I am not getting the Adobe Acrobat Shared Review Window
that asks me to click to connect to join the Shared Review

There's not really anything you can do with just Reader. The creator of the form set it up to behave this way, by intention or not. It could have been set up so that a user is unable to enter more text than can be displayed in the area defined for the field, and that the font size would automatically decrease as the limit is reached, down to a minimum size of 4. If you know who created the form, you may be able to request a new version.
George

TS3899 I upgraded to iOS 7 and I lost emails that were in my inbox - I used to see all emails that I did not delete, now I only have emails from the past month - how can I get the old, undeleted emails back? Or, at least, show email older than one month o

I upgraded to iOS 7 and I lost emails that were in my inbox - I used to see all emails that I did not delete, now I only have emails from the past month - how can I get the old, undeleted emails back? Or, at least, show email older than one month old?

I upgraded to iOS 7 and I lost emails that were in my inbox - I used to see all emails that I did not delete, now I only have emails from the past month - how can I get the old, undeleted emails back? Or, at least, show email older than one month old?

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

It actually sounds like the warp text window is opening off screen.
Resetting the photoshop elements 10 preferences should fix it.
*Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
*Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
*Press Yes

TS3198 After doing the backup and restore how do you know if the phone is unlocked if you do not get the message: "Unlock Complete. Congratulations, your iPhone has been unlocked. To set up and sync this iPhone, click Continue."

After doing the backup and restore how do you know if the iphone is unlocked if you do not get the message: "Unlock Complete. Congratulations, your iPhone has been unlocked. To set up and sync this iPhone, click Continue."

If you don't get the message, your phone is NOT unlocked.

How do I view/print a pdf document in an email? I'm not getting the little hand icon.

How do I view/print a pdf document in an email? I'm not getting the little hand icon.

Ah, yes, I'm using Adobe Reader! That makes sense. Thanks so much for your reply. At the moment, I scan Word documents into my computer and they're automatically converted to PDFs. If I had Adobe Acrobat on my computer, and scanned in documents, would they open in Reader automatically or could I open them in Acrobat and therefore add password protection?

Not getting the "under review" email after 2nd time re-submitting podcast.

Similar Messages

Maybe you are looking for