Not inheriting group membership / users not showing in workgroup "Everyone"

Hi,
In the new OS X Lion Server Profile Manager, there is a default group called Everyone, that should contain all users.
However, it only shows the first user I created (UID 1025).
Users created after that are not automatically added to the group Everyone
I can assign these newer users to a Workgroup I created myself, but since they are absent in the Everyone group, I cannot assign devices to these users, and thus not properly manage these users and their devices.
Using Workgroup Manager to check on the membership of the users with UID>1025 I see that the inherited workgroup membership of Users (GID 403) is missing.
How can fix a problem with the inherited group membership of users?
Thanks in advance.
  Patrick

did you configure the people picker
http://technet.microsoft.com/en-us/library/gg602075(d=lightweight,v=office.14).aspx#section4
http://jaredmatfess.wordpress.com/2013/02/26/sharepoint-2010-people-picker-is-having-a-hard-time-finding-people/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
No need to configure the People Picker in a full trust between domains of the same forest.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

  • Policies assigned to groups - membership changes not working

    I have a single ZESM IR8 server setup.
    All security throughout my environment, ZESM and otherwise, is based on group membership.
    If I change a user from one group to another group this change does not reflect in their policy assignment.
    Scenario: GroupA = standard user policy, GroupB = power user policy.
    UserA was first in Group A and therefore got the standard user policy.
    UserA now requires the power user policy.
    Remove UserA from GroupA and add UserA to GroupB (in iManager).
    UserA does NOT get the "power user" policy that is assigned to GroupB
    Am aware that I can assign the policy at a user level but this is NOT an option in my environment. All security assignments MUST happen at a group level.

    What you observed is the expected behavior.
    ZESM doesn't updates group membership in real time once a policy has been published. I've described this behavior on previous posts.
    What the MC does behind the scenes when you click "Publish" on a container or group object is to assign the policy individually to each member/user. For groups, it resolves membership at the time the policy is published then the MC iterates among each member assigning the policy to each of them. That's why you don't see updates once the policy is published.
    Try Updating the published policy to see if that works. From the docs:
    Updating a Published Policy
    Once a policy has been published to the user(s) or computer(s), simple updates can be maintained by editing the components in a policy, and re-publishing. For example, if the ZENworks Endpoint Security Management Administrator needs to change the WEP key for an access point, the adminstrator only needs to edit the key, save the policy, and click Publish. The affected end-users and computers receive the updated policy (and the new key) at their next check-in.
    >>>
    From: laurabuckley<[email protected]>
    To:novell.support.zenworks.endpoint-security-management
    Date: 12/15/2009 7:16 AM
    Subject: Policies assigned to groups - membership changes not working
    I have a single ZESM IR8 server setup.
    All security throughout my environment, ZESM and otherwise, is based on
    group membership.
    If I change a user from one group to another group this change does not
    reflect in their policy assignment.
    Scenario: GroupA = standard user policy, GroupB = power user policy.
    UserA was first in Group A and therefore got the standard user policy.
    UserA now requires the power user policy.
    Remove UserA from GroupA and add UserA to GroupB (in iManager).
    UserA does NOT get the "power user" policy that is assigned to GroupB
    Am aware that I can assign the policy at a user level but this is NOT
    an option in my environment. All security assignments MUST happen at a
    group level.
    laurabuckley
    laurabuckley's Profile: http://forums.novell.com/member.php?userid=122
    View this thread: http://forums.novell.com/showthread.php?t=395870

  • LC Rights Management End User can not find groups or users during policy creation process

    hello,
    I'm using LC8.0.1 turnkey install on win2003 box.
    Problem is LC Rights Management End User can not find groups or users (search result is empty) during policy creation process, thus can not apply specific restriction to certain groups or users.
    I have create a user in the DefaultDom and assigned the following roles:
    Live Cycle Rights Management Invite User
    Live Cycle Rights Management End User
    How can I allow the above created user to search for groups and user during policy creation? Thanks.

    Good catch Phuc. Make sure you do this for each Policy Set as well as My Policies.
    Here's an overview of Policy Sets:
    http://blogs.adobe.com/security/2008/04/delegating_control_over_policy.html
    Cut and paste the URL.

  • ISW 6.1 not replication group membership

    Perhaps I misunderstand what should be happening .....
    Groups are synchronizing between my LDAP directory server and my Windows 2008R2 ADS however, group membership is not. I.E. The fact that bob is a member of the testgroup is NOT replicated .....
    Any ideas what I might be missing in my config?
    Thanks,

    did you configure the people picker
    http://technet.microsoft.com/en-us/library/gg602075(d=lightweight,v=office.14).aspx#section4
    http://jaredmatfess.wordpress.com/2013/02/26/sharepoint-2010-people-picker-is-having-a-hard-time-finding-people/
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
    No need to configure the People Picker in a full trust between domains of the same forest.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • User not inheriting group properties

    A group has app designer access to a particular app - why doesn't the users assigned to this group inherit this access?

    What documentation did you find this in? I feel like I knocked my head against a wall looking through documentation and never found what you sent. <BR><BR>Any idea when a group is useful if the individual rights override group rights? why bother with groups? Here is what I was looking at that I thought made sense to me:<BR><BR>You can grant security permissions to individual users and to groups of users on an Analytic Server. You can assign users to a security group so that they can share identical minimum permissions assigned at the group level. Users inherit all permissions of the group and can also have permissions that exceed those of the group. Users and groups are managed on a server-by-server basis; users and groups defined on an Analytic Server exist for all applications and databases on the server. <BR><BR>Permissions granted to users and groups take precedence over minimum permissions granted at the application or database level. For more information about security permissions, see About Security and Permissions.<BR><BR>thank you very much for your time.

  • Web Services Returns Runbook Not Found For One User, Not for another

    i am using Web Service to start runbooks.  most users are successful.  but one user gets an error "runbook not found".  the IIS logs show identical requests to the web service, except for the different username.  the user
    is an administrator on the machine and is a member of the OrchestratorUsersGroup.  is there some other group that the user should be a member of to run web services? 

    Maybe the user has deniad Access to the Runbook, check in Runbook Designer.
    Seidl Michael | http://www.techguy.at |
    twitter.com/techguyat | facebook.com/techguyat

  • UPS not resolving group membership for domain group

    I have two trusted domains A and B in a single forest. We have an AD group groupA in domain A that contains users from both domain A and domain B. SharePoint is installed in domain A. However, after UPS is run, when looking at the the group in the audience
    setting, you see that the membership count only reflects the members of domain A but not in domain B. The AD permissions for Directory replication is set correctly.
    So in summary-
    Domain A and Domain B (Full Trust)
    SharePoint in Domain A
    GroupA in Domain A with 5 users from Domain A and 12 users from Domain B
    Post UPS import in audience setup, group only shows membership count as 5 instead of 17
    Users from both Domain A and Domain B show up in the User Profiles
    Is this a known limitation? or is something wrong?

    did you configure the people picker
    http://technet.microsoft.com/en-us/library/gg602075(d=lightweight,v=office.14).aspx#section4
    http://jaredmatfess.wordpress.com/2013/02/26/sharepoint-2010-people-picker-is-having-a-hard-time-finding-people/
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog
    No need to configure the People Picker in a full trust between domains of the same forest.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Acrobat 9 Pro will not open for certain users - Not UNC path error

    Hello, I have recently installed Acrobat 9 Pro and It runs fine in an alternate account on my machine. When I go to run it on the primary account, It immediately throws an error. I have checked the registry and the account in question does not have its app data on a UNC path. Thank you in advance for your assistance.
    Nick

    This is a user forum, but with Adobe you might find better help here than in other places anyway. Many of the users here have been through most of the problems and if you hit one that has been there you will likely get a good answer. Some of the folks are good at making suggestions to try (as they would try) and others will try to replicate the problem if you give enough info. Many of us are a bit crazy for spending so much time here, but we learn along with helping, an aspect we enjoy - takes the edge off the day! (OK, maybe I am speaking for myself.)
    If you run into some other specifics that may help others provide you ideas to try, do come back. If you find a solution to your problem, please report it also. Bill

  • DIS Install fails to find notes.ini if multi-user notes install

    Yesterday I attempted to install the WebCenter Integration into a Citrix image and it fails with the error 'Error 2343: Specified path is empty'. After some experimenting on a physical machine I have been able to confirm the installer program fails if the Lotus Notes client has been installed with the multi-user option (what we require) but succeeds if it installed as single user.  With Lotus if it's installed as single user the data directory will be in the program install directory, if it's multi-user then it's in the user's profile. . Looking at the installer log you can see it can't locate the notes.ini file when it's a multi-user install.

    Install Notes as single user then switch to multi-user, there is a section in the guide here http://docs.oracle.com/cd/E28280_01/doc.1111/e10624/setup.htm#DISUS147 that tells you how to manually edit the Notes.ini file

  • Error messages: The song names for this CD could not be found online; User not registered for online use.  iTunes 12 - Windows XP - How do you fix this?

    iTunes 11 worked fine.  This only occurred after downloading iTuens 12.  I saw resolutions for Mac (deleting files), but how can this issue be resolved on Windows XP?

    Thanks!  That worked.
    I did the.....
    Press the WinLogoKey+R
    Type in %appdata% and press return
    Double click on Apple Computer
    Double click on iTunes
    Delete the file CD Info.cidb
    but that didn't work.
    Then I did the....
    Try deleting com.apple.iTunes.Gracenote.plist in the same folder
    and that didn't work.
    BUT....when I did the....
    and if that doesn't work try deleting iTunesPrefs.xml.
    the names displayed successfully, and I was able to download the album art work also.  I left the preferences as is before and after the file deletion.
    Thanks for your help!!!!!

  • AD groups membership not working for target Audience

    Hiya,
    Got a peculiar problem here. Trying to set audience on a link it doesnt work as we want it to. We have the following behavior:
    If adding users directly on SharePoint Group no problems. However if adding AD group to SP group, it doesnt work. Member count for AD Group is 0
    AD Group is created as Global, however tried placing it in a Domain Local group to see if that changed anything. SP synchs the AD groups fine, however it seems like it doesnt read the members, thus not granting any users access based on AD group membership.
    Not sure if this is default behavior or?

    Hi,
    It seems a known issue, but there is no workaround for this.
    It worth to reading these threads
    http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/8ede2f40-2b11-416b-b426-51c1b6479c33
    http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/586494b9-d259-4abf-a857-26137fa30460
    Hope this helps
    Thanks!
    Stanfford
    Everything will be fine.

  • User Unable to RDP in Win 2008R2 Due to Multiple Group Membership But Can RDP in Win 2003 Server

    We have built a new application server with Windows 2008R2 where set of users are local admin (application owners) and we have same kind of application server
    in Windows 2003 SP2 with same users as local admin. 
    Now in Windows 2008R2 servers these local admins are unable
    to RDP and get ACCESS
    DENIED whenever user tries to login but can login successfully in 2003 server.
    Now, strange case is, I found these admin users group membership with more than 600 groups and they are able to login win 2008 server as well if I remove their
    group membership to a minimum level say around 300.
    This is so confusing for me as user can login in WIn 2003 server with highest group membership but not in WIn 2008.
    We have applied Maxtoken registry also through GPO.
    Any idea what are we missing here.

    This has nothing to do with Directory Services so I will move to the General forum.
    One thing to look at is to make sure that you have RDP enabled on these new 2012 servers.
    http://winplat.net/post/2012/07/16/How-to-enable-Remote-Desktop-on-Windows-%E2%80%988%E2%80%99.aspx
    Paul Bergson
    MVP - Directory Services
    MCITP: Enterprise Administrator
    MCTS, MCT, MCSE, MCSA, Security, BS CSci
    2012, 2008, Vista, 2003, 2000 (Early Achiever), NT4
    Twitter @pbbergs http://blogs.dirteam.com/blogs/paulbergson
    Please no e-mails, any questions should be posted in the NewsGroup.
    This posting is provided AS IS with no warranties, and confers no rights.

  • Server Admin not displaying groups correctly

    Server 10.5.8, Mac Pro 4 core 2.66, 56 GB RAM.
    Had a crash yesterday, all back to normal now except:
    Server Admin's "show users and groups" is not displaying groups correctly" "users" is missng, and any new groups I created in WM are missing. Even if I sort by GID, they don't show up. And yet, if I type "staff" in the search bar, it shows up with GID 20. Also shared folders are showing up as groups

    Surely someone can at least point me in the right direction? I tried rebuilding the LDAP database, but that didn't fix it.

  • Unable to edit Distribution Group membership via Outlook (works via ECP).

    SITUATION: I am attempting to enable the ability for specified users to edit the membership of Exchange 2010 distribution groups via Outlook 2010.  I have configured permissions via RBAC for them to be able to do this by following the instructions and
    running the script found here:
    http://msexchangeteam.com/archive/2009/11/18/453251.aspx
    After running the script, users specified as group managers are able to edit group membership through the ECP.  But when they attempt to do so via Outlook, they receive the same message that they would see if the permission to edit group membership
    was not enabled:
    "Changes to the public group membership cannot be saved.  You do not have sufficient permission to perform this operation on this object."
    QUESTION:  Does anyone have any idea as to why we are still unable to edit group membership via Outlook, when all the permissions appear to be enabled doing so?

    Click Start
     Collapse this imageExpand this image
    , point to All Programs , point to Exchange Server 2010 , and then click
    Exchange Management Shell .
    At the command prompt, run the following cmdlet:
    New-RoleGroup DistributionGroupManagement -Roles "Distribution Groups"
    At the command prompt, run the following cmdlet:
    Add-RoleGroupMember DistributionGroupManagement -Member <var>UserName</var>
    Open Outlook and try to remove from your distribution list those members that you could not remove before

  • Samba winbind and group membership.

    I have a Solaris 10 (update 4) box (x86) that is joined to an active directory via samba/winbind.
    The users are working fine however their group membership is not.
    Users that should be members of certain groups do not seem to be: in that if I run
    "groups" and check the group member ship for myself I am missing entry of some groups yet I can verify that I should be a member of that group by running getent group "domain\\group name" and seing my username entered.
    winbind has the following parameters set
    winbind enum users = yes
    winbind enum groups = yes
    winbind nested groups = yes
    I am at a loss as to why it picks up some groups and not others.
    Has anyone come across something similar or know how to solve this issue?
    Regards,
    James

    Hi,
    I know this thread is very old but unfortunately I'm facing exactly the same problem under Solaris 10 Sparc. Any ideas? Maybe this issue was solved?
    Regards,
    Oliver

Maybe you are looking for