Not Read Receipts Since Office 2013 Upgrade

Hi,
We have just upgrade to Office 2013, form Office 2007.  and we appear to be having some issues with Read Receipts, if we ask for a read receipt on a mail, as soon as the mail is sent  we receive a not read receipt as shown below. 
"Your message
      To:   Ian Hart
      Subject:    RE: Consignment No.
      Sent: 24/04/2015 12:01
was deleted without being read on 24/04/2015 12:01."
I know that the mail are being received as I have sent a test mail from my work outlook 2013, to my own outlook.com and it was received fine although I did receive a not Read receipt on my work outlook.
if we resend a message with read receipts we do not get a not read receipt, could any one make any suggestions
1.) Mail Accounts are Microsoft Exchange  
I have looked into this further and the issue seams to be with the Read Receipts. 
I have sent an email with a Delivery Receipt and that delivers fine and I get a Receipt
I have sent a mail with only a read receipt and I get a not read receipt as shown in the post.
In not sure if the error is accruing because we are sending  to email accounts/ exchanges that have had the read receipt function disabled or if it is a problem full stop.
Best Regards 
Mark
   

Hi Mark,
A read receipt informs you that your message has been opened. However, do not rely solely on these receipts. In Microsoft Outlook, the message recipient has the option to decline to send read receipts. There are other scenarios where read receipts are not
sent, including if the recipient's e-mail program does not support read receipts.
I recommend you refer to the following article to troubleshoot the issue:
Track email with read receipts
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Similar Messages

  • Problem:  this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" ext

    Problem:  this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" extension
    i even already download a link
    http://www.microsoft.com/en-us/download/confirmation.aspx?id=44026
    which i read on another support page... but it doesnt allowed me to install it cause it says that i already have the disk of this program....
    Im afraid to erase it and not being able to get it back...
    What can i do!??
    Thanks in advance for this kind answer!!!

    fsolution wrote:
    Problem:  this mac is not reading an excell file after upgrading to yosemite...   Now it once i donwload the zip it appears with an ".ods" extension...
    If the "it" refers to a compressed (zipped) spreadsheet that you downloaded, the ".ods" extension is used by LibreOffice and probably OpenOffice (which are free versions of MS Office) for spreadsheets, which would suggest that wherever you're getting that "Excel" file from has switched to one of those programs. I've tried opening an .ods file from LibreOffice using MS Office 2013 for Windows and it does open though with a warning that some things have been changed. I don't know if Office for Mac can normally open .ods files. But if your need is to just open .ods files, take a look at LibreOffice.

  • Office 2013 upgrade so that users keep individual properties

    How do I set up an Office 2013 upgrade msi so that the individual user can keep their current properties? The msi will be sitting in a Skydrive account.
     I need to upgrade  about 25 remote users to Office 2013. These users are in different locations, mixture if window 7 and 8 machines. All machines are currently running Office 2010. 
    We are VL holders so I can create a msi file but after running two test upgrades most of the individual user properties (default templates, outlook settings) are not being kept. It looks like a new install.
    Any help is appreciated.

    I would recommend using USMT 5 for Office 2013.
    http://blogs.technet.com/b/nepapfe/archive/2013/04/15/using-usmt-v-5-to-migrate-your-profile-data-apps-amp-profile-settings.aspx
    Before that, we need this hotfix:
    http://support.microsoft.com/kb/2846838
    Tony Chen
    TechNet Community Support

  • "Not Read" receipt received from sender for all emails sent.

    We recently migrated from Exchange 2010 to Exchange 2013 and I've got one user that started having a strange problem after the migration.  She has Outlook set to request a read receipt for all emails that she sends and that works fine except that
    for every email she sends, she gets a "Not Read" receipt back and this not read receipt comes from her as if she sent the email to herself and didn't read it.  She also get the not read receipt if she deletes emails that are in her sent box
    and again, the not read receipt comes from her.  
    This user is using Outlook 2007 SP3 with all available updates installed.  We've tried a new profile and we've also tried on a different computer with the same results.  She doesn't have any rules set up except for the one for clearing categories
    that I believe is a default rule.  I've checked the settings of the rule and there is nothing there that would be causing this.  The other strange thing is that these not read receipts seem to come in batches.  If she sends one email the the
    not read receipt doesn't show up or at least not immediately.  If she sends 2 or 3 messages then she'll get all of the not read receipts for those 2 or 3 messages at the same time.

    Hi
    Please check this thread
    http://social.technet.microsoft.com/Forums/en-US/2dbf0122-8d63-4375-91b4-6ba2cf52ed2e/not-read-receipt-to-senders
    Tell the senders to stop sending messages with read receipts and it wont be a problem
    And to To determine the problem, Please test the feature on local side to check whether the symptom occurs. Meanwhile, you can let the sender in remote domain send message to other domain to
    check the result.
    Cheers 
    Zi Feng
    TechNet Community Support

  • My trackpad is not working properly since installing the upgrade. What should I do?

    My trackpad is not working properly since installing the upgrade. The keyboard is also not working right. What should I do?

    i am getting the same issues. i have to use an external mouse but i still get moves even without touching the mouse or trackpad. i upgraded to maverick about 2 months ago. how can i fix this fast? am a dj so i really need this problem fix. and now my keyboard is acting up even while i type

  • Office Add-In Not Working After Installing Office 2013

    I just installed Office 2013 on my Windows 7 Pro desktop with Acrobat X Pro installed and all of the Office Add-In's went away.  I find them very useful and would like to know how I can get them working again. Thanks.

    I wonder why Acrobat X is not compatible with Office 2013. Acrobat X was released late 2010, Office 2013 ca. two years later.
    I think you answered your own question.
    I don't want to buy an update to Acrobat XI for compatibility reasons only.
    While you may not want to buy an upgrade for compatibility reasons, this is one of the main reasons why people do pay for upgrades. After all, you paid for Office 2013! Does this mean that only Microsoft should get money for software, everyone one else should run around to support their incompatible changes for nothing?
    I just want that I can call the PDFmaker out of my Office applications. What is the problem?
    Isn't it clear?
    (Not an Adobe reply)

  • Ole_excel.WorkBooks.Open(filename)  is not working 64bit ms Office 2013

    Hi
    Please I am looking for your help to fix the problem while working with 64bit windows 7  with office 2013  , the following command is not working
    Please help  it would be very appreciate.  The following is my code
    ole_excel = CREATE OLEObject li_rtn = ole_excel.ConnectToNewObject("excel.application") IF li_rtn  = 0  THEN l_str_dir = is_filename li_nextrow = l_lng_rowcnt + 1 li_lastrow = li_nextrow + 1 ole_excel.visible = true ole_excel.Application.DisplayAlerts = False ole_excel.WorkBooks.Open(l_str_dir)  //  Error is coming here ole_workbook = ole_excel.application.workbooks(1) ole_worksheet = ole_workbook.worksheets(1) End if
    Please help
    With Thanks Polachan

    To conclude:
    Win 7 -> x64
    Office 2013 -> x86
    Your application -> x86
    I wonder if the error comes after:
    ole_workbook = ole_excel.application.workbooks(1)
    or after:
    ole_worksheet = ole_workbook.worksheets(1)
    The last command could also be written as:
    ole_excel.Application.ActiveWorkbook.Worksheets[1]
    That way ole_workbook = ole_excel.application.workbooks(1) isn't needed...
    I wonder why you use ole_workbook = ole_excel.application.workbooks(1). Is there any possibility you will open and work with two workbooks concurrently?
    Andreas.

  • Excel COM object calls break with Office 2013 upgrade on 64-bit OS?

    Out of the 1000+ computers in the company mine is the only one running 64-bit windows 7.  I have noticed that when i try to run a small DLL i created to convert Excel files to Tab Delimited files it is crashing only on my computer.
    I have debugged the source code and found that there is no real exception being thrown except a popup does appear in the background stating "We're sorry, but Excel has run into an error that is preventing it from working correctly. Excel will need to
    be closed as a result.  Would you like us to repair now? [Repair Now][Help][Close]"
    If i open excel via the main application this same popup comes up and when i click repair excel closes.  when re-opened Excel re-activates and then works fine.
    here is a sample of my (VERY simple) code which has worked for years on office 2007 with 64-bit OS:
    Dim excelPath As String = "C:\test.xlsx"
    Try
    objXL = CreateObject("Excel.Application")
    With objXL.Application
    .displayalerts = False
    .Visible = False
    .workbooks.Open(excelPath)
    .Workbooks(ExcelFileName).SaveAs(csvPath & csvFileName, Excel.XlFileFormat.xlCurrentPlatformText, , , , , Excel.XlSaveAsAccessMode.xlNoChange, , , , , )
    .workbooks(csvFileName).Close(csvPath & csvFileName, savechanges:=True)
    End With
    Catch ex2 As Exception
    Throw ex2
    Finally
    objXL.Quit()
    objXL = Nothing
    End Try
    I have isolated the exact line that is causing the exception to be thrown... 
    .Visible = False 
    Why would hiding the Excel UI cause an error of "We're sorry, but Excel has run into an error that is preventing it from working correctly" to be displayed?
    If i remark out this line then the application seems to work properly for me...

    That I do not know. Do you have another machine where Office 2013 is installed, and where you can test? It could be system configuration issue, could be a change in the application behavior or a difference between 32-bit and 64-bit. You are updating
    at least a couple of generations of software and now running in a 64-bit environment so there is always the potential for changes in behavior and software defects.
    Unfortunately, I do not have Office 2013 64-bit installed so I cannot test this scenario.
    You could also try posting to the
    Excel for Developers forum to see if anyone has encountered the same issue when using Excel automation.
    Paul ~~~~ Microsoft MVP (Visual Basic)

  • Office 2013 Upgrade - Retain Recently Opened Documents/WorkBooks from Office 2010

    Hello,
    In our Windows 7 environment, we are planning to upgrade our users from Office Professional Plus 2010 to Office Professional Plus 2013 via SCCM 2012 R2. One of the user requirements is that we are to retain their recently opened files/documents
    so that the history will still be shown even after they have upgraded over to Office 2013.
    From what I have researched, it may be possible to do this if we copy some of the user's registry keys from Office 2010 and export them to the Office 2013. However, I have not tried it and wanted to see what thoughts you guys may have on this.
    Has anyone run into this situation? Any advice on this? Thanks.

    Hi Jimmy,
    Did you get any error message when you try to open an Excel file/Word document?
    If so, you can post the error message and  event log here.Also ,if you had antivirus software installed, try to disable them to test this issue.
    In addition, what happens if you add the network server location as a trusted location?
    Wind Zhang
    TechNet Community Support

  • Synchronisation problems since Office 2013

    I have a BB Curve 9300.  I have recently installed Office 2013 (and Windows 8) on my PC and now cannot sync my BB with Office (calendar, notes and contacts only).  Email works fine.  The dialog box says that the BB cannot detect the PC.
    Is this a coincidence? Can anyone please suggest any help or contact details of BB that could help me.
    Many thanks for any suggestions!
    Regards
    JACANE

    Hey Jacane,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    Currently Outlook 2013 is not supported in BlackBerry Desktop Software.  I do not know when it will become supported.  
    This would be the main reason why you're having trouble synching.
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • "Cannot start Microsoft Outlook. Cannot open the Outlook window. The information store could not be opened." [Office 2013/Office 365]

    So here is the error in Outook 2013
    "Cannot start Microsoft Outlook. Cannot open the Outlook window.
    The information store could not be opened."
    Very Very frustrating having spent three hours today reading forums, installing, reinstalling etc.
    HELP?
    1) I have completely un-installed and reinstalled Outlook 2013 (And also all of Office 2013)
    2) Have blown away all profiles and created new ones.
    3) Have blown away all Outook data files and starting from scratch
    4) Have run /resetnavpane............in an attempt to rebuild the navigation pane
    5) Have gone into Registry and deleted all remnants of previous Outlook installs, HKey_Local, System Current
    config......Office etc.
    6) I have spent hours reading online fixes/technet forums etc..............to no avail.
    Please give more suggestions.
    Thanks
    Phil H   Charlotte, NC

    Hi,
    Basically you have tried a lot but the issue still exists, now one more suggestion I can provide is to make sure Outlook is not configured to run in Compatibility Mode:
    Take Windows 7 for example, in Start -> Type "Outlook" in the search box -> Right click on the "Outlook 2013" shortcut -> Click Properties -> Under Compatibility tab -> Make sure "Run this program in compatibility
    mode for" is clear.
    This method has resolved the issue for some users in this thread below:
    http://answers.microsoft.com/en-us/office/forum/office_2007-office_install/cannot-start-microsoft-office-outlook-error-cannot/e75265b4-044f-4d92-a078-1acbf9ae34d6
    I hope the information is helpful.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Can not reply email in Office 2013 when updating Server Pack 1

    Dear All,
    My company using office 2013 Pro and Google Apps Email. We can use send/receive normally. But when I updated Office to Office 2013 to SP1, it happened one problem when I reply mail. 
    "The operation failed. The messaging interface have returned an unknown error, If the Problem persists, restart Outlook" that is a message I received from outlook. When I check update in control panel I see one package update for
    Microsoft Outlook "Update for Microsoft Outlook 2013 (KB2863911) 32-Bit Edition". When I remove this update package it is normal. I don't know the reason why, everybody can help me to resolve this issue.
    Note: It is Ok with Office 365, and other mail... excluded Gmail.
    Thanks in Advance

    Hi,
    Sorry for the delay. Do you mean the problem was fixed after you removed KB2863911? I haven't heard such issue when installing KB2863911.
    Does this issue happen to all users in your organization? Please try to recreate your mail profile to check if it helps. For your convenience:
    http://support.microsoft.com/kb/829918/en-us
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support

  • Windows 8.1 system with new Office 2013 install not pulling down any Office 2013 updates from my SCCM 2012 SP1 server

    Hi,
    I've just setup a new Windows 8.1 system and added to my SCCM 2012 SP1 server and all is good and it pulled down all the correct Windows updates and pulls down automatically the FEP updates that are distributed from SCCM 2012 daily. 
    I just installed Office 2013 on this system and have activated it as necessary.  The problem is that the system doesn't seem to be pulling down any of the Office 2013 updates that have distributed thru SCCM.  I have other systems with
    Office 2013 installed and they have pulled down Office 2013 updates in the past when I published them.
    If I look at the Office 2013 updates in the SCCM console software section, I can see that for example it shows that Office 2013 SP1 (x86) is needed by one system and installed on 8 other systems and shows as downloaded and deployed.
    I've restarted the new system multiple times and also tried to force a software update check from the Configuration Manager applet but nothing seems to happen.
    What can I check to try and determine what the problem is?
    Thanks in advance,
    Nick

    Yes, the 8.1 system is a member of collection where the update deployment is targeted.
    Are there any specific logs I should check in the client?  If I check the WindowsUpdate.log I can see messages about the machine pulling down the FEP updates but that's all it appears to be doing.
    in CCM\logs, focus on the updatehandler and updatedeployment, to begin with
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • The lightscribe DVD drives does not read media. Attempted software upgrade to no avail. Error.

    The drive would not read media regardless of type or format of CD/DVD.  Downloaded and attemted lightscribe DVD software upgrade; however, during installation system generated error stating "InProc Error".  Something in programming of upgrade (get file...).

    You may want to try this Microsoft Fix-It.
    What can I do if my CD or DVD drive doesn't work properly?
    You could also try using System Restore to restore a previous restore point from before this became an issue.
    If that doesn't work, you could try a recovery. Recovering your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system recovery will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide. On most models you can hold '0' (zero) with the computer turned off. Then press the power button while continuing to hold '0' until the recovery utlity starts.
    - Peter

  • Can no longer add / remove to bookmarks / reading list since ios 6 upgrade

    Hi all,
    I upgraded my ipod touch to ios 6 last night, and since the upgrade I can no longer add / remove bookmarks or add / remove items to the reading list in safari.
    Whenever I try I get the 'Bookmarks are being synced. Please edit the bookmarks once syncing has completed.' message.
    So far I've tried;
    A hard reset
    Turning off Safari in the icloud settings
    I still can't do anything with the bookmarks / reading list, I just don't get the 'Bookmarks are being synced' message
    Ensuring that push notifications are enabled for icloud
    I'm not sure what to try next.....
    When I disable Safari in the icloud settings, it asks me if I want to keep a copy of previously synched bookmarks on my ipod - So far I have as I don't want to lose them.
    I'm guessing the next step is to not keep a copy and hope ios wipes them - If I do this will the bookmarks still be available in icloud when I turn safari data back on?
    Cheers
    Macca

    I actually managed to fix it! But unfortunately I don't know what I was that I did that helped.
    Anyways, this is kind of what I did.
    1. I tried to reset form bakup via iTunes, no change.
    2. I tried to reset as a new iPhone, problem still there and reading list also as bookmarks!? (several hundred)
    3. Noticed that I could delete a bookmark, once in a while, the other times I got the 'Bookmarks are being synced. Please edit the bookmarks once syncing has completed.' message.
    4. Because I figured that it was a memory problem, I thought it made sense to delete as many as possible, witch I did.
    5. Noticed that it was more likely that I coould delete a bookmark if I restarted Safari.
    6. Notice that it was even more likely that I could delete a bookmark if I turned the Safari sync with iCould off (with option detete information on iPhone) and then back on again.
    7. When I was about half way through deleting the bookmark list I suddenly discovered that all but one of the items in my reading list was 'waiting' and one was downloading. I kind of was 'unstuck' now.
    8. I started to delete items in my reading list, but every other time I got the 'Bookmarks are being synced. Please edit the bookmarks once syncing has completed.' message.
    9. It took a while to delete all bookmarks and items in the reading list.
    Hope you guys could use the info here to fix your problems too!

Maybe you are looking for