Not receving Network Monitor alert emails

All,As the title states, I'm not receiving alert emails from the Spiceworks Network Monitor, however, I was as of 7/30/15. Here's what I've done so far:Uninstalled, rebooted, and reinstalled the Network Monitor.
Confirmed that my email settings are correct in SpiceworksSend a test email from Spiceworks (that I received successfully)Whitelisted the email address that the alerts come from in the spam filter (this had actually been done months ago)Checked the spam filter; nothing caught up in itWe do not host our own email server so I do not know if anything changed with it, however, I am and can still receive email from Spiceworks itself (Help Desk ticket creations / test emails / etc.) just fine.
At this point I'm out of ideas as to why this isn't working. I can't find anywhere in the Network Monitor program to send a test email and/or...

Date: 11 August, 11 am PT / 2 pm ETSpeakers:Ryan Brown,CEO, xByte TechnologiesMax Kolomyeytsev,Product Manager, StarWind SoftwareHyper-converged virtualization solution of a datacenter grade is now available for SMBs / ROBOs.StarWind Hyper-Converged Platformunifies servers, hypervisor and associated software into a single scalable layer, bringing in quick deployment and operational simplicity to virtualization workloads and reducing related expenses. It does not dependent on any vendor and does not require specific qualification of IT staff.Join our webinar to learn about an all-in-one scalable Hyper-Converged Platform, which includes pre-configured servers, hypervisor from Microsoft or VMware, environmental protection and doesn’t require any SAN or NAS.Register!Discuss it on ourForum!

Similar Messages

  • System monitoring - alert email notification

    Hello Sapers,
    I already set up system monitoring in our Solution Manager but i would like to receive mail if any alert occur.  Unfortunatelly I did not find any way how to do it through Solution Manager. I guess there must be something like edit -> Automatic email transmission where I set up sending Earlywatch and SL reports to my mailbox, but how to set up alert email notification?
    I also tried another way - setting up CEN (in our sollution manager) in RZ20, there i created monitor where i have desired alerts from all remote systems configured in SMSY (i have not used sapccm4x or any other ccms agent), also tried autoreaction method on local and it is working fine (SCOT is set up) but when i tried create and assign central autoreaction method (sapnote 429265) during assigning i receive error "no ccms agent avalable for system" and it is not working. Do I really need configure SAPCCM4X on all remote systems when i want to use central autoreaction? I dont feel very confortable with this solution. I think there must be some other smarter way (maybe in solution manager).
    We also tried to connect our RZ20 monitor set to nagios (used in our company to monitor non sap servers and email notification), but we are not able to compile the ccms nagios plugin uder 64bit. AIX 5.3.
    I also heard little bit about ALM (Alert management) but dont know anything about forwarding alerts from RZ20 to ALM and transmitting email from there. But I think this sollution would be the most difficult from all mentioned above.
    Thank you very much for any help

    Josef,
      Somewhat chasing the point here - when you have the Solman and you look in your CCMS and you can see the other systems - it is all RFC data and not actually on the Solution Manager (the only local MTE's are those tha belong to the Solution Manager).  For the Solution Manager to Centrally Auto-React to threasholds (act as the CEN System), the information needs to be passed to the Central System through the agents.
      If you want to do email threasholds on your remote systems, you can configure it on each of the systems individually without agents as this is a CCMS Function that any SAP System can do - but this is not Central Auto-Reaction.  This is just actions taken on individual systems based on local MTE's.
      To Centrally Auto-React - you have to add the agents so the information is passed to the CEN to react on.
      I hope that this has clarified the situation a bit more.  If this answers your question, please set this thread to answered.

  • JDBC PL/SQL exception not shown in System Alert email

    Hi expert,
    The PL/SQL exception caught in the communication channeli  do not show up in the alert emails.  What could be  the reason behind it?
    We configured the SXMS_TO_ADAPTER_ERRLINES to capture the error message in alert category and configured the alert rule accordingly also. The system alert mail is show as below:
    If that is the PL/SQL error(Adapter Framework exception: null):
    Adapter type: JDBC
    Error text from the Adapter Engine:
    If that is the exception captured in Adapter Framework, not PL/SQL error:
    Adapter type: JDBC
    Error text from the Adapter Engine: Error when attempting to get processing resources: com.sap.aii.af.lib. util.concurrent.ResourcePoolException: Unable to create new pooled res ource: DriverManagerException: Can not establish connection:: SQLExcep tion: ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist IBM AIX RISC System/6000 Error: 2: No such file or direc tory
    Is that because the system alert only can print out the detail error message captured in Adapter Framework? Is there any way to capture all of the possible errors in adapter engine?

    Hi Ruby,
    Please use the container variable  "SXMS_TO_ADAPTER_ERRTXT" in your alert category configuration to get the error text from Adapter Engine.
    The details of the container variable can be found at this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/d0/d4b54020c6792ae10000000a155106/content.htm
    Regards, Gaurav.

  • Control monitoring alerts- RAR 5.3

    I've few mitigating controls in palce with frequency in reports tab as 1. I'm sure that the action given in the reports tab was not executed in the backend system by the monitor but still I do not get alterts for control monitoring in Alert monitor tab. Please advise

    Plz. note the correction:
    It is not 9 character or 5 character risk id that makes the difference. I was not getting control monitoring alert because the 9 character riskid I specified in the mitigating control was a permission level rule id and SAP says that from 5.3 onwards permission rules are not considered for any analysis. So we have to mention the riskid with * or we can specify the action level rule id to receive the control monitoring alerts.

  • SCOM Network Device Alerts

    Hi,
    In our environment we are using SCOM 2012 to monitor Servers and network Devices.we discovered network devices but the display name of the device is looking like 134.sub-91-245-149.ymzvw.com  and the same is displayed in alerts so it is very difficult
    to trace out the name and location of the device.But and in the property of the device it shows location and primary owner name of the device it will be helpful if i change the display name to its location name.
     Is there any way to change the display name of the device to its location name.
    Is there any way to modify the alerts so that it will be easy to figure out the location and name of the device.
    Thanks in advance
    Thanks Siva Aadhi-CIT. MCITP

    I have resolved part of my issue. Display name and full path name
         is now same as MIB2 System Name. Apparently Display name and
         Full path name is  pulled from DNS. So i was about to resolve part of
         my issue with just deleting the device from SCOM. creating DNS A record
         and re-discovering the device. but still when it comes to alert.. it shows
         MAC address as part of Path instead of display name or MIB2 Displayname.
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/fab18884-3a08-4684-99da-c6a9b801054f/scom-2012-network-monitoring-alerts>
    Have a nice day !!!

  • AC 5.3  Critical Action Alert Emails not being sent

    HI:
    We have set up Critical Action alerts for a couple of transactions and while the on-line alert logs are being generated correctly, the alert email is not being sent to the Risk Owner.
    Does anyone know where I can trouble shoot this issue?
    Thanks,
    Margaret

    >
    Alpesh Parmar wrote:
    > Margaret,
    >
    >     Have you set up the SMTP server in visual admin? RAR needs to use this server details to send out an email.
    >
    > Alpesh
    Hi AlpeshMargaret,
    Where are the instructions for setting up the SMTP server in visual admin for the purpose of Alert Generation? I am not seeing this in the Configuration Guide. Could you point me to the correct documentation?
    Thanks!
    Jes

  • Custom Alert Email Templates Issue - List Alerts emails not using customized XML alert template

    I have recently customized the XML alerts template (AlertTemplates.xml) for our site collection in SharePoint 2010 to exclude specific fields in the email when users who have subscribed to a list using the "Alert Me" feature.  I
    have renamed the custom alerts XML file and loaded the custom template in the following directory (%ProgramFiles%\Common Files\Microsoft Shared\Web server extensions\14\TEMPLATE\XML) and
    restarted IIS.  Once users subscribe to the alerts using the list using the "alert me" function they received the customized email as intended. 
    We needed to auto-subscribe users to the email alerts so what I did was used a powershell script to add users to the alert subscriptions using the script shown in below:
    Import-Csv D:\Temp\filename.csv | ForEach-Object{
    $webUrl=$_.WebUrl
    $listTitle=$_.List
    $alertTitle=$_.AlertTitle
    $subscribedUser=$_.SubscribedUser
    $alertType=$_.AlertType
    $deliveryChannel=$_.DeliveryChannel
    $eventType=$_.EventType
    $frequency=$_.Frequency
    $oldAlertID=$_.ID
    $web=Get-SPWeb $webUrl
    $testAlert = $web.Alerts | WHERE { $_.ID -eq $oldAlertID }
    IF ($testAlert) {
    $web.Alerts.Delete([GUID]$oldAlertID)
    Write-Host Old alert $oldAlertID deleted. -Foregroundcolor Cyan
    $list=$web.Lists.TryGetList($listTitle)
    $user = $web.EnsureUser($subscribedUser)
    $newAlert = $user.Alerts.Add()
    $newAlert.Title = $alertTitle
    $newAlert.AlertType=[Microsoft.SharePoint.SPAlertType]::$alertType
    $newAlert.List = $list
    $newAlert.DeliveryChannels = [Microsoft.SharePoint.SPAlertDeliveryChannels]::$deliveryChannel
    $newAlert.EventType = [Microsoft.SharePoint.SPEventType]::$eventType
    $newAlert.AlertFrequency = [Microsoft.SharePoint.SPAlertFrequency]::$frequency
    if($frequency -ne "Immediate"){
    $AlertTime=$_.AlertTime
    $newAlert.AlertTime=$AlertTime
    $newAlert.Update()
    Write-Host Created $newAlert.Title for $subscribedUser . -Foregroundcolor Cyan
    } ELSE {
    Write-Host Alert $alertTitle for $subscribedUser already done. Moving on. -Foregroundcolor Magenta
    When I ran the script and added the users and restarted the service, all users who were auto-subscribed via this method would get the email without the customizations that were done in the custom template.  All users who manually subscribed to the list
    using the "Alert Me" function would get the customized email. 
    Does anyone know why users who manually subscribe would get the custom email alert and why users who were auto-subscribed using the powershell script do not get the custom email alert?

    Hi  ,
    According to your description, my understanding is that users who were auto-subscribed using the PowerShell script do not get the custom email alert.
    For your issue, it can be caused by the auto-subscribed alert email which is generated by PowerShell script is  using OOTB alert template. You can add the following script into your script for setting
    the alerts’ alert email template:
    $contentService = [Microsoft.SharePoint.Administration.SPWebService]::ContentService
    $AlertsTemplateCollection =new-object Microsoft.SharePoint.SPAlertTemplateCollection($contentService)
    $newAlert.AlertTemplate = $AlertsTemplateCollection["YOUR_UNIQUE_TEMPLATE_NAME_VALUE"]
    Reference:
    http://sadomovalex.blogspot.com/2012/03/one-problem-with-updating-alert.html
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Eric Tao
    TechNet Community Support

  • Spiceworks Network Monitor not working after upgrading to version 1.2

    It's the same with my upgrade. Look like we need some oil and vinegar for the  pepper ;)

    Hello,
    I received the email informing the availability of the new release of Network Monitor. After upgrading, the web console locks at below step:
    The above issue persists whatever restarting the services or rebooting the computer hosting this service.
    I also noticed that the size of this release is 682KB which is obviously small compare to old version:
    Anyone else experiences the same issue?
    Thanks
    This topic first appeared in the Spiceworks Community

  • Email Alert Template Issue - List Alerts (Alert Me) emails not using customized XML alert template

    We have recently customized the XML alerts template (AlertTemplates.xml) for our site collection in SharePoint 2010 to exclude specific fields in the email when users who have subscribed using the "Alert Me" feature. We have renamed the
    custom alerts XML file and loaded the custom template in the following directory (%ProgramFiles%\Common Files\Microsoft Shared\Web server extensions\14\TEMPLATE\XML) and restarted IIS.  Once users subscribe to the alerts using the list "alert me"
    function they received the customized email as intended.
    We needed to auto-subscribe users to the email alerts so what we did was use a powershell script to add users to the alert subscriptions using the script shown below:
    Import-Csv D:\Temp\filename.csv | ForEach-Object{
    $webUrl=$_.WebUrl
    $listTitle=$_.List
    $alertTitle=$_.AlertTitle
    $subscribedUser=$_.SubscribedUser
    $alertType=$_.AlertType
    $deliveryChannel=$_.DeliveryChannel
    $eventType=$_.EventType
    $frequency=$_.Frequency
    $oldAlertID=$_.ID
    $web=Get-SPWeb $webUrl
    $testAlert = $web.Alerts | WHERE { $_.ID -eq $oldAlertID }
    IF ($testAlert) {
    $web.Alerts.Delete([GUID]$oldAlertID)
    Write-Host Old alert $oldAlertID deleted. -Foregroundcolor Cyan
    $list=$web.Lists.TryGetList($listTitle)
    $user = $web.EnsureUser($subscribedUser)
    $newAlert = $user.Alerts.Add()
    $newAlert.Title = $alertTitle
    $newAlert.AlertType=[Microsoft.SharePoint.SPAlertType]::$alertType
    $newAlert.List = $list
    $newAlert.DeliveryChannels = [Microsoft.SharePoint.SPAlertDeliveryChannels]::$deliveryChannel
    $newAlert.EventType = [Microsoft.SharePoint.SPEventType]::$eventType
    $newAlert.AlertFrequency = [Microsoft.SharePoint.SPAlertFrequency]::$frequency
    if($frequency -ne "Immediate"){
    $AlertTime=$_.AlertTime
    $newAlert.AlertTime=$AlertTime
    $newAlert.Update()
    Write-Host Created $newAlert.Title for $subscribedUser . -Foregroundcolor Cyan
    } ELSE {
    Write-Host Alert $alertTitle for $subscribedUser already done. Moving on. -Foregroundcolor Magenta
    When we ran the script and added the users and restarted the service, all users who were auto-subscribed via this method get the email without the customizations that were done in teh custom alert template.  All users who manually subscribed on their
    own to the list using the "Alert Me" function would get the customized email.
    Does anyone know why users who manually subscribe to the alerts get the customized email, and users who were auto-subscribed using the powershell script do not get the customized email and get the standard generic email template?

    Hi  ,
    According to your code, it create a new alert using SPUser.Alerts.Add() method. For this method, it will create a new alert based on the predefined alert template by default.
    If you only assigned the custom alert template to the list, users who manually subscribe to the alerts get the customized email, but users who were auto-subscribed using the PowerShell script get the standard
    generic email template.
    For your issue, you can set the new alert ‘s alert template:
    http://social.technet.microsoft.com/Forums/en-US/1b19c12f-fc37-48cf-8b59-6c09f095dc23/custom-alert-email-templates-issue-list-alerts-emails-not-using-customized-xml-alert-template?forum=sharepointgeneralprevious
    Here is a good blog you can have a look:
    http://blogs.msdn.com/b/sharepointdeveloperdocs/archive/2007/12/07/customizing-alert-notifications-and-alert-templates-in-windows-sharepoint-services-3-0.aspx
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Eric Tao
    TechNet Community Support

  • Not receiving Alert emails in TFS Projects

    Hi 
    When users in TFS are not receiving Alert emails for any of the notifications. I tried testing the email feature from TFS Admin console and its working fine (Received email)
    We enabled the send email in GUI.. However when we try to verify in command prompt , it shows as disabled.

    I was able to reproduce this with a desktop install of Team Foundation Server 2013, version 12.0.30723.0 (Tfs2013.Update3) and 12.0.31101.0 (Tfs2013.Update4).
    The command-line help for tfsconfig configuremail says:
    TfsConfig configureMail /Enabled:<true|false>
    /FromEmailAddress:<email address>
    /SmtpHost:<SMTP host name>
    Changes the From: email address and the SMTP host used for Team Foundation
    Notifications.
    I was able to enable or disable email alerts from the command line by setting the Enabled parameter to true or false.
    However when I ran the command without the parameter Enabled, it set the "Enable Email Alerts" checkbox to false, and then I got the message "Email alerts disabled."
    Notice that this parameter is not mentioned in the
    documentation.
    This behavior seems to be a documentation bug or tool bug, depending on the perspective. It might be that the intended default behavior was to disable alerts if no parameter was passed. If so it needs to be documented.
    However, the logical expectation would be for the command without parameters to just show its current Enabled, SMTP Server and Email From Address values. From this perspective this is a bug as it has an unintended and undocumented side effect. You might
    want to report this at the
    Microsoft Connect website.
    Clementino de Mendonça ALM Ranger

  • Not receiving alert emails

    Hi,
    I have created an alert catagory and using it for SAP and PI errors. The alert catagory is working fine.
    I am able to receive the alert mails for SAP in the mail id maintained in SU01(Email option is selected their).
    My id is maintained in SCOT as well.
    I am not able to receive the alert mail for PI errors, in my email (maintained in SU01).
    I am receiving the mail in alert inbox for PI errors.
    I can see the alert log in "Alrtdisp" and "sxmxalrt_logreader"
    I ran the RSALRTTEST report and received the alert email.
    But when I am trying to fail an interface from RWB and test, I receive email only in my alrt inbox, not email.
    Note: I am not able to see the mails in SOST
    Please help!!!
    Pooja

    Pooja,
    is your user in the ALRTCATDEF defined as a fixed recipient?
    Did you configure an alert rule in the runitme workbench?
    See also sap help:
    http://help.sap.com/saphelp_nw04/helpdata/en/88/21bc3ff6beeb0ce10000000a114084/content.htm
    and alerting rules and categories:
    http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
    See also Michals great tutorial:
    The specified item was not found.
    Regards,
    Konrad

  • SCOM 2012 Network Monitoring Does Not Show Servers

    We are testing out the network monitoring piece in SCOM 2012 but for some reason it never does show the servers.  We have a test switch with a monitored server connected directly to it but after the discovery completes it doesn't show the server as
    being connected.  The switch in question is a Juniper and if you look at the diagram view for the device it does show all of the ports under "not monitored" and the Processor and Memory under "Healthy."  The following event sequence shows up in the
    "Network Discovery Progress Events" view:
    Full Discovery Started for 1 request(s)
    Proceeding to discover all systems in repository
    Probing <<IP Address 1>>
    Probing <<IP Address 2>>
    Probing completed for <<IP Address 2>>
    PostProcessing started
    Probing completed for <<IP Address 1>>
    PostProcessing completed
    Switch::<<IP Address 2>> discovered successfully
    Switch::<<IP Address 1>> discovered successfully
    Discovery Completed / Devices discovered: 2 / Windows computers filtered: 0 / Devices in pending list: 0 / Devices excluded: 0
    No devices were found in filtered list after discovery
    Start processing connections to computers
    Finished processing connections to computers. Number of connections made: 0
    I've been trying to find some documentation on any other settings that are required to get network monitoring to work as advertised but so far I have struck out.  Help!

    Sorry Matt - you did say that very clearly in your previous post. I'll try and do better this time ;-)
    From here:
    http://technet.microsoft.com/en-us/library/hh212935.aspx
    From here:
    http://blogs.technet.com/b/momteam/archive/2011/09/20/what-gets-monitored-with-system-center-operations-manager-2012-network-monitoring.aspx
    "An agent computer that is directly connected to a device will have the connecting interface added to this group.  For this to work the management group must have the Windows Operating System management pack for the agent’s operating system, the Windows 
    Client Network Discovery management pack and the Windows Server Network Discovery management pack. The full discovery of the agent’s operating system has to be completed including the discovery of the agent’s network adapters. Then when network  discovery
    runs for the device it should stitch the port on the device to the network adapter on the computer and add the port to this group."
    So possibly:
    - check the management packs specified are imported
    - check the the agents network adapters have been discovered
    From here -
    http://technet.microsoft.com/en-us/library/hh212935.aspx - it is also possible to do this for non-scom monitored servers.
    "Ports that are connected to a computer are not monitored; only ports that connect to other network devices are monitored. You can monitor a port that is connected to a computer that is not agent-managed in the same management group by adding the port to
    the Critical Network Adapters Group."
    Cheers
    Graham
    Regards Graham New System Center 2012 Blog! -
    http://www.systemcentersolutions.co.uk
    View OpsMgr tips and tricks at
    http://systemcentersolutions.wordpress.com/

  • Link in alert email for PPTX document leads to "File Not Found" - Caused by encoding error

    We have an issue brought to our attention by our customers that has me scratching my head.  When our users sign up for an alert on a document library and a PowerPoint document is edited, the link in the alert email looks something like this:
    http://Teams/sites/TeamABC/_layouts/PowerPoint.aspx?PowerPointView=ReadingView%26PresentationId=/sites/TeamABC/Shared%2520Documents/SharePoint%2520Service%2520Management.pptx
    Although the issue looks like it could be with the double encoded spaces (first encoded is %20, second encoding is %2520), those work fine.  The issue comes from the %26 between "ReadingView" and "PresentationId".  The %26 is an encoded "&". 
    If I replace %26 with "&" the url string works fine.  I have tried this in IE, Firefox, and Chrome and the result is the same in each, so it's not a browser issue.
    The question then becomes, is the error the encoding when the alert is created and sent or is the error with the http handler in SharePoint that doesn't appear to understand how to handle %26?  With that, any ideas on how to fix this (other than tell
    users to edit the url in the browser changing %26 to "&")?
    I should mention we are using SharePoint 2010, SP1, plus August 2011 CU, with Office Web Apps. 

    Hello,
    I think it is because we cannot use "&" in the file name when uploading the file to Sharepoint, we will receive the
    message:
    The following characters cannot be used anywhere in a site name, in a subsite name, or in a site or Active Directory group name:
    tilde (~)
    number sign (#)
    percent (%)
    ampersand (&)
    asterisk (*)
    braces ({ })
    backslash (\)
    colon (:)
    angle brackets (< >)
    question mark (?)
    slash (/)
    plus sign (+)
    pipe (|)
    quotation mark (")
    You can check this
    post on SharePoint forum:, if you have further questions, you can also post the question on the SharePoint 2010 forum
    here
    Hope above helps.
    Daisy Cao
    TechNet Community Support

  • Strange Alert email I did not sign up for

    I received an email from [email protected] It says I have 527 products in my profile.  I have two HP products: a Pavilion Desktop and an all-in-one printer.  The subject line is “Recommended Alert for your HP-UX and HP-UX 11.X”. I have no idea what this is.  The email arrived 8/8/2012 6:45 AM. 
    On the same day, at 5:24 PM, I received an email thanking me for signing up for e-communications.  I never signed up.  A tech in India helped me over the phone to download a BIOS update from HP for my desktop a few days ago but I am not aware he did anything to sign me up for updates on 527 products.
    The link on the Alert email takes me to: https://h41183.www4.hp.com/login.php?Country=US&Language=US&URL=Products&Email=b9f4a0da1ca7a07c97cf5...
    This is a site for enterprise and SMB customers and I am not one and I cannot sign in here.  I am registered with the HP support community, but that ID/PW does not work at the site the email is linked to.
    I do not even know who to ask how this happened or why I got these emails.  It is obviously a mistake.  My email has somehow gotten into someone else's account or something.  Any suggestions?
    Also at the end of a very long list of Recommended Updates for products I do not have, there was an update for Product: “Desktop Application Software”  with OS: Windows.  It was HP Update Software Utility ver 5.003.001.001 (25 Jun 2012).  I did download and install this but now fear I should not have as it may conflict with updates that are initiated by HP Support Assistant which was on this computer when I bought it in January of this year.  Any advice on this would be appreciated.

    I just received a similar email from [email protected] and I am reluctant to click on the link, as maybe it has a virus.  It says I own two Hp products and it looks like an old laptop that I no longer have

  • Network monitor not working at all

    Hey
    Does anyone have any idea why suddenly monitoring data/services thru network monitor is not working at all?
    I have tried to monitor services thru Chrome,FF and IE. Works only on IE but in Chrome and FF the services seem to wait for an answer that they will never get. But once i turn the network monitor off, all work fine in all browsers.
    I did disable firewall and virusprotection while permforming these test but they did not had any affect on the matter.
    Any help ?
    Cheers
    Lauri

        Hi redstorm,
    Let's get your Network Extender to an optimal working condition! Please ensure that your access settings are configured correctly, and make sure to add your phone as a contact. Keep us posted. http://vz.to/1cU4Gwx
    AntonioC_VZW
    Follow us on Twitter at www.twitter.com/VZWSupport

Maybe you are looking for