Not saved in tables

Hi ,
i created customer master and i was trying to go change .....it giving no values weret hr...
i meann it was not updated in tables....
plzz guide me how can i
regards
Luckky

HI,
I created customer and i got internal number....if i try to open in change mode.
System ginving"Customer 2 has not been created" this error....
How can i see Custmer master...
Regrads
Luckky

Similar Messages

  • Storage location Data is not saving in table MARD using BAPI method.

    Hi Experts,
    TABLES: T001L, "Storage Locations
            MARA,  "General Material Data
            MAKT,  "Material Descriptions
            MBEW,  "Material Valuation
            MARC,  "Plant Data for Material
            MARD.  "Storage Location Data for Mate
    DATA: BAPI_HEAD   LIKE BAPIMATHEAD,  "MATERIAL
          BAPI_MAKT   LIKE BAPI_MAKT,    "Material Description
          BAPI_MARA1  LIKE BAPI_MARA,    "Client Data
          BAPI_MARAX  LIKE BAPI_MARAX,
          BAPI_MARC1  LIKE BAPI_MARC,    "Plant View
          BAPI_MARCX  LIKE BAPI_MARCX,
          BAPI_MBEW1  LIKE BAPI_MBEW,    "Accounting View
          BAPI_MBEWX  LIKE BAPI_MBEWX,
          BAPI_MARD1  LIKE BAPI_MARD,    "Storage location
          BAPI_MARDX  LIKE BAPI_MARDX,
          BAPI_RETURN LIKE BAPIRET2.
    DATA: BEGIN OF INT_MAKT OCCURS 100.
            INCLUDE STRUCTURE BAPI_MAKT.
    DATA: END OF INT_MAKT.
    DATA: BEGIN OF INT_MAT OCCURS 100,
             WERKS(4),     "Plant
             LGORT(4),     "Storage location
             MTART(4),     "Material type
             MATNR(18),    "Material number
             MAKTX(40),     "Material description
             MATKL(9) ,    "Material group
             MBRSH(1),     "Industry sector
             MEINS(3),     "Base unit of measure
             GEWEI(3),     "Weight Unit
             SPART(2),     "Division
             EKGRP(3),     "Purchasing group
             VPRSV(1),     "Price control indicator
             STPRS(12),    "Standard price
             PEINH(3),     "Price unit
             SPRAS(2),     "Language key
             BKLAS(4),     "VALUATION CLASS
             VERPR TYPE VERPR_BAPI,    "MOVING PRICE
             BWTTY(1),     "Valuation Catogory
             MLAST(1),     "Price determination
             MLMAA(1),     "Material Ledger
             EKLAS(4),     "Valuation Class for sales order stock
             QKLAS(4),     "Valuation Class for Project Stock
             ZKPRS TYPE DZKPRS, "Future price
             ZKDAT TYPE DZKDAT, "Valid From Date
             BWPRS TYPE BWPRS,  "Tax price 1
             BWPS1 TYPE BWPS1,  "Tax price 2
             VJBWS TYPE VJBWS,  "Tax price 3
             ABWKZ TYPE ABWKZ,  "Devaluatin indicator
             BWPRH TYPE BWPRH,  "Commercial price 1
             BWPH1 TYPE BWPH1,  "Commercial price 2
             VJBWH TYPE VJBWH,  "Commercial Price 3
             XLIFO(1),          "LIFO/FIFO revelant
             MYPOL(4),          "Pool no for LIFO
             MMSTA(2),          "Plant specific material status
             AUSME TYPE AUSME,  "Unit of issue
             QMATA(6),          "Material Authorization group
             RBNRM(9),          "Catalog Profile
             WEBAZ TYPE WEBAZ,  "Goods reciept processing time in days
             PRFRQ TYPE PRFRQ,  "Recurring Insepction
             SSQSS(8),          "QM Control key
             QZGTP(4),          "Certificate Type
             QSSYS(4),          "Required QM system for vendor
           END OF INT_MAT.
    DATA: V_MATNR TYPE MARA-MATNR.
    SELECT-OPTIONS:
                PLANT    FOR  MARC-WERKS OBLIGATORY MEMORY ID PLT,
                S_LGORT  FOR  MARD-LGORT MEMORY ID STL,
                MATERIAL FOR  MARA-MATNR MEMORY ID MAT,
                MATLTYPE FOR  MARA-MTART MEMORY ID MTY,
                DIVISION FOR  MARA-SPART MEMORY ID DIV.
    PARAMETERS:  F_FILE LIKE RLGRAP-FILENAME
                 DEFAULT 'C:\DATA\ZMATERIAL.XLS' MEMORY ID F_FILE,
    GETDATA AS CHECKBOX, "Tick to download materials data to local harddisk
             UPDDATA AS CHECKBOX. "Tick to update date to Materials Master
    IF GETDATA = 'X'.
       PERFORM DOWNLOAD_DATA.
       PERFORM DOWNLOAD_FILE.
    ENDIF.
    IF UPDDATA = 'X'.
       PERFORM UPLOAD_FILE.
       PERFORM UPDATE_MM.
    ENDIF.
    FORM DOWNLOAD_DATA.
    SELECT * FROM MARC  WHERE LVORM EQ ' '
                          AND WERKS IN PLANT
                          AND MATNR IN MATERIAL.
        CLEAR MARA.
        SELECT SINGLE * FROM MARA WHERE MATNR =  MARC-MATNR.
        CHECK MATLTYPE.
        CHECK DIVISION.
        CLEAR MBEW.
        SELECT SINGLE * FROM MBEW WHERE MATNR =  MARC-MATNR
                                    AND BWKEY =  MARC-WERKS.
        CLEAR MAKT.
        SELECT SINGLE * FROM MAKT WHERE SPRAS =  'EN'
                                    AND MATNR =  MARC-MATNR.
        CLEAR MARD.
        SELECT SINGLE * FROM MARD WHERE WERKS IN PLANT
                                  AND   LGORT IN S_LGORT.
        WRITE:/ MARC-WERKS,    "Plant
                MARD-LGORT,    "Storage location
                MARA-MTART,    "Material type
                MARA-MATNR,    "Material number
                MARA-MATKL,    "Material group
                MARA-MBRSH,    "Industry sector
                MARA-MEINS,    "Base unit of measure
                MARA-GEWEI,    "Weight Unit
                MARA-SPART,    "Division
                MARC-EKGRP,    "Purchasing group
                MBEW-VPRSV,    "Price control indicator
                MBEW-STPRS,    "Standard price
                MBEW-PEINH,    "Price unit
                MBEW-BKLAS,    "VALUE CLASS
                MAKT-SPRAS,    "Language key
                MBEW-BKLAS,    "Valuation Class
                MBEW-VERPR,    "Moving price
                MAKT-MAKTX,    "Material description
                MBEW-BWTTY,    "Valutaion Catogorey
                MBEW-MLAST,    "Price Determination
                MBEW-MLMAA,    "Material Ledger
                MBEW-EKLAS,    "Valuation class for Sales order stock
                MBEW-QKLAS,    "Valutaion Class for Project Stock
                MBEW-ZKPRS,    "Future Price
                MBEW-ZKDAT,    "Valid From Date
                MBEW-BWPRS,    "Tax price 1
                MBEW-BWPS1,    "Tax price 2
                MBEW-VJBWS,    "Tax price 3
                MBEW-ABWKZ,    "Devaluatin indicator
                MBEW-BWPRH,    "Commercial price 1
                MBEW-BWPH1,    "Commercial price 2
                MBEW-VJBWH,    "Commercial Price 3
                MBEW-XLIFO,    "LIFO/FIFO revelant
                MBEW-MYPOL,    "Pool no for LIFO
                MARC-MMSTA,    "Plant specific material status
                MARC-AUSME,    "Unit of issue
                MARC-QMATA,    "Material Authorization group
                MARA-RBNRM,    "Catalog Profile
                MARC-WEBAZ,    "Goods reciept processing time in days
                MARC-PRFRQ,    "Recurring Insepction
                MARC-SSQSS,    "QM Control key
                MARC-QZGTP,    "Certificate Type
                MARC-QSSYS.    "Required QM system for vendor
                INT_MAT-WERKS = MARC-WERKS.    "Plant
                INT_MAT-LGORT = MARD-LGORT.    "Storage Location
                INT_MAT-MTART = MARA-MTART.    "Material type
                INT_MAT-MATNR = MARA-MATNR.    "Material number
                INT_MAT-MAKTX = MAKT-MAKTX.    "Material description
                INT_MAT-MATKL = MARA-MATKL.    "Material group
                INT_MAT-MBRSH = MARA-MBRSH.    "Industry sector
                INT_MAT-MEINS = MARA-MEINS.    "Base unit of measure
                INT_MAT-GEWEI = MARA-GEWEI.    "Weight Unit
                INT_MAT-SPART = MARA-SPART.    "Division
                INT_MAT-EKGRP = MARC-EKGRP.    "Purchasing group
                INT_MAT-VPRSV = MBEW-VPRSV.    "Price control indicator
                INT_MAT-STPRS = MBEW-STPRS.    "Standard price
                INT_MAT-PEINH = MBEW-PEINH.    "Price unit
                INT_MAT-SPRAS = MAKT-SPRAS.    "Language key
                INT_MAT-BKLAS = MBEW-BKLAS.    "VALVATION CLASS
                INT_MAT-VERPR = MBEW-VERPR.    "MOVING price
                INT_MAT-BWTTY = MBEW-BWTTY.    "Valutaion Catogorey
                INT_MAT-MLAST = MBEW-MLAST.    "Price Determination
                INT_MAT-MLMAA = MBEW-MLMAA.    "Material Ledger
                INT_MAT-EKLAS = MBEW-EKLAS.    "Valuation class forS.O Stock
                INT_MAT-QKLAS = MBEW-QKLAS.    "Valutaion Class for Project
                INT_MAT-ZKPRS = MBEW-ZKPRS.    "Future Price
                INT_MAT-ZKDAT = MBEW-ZKDAT.    "Valid From Date
                INT_MAT-BWPRS = MBEW-BWPRS.    "Tax price 1
                INT_MAT-BWPS1 = MBEW-BWPS1.    "Tax price 2
                INT_MAT-VJBWS = MBEW-VJBWS.    "Tax price 3
                INT_MAT-ABWKZ = MBEW-ABWKZ.    "Devaluatin indicator
                INT_MAT-BWPRH = MBEW-BWPRH.    "Commercial price 1
                INT_MAT-BWPH1 = MBEW-BWPH1.    "Commercial price 2
                INT_MAT-VJBWH = MBEW-VJBWH.    "Commercial Price 3
                INT_MAT-XLIFO = MBEW-XLIFO.    "LIFO/FIFO revelant
                INT_MAT-MYPOL = MBEW-MYPOL.    "Pool no for LIFO
                INT_MAT-MMSTA = MARC-MMSTA.    "Plant specific material
                INT_MAT-AUSME = MARC-AUSME.    "Unit of issue
                INT_MAT-QMATA = MARC-QMATA.    "Material Authorization group
                INT_MAT-RBNRM = MARA-RBNRM.    "Catalog Profile
                INT_MAT-WEBAZ = MARC-WEBAZ.    "Goods reciept processing
                INT_MAT-PRFRQ = MARC-PRFRQ.    "Recurring Insepction
                INT_MAT-SSQSS = MARC-SSQSS.    "QM Control key
                INT_MAT-QZGTP = MARC-QZGTP.    "Certificate Type
                INT_MAT-QSSYS = MARC-QSSYS.    "Required QM system for
                APPEND INT_MAT.
                CLEAR  INT_MAT.
    ENDSELECT.
    ENDFORM.
    FORM DOWNLOAD_FILE.
    call function 'WS_DOWNLOAD'
      EXPORTING
        FILENAME                      = F_FILE
        FILETYPE                      = 'DAT'
      FILETYPE                      = 'WK1'
      tables
        data_tab                      = INT_MAT
      EXCEPTIONS
        FILE_OPEN_ERROR               = 1
        FILE_WRITE_ERROR              = 2
        INVALID_FILESIZE              = 3
        INVALID_TYPE                  = 4
        NO_BATCH                      = 5
        UNKNOWN_ERROR                 = 6
        INVALID_TABLE_WIDTH           = 7
        GUI_REFUSE_FILETRANSFER       = 8
        CUSTOMER_ERROR                = 9
        OTHERS                        = 10.
    IF SY-SUBRC = 0.
       FORMAT COLOR COL_GROUP.
       WRITE:/ 'Data Download Successfully to your local harddisk'.
       SKIP.
    ENDIF.
    ENDFORM.
    FORM UPLOAD_FILE.
    call function 'WS_UPLOAD'
      EXPORTING
        FILENAME                      = F_FILE
        FILETYPE                      = 'DAT'
      FILETYPE                      = 'WK1'
      tables
        data_tab                      = INT_MAT
      EXCEPTIONS
        FILE_OPEN_ERROR               = 1
        FILE_WRITE_ERROR              = 2
        INVALID_FILESIZE              = 3
        INVALID_TYPE                  = 4
        NO_BATCH                      = 5
        UNKNOWN_ERROR                 = 6
        INVALID_TABLE_WIDTH           = 7
        GUI_REFUSE_FILETRANSFER       = 8
        CUSTOMER_ERROR                = 9
        OTHERS                        = 10.
    IF SY-SUBRC = 0.
       FORMAT COLOR COL_GROUP.
       WRITE:/ 'Data Upload Successfully from your local harddisk'.
       SKIP.
    ENDIF.
    ENDFORM.
    FORM UPDATE_MM.
    LOOP AT INT_MAT.
    CALL FUNCTION 'CONVERSION_EXIT_MATN1_INPUT'
      EXPORTING
        INPUT              = INT_MAT-MATNR
    IMPORTING
       OUTPUT             = INT_MAT-MATNR
    EXCEPTIONS
      LENGTH_ERROR       = 1
      OTHERS             = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Header
        BAPI_HEAD-MATERIAL        = INT_MAT-MATNR.
        BAPI_HEAD-IND_SECTOR      = INT_MAT-MBRSH.
        BAPI_HEAD-MATL_TYPE       = INT_MAT-MTART.
        BAPI_HEAD-BASIC_VIEW      = 'X'.
        BAPI_HEAD-PURCHASE_VIEW   = 'X'.
        BAPI_HEAD-ACCOUNT_VIEW    = 'X'.
    Material Description
        REFRESH INT_MAKT.
        INT_MAKT-LANGU           = INT_MAT-SPRAS.
        INT_MAKT-MATL_DESC       = INT_MAT-MAKTX.
        APPEND INT_MAKT.
    Client Data - Basic
        BAPI_MARA1-MATL_GROUP     = INT_MAT-MATKL.
        BAPI_MARA1-BASE_UOM       = INT_MAT-MEINS.
        BAPI_MARA1-UNIT_OF_WT     = INT_MAT-GEWEI.
        BAPI_MARA1-DIVISION       = INT_MAT-SPART.
        BAPI_MARAX-MATL_GROUP = 'X'.
        BAPI_MARAX-BASE_UOM   = 'X'.
        BAPI_MARAX-UNIT_OF_WT = 'X'.
        BAPI_MARAX-DIVISION   = 'X'.
    Plant - Purchasing
        BAPI_MARC1-PLANT      = INT_MAT-WERKS.
        BAPI_MARC1-PUR_GROUP  = INT_MAT-EKGRP.
        BAPI_MARC1-PUR_STATUS = INT_MAT-MMSTA.
        BAPI_MARC1-ISSUE_UNIT = INT_MAT-AUSME.
        BAPI_MARC1-QM_AUTHGRP = INT_MAT-QMATA.
        BAPI_MARC1-GR_PR_TIME = INT_MAT-WEBAZ.
        BAPI_MARC1-INSP_INT   = INT_MAT-PRFRQ.
        BAPI_MARC1-CTRL_KEY   = INT_MAT-SSQSS.
        BAPI_MARC1-CERT_TYPE  = INT_MAT-QZGTP.
        BAPI_MARC1-QM_RGMTS   = INT_MAT-QSSYS.
        BAPI_MARCX-PLANT      = INT_MAT-WERKS.
        BAPI_MARCX-PUR_GROUP  = 'X'.
        BAPI_MARCX-PUR_STATUS = 'X'.
        BAPI_MARCX-ISSUE_UNIT = 'X'.
        BAPI_MARCX-QM_AUTHGRP = 'X'.
        BAPI_MARCX-GR_PR_TIME = 'X'.
        BAPI_MARCX-INSP_INT   = 'X'.
        BAPI_MARCX-CTRL_KEY   = 'X'.
        BAPI_MARCX-CERT_TYPE  = 'X'.
        BAPI_MARCX-QM_RGMTS   = 'X'.
    Accounting 1
        BAPI_MBEW1-VAL_AREA      = INT_MAT-WERKS.
        BAPI_MBEW1-PRICE_CTRL    = INT_MAT-VPRSV.
        BAPI_MBEW1-STD_PRICE     = INT_MAT-STPRS.
        BAPI_MBEW1-PRICE_UNIT    = INT_MAT-PEINH.
        BAPI_MBEW1-MOVING_PR     = INT_MAT-VERPR.
        BAPI_MBEW1-VAL_CLASS     = INT_MAT-BKLAS.
        BAPI_MBEW1-VAL_CAT       = INT_MAT-BWTTY.
        BAPI_MBEW1-ML_SETTLE     = INT_MAT-MLAST.
        BAPI_MBEW1-ML_ACTIVE     = INT_MAT-MLMAA.
        BAPI_MBEW1-VM_SO_STK     = INT_MAT-EKLAS.
        BAPI_MBEW1-VM_P_STOCK    = INT_MAT-QKLAS.
        BAPI_MBEW1-FUTURE_PR     = INT_MAT-ZKPRS.
        BAPI_MBEW1-VALID_FROM    = INT_MAT-ZKDAT.
    *ACCOUNTING 2
       BAPI_MBEW1-TAXPRICE_1    = INT_MAT-BWPRS.
       BAPI_MBEW1-TAXPRICE_2    = INT_MAT-BWPS1.
       BAPI_MBEW1-TAXPRICE_3    = INT_MAT-VJBWS.
       BAPI_MBEW1-DEVAL_IND     = INT_MAT-ABWKZ.
       BAPI_MBEW1-COMMPRICE1    = INT_MAT-BWPRH.
       BAPI_MBEW1-COMMPRICE2    = INT_MAT-BWPH1.
       BAPI_MBEW1-COMMPRICE3    = INT_MAT-VJBWH.
       BAPI_MBEW1-LIFO_FIFO     = INT_MAT-XLIFO.
       BAPI_MBEW1-POOLNUMBER    = INT_MAT-MYPOL.
        BAPI_MBEWX-VAL_AREA   = INT_MAT-WERKS.
        BAPI_MBEWX-PRICE_CTRL = 'X'.
        BAPI_MBEWX-STD_PRICE  = 'X'.
        BAPI_MBEWX-PRICE_UNIT = 'X'.
        BAPI_MBEWX-MOVING_PR =  'X'.
        BAPI_MBEWX-VAL_CLASS =  'X'.
        BAPI_MBEWX-VAL_CAT       = 'x'.
        BAPI_MBEWX-ML_SETTLE     = 'X'.
        BAPI_MBEWX-ML_ACTIVE     = 'X'.
        BAPI_MBEWX-VM_SO_STK     = 'X'.
        BAPI_MBEWX-VM_P_STOCK    = 'X'.
        BAPI_MBEWX-FUTURE_PR     = 'X'.
        BAPI_MBEWX-VALID_FROM    = 'X'.
       BAPI_MBEWX-TAXPRICE_1    = 'X'.
       BAPI_MBEWX-TAXPRICE_2    = 'X'.
       BAPI_MBEWX-TAXPRICE_3    = 'X'.
       BAPI_MBEWX-DEVAL_IND     = 'X'.
       BAPI_MBEWX-COMMPRICE1    = 'X'.
       BAPI_MBEWX-COMMPRICE2    = 'X'.
       BAPI_MBEWX-COMMPRICE3    = 'X'.
       BAPI_MBEWX-LIFO_FIFO     = 'X'.
       BAPI_MBEWX-POOLNUMBER    = 'X'.
    *Storage Locations
        BAPI_MARD1-PLANT      = INT_MAT-WERKS.
        BAPI_MARD1-STGE_LOC   = INT_MAT-LGORT.
        BAPI_MARDX-PLANT      = INT_MAT-WERKS.
        BAPI_MARDX-STGE_LOC   = INT_MAT-LGORT.
       WRITE:/ BAPI_HEAD-MATERIAL, BAPI_MARC1-PLANT ,BAPI_MARD1-STGE_LOC.
        call function 'BAPI_MATERIAL_SAVEDATA'
          exporting
            HEADDATA                   = BAPI_HEAD
            CLIENTDATA                 = BAPI_MARA1
            CLIENTDATAX                = BAPI_MARAX
            PLANTDATA                  = BAPI_MARC1
            PLANTDATAX                 = BAPI_MARCX
          FORECASTPARAMETERS         =
          FORECASTPARAMETERSX        =
          PLANNINGDATA               =
          PLANNINGDATAX              =
    <b>      STORAGELOCATIONDATA        =  BAPI_MARD1
           STORAGELOCATIONDATAX       =  BAPI_MARDX</b>
            VALUATIONDATA              = BAPI_MBEW1
            VALUATIONDATAX             = BAPI_MBEWX
          WAREHOUSENUMBERDATA        =
          WAREHOUSENUMBERDATAX       =
          SALESDATA                  = BAPI_MVKE1
          SALESDATAX                 = BAPI_MVKEX
          STORAGETYPEDATA            =
          STORAGETYPEDATAX           =
          IMPORTING
            RETURN                     = BAPI_RETURN
          TABLES
            MATERIALDESCRIPTION        = INT_MAKT
          UNITSOFMEASURE             =
          UNITSOFMEASUREX            =
          INTERNATIONALARTNOS        =
          MATERIALLONGTEXT           =
          TAXCLASSIFICATIONS         =
          RETURNMESSAGES             =
          PRTDATA                    =
          PRTDATAX                   =
          EXTENSIONIN                =
          EXTENSIONINX               =
    IF BAPI_RETURN-TYPE = 'E'.
       WRITE:/ 'Error Message ', BAPI_RETURN-MESSAGE.
    ENDIF.
    ENDLOOP.
    ENDFORM.
    <b>i am using this bapi method to copy materials from one plant to another plant using storage location so here what happenig is everyting is going correct but only the storage location data is not saving in table mard so any body faced this kind of problem please tell me.... and one more dbt
    bapi_marcx-pur_status = 'x' what is 'X' here??? is that mandatory field or required field ???
    points wil be rewarded.
    reagrds,
    sunil k airam.

    In the HEADDATA structure, STORAGE_VIEW should also be set as 'X' , in order to update storage location data
    for example
    BAPI_HEAD-STORAGE_VIEW = 'X'.
    Also, PUR_STATUS corresponds to field MARA-MSTAE whose domain has value table T141, therefore values in the field are checked against T141
    Edited by: Harris Veziris on May 12, 2008 12:37 PM

  • Settlement Receiver Value not Saved in Table Control Program

    Hi,
    I have Table control program regarding to Equipment Log, where in output it show the Equipment details with Account assignment category, General settlement receiver, Shift Hours, Work Hours, Idle Hrs, Maint. Hrs., Production Hours etc...
    In report, we have a formula i.e.
    Shift Hrs. = Work Hours + Idle Hrs + Maint. Hrs. + Production Hours.
    and all those fields are linked to each other.
    If we want that Work Hours should be 0, then msg showing - Working Hrs. should be entered. , means without enter Working Hrs. value we cann't save it.
    Now we removed the link of Working Hrs to others, means if we insert value 0 of Working Hrs., no msg showing. BUT Problem is this after remove this link, General settlement receiver value should not be saved.
    We want Work Hrs. as 0 value and General settlement receiver value must not be BLANK. It should be Saved.
    Plz guide..

    hi
    write a if statement after the Shift Hrs. = Work Hours + Idle Hrs + Maint. Hrs. + Production Hours.
    if work hours = 0, message i000 with 'Working Hrs. should be entered'.
    else ,write:/ shift hrs.end if. try to create a button for save when you click data will be saved or create a subrountine perform shift hrs than use if loop and select form end form inside keep Shift Hrs. = Work Hours + Idle Hrs + Maint. Hrs. + Production Hours.
    thanking you

  • Table maintenance generator is not saving entries.

    Hi All,
    I am facing problem in table maintenance generator.
    I created a table maintenance for Z-Table.
    In my table last 2 fields are a checkbox.
    When we go to Sm30 and check/uncheck the boxes then save , message comes tht data saved , but when we come out and go back to maintenance generator , it's not saved.
    while table maintenance in 2 step , then on detail screen it is working perfectly but on primary screen it's not.
    when TM is single step , it's show entries saved but not saving in data.
    I tried to delete and regenerate table maintenance but still not working .
    Please guide me to ractify this.
    Thanks in advance,
    Ashish Gautam

    Hello Friend,
    Check with th etechnical settings of the ztable:
    see if your buffereing is allowed, and log data chnages is checked.
    If so :
    Then select buffereing is not allowed and uncheck the Log Data Changes:
    Also go to TMG:
    Check if standard recording routine is selected, then select the no, or user recording routine.
    After making these changes, delete the TMG and create a new one once again. You can check it will work fine now.
    Thanks and regards,
    Uttam Agrawal
    [http://uttambpt.blogspot.com|http://uttambpt.blogspot.com]
    Edited by: uttamagrawal on Jan 31, 2011 12:42 PM

  • Bom item data - Document assignment not getting saved in table STPO

    Dear All,
                  As per out customer requirement, they want to display assigned drawing documents of Bom items in CS11. But it is not reflecting in cs11 eventhough we have assigned documents in Bom item detail overview Document assignment tab page. Moreover this is not getting saved in table STPO.
                   Waiting for solutions
    Thanks & Regards
    Dhananjay Kulkarni

    Please understand my customers requirement,
                               Presently they are assigning drawing document of each mat in material master. And if they want to see the drawing of each component of bom through Bom maintenance then they double click on component in bom, goes to mat master then additional data then document data and then drawing. In this way they need to open minimim 5 windows, which they want to make minimum 2 windows.
              In bom they are having more than 300 components. This is not possible to define document as component with item category D of so many components. One more idea I given to them is to club all drawings in one document and define that document as component with item category D, but in this way they can't identify  the individual drawing with part name.
              One more idea I given to them is to assign drawing document of individual component in item overview - Document assignment tab page from where they can open the drawing but it needs to open minimum 3 windows. So they are ready to assign drawing document in item overview - Document assignment tab page but they want, it should reflect in CS11 document column, from where they can easily open the drawing document.
              One more thing I observed that, assigned document to item overview - Document assignment tab page is not getting saved in Table STPO. I can't see this field content in STPO, which may be the reason that it is not reflecting in CS11.
             Is anything missing from Document management system?
    Please think and reply friends it's Urgent.
    Thanks & Warm Regards
    Dhananjay Kulkarni

  • Enhancement in IDOC_INPUT_ORDERS not saving changes after order creation

    I have an enhancement at the beginning of the IDOC_INPUT_ORDERS function module used to create sales orders via EDI.  In the enhancement, I take the data records and make some changes to some quantities and units of measure.  After making these changes, I let the function module continue on as normal.  The order does get created with my changes in them, however, the IDoc doesn't reflect my changes.
    Here's an example:  An EDI order comes in with 6 EAs of a material.  In my enhancement, I change it from 6 EAs to 2 3PK.  I then let it go on its way.  The order gets created fine with 2 3PKs, however the IDoc after its a ll done still says 6 EAs. 
    The enhancement runs before the FM puts the data into the tables it uses. I tried using the last user exit to open the IDoc and editing it there using the EDI_DOCUMENT_OPEN_FOR_EDIT FM but it says its open. 
    Can anyone give me any clues on how to make my changes stick to the IDoc?
    Thanks,
    Curtis

    Ok, I figured out why it's not saving.  Not realizing it, but the tables are passed into the FM by reference, so what I'm changing is only a copy.  So what I tried to do is use the 004 (I've also tried the 005) user exits to try to update the actual DB.  I used the following FMs (EDI_DOCUMENT_OPEN_FOR_EDIT, EDI_CHANGE_DATA_SEGMENTS, and EDI_DOCUMENT_CLOSE_EDIT).  The problem is that I can't change them because the IDoc is still open.
    Does anyone have any ideas on how I can achieve my goal of changing the IDoc?
    Thanks,
    Curtis

  • FACT SHEET Configuration not saving in transport to move to QA system

    hi Experts
    I am setting up the Account Fact Sheet BP_ACCOUNT_FS for my users and the only configuration that is saving is the configuration of the layout of the fact sheet to a transport.  The actual settings or configuration within the fact sheet is not saving.  For example, I used a BI report and added my query and parameter and while this saves in our development box, this will not save in the transport to move up through the systems.
    Any thoughts?  I already have a message open with SAP but checking to see if anyone has an immediate solution.
    Thanks,
    Chris

    Hi,
    P-table is an time independent attribute table ie it contains all the attribute info. in that table. so when u added a characteristic to that infoobject, u can find that entry in the P-table.
    Also M is a view on P & Q tables. It is not a table.
    T- ie Text table will contain only short,medium and long texts related to that info object.
    so when u add a characteristic  to infoobject it will be refelcted in P-table or Q- only. Not in Text tables.
    Narendra Reddy

  • Windows 7 (64bit) & Office 2010 (32bit) Excel 'Document not saved' over WAN to network drive

    Hi All
    We are currently in the process of upgrading all PC's on our WAN to windows 7 across multiple locations
    I know this has been asked numerous times but nothing is working for me.
    We are experiencing the dreaded 'Document not saved' error at only some locations (5 or 6 out of 200 for all users, these sites generally have slow network connections) when trying to save to a network share back at our HQ. it creates a .tmp file and leaves
    the original document intact but without the changes, changing the name of the document in save as doesn't work. saving locally and copying to the share works. We can save locally and to other onsite network shares. It constantly happens so the document can
    never be saved to that network share.
    Always worked on XP SP3 with Office 2010.
    the files in question are around 4mb. smaller excel files with no contenct do work.
    I have tried literally everything listed on all forums and nothing seems to resolve it...I've tried
    - the hotfix - doesn't apply to my enviroment and the offending KB aren't installed.
    - the network resiliency, pivot table network resiliency and Enable simply copy for UNC registry keys
    - disabling offline folders, windows search and indexing
    - disabling SMB2 on the client
    - turning off QOS on the IP4 settings.
    - trusted documents.
    event log gives
    Log Name:      OAlerts
    Source:        Microsoft Office 14 Alerts
    Date:          28/03/2014 18:47:23
    Event ID:      300
    Task Category: None
    Level:         Information
    Keywords:      Classic
    User:          N/A
    Description:
    Microsoft Excel
    Document not saved.
    P1: 100490
    P2: 14.0.7015.1000
    P3: xsmh
    P4: 0x80070040
    and numerous other things.
    My guess is me the issue points to Excel loosing connection to the network share when saving and then the .tmp becoming corrupt.
    Does any one have any ideas? Is there a way to sure the connection when saving? is there a way to force it to stay connected?
    any help highly appreciated.
    Thanks

    Hello, We've been having this same issue, and I think we have a work-around.
    If we change HKLM\System\CurrentControlSet\services\LanmanWorkstation\Parameters\RequireSecuritySignature from "0" to "1" we still get the error message but the tmp file is NOT created. If the user tries to save again, it is then successful.

  • CRM sales order is not saved in CRM but in ECC

    Hi,
    I am new CRM area and will not some hints on where to check.
    When the the Sales orders are successfully created in CRM, they are replicated to R/3 but the sales orders are not saved in CRMD_ORDERADM_H table of the CRM system.
    Also, I dont know see any details of the sales order in the interaction record document flow.
    Can you please help me with any hints on where to check to fix this issue..

    Hi Sangameshwar,
    In CRM you can have two scenarios for ERP Sales Order.
    1. ERP Sales offer and Sales order, using the CRM User Interface to create directly the ERP Sales Documents with LORD interface. The document is only saved in ERP. I believe this the scenario you are using.
    2. CRM Sales offer and Sales order, the document is saved both CRM and ERP. The documents are replicated via Middleware.
    In both scenarios the interaction record should add the document in the doc. flow, it's probably a missing customizing in the interaction record.
    Hope this information help you.
    Regards,
    Jorge G.

  • Data is not saving in to DB from POPUP screen.

    Hi,
    I am opening a popup screen on button click and On the popup screen, I have added the VO as form with submit button.
    On the popup fetchlistener, I calling a bean method to invoke the createInsert action as follows.
    public String createSubs() {
    System.out.println("Inside Action Event*********************");
    try{
    AdfFacesContext adf = AdfFacesContext.getCurrentInstance();
    BindingContainer bc = getBindings();
    oracle.binding.OperationBinding opb = bc.getOperationBinding("Create");
    opb.execute();
    }catch(Exception e){
    e.printStackTrace();
    return "";
    public BindingContainer getBindings() {
    return BindingContext.getCurrent().getCurrentBindingsEntry();
    When I am clicking on submit button in popup screen, data is appearing on the mainpage table but the same is not saving in the database. One more I have observed that doDML is not calling means SOP's are not comming from doDML method in the entity class.
    Please do the needful, its an urgent issue to reslove.
    Thanks in Advance,
    user5802014

    HI,
    Can you please specify that for your attributes CreatedBy and CreationDate , are you using automatic insert value from your entity or not? Or you are passing default values programatically in doDML() method.
    I guess for every new row your are using User name for CreatedBy field and current date for CreationDate field,
    Why don't you set these field at the time of creation of new row, Override Create() method in your entity bean and then you can set these fields to there default values. and now you should remove Mandatory property to unchecked for these fields in entity also.
    like i'm doing here - I'm setting sequence number as default to field insertedLineNo
        protected void create(AttributeList attributeList) {
            SequenceImpl seq = new SequenceImpl("NUMBER_SEQ", getDBTransaction());
            Number seqNum = seq.getSequenceNumber();
            setInsertedLineNo(seqNum);
            super.create(attributeList);
        }Hope this will help you, and let me know if this helps you.
    Fizzz...

  • Data is not saving in the variant

    i have written the below code for a push button on the application tool bar, i even assigned the org structure, it working fine.
    but when i create a variant, the field valuse in  the selection scrren are saving but the check box i have selected in the org. structure is not saving. but it is working fine in S_L9C_94000095  transaction.
    just check the code.
    DATA : r_orgun TYPE RANGE OF objec-objid.  
    SELECTION-SCREEN FUNCTION KEY 1. 
    NITIALIZATION.
      sscrfields-functxt_01 = ' Org.  Structure'. 
    AT SELECTION-SCREEN.
      IF sscrfields-ucomm = 'FC01'.    
        CALL FUNCTION 'RP_PNP_ORGSTRUCTURE'
          EXPORTING
            begda  = sy-datum
            endda  = sy-datum
            plvar  = '01'
          TABLES
            pobjid = r_orgun.
      ENDIF.
    regards
    Kumar M
    Edited by: Kumar M on Jan 27, 2009 6:38 AM

    None of them answered.

  • How to make the fields of BPM object not saved in database.

    Is it possible to declare some attributes of BPM object not saved in database.
    For example: Order has attribute orderId and date, user (other attributes)... we only want OBPM save orderId. We want the other attributes could be saved and retrieved by external DAO classes.
    We still want to use the OOTB presentation from BPM object (not the customer jsp).
    Thanks

    When you say:
    Is it possible to declare some attributes of BPM object not saved in database.do you mean you do not want the information stored in the Oracle BPM Engine's database?
    If this is the case, create a BPM Object with just two attributes. One would store your orderId as a primitive data type. The other attribute would be a BPM Object that would store all the other data you are going to retrieve from the external database.
    At the beginning of the screenflow, read the database using the orderId attribute and populate the other attribute (the BPM Object). At the end of the screenflow just before it flows to the end activity, you could set the second attribute (again, the BPM Object attribute) to null. This would keep the BPM object with the two attributes from storing anything but the orderId in the Engine's database table for the work item instance.
    Dan

  • AET Generated field values are not saved.

    Hi Gurus,
    I have created two AET fields on the screen (marked below) and that should store values in table CRMD_CUSTOMER_H. When I create a new service request and enter the values and save, AET field values are not saved. Again, when I edit the same service request and enter the values and save , AET field values are saved on the database.
    While  debugging  I found that, relationship BTHeaderCustExt does not exist for the first time and second time onward its appearing. Due to this, data is not being saved at first time (Line no 27 : current is empty).
    When tried to create realtionship using create_related_entity , it throwing exception cx_crm_genil_model_error.
    Please advice me the soution for the same.
    Regards,
    Anand

    there should be a context node at your view level. Please check ON NEW FOCUS method is implemented or not.
    If not, you can implement that method with below code.
        DATA: lv_collection TYPE REF TO if_bol_bo_col,
              entity        TYPE REF TO cl_crm_bol_entity.
    *   get collection of dependent nodes
        entity ?= focus_bo.
        TRY.
            lv_collection = entity->get_related_entities(
                   iv_relation_name = 'BTHeaderCustExt' ).
            IF lv_collection IS NOT BOUND or lv_collection->size( ) = 0.
              IF entity->is_changeable( ) = ABAP_TRUE.
                TRY.
                    entity = entity->create_related_entity(
                     iv_relation_name = 'BTHeaderCustExt' ).
                  CATCH cx_crm_genil_model_error cx_crm_genil_duplicate_rel.
    *               should never happen
                ENDTRY.
                IF entity IS BOUND.
                  CREATE OBJECT lv_collection TYPE cl_crm_bol_bo_col.
                  lv_collection->add( entity ).
                ENDIF.
              ENDIF.
            ENDIF.
          CATCH cx_crm_genil_model_error.
    *       should never happen
            EXIT.
          CATCH cx_sy_ref_is_initial.
        ENDTRY.
        me->set_collection( lv_collection ).

  • Template changes are not saved??

    Hi all I have a template with a table..
    I removed the borders for few columns and saved the template.
    When I reopened the template I still have borders...I removed the borders for like 10 times and also, saved the template with different names..STill the same issue.
    When I preview the output immediately after changing the borders, I see correct out put without borders.
    When I close and reopen the template, again I see borders...
    Please help me..
    Thanks!

    Hi,
    actually its not saving due to some problems in word.
    do as follow
    first open msword->create template save that in .rtf and ->remove border(select table in table properities select no borders)
    and then try i think it has to come.

  • ALV grid - not saving data withoutpressing 'Enter'.

    hi,
    I have an ALV grid (OO). I have written the code to update the final internal table in the method handle_data_changed.
    So If the user presses SAVE without hitting 'Enter' key, it is not saving the data .
    How can I handle this.
    Regards,
    Beena.

    hi,
    u can refresh it using method refresh_table_display.
    regards,
    janakiram.

Maybe you are looking for