Not to hide the report when after applying in the filter

Hi Experts,
I have created the two reports in one tab one is present year report and another one is previous year report,In this the present year is should Get view and previous year report used by collapsible (+) in css style i have given as display:none It is fine ..
But I need that If we select any filter in the Previous year report and giving Apply it should not get minimize.
Please give me a good solution for this task...
Thanks,
Raju

Aravind,
I agree with your answer,This will possible only when we have same table for the same section,but i am using two different table and two different sections.
For eg:If we change in the first filter it will get affect in the second filter.so only i used two different tables to get present year and previous year result in single tab.
Thanks,
Raju

Similar Messages

Photoshop CS5 already in 32-bit mode; Lighting Effects filter not showing in the Filter Menu

Photoshop CS5 already in 32-bit mode; Lighting Effects filter not showing in the FIlter Menu. Please help!?

Noel Carboni wrote:
Doesn't a Mac have a definitive way to check to see whether an application is running in 64 bit mode or 32? Some kind of process manager or something? 22 posts have gone by and the original poster doesn't yet seem convinced that it is actually running in 64 bit mode.
I don't know why there has been doubt since post #12 where I explained that Ps must be running in 64-bit mode when more than 2100 MB RAM is reported in Preferences.
Anyway, here's a screenshot of Activity Monitor showing CS6 in 64-bit mode and CS5.1 in 32-bit mode.

Why do I get an "X" when I apply an effect filter FCE?

When I apply an effect filter in FCE an big X appears on my clip. Is it something I am doing wrong or failed to do. I purchased my FCE direct from Apple about a year ago. I was under the impression that effects came with it, if I am mistaken please correct my thinking and provide me some guidance on what to do, if anything can be done at all. I may just be ignorant to this and I apologize for that.
Thank You

Effects do come with it. If an "x" happens when applying a filter, try trashing preferences:
http://fcpbook.com/Misc1.html

Using sum on webi report when breaks applied

Hello All,
I have a situation here and would like to get your help. I am using BO R2. I am working on a webi report where I have to apply breaks at different levels (to be precise, I applied at 4 columns on this report). I applied breaks and the results are looking good so far as the main table is sliced to many small tables based on the breaks. But, here comes the issue..
My report contains text as well as numerical columns. I have to do two types of calculations on these numerical columns.
1) When certain condition meets, like here I am working on when the data is from few particular projects, only their numrical columns should sum up and give the results. For example, after applying breaks, say my 200 rows table is sliced to many small tables and I am looking at one particular table that has 10 rows. As per my requirement, I have to pick the values of only 5 rows from this table (as the 5 projects I want are in this table), sum them up and display the results at the end of that table(Only for this table). The problem I am seeing here is, when I add a new row under the table, it is being added to all other sliced tables (which is because of break applied). But, I have to work on data only from one of the tables and that too on limited columns from that table. I do not want to touch other tables. Is this acheivable? Please let me know.
2) This issue is almost similar to the above one. I have three conditions like above to be applied on three different tables which pick only few rows of data and should sum them up. At the end, I need a brand new column all the way at the end of the report that totals up the numbers from only the above conditions' results(results from the 3 condition on 3 different tables).
Not sure if this can be done in webi R2 version. But, if it could be, then please let me know the way to do it. Also, let me know if my question is not clear.
Appreciate your help in advance.
Thanks,
Sandeep.

There seem to be several issues, one being more complex meaning "conditions" applied in the Block within breaks may be difficult to build in a Grand Total Row.
You can create an empty row to use with your Block at the bottom (in fact, once that is created you can create as many as you wish).
1) Remove all Breaks
2) Inset a Sum of one of the Metrics in the Block (doesn't have to make sense)
The inserted sum will create a row at the bottom of the Block. Make sure the new row with the sum does not have any Dimensions you want to Break on in it (it should not).
You can now create your formulas or variables for your Grand totals in that row and it will remain affixed to the table at the bottom. Apply your Breaks as you wish.
You can insert rows above or below that Brand Total row any time now. It is outside the breaks but is a part of the table and very flexible as to use.

Flickerring after applying auto levels filter

Don't have enough lighting on my clips. I added the auto levels filter and it looks great, but I notice lots of flickering when there is movement. The flickering did not exist before applying the filter. And when I apply the anti-flicker filter it doesn't seem to do much. Would a software like Avid be better at adding light to a clip? Is there something else I could do with Adobe Premiere CS3 to address this problem?
Thanks

Don't use Autolevels. You rarely get good results with the easy button
solution. Use Curves instead.

Data of measure is not seen in webi report when drill is disabled

Hi
i have created a hierarchy in universe on which i drill down in webi reports
the problem is that i have drilled my report till the last level and saved it
the object on which im drilling is set as a section in the report
so i have added a measure in the table under that section
now the measure has different value at different level of drillings
i.e for the last level of the drill i use one measure and after that as i drill up i use different measure
for all other level of drilling
every thing is working fine but the problem is
when i open report in view mode
the measure data is not seen
only when i enable drill the measure data is seen
i have done something like thi
i have used drillfilters in webi reports for checking which level we are in drill mode so as to display the measure value based on drill level

Seems like DrillFilters needs the drillmode to work fine..
why don't save the report with the drill button enabled?

Page Break does not work in PDF report when deployed to App Server

I have a report with a PAGE Break before on a repeating frame that holds a matrix report. In reports designer on the PC, the report correctly shows the page break. When deployed to the app server, the report shows the page after the break superimposed on top of the page before the break.
The report has a repeating frame that spans both pages and holds the header information (page 1), and the matrix report (page 2).
Any suggestions on how to fix this would be greatly appreciated.
Deb

Crystal Reports Designer 2008 and Business Objects Enterprise XI release 2 are not in the same suite release. You should use Crystal Reports Designer XI release 2 to connect BOE XIr2.

Can not start HTTP_server using "opmnctl startall" after applying p4505133

After I apply patch 4505133 on win32
10.1.0.5 PATCH SET FOR ORACLE DATABASE SERVER
I can not start HTTP_Server using opmnctl startall, got following error in apache log file:
[Thu Mar 22 22:43:54 2007] [error] (2)No such file or directory: mod_plsql: Please check your enviroment.\nORACLE_HOME is [C:\\OracleHomes\\oms10g]\nPATH is [C:\\OracleHomes\\oms10g\\bin;C:\\OracleHomes\\oms10g\\Perl\\5.6.1\\bin\\MSWin32-x86;C:\\OracleHomes\\oms10g\\Apache\\Apache\\fastcgi;C:\\OracleHomes\\oms10g\\opmn\\bin;C:\\OracleHomes\\oms10g\\opmn\\lib;C:\\OracleHomes\\oms10g\\opmn\\bin;C:\\OracleHomes\\oms10g\\opmn\\lib;C:\\OracleHomes\\oms10g\\bin;C:\\WINDOWS;C:\\WINDOWS\\system32]\nNLS_LANG is [Not Set]
[Thu Mar 22 22:44:00 2007] [crit] (2)No such file or directory: mod_plsql: Unable to initialize Oracle OCI
Any idea what is going on?
thanks,

Thanks for u r reply.
resolved this issue
oracle/middleware/oracle_idm1/bin
oidldapd folder is missing. so we copied the folder from trail environment and placed in above directory and started opmnctl services.
it worked.
Thanks and Regards,
sri485.

Patch Level not reflecting in Support Package Levels after applying

Hello,
MDM_TECH 555_700 patch 01 are applied to A65. But the patch is not
getting reflected in the package level.
We are still unable to view the component in OCS queue, even after
uploading the component. Still the MDM_TECH 555_700 is showing
the patch level 0.
Please provide any solution to make the patch level reflect.
Thanks & Regards
Vijay

Hi Chaitanya,
I'm facing the same issue. We are upgrading Solution Manager 7.0 to EHP1. I cannot implement the Notes 791984 , 1015068 and 1022755 since the OCS is locked with the error in DDIC_Activation. Could you please let me know how did you implement the corrections?
Cheers,
Savitha

LR 2.1 & 2.0 ~ DRAG & DROP not working correctly with photos when moving, applying keywords

Today this issue started, originally in 2.0, updated to 2.1 and issue continues.
Issue: DRAG & DROP feature with mouse (or pad on laptop) will select multiple photos, (with CTRL & SHIFT key as typical with Windows machines)but when I try to move them to a different folder, or drop them onto a keyword, it will not work.
Specifically, I select two photos to move to a different folder, the selection work, but when I try to "grab" the selected photos, Lightroom defaults to One Photo, and it will not grab it to move it. However, I can "right click" on the intended folder and can select "move selected photos to folder" and that works. This issue also applys to assigning keywords, and I would assume other similiar actions. I should note, that I can "rotate", assign "labels", "stars", and Keywords from Keyword sets, it just happens with the "Drag & Drop" feature.
Help
The feature works correctly in other Windows programs, so I'm sure it's related to Lightroom and not the mouse.
I have a Windows Vista machine, 3GB RAM 160GB HD, ~ 75% free space, AMD Turion X2 Dual Core 70 Processor. Everything has worked fine up until this morning.
Prior to upgrading to 2.1, I optimized my Catalogue. Everything seems to work fine except this feature.
Help

Drag by the actual image area of the thumbnail, not the surrounding 'fake slide' cell.
That's a feature of Lightroom's grid view. Clicking on image area of thumbnail keeps the multiple selection and makes the image clicked the primary select. Clicking on the outer thumbnail area deselects all but the active image.

Listdata.svc Feed not returning correct sort order when you apply multiple sort functions.

Hi,
Am using the listdata.svc to access and update Sharepoint list.
When i do the folowing query
listdata.svc/ModuleItems?$inlinecount=allpages&$filter=substringof(%2781514db7-b340-478d-cf4e-d4ac608822e8%27,ReferenceID)&$orderby=ContentType,Created%20desc&$top=250
It returns the results as if it was only filtering by the Created field and ignores the ContentType Filter.
Seems like a bug to me.

Hi Mitchell,
I made a test in my environment with the URL below and it sort for the both field.
https://xxx/_vti_bin/ListData.svc/List5?$select=Title,Test1&$orderby=Title,Test1
I suggest you create a simple rest url to query and sort item to test whether it works.
More information for your reference:
http://msdn.microsoft.com/en-us/library/ff798339.aspx
http://www.vinaysahni.com/best-practices-for-a-pragmatic-restful-api
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

Photoshop 7.0.0 freezes after applying a KPT3 filter.

If you apply any of the KPT3 filter effects (except for the Interform
filter), Photoshop 7 will lock up solid.
As a temporary (or even a permanent) workround you can use the keyboard to
save the image by doing a SAVE AS ([ctrl]+[shift]+S) or a SAVE A COPY AS
([ctrl]+[alt]+S) and save as either a TIFF or a BMP file. This will free up
Photoshop and you can continue working with your image.
If you are working with a layered image, it is important that you are saving
with the advanced TIFF format turned ON - saving as either a standard TIFF
or a BMP will flatten the saved image. However, the image which you have
open in Photoshop will retain its layers until you finally save it - and
then you can choose from the complete range of formats.
Carol
(posted from the UK)

Now that the dot release for Photoshop 7.0 has been released, this fixes the problem so the answer now is:
Update to PS 7.0.1 from the Adobe updates page on their web site:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=1851

I Published a report on the report server but it's not showing in the internal application we use to access reports

Hi,
I Published a report on the report server but it's not showing in the internal application we use to access reports. The name of the application we use is called MAMA and this application has access to all the reports on the SQL report server. My email is
[email protected] my cell phone number is 201-888-7952.
Thanks.

Hi Roger,
Based on my understanding, you publish a report on the report server. When you access reports with internal application, the report doesn’t display, right?
In your scenario, since you mentioned you have published the report to report server, please go to report manager, check if you can see the published report and open the report properly. If the published report is displayed on report manager, it should not
be the issue in Reporting Services. In this scenario, since the MAMA application has established connection with on report server, it may not update items on report server after you publish your report onto report server. So please try to “refresh” in MAMA
or reconnect the report server. If issue persists, I suggest you contact the MAMA application vendor to get some more effective advices.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

Condition not working in the query.

Hello Gurus,
When I apply a condition and select the characterisitc assignment as "All characteristics in the drilldown independently", the report is not showing any records. When I apply to one or more characteristics it displays records but the output is not desired. I need to apply to all characteristics.
please help me in this regard.
Thanks,
Aarthi

Hello,
Details about the option 'All Characteristics in Drilldown Independent'' :
http://help.sap.com/saphelp_nw70/helpdata/en/d5/94a340f590a35be10000000a1550b0/frameset.htm
This option generally work when you've got just one caracteristic.
the option 'Most Detailed Characteristic Along the Rows or Columns' doesn't work with the BEx Analyser.
So, You should use the last option 'Single Characteristics and Characteristic Combinations'...and you must select a combinaison of caracteristic which define a Key. (like a database).
These caracteristics must be display in your report...else your condition will have the status 'Variant' (and won't work).
This way work properly....

Not to hide the report when after applying in the filter

Similar Messages

Maybe you are looking for