Nota de serviços sem CFOP

PessoALL
É possível entrar com nota fiscal referente a serviços sem CFOP , para lançar notas , visto que essas notas não estão no escopo do Sped. Estou testando com o modelo de NF em branco mas mesmo assim o programa enxerga alguns registros e pede o CFOP na validação. CFOP este que não existe.
Ao passarmos o arquivo do Sped no validador, o validador reclama estas notas que não possuem CFOP. Além disso, estas notas não deveriam ser buscadas pelo programa visto que as notas de serviço não estão no escopo do Sped Fiscal

Bom dia Letícia,
Poderia abrir um chamado em SLL-NFE, exemplificando o caso complementar que você mencionou para que o desenvolvimento providencie correção.
Desde já agradeço.
Atenciosamente, Fernando Da Ró

Similar Messages

Can not refresh server manager Error:0x8007045b

OS: Windows 2012 R2 Core
Services: Hyper V
I was trying to remote reboot and the session hung. No worries I decided I could just reboot the next morning. So I rebooted the next day but when I go into server manager I get
an errror can not refresh server manager Error:0x8007045b. Did some research found suggestions to fix it using a DISM.exe /Online /Cleanup-image /Restorehealth.
But then I get an error 1115 A system Shutdown is in progress. I attempt to fix this issue using pskill winlogon but the issue pursistest. I have restarted the server several times now. Not sure how to fix this.
Thanks in advance,
Jake

Hi,
In addition to the above information,
Checkout the below thread for similar discussion,
http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
Regards,
Gopi
JiJi
Technologies

WebtopNaming - can not find server name for server ID

We have a LB, and web servers in front of OpenSSO app servers in our environment.
OpenSSO debug log CoreSystem fills up with lot of errors like these:
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
Sometimes, it even complains about a server id (07 in the following trace) which doesn't even exist in the Site Id Table.
There are no changes in the configuration. DNS is properly configured and all the servers and their connectivity are available. CoreSystem throws these errors even after a restart of opensso app servers.
Any ideas about the root cause?
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Server Id Table -> {%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF=iplanet-am-naming-samlassertionmanager-url, http://host4.company.com:8080/openSSO=04, com.iplanet.dpro.profile.agent.ProfileService=iplanet-am-naming-profile-class, %protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF=iplanet-am-naming-securitytokenmanager-url, %protocol://%host:%port%uri/authservice=iplanet-am-naming-auth-url, %protocol://%host:%port%uri/sts=sun-naming-sts-url, %protocol://%host:%port%uri/SAMLAwareServlet=iplanet-am-naming-samlawareservlet-url, http://host5.company.com:8080/openSSO=05, com.sun.identity.authentication.server.AuthXMLHandler=iplanet-am-naming-auth-class, com.sun.identity.policy.remote.PolicyRequestHandler=iplanet-am-naming-policy-class, %protocol://%host:%port%uri/loggingservice=iplanet-am-naming-logging-url, %protocol://%host:%port%uri/jaxrpc/=iplanet-am-naming-jaxrpc-url, %protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF=iplanet-am-naming-fsassertionmanager-url, %protocol://%host:%port%uri/identity/=sun-naming-idsvcs-rest-url, 03,05,04,02|03,01|03=iplanet-am-platform-site-id-list, %protocol://%host:%port%uri/identityservices/=sun-naming-idsvcs-jaxws-url, %protocol://%host:%port%uri/sts/mex=sun-naming-sts-mex-url, %protocol://%host:%port%uri/profileservice=iplanet-am-naming-profile-url, %protocol://%host:%port%uri/SAMLPOSTProfileServlet=iplanet-am-naming-samlpostservlet-url, 02|02,01|01,05|05,04|04=iplanet-am-platform-lb-cookie-value-list, %protocol://%host:%port%uri/SAMLSOAPReceiver=iplanet-am-naming-samlsoapreceiver-url, https://host4.company.com:8443/openSSO=01, com.sun.identity.log.service.LogService=iplanet-am-naming-logging-class, %protocol://%host:%port%uri/sessionservice=iplanet-am-naming-session-url, https://host5.company.com:8443/openSSO=02, %protocol://%host:%port%uri/policyservice=iplanet-am-naming-policy-url, iplanet-am-naming-service=serviceObjectClasses, com.iplanet.dpro.session.service.SessionRequestHandler=iplanet-am-naming-session-class, https://opensso-qa.company.com:443/openSSO=03}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Site Id Table -> {03=03, 02=03, 01=03, 05=05, 04=04}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Servers -> [https://opensso-qa.company.com:443/openSSO, https://host5.company.com:8443/openSSO, https://host4.company.com:8443/openSSO, http://host4.company.com:8080/openSSO, http://host5.company.com:8080/openSSO]
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Server IDs -> [03, 02, 01, 04, 05]
amNaming:05/13/2011 10:22:37:010 AM PST: Thread[WebContainer : 0,5,main]
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
at com.iplanet.services.naming.ServerEntryNotFoundException.<init>(ServerEntryNotFoundException.java:52)
at com.iplanet.services.naming.WebtopNaming.getServerFromID(WebtopNaming.java:709)
at com.iplanet.dpro.session.SessionID.setServerID(SessionID.java:380)
at com.iplanet.dpro.session.SessionID.parseSessionString(SessionID.java:363)
at com.iplanet.dpro.session.SessionID.getSessionServerID(SessionID.java:261)
at com.iplanet.dpro.session.service.SessionService.isLocalSite(SessionService.java:881)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:1197)
at com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:153)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:578)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)

Thank You for the response.
Here is my site configuration in OpenSSO:
There are 4 servers in the two opensso hosts (2 secure, 2 non secure)
Servers:
http://host4.company.com:8080/openSSO
http://host5.company.com:8080/openSSO
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
Only one site with secure URLs is configured
Sites:
site1
Primary URL: https://opensso-qa.company.com:443/openSSO
Assigned Servers:
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
From the CoreSystem log, Server ID definitions are:
https://host4.company.com:8443/openSSO=01
https://host5.company.com:8443/openSSO=02
https://opensso-qa.company.com:443/openSSO=03
http://host4.company.com:8080/openSSO=04
http://host5.company.com:8080/openSSO=05
Sometimes it throws an exception with existing server IDs. But sometimes it also complains about non existing server IDs.

When I try to use Safari I get an error message that states it can not find server Xn--%20%20-1ia0eb092a

When I try to use safari I get a message that states can not find server Xn--%20%20-1ia0eb092a

It sounds like you've got a messed-up homepage. Click the Safari menu, click Preferences, and under "Home page", re-type the page you'd prefer to load when Safari starts (eg "nytimes.com" or whatever). Close preferences and try again.
Matt

Certificate error connecting to VPN, can not validate server

Used the configuration utility to configure a profile for VPN using certificate as authentication. Keep getting error, can not validate server. When I export the cert to my desktop, I see the CRL information in it. When I view the details of the cert after installing on the iPad, I don't see any CRL information. I'm guessing this may be the problem only not sure how to resolve it.

solved the problem by adding an additional attribute in the certificate request to the VPN server (cisco router) and first enable the server SubjectAltName CA
In CA server:
certutil -setreg policy\EditFlags +EDITF_ATTRIBUTESUBJECTALTNAME2
certutil -setreg policy\SubjectAltName enabled
certutil -setreg policy\SubjectAltName2 enabled
net stop certsvc
net start certsvc
In certificate request for VPN server:
In the Attributes box, type the desired SAN attributes. SAN attributes take the following form:
san:dns=dns.name[&dns=dns.name]/san:ipaddress=x.x.x.x
(external dns/ip)
http://support.microsoft.com/kb/931351

Can not find server

hi,
i have installed coldfusion 6.1 standard version on my
machine with built in server. it works fine on my machine having
port 8500. when i execute
http://xxx.xxx.0.20:8500 on my
machine it display me coldfusion root directory. here xxx.xxx.0.20
is my machine ip address. but when same i execute from other
machine it gives me error "Could not fine server".
can anybody help me out to solve this issue.

hi,
i have problem with coldfusion server , i just have answer to
tell you that my machine doen't have problem with access from other
pc. i have told you that if any one access my pc using apache
server it works fine. and apache is running on port 81.
now problem is that my coldfusion is not working on other pc
same as apache. coldfusion i have installed using built in server
so for coldfusion i am not using any other server. i have used
apache for my other purpose. there is no consern of apache with
coldfusion.
i am telling that if any one execute any page from my pc
using apache say "http"//111.112.0.21:81/temp/t.php" it works fine.
but suppose any one execute coldfusion say "
http://111.112.0.21:8500/temp/t.htm"
it says that cannot find server.

How to delete email from iPhone ONLY and not from server?

Hi. I have a Yahoo! POP mail account.. Can anyone advise me how to setup my iPhone so it ONLY deletes email from the iPhone and NOT the server. So, after I read an email on the iPhone and delete it, the email remains in the INBOX on the server? If not, I will send a feedback to Apple. BTW - I can dl and send email just fine. Thank you.

ampullae,
When you setup Yahoo on the iPhone it defaults to IMAP because Yahoo offers free IMAP Push for iPhone users, as discussed in this article:
http://docs.info.apple.com/article.html?artnum=305882
If you add your Yahoo account as "other" it will be setup as POP.
With IMAP messages are stored on the server, and messages created in one email client, such as the iPhone, show up in the sent mailbox on both. In addition messages moved to a different folder on the iPhone, will be in a different folder when you access your Yahoo mail via a web browser or another IMAP client. Likewise message you delete, will also be synchronized and deleted.
Hope this helps,
Nathan C.

Delete emails from iPhone 5 but not from server?

How do I delete emails from iPhone 5 but not from server?

If its a POP account try this:
Go to Settings>Mail, Contacts and Calendars
Tap on your mail account
Scroll to the bottom
Tap on Advanced
Tap on "Delete from server" and set it to "Never"

Can someone please help me figure out why I keep getting the "can not reach server" when I try to download the ebook? This is happening with Adobe Digital Editions.

When I try to download the ebook I bough, the Adobe Digital Reader shows the following message: "can not reach server". Can someone please help me with this?
TO be precise, it says "licensee server communication problem"
Thank you

The thread running through your explanation has to do with connectivity to your server. (iCloud out of the blue asking for password, unable to message your boyfriend, unable to access e-mail). You said that you boyfriend restart his device and then the two of you were able to then imessage. My best advice for you would be to go to settings to reset to reset network settings. Once this has been done you then will need to enter the name and password of your wifi. ONce this is done you then can attempt to check to see that all passwords are enter correctly.
Good luck.

Win 7 Pro x64 Error 0x8007046a: Not enough server storage is available to process this command.

I installed Win 7 Pro x64 on a reasonably decent machine (Nvidia nForce 680i SLI, core 2 duo, 4 gig ram). It was a clean install on a freshly formatted partition. While copying a large bunch of files from another machine on the LAN, I get "Error 0x8007046a: Not enough server storage is available to process this command." It does give me the option to retry and continue, but the error inevitably pops up again later during the copy. Googling the error, I found a reference to it, suggesting I go to the registry and increase the IRPStackSize (but this article was not specific to Win 7). I tried increasing it as high as 32 hex. This reduces the frequency of the error, but does not eliminate it completely. Also, I now see a new error sometimes that says, "Too many files are currently in use. Quit one or more programs and then try again." That's odd, because I don't have anything else running. I haven't seen these errors when copying files to different partitions on the machine, so I assume it's something to do with network.

Hi,
To troubleshoot the issue, please try to do an In-Place Upgrade to repair the system.
1. Start the computer by using the current Operating System.
2. Insert the Windows 7 DVD in the computer's DVD drive.
3. Use one of the following procedures, as appropriate:
If Windows automatically detects the DVD, the Install now screen appears. Click Install now.
If Windows does not automatically detect the DVD, follow these steps:
a. Click the Start Button, type Drive:\setup.exe in the start search box and then click OK.
Note: Drive is the drive letter of the computer's DVD drive.
b. Click Install now.
4. When you reach the "Which type of installation do you want?" screen, click Upgrade to upgrade the current operating system to Windows 7.
Thanks,
Novak

Slideshow works on local but not remote server?

Slideshow works on local but not remote server? The site is patriceclarkson.com.

When I compare your:
http://www.warpd.ca/SpryAssets/SpryWidget.js
to this one:
http://labs.adobe.com/technologies/spry/ui/includes/SpryWidget.js
I do not see the same file. Try uploading the correct file and check again.
Xav

RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'

Hi, All
the system is PI 7.0 EHP1 oraclei Win2003 server, I configured SLD but I run RZ70, having error "RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA' ". I know there are lot of tread about this error, but none of themsolve my problem. all JCO, RFC connections and SDL DATA supplier(VA) seem OK. error message in SM21 is "Could not send SLD data"
detail from SM21
The system could not send the data that has been collected automatical
for the System Landscape Directory (SLD). Check whether the gateway
configured in transaction RZ70 has been started and whether the SLD
bridge has been registered with this gateway.
You can use transaction SM59 to check this in the sending system for t
implemented RFC destinations. The RFC destinations have the standard
names "SLD_UC" for Unicode sending systems and "SLD_NUC" for non-Unico
sending systems. If a different RFC destination has been entered in
RZ70, check this destination instead.
You can use the Gateway Monitor to check the target gateways. In ABAP
systems, this monitor is started with transaction SMGW, or you can use
the external SAP program "gwmon". Check whether the specified gateway
has an active registration.
OF COURSE I checked RFC of SLD_UC and SMGW
any different ideas
Regards
ABH

Hi
Please check the following notes are implemented
Note 906454
Note 907729
You may be aware but if you are not --->RZ70 creates the required SLD* RFCs during runtime - therefore if you have defined these RFCs manually first using the same namespace you can get RFC conflicts which result in a failed submission
Please also check the user in the RFC is known to both systems and has required authorization to write to SLD
Generally with SLD you have to install or select a suitable gateway to handle incoming data supply traffic
Also the gateway you are using has be known to SLD and reflected in RZ70 - i.e these defintions have to be the same
It is also recommended to delete all references to SLD_* RFCs in data supplier and target SLD
after a failed submission attempt to allow RZ70 to recreate these consistently once the above has been checked
Best wishes
Stuart

Using Server Admin with Leopard 10.5 (not the server version)

I have recently downloaded the Server Admin and would like to use the xgrid function. I am running Leopard 10.5 (not the server version). Is it possible to set up a server functions to use just xgrid with Server Admin and the Leopard 10.5 non server version system software. I want to set up a really small computer cluster between my macbook and imac. My problem is that I cannot seem to get a server started so I can select which functions I want to turn on (such as the xgrid). Thanks in advance for any suggestions.

I tried several options from the link you suggested, by the xgrid lite seems to be for 10.4 Tiger. I have not been able to make it work for Leopard. Any suggestions?

My SAP MMC is not showing server instance01

Hello Experts,
My SAP MMC is not showing server instance01.
I am running Netweaver 2004s SP17.
It was working fine earlier, and after a system reboot, I tried to start the server again, but MMC does not show server instance in NSP node.
I had tried starting the server from Administrative tools->Services   SAPNSP_01
but, its not starting and showing and message as
       Could not start the SAPNSP_01 service on Local Computer.
       Error 5: Access is denied.
where as SAPNSP_00 in Administrative tools->Services started and showing that in MMC console also.
Is there a way for me to fix this?
Regards
Sunil

I managed to fix the problem - I ran sapstartsrv.exe from windows explorer (located in \usr\sap\NSP\DVEBMGS00\exe)
Here I entered the following:
Operation: -Install Service and register COM interface & Start Service
SID: NSP
NR: 00
Start Profile: C:\usr\sap\NSP\SYS\profile\START_DVEBMGS00_<ServerName> (where <ServerName> is your computer name)
User: <ServerName>\<UserName> (where <ServerName> is your computer name, and <UserName> is your windows login name)
Password: windows login password
Startup Type: Automatic

Not enough server storage is available to process this command

Windows XP Pro x32 Connecting to Windows 8.1 Pro x64
I am trying to map a share on a Windows 8.1 Pro x64 machine (Surface Pro 3 512GB) to a drive letter on a Windows XP Pro x32 machine. I get an error saying:
Not enough server storage is available to process this command
I did a search and found:
http://support.microsoft.com/en-us/kb/106167
which says to increase (or set if it doesn't exist) the value of IRPStackSize in:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters
Since the item didn't exist I created it and set it to 0xC (the maximum recommended value).
I then rebooted the Surface Pro 3 (Windows 8.1 Pro).
When I tried to map the share again I got the same error message.
Is this a Windows XP problem or a Windows 8.1 problem? In either case how do I get around it?
Please do not respond with a suggestion to upgrad the Windows XP machine. It is running software and accessing hardware that will not work with a later version of Windows.
http://www.saberman.com
Edit:
It appears to only be a problem in access shares on USB attached drives. There is no problem in access shares on the Surface Pro 3's C: drive. Is this a known problem?

>Have you tried to map the drive from the Windows 8.1 to the Windows 7 machine ?
Yes and it worked before I created IRPStackSize in the Windows 8.1 registry.
I increased IRPStackSize on the Windows 8.1 machine to decimal 50 and was able to map the Windows 8.1 share onto my Windows XP machine.
I noticed that the article at the link:
http://support.microsoft.com/en-us/kb/106167 said.
Note Values may range from 0x1 to 0xC. These values are equivalent to 1 to 12 in decimal notation.
There is an article at:
http://support.microsoft.com/en-us/kb/285089 that said:
The default value of the IRPStackSize parameter is 15. The range is from 11 (0xb hexadecimal) through 50 (0x32 hexadecimal).
Whereas the article at the external site said to keep making it larger until it works.
BTW, my Windows 7 and Windows XP machines have MSE for proctection. Windows 8.1 has Windows Defender. No third party software.
http://www.saberman.com

Nota de serviços sem CFOP

Similar Messages

Maybe you are looking for