Note 918236

Hi, i am new on this,
The user indicates "We have a issue with printing of Web dynpro ABAP ALV reports"
They are asking in implementing the note 918236
can someone of you explain me how to do the manual work for the note 918236, thanks in advance.

Hi,
Please go to Solutions : and check the RFCs as stated. you need not to apply any correction instruction, just follow what is recommended in the note.
Hope this helps.
Thanks,
Shobhit garg

Similar Messages

Communication failure : RFC Destination SALV_WD_EXPORT_PDF does not exist

Hi Experts,
I have one standard ALV report in ABAP Webdynpro.
When i try to print the ALV Report it gives Communication failure : RFC Destination SALV_WD_EXPORT_PDF does not exist.
Can you give solution for this one.
Regards,
Sri

Hi Sri
Please go through this..
/people/bv.pillai/blog/2007/01/09/webdynpro-abap-alv-print-versionpdf
also Have a look this note SAP NOTE 918236; you will need help from basis.
Cheers,
Kris.

Error in Using Print Version on Standard Report

Hi Experts,
I am working on Governance risk compliance and on clicking 'Print Version' on output of a report, sytem is giving the following error:
Print version System Failure: call FM SALV_WD_EXPORT_PDF to ProgId ssrchgrc_PORT
I have checked the entire configuration as specified in SAP Note : 918236.
Please help.
Thank you
Depesh

Hi Depesh
Did you solve this issue? If so are you able to advise what was done to fix the issue.
I am also having a similar issue. It works OK on our development systems but on our UAT systems we getr this message.
Thanks
Rajdeep Kumar

Print version about BORGR_C

My system is R3 46C.I want to output GR slip via WE03 condition type. The material document doesn't generate message after I post goods receipt via BORGR_C, I have created the condition record for the condition type. I check the access sequence about WE03, it consist of Transaction/event type, print version and print item. Transaction/event type is WE about GR, We can set the print version when we use transaction code MIGO. But I can not set the print version in BORGR_C. I check the setting via OMBR, but I canu2019t find the setting with
BORGR_C. So I want to know which print version the system use when I post goods receipt via BORGR_C. thank you!

Hi,
by default the Print Version button will be displayed on ALV. you may want to refer the code in method WDDOINIT method of standard application WDT_ALV.
regarding using this button - Once the Print Version button is displayed then click it. if everything is fine then you will be able to see PDF else error message will be displayed along with Display Help link. Just click it and follow the instuctions as per it.
It says, Note 918236 contains detailed information.
I hope this is useful for you.
Thanks,
Chandra

Show print version button on ALV

Hi gurus!
I need to show (and use) the Print Version standar button on my ALV component.
I have set l_table->if_salv_wd_std_functions~set_pdf_allowed( abap_true ) but nothing appears.
Any idea about it?
Regards

Hi,
by default the Print Version button will be displayed on ALV. you may want to refer the code in method WDDOINIT method of standard application WDT_ALV.
regarding using this button - Once the Print Version button is displayed then click it. if everything is fine then you will be able to see PDF else error message will be displayed along with Display Help link. Just click it and follow the instuctions as per it.
It says, Note 918236 contains detailed information.
I hope this is useful for you.
Thanks,
Chandra

Three movies I bought from iTunes this morning do not show up on the 1st Gen AppleTV.

I understand some file formats are not compatible with AppleTV (1st gen) but these films were purchased directly from iTunes. One would assume they are formatted properly to work on Apple equipment, yes? Previously purchased movies show up on the AppleTV just fine, so I'm not sure what's going with these three. They were from the $4.99 Sci Fi collection: Enemy Mine, Dune and Terminator 2. Oldies but goodies. The iMac, where the iTunes Library lives is used to stream the content to the AppleTV, and everything that is in my Library appears to be available for streaming, except these three films. Any advice?

I have now restored Factory Settings on the Apple TV. Looked promising until iTunes hangs everytime I tried to enter the podcast page of the sync options. And I get errors that my newest movies, created in Final Cut Pro X with the Share with 720p Apple Devices export settings are not compatible with Apple TV.
Unbelievable.

Not work tablet UI on Prestigio 5080 PRO tablet

I read that browser.ui.layout.tablet = "1" can fix this problem. But it not works. I can work only in pnone interface that is not good for my 8'' tablet.

Would it be possible for you to share the problematic pdf and OS information with us at [email protected] so that we may investigate?
Thanks,
Adobe Reader Team

Re: Column is not getting displayed in the BI report

Hello Gurus,
I have developed a BI report with more number of parameters.
Case 1:
When i run my report , I am able to see data for particular condition but one column doesn't show any thing. All the rows in the column are blank.
Case 2
I tried to put the blank column as parameter, The Program works with out displaying that column data.
I am not sure where it is going wrong. I tried running the code in toad and i am able to see the data.
I have checked the code, Parameter description, length, Template and data definition.
Please help.
Thanks,
Sreekanth

Hi ,
For that column did u changed any alias name in the query...
check ur template once by loading the xml data...
check that column form field that matches with the xml tag or not..
Thanks,
Ananth

Can not refresh view data in STRUST

I am using the JSP (STRUTS) for developing my App.
I get a list of contact. In bellow it, I make a link for each contacts.
When i view details of one contact. On click link below.
My pages:
listcontact.jsp
contactdetails.jsp
When i request a details of contact from list contact -> View successfull.
But when i refresh the contactdetails.jsp page. I got a message error:
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.7 logs.
I have to use:
response.setHeader("Cache-Control","no-store");
response.setHeader("Pragma","no-cache");
But can't refresh any way this page.
Plase show me the way to solve it.
Thanks
Vu Nguyen

hi,
Here are codes
listdata = new CompanyListData();
companyList = (ArrayList) session.getAttribute("datalist_company");
if (companyList == null)
companyList = (ArrayList) listdata.getCompanyList(datasource);
session.setAttribute("total", companyList.size()+ " companies");
session.setAttribute("datalist_company", companyList);
return (mapping.findForward("success"));
And for details:
if ((addressItem==null && companyName!=null)||(addressItem==null&& companyId!="0"))
addressData = new AddressDetailData();
addressItem = addressData.getAddressItem(datasource, companyId);
session.setAttribute("addressDetail", addressItem);
I got companyID by:
String companyId = request.getParameter("companyId");
return (mapping.findForward("success"));
Please gest the problems that.
Thanks,

If image file not exist in image path crystal report not open and give me exception error problem

Hi guys my code below show pictures for all employees
code is working but i have proplem
if image not exist in path
crystal report not open and give me exception error image file not exist in path
although the employee no found in database but if image not exist in path when loop crystal report will not open
how to ignore image files not exist in path and open report this is actually what i need
my code below as following
DataTable dt = new DataTable();
string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
using (SqlConnection con = new SqlConnection(connString))
con.Open();
SqlCommand cmd = new SqlCommand("ViewEmployeeNoRall", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
da.Fill(dt);
foreach (DataRow dr in dt.Rows)
FileStream fs = null;
fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + dr[0] + ".jpg", FileMode.Open);
BinaryReader br = new BinaryReader(fs);
byte[] imgbyte = new byte[fs.Length + 1];
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dr["Image"] = imgbyte;
fs.Dispose();
ReportDocument objRpt = new Reports.CrystalReportData2();
objRpt.SetDataSource(dt);
crystalReportViewer1.ReportSource = objRpt;
crystalReportViewer1.Refresh();
and exception error as below

First: I created a New Column ("Image") in a datatable of the dataset and change the DataType to System.Byte()
Second : Drag And drop this image Filed Where I want.
private void LoadReport()
frmCheckWeigher rpt = new frmCheckWeigher();
CryRe_DailyBatch report = new CryRe_DailyBatch();
DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter ta = new CheckWeigherReportViewer.DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter();
DataSet1.DataTable_DailyBatch1DataTable table = ta.GetData(clsLogs.strStartDate_rpt, clsLogs.strBatchno_Rpt, clsLogs.cmdeviceid); // Data from Database
DataTable dt = GetImageRow(table, "Footer.Jpg");
report.SetDataSource(dt);
crv1.ReportSource = report;
crv1.Refresh();
By this Function I merge My Image data into dataTable
private DataTable GetImageRow(DataTable dt, string ImageName)
try
FileStream fs;
BinaryReader br;
if (File.Exists(AppDomain.CurrentDomain.BaseDirectory + ImageName))
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
else
// if photo does not exist show the nophoto.jpg file
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
// initialise the binary reader from file streamobject
br = new BinaryReader(fs);
// define the byte array of filelength
byte[] imgbyte = new byte[fs.Length + 1];
// read the bytes from the binary reader
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dt.Rows[0]["Image"] = imgbyte;
br.Close();
// close the binary reader
fs.Close();
// close the file stream
catch (Exception ex)
// error handling
MessageBox.Show("Missing " + ImageName + "or nophoto.jpg in application folder");
return dt;
// Return Datatable After Image Row Insertion
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Apple Mini DVI to Video Adapter is not working. Please Help...

I bought an Apple Mini DVI to Video Adapter to connect my Macbook to a TV using normal video cable. When I connect the cable, my Laptop DIsplay gives a flickr once and then it shows nothing. I checked Display in the system preference where I don't get a secondary monitor option. My TV is panasonic and it's an old one. I work on Final Cut Pro and it's very very important to see my videos on a TV. What am I doing wrong with the connection? Anyone Please Please help...

Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
Dicko

Possible to see at a glance who has/has not viewed pdf via the 'Tracker'?

We are working on setting up procedures for Browser-based reviews. We were hoping we'd be able to see at-a-glance who had/had not viewed or sent back comments, and the date they sent them in the Tracker, but it seems to be just a list of who it was sent to originally. How do you know who has sent comments, other than manually scrolling through all the comments to see people's names?

Hi;
No, there isn't a way for you to see anything about who has saved progress.
Thanks,
Josh

I create a birthday calendar in iCal and then click on it in iphoto at the begining of the calendar project each year. Some how the birthday did not populate the photo calendar. Is there a way to add the birthday iCal calendar into the calendar project?

I created a birthday calendar to use in iphoto for calendar. When a new calendar project is started each year, I click on it in. Some how the birthday did not populate the photo calendar this year. The photo calendar is almost complete. Is there a way to add the birthday iCal calendar into the calendar project? I would prefer not to start over.

Hi,
If you first select the calendar on the left, so that its background is highlighted blue/grey, when you make a new events they should be added to that calendar.
Best wishes
John M

IPod not recognized by iTunes, Windows Vista prompts to format iPod drive

Hello,
I have IPod 80GB which I rarely use. Yesterday when I wanted to use it, I went to add a few new audios to it, connected to my computer and launched iTunes. I added the folder which contained audios to iPod, synced it and wanted to disconnect, but iTunes took excepionally long to finish.
When I clicked on 'eject' icon, I go a message saying 'some files are being accessed' or something like that. I waited for 5-10 minutes but it won't finish up, so I unplugged my iPod as I had to leave.
Later when I wanted to play, I noticed I had no audios in iPod at all.
Later when I got home, connected it again to computer, launched iTunes, but iTunes won't show iPod. A few minutes later, windows (Vista) prompted a message saying that it needs to format N: drive (which was iPod).
I tried diagnostics on tis site, restarted/reset iPod etc, but it didn't solve the problem. I removed and reinstalled iTunes as per instructions, still no use.
Then I called Apple support Canada and the guy on the phone said I need to pay to get support. He said he'd send me some documents via email which would solve the problem and hen I wouldn't have to pay. I gave him my email address, but so far I have recieved no emails from him. I have checked my spam and junk folders, just in case, but nothing there.
Anyhow, this issue came up all of a sudden, there has been no physical damage to iPod, I barely use it. maybe for few minutes here and there a month. I have had numerous problems in the past every time a new iTunes update come, it always creates problems. Last year I spent many hours after iTunes update make iPod unrecognizable so I had to go back to older version, then upgrade etc. I don't remember how I solved the issue, but it took a while and it turned out to be something of iTunes version issue.
I wonder if this is another of such issue. I hope its not a hardware issue with iPod. I'd appreciate any help.
Thanks

I just got Vista too and it does recognize my ipod, but itunes can't find a lot of my songs on the computer. I tried to uninstall itunes and reinstall it thinking that it would seach for new music when I installed it again but nothing new happened when I did that.

Note 918236

Similar Messages

Maybe you are looking for