Note exceeded memory limit, deleted

We were entering a long entry in Apple Notes and included photos. At some point an error message popped up to the effect of "This note exceeded its memory limit ". After clicking Okay, the note vanished. No copy was found on other devices, all lost.
This is unacceptable. Is this a new limitation or bug?
If this is to be expected, what alternatives should we use to take notes with photos?

Thanks Volker, I must admit I didn't quite understand note 808607's line:
"If you require more memory in PRIV mode, you must insert a line of the type
as4/MAXSHR64 = 400
in the SAP instance profile."
I don't think I want more memory in PRIV mode.
However, I am sure you are right and I'm relieved to know that I am in fact not constrained to 64GB.
So, I believe I should go for:
as4/MAXSHR64 = 800       (allow max 200GB)
em/blocksize_KB = 8192  
em/initial_size_MB=65536 (for example)
to take me up to the full 64GB.
I don't need to do this yet, but at least now I am prepared and can prove this in QA.
Many thanks for the advice, I clearly need to re-read and digest note  808607 - it has not been at all clear to me. Perhaps the German version is clearer.
Andy.

Similar Messages

  • I used the iTunes match workaround and now want to start over, but I am being told I have exceeded the limit even though I completely cleared the match cloud, mindful of the 1000-delete-at-a-time limit....what should I do?

    I have over 25k songs in iTunes. I originally tried the "create a second library" solution. I reduced to less than 25k songs and successfully ran iTunes match. Then I discovered the limitations of the second library solution regarding adding more music, managing playlists, and turning back on my main library and being greeted with all sorts of problems.
    So, I created a blank library, ran iTunes match, and its showed me all of my files in the cloud that had been matched or uploaded. I deleted all of the files, mindful of the 1000 file limit per delete. I have confirmed I have now deleted them all. An iTunes match update says I have no files in the cloud. Perfect.
    I reduced my library again, this time using the superior method of just changing the files I do not want to match to voice memos. That is done. I have less than 25 k songs.
    I waited 2 days and ran match again. Yikes. It did not let me match or upload anything, and every music files's cloud status just says "exceeded limit," despite the fact that my cloud is devoid of music and I have no access to any music via match.
    I am in a limbo where I have nothing in the cloud from match, but I can't add anything because match says I exceeded my limit.
    I emailed customer support, and got back a useless email linking me to a very general article about iTunes match. I called customer service and they said this was something the iTunes store people would need to address, and they can only be contacted by email. Sigh . . . .
    Any thoughts?
    Thanks

    Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device?  If so, keep in mind that Apple's servers may be experiencing a heavy load right now.  They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

  • I can no longer access Bejeweled Blitz through my facebook account.  I get the message that says, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit".  Help please.

    I can no longer access Bejeweled Blitz through facebook.  I get the message, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit". I can access Bejeweled through FB using my husband's log in so to me that suggests the problem is with my log in. Help please.

    Contact FB or use another browser. 

  • Cannot retrieve my e-mail "browser sent request server could not understand. Size of request header field exceeds server limit"

    Upgraded to Firefox 5.0.1 yesterday. No, after logging on to firefox, which takes me to my comcast page and when I try to get
    my e-mail I get this message "your browser sent a request this server could not understand. Size of request header field exceeds server limit" Then it says something about "cookies" I also tried to connect to other sites and get similar messages. Just to let you know I am not a guru, and 80 years old, but I did not have this problem with the previous version. Question, why are the headers repeated? Could that be the problem???

    This issue can be caused by corrupted cookies.
    Clear the cache and the cookies from sites (e.g. comcast) that cause problems.
    "Clear the Cache":
    * Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Firefox > Preferences > Privacy > Cookies: "Show Cookies"

  • TS1702 When I Had To Do An Update For GarageBand On My IPad 2. I Had Not Enough Memory For a that App Update. So I Deleted It And When I Tried To Purchase It Again It Says Installing When It's not So I Cannot Purchase My GarageBand. PLEASE ANYONE HELP!

    When I had to do an update for GarageBand on my ipad2. I had not enough memory to instal the update. So I deleted the app and tried to install my app again but it says installing when it's not. So I can't purchase GarageBand ever again. PLEASE HELP!

    Hi Ben...almost the same issue...read mine...not sure yet if it is solvable !!!!

  • HT5731 My iPad says I cannot download any more because I am out of memory.  I purchased space in cloud and still get same message.  I do not know how to delete shows to open space.  Can you help?  Thanks.

    My iPad says I cannot download any more because I am out of memory.  I purchased space in cloud and still get same message.  I do not know how to delete shows to open space.  Can you help?  Thanks.

    Your iPad is physically out of storage space. Purchasing space in iCloud dosen't magically give your actual iPad more physical  storage space.
    You need to delete content off of your iPad.
    https://discussions.apple.com/thread/5122738?start=0&tstart=0
    http://m.youtube.com/watch?v=mZdBQoE37FA&desktop_uri=%2Fwatch%3Fv%3DmZdBQoE37FA

  • LabVIEW 2009 build memory usage exceeds Windows limit

    We have a large application that builds without problems using 8.6.1, but failed to build using LabVIEW 2009 with the error "Not enough memory to build this application".
    We solved the problem by adding the parameter /3GB to the Windows XP boot.ini file. This increases the available memory for a Windows XP application from 2Gb to 3Gb.
    It appears that LabVIEW 2009 uses more memory during the build process and, in our case, this took it over the 2Gb limit. 

    We are also facing the same problem...
    can National Instruments help us  ??????
    Following error is occuring while creating exe.
    "Build was unsuccessful
    An error occurred while saving the following file:
    D:\BIS_Main_2009_V3.XY\branches\BIS_Main_2009_V3.6​1_Trans\User Interface Panels\Inspection.vi
    Invoke Node in AB_Source_VI.lvclass:Close_Reference.vi->AB_Build.​lvclass:Copy_Files.vi->AB_Application.lvclass:Copy​_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.​lvclass:Build.vi->AB_Application.lvclass:Build.vi-​>AB_EXE.lvclass:Build.vi->AB_Build.lvclass:Build_f​rom_Wizard.vi->AB_UI_Frmwk_Build.lvclass:Build.vi-​>AB_UI_FRAMEWORK.vi->AB_Item_OnDoProperties.vi->AB​_Item_OnDoProperties.vi.ProxyCaller
    <APPEND>
    Method Name: <b>Save:Target Instrument</b>"
    Please suggest!!!

  • I keep getting a "Not enough storage to back-up my device" message since I upgraded to the new software. Short of purchasing more memory, and deleting some content, are there any other options?

    What are my options for increasing storage capacity besides purchasing more memory, or deleting existing content. The new software install used up much of my storage capacity and the message is driving me crazy. Any ideas?? Thanks!

    There are two kinds of storage messages that appewr on iOS devices. Your question seems at odds with your description so there might be some confusion here.
    If the storage refers to not enough for an icloud back up then you need to purchase more icloud space or turn off iCloud backup. You can backup using iTunes on your computer with paying for additional iCloud storage.
    if the storage refers to that on your iOS device as in there is not enough storage to update, then you have two options and neither option involves adding more storage since the amount of storage on an iOS devoce is fixed. One option is to delete stuff from your device to free up more space. The second option is to complete the update while your devoce is connected to your computer running the latest version of iTunes. When you do that the update is downloaded to your computer and extracted there so it doesn't require as much free space on your iOS device.

  • N70 - Not Enough Memory Delete some data first

    Hi,
    Could someone please help with a problem that i am having with N70. Messages Empty(All Folders) and no images or media files on the phone memory, al applications also are on the Memory card(1GB and 3/4th of it is free). But still i am getting this message of "Not Enough Memory to eprform the Operation. Delete some data first". Could someone please advise what i could do to resolve this, as now i do not have any log of Calls(missed, rec, dialled), no incoming messages etc.
    Thanks in advance.
    Regards,
    Powi

    first upgrade your phone software with the latest available version that you can check here:
    http://europe.nokia.com/A4577224
    if you have the latest software version,reset your phone by pressing *#7370# in standby mode(after backing up)
    NOKIA means:Night Of King In Alone

  • I am turned off completely with GarageBand..I did delete it and re installed but now it's claiming not enough memory, which I guess is a push for me to install more memory. I will do it but I will use garage band as my sou d board only while recordinelse'

    II am turned off completely with GarageBand..I did delete it and re installed but now it's claiming not enough memory, which I guess is a push for me to install more memory. I will do it but I will use garage band only  as my sound board only while recording on something else and the. I will delete it.. Real P I A....

    How do I upgrade the ram?
    The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a machine supposedly limited to 4 GB.
    Crucial
    Other World Computing
    Do a backup, preferably 2 separate ones on 2 separate drives.
    Revert to a Previous OS X - Yosemite
    Revert to Snow Leopard
    If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

  • Downloading itunes, I receive the error "there is not enough memory".  How do I fix the memory issue?

    When dowloadning tunes, I receive the error "there is not enough memory.  I've deleted tunes from my library & ipod and I still get the error. How do I get around this?

    It could be the newer version of iTunes requires more physical memory than your computer currently has available.
    Do a right click on "My computer" and check out your computers memory/RAM specifications.
    Windows XP is a bit bloated in the latest updates, trying to get people to upgrade to Windows 7, might be little room for other programs, especially one as huge as iTunes.
    If you finally do choose a new machine, I have some tips:
    For 3D gaming laptops, I wouldn't pick any graphics card scoring less than 1000 on this sites scale. Not scoring less than 2000 for towers.
    http://www.videocardbenchmark.net/high_end_gpus.html
    I would also choose a quad core processor scoring 5000 or better on this scale,  64 bit,  Windows 7 Pro (so you can virtualize your XP programs) or OS X, and 4GB of RAM expandable to at least 8GB or future proofing your investment.
    http://www.cpubenchmark.net/high_end_cpus.html
    I would also choose 7,200 RPM hard drives for both towers and laptops for performance. On laptops while using the battery, set the energy savings to stop the hard drive spinning when not in use. Only choose the slower 5,400 RPM drive option if your always on battery and need maximum life as you lose about 20% with the faster drive, but gain 20% or more in performance.
    Dual cores and 32 bit processors/OS with their 4GB RAM limit is soon to be old news.
    For laptops, I highly recommend anti-glare displays for maximum use in any environment.

  • Server has not enough memory for operation (Some .rpt files not removing from Temp folder )

    We have web application developed in ASP.NET 4.0 ftramework and published on IIS. And we are using 13_0_8 version of CR.
    I am creating report files and exporting these as pdf. And I am disposing streams and report documents at the end. Initially, there wasn't any problem and temporary files which are created by CrystalReport were deleting all. But, now requests to the web application increeased to about 50.000 in a day and now some .rpt files are staying in Temp folder and I can't delete them. After recycling application pool all files are removed by IIS. Then, after 1 or 2 hours new .rpt files are creating in Temp folder. And after somewhile, application throws Server has not enough memory for operation. And, IMHO the reason is temp files. Here is the code I am using to export report as pdf.
    Questions:
    1. Is the reason of this exception is temp files in Temp folder?
    2. What is wrong in that code?
    ReportDocument report = DownloadPDF.GetReport(id);
       MemoryStream stream = (MemoryStream)report.ExportToStream(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat);
       Response.ContentType = "application/pdf";
       Response.AddHeader("content-disposition", "attachment; filename=" + id+ ".pdf");
      report.Close();
      report.Dispose();
       try
       Response.BinaryWrite(stream.ToArray());
       Response.End();
       catch (Exception)
       finally
      stream.Flush();
      stream.Close();
      stream.Dispose();
    Here is the StackTrace

    Hi Farhad
    At 50,000 requests, you are more than likely running into the CR engine limit. E.g.; you're pushing way too hard... The following will be good reads for you:
    Crystal Reports 2008 Component Engine Scalability | SCN
    (The above doc does apply to current versions of CR - e.g.; no changes.)
    Crystal Reports Maximum Report Processing Jobs ... | SCN
    Scaling Crystal Reports for Visual Studio .NET
    Choosing the Right Business Objects SDK for Your Needs
    Choose the Right SDK for the Right Task
    How Can I Optimize Scalability?
    All of the above apply to your version of CR and thus the next question will be; how to proceed:
    1) Bigger, faster servers will not hurt.
    2) Web farms.
    How Do I Use Crystal Reports in a Web Farm or Web Garden?
    3) Crystal Reports Application Server, or perhaps even SAP BusinessObjects BI Platform 4.1
    Crystal Enterprise Report Application Server - Overview
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Oracle 9.2.0.8 on SUN M9000 Blade Server  Memory Limit

    Is there a 32Gb memory limit for Oracle v9.2.0.8 residing on an SUN M9000 Blade Server?
    We currently have an Oracle v9.2.0.8 installed on M9000 and whenever the database memory is increased, the database locks/ceases to function.
    The (verbal) history which I have about this database is there is a 32Gb Memory Limit for Oracle v9.2.0.8 database installed on an M9000. Can anyone confirm/assist?

    user4447247 wrote:
    Is there a 32Gb memory limit for Oracle v9.2.0.8 residing on an SUN M9000 Blade Server?Oracle does not care how much RAM is in the system.
    We currently have an Oracle v9.2.0.8 installed on M9000 and
    whenever the database memory is increased, post COPY & PASTE show what is changed to which value
    by default 32-bit SGA can not exceed about 1.7GB & never more than 4GB.
    the database locks/ceases to function.What clues exist within alert_SID.log file?
    What specific errors get throw?

  • Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit

    My core.log file keeps showing these errors everytime I start to stream. My streams are not viewable on PC's and only viewable on iOS devices.
    Is there something wrong with the libf4f.dll file? I'm using FMS 4.5 on Windows 2003 Server.
    2011-12-28    15:44:09    4020    (e)2611178    Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    -
    2011-12-28    15:44:09    4020    (e)2611423    Failed to record bbc2011-BBC73 (Unknown Error).    -
    2011-12-28    16:02:00    4020    (e)2611178    Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    -
    2011-12-28    16:02:00    4020    (e)2611423    Failed to record bbc2011-BBC71 (Unknown Error).    -
    2011-12-28    16:57:12    4020    (e)2611363    Server detected a backward timestamp from 5006873 to 0 in file: C:\FMSHOME\applications\livepkgr\streams\_definst_\bbc2011
    2011-12-28    17:18:21    4020    (e)2611178    Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    -
    2011-12-28    17:18:21    4020    (e)2611423    Failed to record bbc2011-BBC83 (Unknown Error).    -
    2011-12-28    17:36:12    4020    (e)2611178    Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    -
    2011-12-28    17:36:12    4020    (e)2611423    Failed to record bbc2011-BBC81 (Unknown Error).    -
    2011-12-28    18:38:09    4020    (e)2611363    Server detected a backward timestamp from 5420086 to 0 in file: C:\FMSHOME\applications\livepkgr\streams\_definst_\bbc2011-BBC82    -
    2011-12-28    19:12:44    4020    (e)2611178    Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    -
    2011-12-28    19:12:44    4020    (e)2611423    Failed to record bbc2011-BBC92 (Unknown Error).    -
    2011-12-28    19:23:38    4020    (e)2611178    Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    -
    2011-12-28    19:23:38    4020    (e)2611423    Failed to record bbc2011-BBC91 (Unknown Error).    -
    2011-12-28    20:41:50    4020    (e)2611363    Server detected a backward timestamp from 6390123 to 0 in file: C:\FMSHOME\applications\livepkgr\streams\_definst_\bbc2011-BBC93    -
    2011-12-28    21:12:05    4020    (e)2611178    Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    -
    2011-12-28    21:12:05    4020    (e)2611423    Failed to record bbc2011-BBC102 (Unknown Error).    -
    2011-12-28    22:49:23    4020    (i)2581247    Core (4020) disconnected from edge.    -
    2011-12-28    22:49:23    4020    (i)2581233    Core (4020) disconnecting from admin: 200.    -
    Thanks,
    Dave

    There is a concept of Absolute Time Code which enables the encoders to publish the livestream based on absolute system time rather than starting the messages from timestamp 0 everytime you append to a recording.
    I suspect you encoder is starting everytime from 0 timestamp but since the server already has recording till some time - say x, for the server these are backward timestamps and hence the continous warnings.
    Also to safeguard FMS against such conditions and cause memory crashes, we only allow messages with backward timestamps to accumulate in the process queue upto a limit and then the recording is stopped. Thats why you are observing the errors - 
    "Error from libf4f.dll: Total number of messages waiting to be recorded has exceeded the limit.    - 
    2011-12-28    19:23:38    4020    (e)2611423    Failed to record bbc2011-BBC91 (Unknown Error).    -"
    Try to check your encoder settings for stream synchronization or ATC settings and enable them.

  • ITunes Match exceeded 25k limit question

    Hi,
    My iTunes library exceeded 25k songs, and so I went through and deleted quite a lot of albums - when you right-click an album though, it doesn't ask you if you also want to delete the songs from iCloud - I think from experimenting that I should have selected the individual songs instead - however, I've taken my local library down to 24k now but it's still saying my iCloud exceeds the 25k limit.
    Any ideas on what I should do next - is there an option to manually manage my iCloud collection for instance?
    Thanks
    I'm on OS X 10.9.5, and the latest version of iTunes FWIW.

    Hi,
    This is a draft of a user tip I intend posting. Does it help?
    "iTunes match has a limit of 25k tracks for tracks matched or uploaded. iTunes purchases do not count towards this limit.
    Can you have iTunes match and an iTunes library with more than 25K?
    Yes but you need to manage your library so that you keep matched and uploaded tracks below 25k. With iCloud status column added to song view (go to menu > view > view options and tick appropriate box), you can tell what has been matched, uploaded, purchased, ineligible, duplicate or waiting. You can also have a "Removed" status. Such files are ignored when match scans your library.
    I achieved this by creating a second blank library - I signed into match and was able to view all tracks in iTunes Match. iTunes: How to open an alternate iTunes Library file or create a new one
    I then deleted some tracks from this library - effectively deleting tracks in the cloud. They were not deleted from you hard drive and will still appear in your original library. This method works well if you have a second computer on which your library only shows tracks in the cloud.
    When I went back into my original library, the iCloud status for those tracks were shown as "removed". iTunes Match will now ignore those tracks. You can now add new tracks provided you kept matched and uploaded to less than 25k. I keep a smart playlist any track with iCloud status = matched and any track with iCloud status.
    If you have exceeded the limit, the iCloud status will tell you so but even after you have deleted the excess tracks, you might still get this message. You may find that using the above method will fix the problem BUT i can not verify this. If you back up your library regularly to may be able to restore the iTunes library.itl from a time immediately before you first had exceeded limit problem."
    Jim

Maybe you are looking for