Note II will no longer sync email after software update

After I let the last major install update  I cannot sync my MS Exchange or yahoo accounts  both of which are critical for business.  I have set all the options for syncing  and tried different ways.  the message says cannot connect to server  but all my settings are the same as before the update. any ideas besides a hard reset as I do not want to lose data and apps. 

    We are sorry to hear that you are having issues with your email, pford4133. We can understand how important they are for business. You have done great troubleshooting, which we appreciate. We strongly encourage you to remove the battery and leave it out for a few minutes. Once that is done put back in and together. At that time please try and see if you can send yourself an email. Then we can see if it is able to be sent and received.
RobinD_VZW
Follow us on twitter @VZWSupport

Similar Messages

  • Trying to understand long sync time after 4 update :re blurry photos

    hi i wanted to take out the 1 photo album that was blurred/grainy after update and then re-install them so that they are optimized. however when i sync it is taking hours. the album in question has 800 photos in it, but it should delete right away. i have had to exit the sync several times.
    can anyone tell me first the steps to removing a photo album. so at least i am clear on that?
    and then im wondering if these long syncs are normal. i have very little data on the phone itself. before the update it was synching quick. i have windows 7 and itunes 9.2.
    thanks in advance.

    ok its optimizing. thanks again.
    thanks tamara. i will give that a shot. in order to do that do i have to select in the options "sync only checked songs and videos"? also does videos refer to photos as well?
    sorry i know im flatlining here, i appreciate the help.
    Message was edited by: Radium88

  • Missing emails after Software Update

    Hi all,
    I seem to missing a large chunk of emails in my Inbox after a recent Software Update. This is only in my Inbox. My Sent mail seems fine. Before the update, my Inbox had around 8000 emails. Now it hovers around 600.
    I looked at my Home>Library>Mail>Mailboxes folder. There, it says the size is 110 MB and was last modified on today's date. That tells me all 8000+ emails are still in there, but they just aren't being displayed. I tried Rebuilding the mailbox a while back, but that offered no solution.
    Any advice?
    Many thanks,
    Jon

    Try these directions
    http://support.apple.com/kb/TS1967
    Except in step 7, I recommend copy & pasting instead of dragging.

  • I can not get the phone to turn on after software update iphone 4s. it is showing the itunes and a cable, what should i do?

    I cannot getr my phone to turn on after a software update. it is only showing the itunes icon and a cable. What should I do /

    Hi patche,
    I would recommend you to connect the iPhone to iTunes and follow the steps provided,
    Once you connect the iPhone to iTunes you will be able to Set-up your iPhone on the iTunes itself with the available options.
    HOPE THIS RESOLVES THE ISSUE.
    Regards,
    Abhishek D.K

  • Help: Camera No Longer Works Properly after Software Update

    I can no longer use my blackberry camera outdoors. Even if I set the white balance to outdoors, the entire image is white. I used to be able to take brilliant, clear pictures outdoors in direct sunlight. I even used to be able to take pictures of the sky. Now, even on overcast days, all I get is a white mass of nothing.
    I'm really upset because I used to use the camera a lot.
    It's also really slow in moving from the camera app back to the main screen.
    Is there a way to uninstall the software updates or restore the phone to factory (pre update) settings?

    Yes, you can install your older OS (check your carrier website for the download) to your PC.
    Then you can downgrade to the old OS.
    See more here:
    http://www.blackberryfaq.com/index.php/How_do_I_downgrade_the_OS_on_my_BlackBerry%3F
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • No longer receiving emails after iO6 update??

    I did the iO6 update the other day, I had problems straight away with all my messaging shortcuts not working. To resolve that I had to turn off documents and data in iCloud.
    Now I am no longer getting notified when I have an email. If I go into my mail and refresh it myself I receive about 6 spread across my 2 hotmail accounts. I've tried turning off push, then my phone, and turning both back on but it still doesn't work. Even turned the retrieving mail time down to 15mins and it still doesn't work!
    Thought this update was meant to be brilliant?
    Any help people? I don't want to be constantly checking my mail for emails when it's a smartphone and its meant to do it itself!

    I'm so angry!!!
    The same thing happened to me...I bought an i5 and restored from backup (i had upgraded my i4 to ios6 prior).  now a few of my accounts are no longer working.  i thought a backup would create an exact mirror of what was backed up...but i had to reenter passwords for some accounts and some accounts don't even work even though i know the password!
    just now i read about some battery flaw on the i5 and ios6 and so i manually deleted, hard rebooted, and then re-added all of my accounts back and there was some blip with gmail so that it kept telling me that my user name or password was incorrect when in fact it was correct.
    absolutely irritating...
    come on apple...fix the mail problems

  • Palm m515 lost power and all data and will no longer Sync to Palm Software

    I guess I waited too long between charges and my Palm Lost all its data - however it all backed up on my work PC.  The issue is that when I try to sync it, it asks me to select a user and then I get the following error message "HotSync operation was interrupted.  Some of your data was NOT backed up.  For details, tap HotSync Long on the HotSync screen."  However there are no details to be found, it just says "HotSync operation was terminated. Some of your data was not NOT backed up."
    I am hoping that there is something I can do without reinstalling the software since 1 - all of my information going back to 2002 is only on my computer and 2 - I am not able to install apps on my work computer. 
    Thank you!!!
    Post relates to: Palm m515

     I went to C:\Program Files\Palm - there was no PalmOne folder.  The folders in this folder are _PqiTemp_, Components, helpnote, Image Library, PergolC, Photodesktop, Themes, Update and USB_Driver.  In PergolC there was a folder called backup, which had pictures in it.  I renamed it oldBackup and it still isn't working. 
    Please let me know what else to try.  I have selected my name as the user each time. 
    Post relates to: Palm m515
    Post relates to: Palm m515
    Post relates to: Palm m515
    Post relates to: Palm m515

  • Palm V will no longer sync with desktop software

    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

    Your post indicates iOS 4.3 which is now quite old.  I am going to suggest restoring your iPad, which, among other things, will update your iOS to the current version.
    I recommend restoring your iPad.  Make sure you have the current version of iTunes on your computer (currently 11.0.1).  Plug your iPad into your computer, let it sync, then press "Restore" on the right side when the summary page of the iPad is displayed in iTuens' display.

  • Ipad3 will not let me accept terms and conditions after software update

    I downloaded the new software and had forgotten my password so had to ask for it.Now when I turn on my ipad it goes to the terms and conditions page but will not let me accept them and has a screen behind that  that says create a password but I cannot get to that without accepting terms and conditions!!!! My Ipad is a brick! Help please!

    It had not turned off all the way....now that it has been off ALL the way and turned back on after a minute it let me pass.

  • How long to reboot after software update?

    I just did a system update and it had to reboot when finished. It got as far as a blue screen with a spinning gear-wheel and that's it. It has been like this for 15 minutes. Is this normal? Will it hurt if I use the power button to shut it off, then restart? It has never taken this long before.

    I assume by blue screen and spinning gear you are referring to the shutdown portion of the restart rather than the restart itself.  If this be the case then 15 minutes seems a bit long.  Normally, I don't like recommending abnormal shutdowns because of the possible problems they can cause, but in this case it should be OK.  However, I strongly suggest you first boot from your Snow Leopard DVD and repair the hard drive and permissions:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    This will hopefully assure no disk damage from the abnormal shutdown.  If all is OK then restart the computer normally.

  • Cant send email after software update 10.0.10.85

    Email send and receive was working perfectly for early Z10 adopters at our company (SMTP / POP / IMAP, no BES). However, after the firmware update to version 10.0.10.85, sending email stopped working. In checking the logs on our email server, we found that our Z10's are correctly authorizing to the SMTP server but the connection then fails with an invalid linefeed error.
    According to our mailserver vendor (Ipswitch Imail), this has to do with  RFC 2822 Section 2 which specifically states that bare LF characters are not allowed. We are not experiencing the same problem with Gmail or AOLmail.
    Again, the Z10's did work with the initial firware release and failed after the firware update. Nothing was changed on our mail server in the meantime.
    Thanks in advance for any thoughts

    I see that K-9 Mail has recently become available on App World. On a lark, I decided to give it a try and guess what?... It works just fine. It receives and sends mail exactly the way any native email client should.
    I have an idea for you BlackBerry. Since you appear to be unable to resolve the mail sending issue, and since K-9 Mail is open source, why not download and incorporate their source code into your own mail client, (with proper attribution of course). It would save you the trouble of figuring out for yourselves what you broke in the last firmware update and we would get the fully functioning email we've all become accustomed to on our Blackberry devices.
    Ok, sarcasm off. Guys, I really want to love this phone and you know I'm pulling for you, but I can't send email from my Blackberry and right at the top of this thread is the reason why. If nothing else, a Blackberry MUST do email properly! Are you working on this? Throw us a bone here!

  • My nano will no longer sync to itunes.  I tried to restore nano and received error message 1437 that nano could not be restored.

    My nano will no longer sync to itunes.  I tried to restore it and error message 1437 said it could not be restored.  Any thoughts on how I can sync or restore?

    Good day billoelwein,
    If you are having an issue with your iPod nano being unable to restore,  you may want to first try resetting the iPod. See the directions in this article -
    Reset your iPod - Apple Support
    If the issue is still present after a reset, you may need to restore your iPod nano back to factory settings. See this article -
    Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support
    Thanks for using Apple Support Communities.
    Safe computing,
    Brett L 

  • I have synced my ipod many times, but for some reason it will no longer sync the apps, and says there are app installed that can not be determined. What should I do?

    I have synced my ipod many times, but for some reason it will no longer sync the apps, and says there are apps installed that can not be determined. What should I do?

    See these previous discussions:
    not determined
    iTunes cannot sync... apps not determined installed on...: Apple Support Communities
    installed apps could not be determined...: Apple Support Communities

  • My ipod will no longer sync to my itunes. Shows up but will not sync when i add music

    When i add music to my 5th gen ipod it will no longer sync in itunes. It shows up in itunes, but when i add mysic it comes up with an error number (13019). The songs show under music on my ipod, but when i disconnect it theyre not on there for me to listen to. HELP!!!

    easiest way i have found to resolve the issue is go into itunes while phone is plugged in. you will have a list of tabs across, summery, info, ringtones, music. select music and where it displays sync music unselect that and hit apply in the bottom right (dont worry your music should be saved on the computer) once the sync is complete re check the music sync option. ive noticed this to work 95% of the time......hope this helps
    I Hope I Was Able To Help You Or Solve Your Question.
    Simmm

  • After the most recent update to 11.1, podcasts will no longer sync

    After the most recent update to 11.1, my podcasts will no longer sync.   I've clicking on the manual sync button, but nothing happens.  Any suggestions for me?

    I figured out the problem.  You must click on settings under each Podcast and re-subscribe.

Maybe you are looking for

  • HR-ABAP Need ful documents

    HI Guru's, I have expirence in Normal ABAP . Now I looking to move to HR-ABAP side . can please send any documents regarding HR-ABAP. I mean to say  From whare i need to start and which topics I need to strong..... Regards, Raju.

  • Advice needed on Discount Given by Vendor

    Need Advice...... Vendor has given a discount of 5% on Item.When we enter this transaction in SAP and save it, the Discount amount was not debited, but instead the Net Purchase amount was Debited. For ex Item Paint and solvents - Qty (60 Ltr) * Unit

  • Data Dictionary Dump

    set colsep , heading off echo off feedback off linesize 5000 spool data_dictionary.csv select a.table_name, a.column_name, a.column_id, a.data_type, a.data_length, a.data_precision, a.data_scale, a.nullable, b.comments from user_tab_columns a, user_c

  • Question PC or MAC w/ Logic

    Can anyone help ? I am currently using a Pentium 4 - 3.4 Ghz- Gateway with the Digi 002. The PC is pretty stable but i have a problem with track count being only 16 Stereo. So I figured I could get more tracks with either a different software of goin

  • Use same page dimension

    Is there a way to pass a chosen page dimension to other reports? Example:I have choses a specific product page dimension for my first report, is it possible for subsequent reports to automatically filter for that specific product on each report that