Note on applying patches to the file system and database

Dear all,
I am new to Oracle E-business suite. Anyone in the house that can give a note (either a step by step or oracle metalink note) on how to apply patches to a file system or database.
Kind Regards.

Hi,
Steps to apply an application patch:
- Stop all application services (keep the database and the database listener up and running)
- Download the patch from Metalink
- Copy the patch file to any directory (i.e. /u04/patches)
- As 'applmgr' do the following:
- Source the environment file
- $ cd /u04/patches
- Type 'unzip <patch_number>.zip'
- cd <patch_number>
- Type 'adpatch'
- When it prompts you to enter the patch driver, type 'u<patch_number>.drv'
Apply the patch on the database tier first then on the application tier.
Do not forget to 'Enable Maintenance Mode' from adadmin before applying the patch. Once you apply the patch successfully, 'Disable Maintenance Mode' from adadmin.
And, always follow the steps in the patch README file.
For database patches, follow the steps in the patch README file and apply the patch using opatch as oracle user.
For more details about applying patches, please refer to:
"Oracle Applications Maintenance Utilities" manual
http://download-uk.oracle.com/docs/cd/B25516_14/current/html/docset.html
How to apply EBS 12i pathces in both Linux and Windows
Re: How to apply EBS 12i pathces in both Linux and Windows
Need to apply patch!
Need to apply patch!
Regards,
Hussein

Similar Messages

The Em Key is not configured properly or is corrupted in the file system and doe s not exist in the Management Repository.

I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
C:\Documents and Settings\abigail>emctl status emkey
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is not configured properly or is corrupted in the file system and doe
s not exist in the Management Repository. To correct the problem:
1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
onfig directory.
2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
.ora file location>".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
Please enter repository password:
The Em Key is already configured. To override the current configuration, run "em
ctl config emkey <options> -force".
C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
The Em Key could not be configured. Unable to access file E:\app\abigail\product
\11.2.0\dbhome_1\sysman\config.
C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
http://ABIGAIL:5501/em/console/aboutApplication
DBCONSOLE already stopped...   Done.
Agent is already stopped...   Done.
Securing dbconsole...   Started.
Please enter repository schema password:
Securing dbconsole...   Failed.
EMKey is misconfigured.

Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
ANyway, thank youuuu

When i take a pic it says.. there in not enought FREE MEMORY on the file system

what can i do?

Adamant,
The Bold comes with an SD card, so you need to move all your pics to the card to free up the phone's internal memory. You can also save the pics, by default, to the card, and avoid the problem of running out of space altogether.
I'm running OS 6 on my Bold, so the steps may be a little different, but here's how to save pics to the card:
Turn on the camera, then use the BB key to pull up Options. As you scroll through the choices, toward the bottom is the option to store pictures on the Media card or on the Device.
Also, in the media folder, there are options as to how much space is designated for internal storage of pictures; I can choose 5, 15 or 32 MB to allot for picture storage on the device itself.
To move pics to the card, from the camera, just go into your media/camera to browse the pics, use the Shift + trackpad to select several at one time (they will highlight and then show with a check mark), use the BB key to bring up Options, and MOVE the pics to a folder on your media card. You can create one on the fly or use an existing one.
Let me know if this helps; post back if you have further questions and I'll do my best to try and help you.

Database files list on one drive in master.sys.master_files, but show on another in the file system

We have a one node cluster sql server instance where the machine was patched/updated and re-booted this past weekend. The machine came up, but the SQL Server did not because it could not locate RestoreCheckpointDB24.ckp on an
M drive. If I RESTOREFILELISTONLY on my backups everything was clearly on an N drive previously. To get by the error, our network team changed a registry key pointing to
N drive to M drive and everything magically came up. The file system and failover cluster manager are now showing all files to be on an
M drive, but if you query master.sys.master_files everything is showing on the
N drive. Anyone know how this is possible and how to resolve???
As well, a log shipping session is now broken because it's copying to a missing
N drive and my Management->SQL Server Logs folder is empty as well.
Any ideas? I'm completely baffled as well as our network guys.
Thanks!

I'm thinking your problem is:
"To get by the error, our network team changed a registry key pointing to N drive
to M drive
and everything magically came up."
That's called a hack and hacks usually have unexpected and adverse consequences.
And in more than 15 years of working with SQL Server I've never had to use a registry change to make SQL Server work. As a personal best practice I avoid making manual changes to the registry at all costs.

Help with a fcpx library that is locked "could not be opened. Read-only file system"

Hi all,
I recently moved all my fcpx projects/events to a new Harddrive - I thought I did this correctly by copying/duplicating all projects/events from within FCPX.
When I last used FCPX all the projects/events were there - no issues. Also, when I look at package contents - everything is still there in terms of events and file sizes.
All the library files are on an external hard drive, on an encrypted disk image. Now a week later I have tried to open FCPX and I get the following error
"The document “MND_Z_FCPX” could not be opened. Read-only file system" and nothing will open.
Have checked permissions - these all seem in order. OSX is10.9.5
Any suggestions as to what might be the issue?
Thanks in advance.
R

the permissions themselves look ok - they have my two computer profiles as read/write. I also note that on some occasions the library has opened in my other Computer profile, but not in the one that I want it to open.
So I think you're right, there is something with permissions happening here. I keep a work and personal computer profile.
Don't know how it happened - but the volume is definitely Read Only - even though I've created a Read/Write permissions for it

Images: displaying from the file system

I have the instructions for loading images into a database column. However, for my prototype, I want to read leave the images in the file system and store the filenames in the database. Then I want to create a form to display the images in an 'art gallery' kind of format, like a column for the picture, a column for a description, and column for a checkbox, so the user could say 'I want this one, this one, and this one.' What's the best approach for this kind of thing?

Have you looked at the sample application? I think it has a table just like that, I don't have it installed anywhere anymore, so don't know off the top of my head.
One way is
your pictures table would have a format like:
ID, PICTURE_NAME, DESCRIPTION
your report is then:
select htmldb_item.display_and_save(1, id) id,
'< img src = "/i/your_directory "'|| picture_name ||' " < /img > ' picture,
htmldb_item.checkbox...

I am trying to resize disk space on parallels 6 for windows XP under configure Hardrive and I get the error resizing failed unable to resize last volume the file system of this volume might be damaged or not supported? I am on a Mac using Parallels 6

I have been trying to increase my disk space for windows xp on my Imac and I am running parallels 6. before opening windows I go into configure in parallels and open the hard drive and try to move the allotted disk space from 32 gig to 64 or any other increased gig and then apply and I get the error message: resizing failed unable to resize last volume. The file system of this volume might be damaged or not supported. How do I increase the size?? I just also did a disk repair utility with Apple on the Apple side of my IMAC. Please Help!! I had uninstalled SQL server on the windows side and needed to uncompress files to install this and then I ran short on disk space.

This sounds to me that your Parallels XP file system is corrupted and not the OSX file system.
Have you checked the XP file system while running the Parallels XP yet ?
However, it would be better to ask such question in the Parallels Forum http://forum.parallels.com/
Stefan

IPhoto9: "library could not be opened because the file system of the library's volume is unsupported."

Can please anyone help me with this issue.
After upgrading from iPhoto8 to iPhoto9 my library won't open anymore. I have stored all my pictures on a NAS (Buffalo Link Station Duo). It all worked fine but since upgrading to iPhoto9 I do have the following problem:
When opening iPhoto I receive a message that the library needs to be updated. I assume that iPhoto should just do this sort of automatically in order to upgrade to iPhoto9.However, next message I receive then is
"The library could not be opened because the file system of the library's volume is unsupported."
Apple support so far does not seem to be able to solve my issue. Anyone else having had the same issue and having a solution to this?
Thanks a lot for your help.

There is no solution.
IPhoto needs to have the Library sitting on disk formatted Mac OS Extended (Journaled). Users with the Library sitting on disks otherwise formatted regularly report issues including, but not limited to, importing, saving edits and sharing the photos.While you have been lucky to date, many folks with a library on a NAS found that it worked for a while and then the problems started.
Workaround: Put the Library on a Disk Image formatted Mac OS Extended (Journaled) and store that on the NAS. But the real solution is to use a properly formatted disk for the Library.
Regards
TD

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported".

What is the best way to copy aperture library on to external hard drive? I am getting a message that say's "There was an error opening the database. The library could not be opened because the file system of the library's volume is unsupported". What does that mean? I am trying to drag libraries (with metadata) to external HD...wondering what the best way to do that is?

Kirby Krieger wrote:
Hi Shane. Not much in the way of thoughts - - but fwiw:
How is the drive attached?
Can you open large files on the drive with other programs?
Are you running any drive compression or acceleration programs (some drives arrive with these installed)?
Can you reformat the drive and try again?
Hi Kirby,
I attached the UltraMax Plus with a USB cable. The UltraMax powers the cable so power is not an issue. I can open other files. Also, there is 500GB of files on the drive so I cannot re-format it. Although, I noted I could import the entire Aperture Library. However, I do not want to create a duplicate on my machine because that would be defeating the purpose of the external drive.
Thanks,
Shane

Cascading Style Sheets are NOT written to the file system

Hallo,
On the "Cascading Style Sheets" page is written that: "The Cascading Style Sheets are written to the file system, so you can reference them in your HTML source code."
I am true that if this works I can reference the css with something like this?
<link rel="stylesheet" href="/i/sample.css" type="text/css">
and do not need this style:
<link rel="stylesheet" href="#APP_IMAGES#sample.css" type="text/css">
<link rel="stylesheet" href="#WORKSPACE_IMAGES#sample.css" type="text/css">
I have looked on the "Cascading Style Sheets" page: http://127.0.0.1:7780/apex/f?p=4000:37
Are there some other preferences, options, etc. to set that this will be working?
Thx for your help. Willi

Hi,
CSS files uploaded through Shared Components, Cascading Style Sheets are written into the database, so you would have to use:
<link rel="stylesheet" href="#WORKSPACE_IMAGES#sample.css" type="text/css"/>You should be able to see these if you run the following in SQL Commands:
SELECT * FROM APEX_APPLICATION_FILES
WHERE UPPER(FILENAME) LIKE '%CSS%'Andy

IPhoto The library could not be opened because the file system of the library's volume is unsupported.

Have Yosemite installed on both my MBA and Mac Pro. iPhoto 9.0 running well on the MBA but when I tried opening iPhoto on my Mac pro get the message "The library could not be opened because the file system of the library's volume is unsupported." This is after I upgraded iPhoto.
Any help would be greatly appreciated.

While holding down the command & option keys boot into iPhoto and have it repair the Library. If that does not work then download "Library Manager" and have that program work. I found that better than the Apple program.

CSS '%% The File System is not mounted.' error.

While I first thought that this was a hardware problem, I've had it happen to 3 of my CSS 11503s in the last 2 weeks. I logged into the CSS and found that the prompt had gone back to the default prompt. Upon further investigation, I was not able to do a write mem - it would just return the following error:
%% The File System is not mounted.
Has anyone seen this before? I went to reboot the unit, but I've lost access to it. I'm actually going to the datacenter today to check it further, but I was hoping someone might be able to tell me if this is a bug or software issue I might need to worry about. Any help would be appreciated. Thanks!
Additional info:
CSS 11503 - failover pair running in one-armed mode.
Version: sg0730203 (07.30.2.03)
Flash (Locked): 07.30.2.03
Flash (Operational): 07.30.2.03
Type: PRIMARY
Licensed Cmd Set(s): Standard Feature Set
Jason

Looks like you have a hard disk failure.
Reboot the CSS and let it go through a full diagnostic.
If it does not work after reboot, you will need to replace the unit.
If it works, this could be a one-time error.
If the error comes back, definitely replace the box.
Gilles.

I am on a i mac osx 10.8.4 and can not get into i photo i keep recieving the message "The library could not be opened because the file system of the library's volume is unsupported.

I am on a i mac osx 10.8.4 and can not get into i photo i keep recieving the message "The library could not be opened because the file system of the library's volume is unsupported."

Where is the Library? It needs to be on a disk formatted Mac OS Extended (Journaled)

Trying to make a iPhoto Library on my external hard drive but I get "the library could not be opened because the file system of the library's volume is unsupported.

Trying to make a iPhoto Library on my external hard drive but I get "the library could not be opened because the file system of the library's volume is unsupported." I reformatted my hard drive to ExFAT because I want to be able to use it on PC and MAC.
iOS: 10.10.1
Mac Book Air
External: WD 500 GB recently reformatted (no files on it currently)

The iPhoto library must only be on a volume formatted Mac OS extended (journaled) - it can not be on any other format drive
LN

Bug: Unhandled Exception: System.IO.IOException: The requested operation could not be completed due to a file system limitation

Hello, I have a 35GB text file that I'm copying from one folder to another folder via c#
(I simply open a StreamReader and a StreamWriter and copy line by line (something like sw.WriteLine(sr.ReadLine());)
If [the destination folder is a "windows compress folder" (right click folder > properties > Advanced > Compress content to save disk space)] then it fails else it works well.
Any idea how to solve the issue?
I have windows 8.1 with all latest updates. The ssd is a samsung 850 pro, and I tried on 2 machines, same results.
So to recap, it seems the issue is with the writing of big files on a compress folder, the reading is fine.
thanks.
w
Error:
2015.01.08 10:15:27] Unhandled Exception: System.IO.IOException: The requested operation could not be completed due to a file system limitation
[Err, 2015.01.08 10:15:27]
[Err, 2015.01.08 10:15:27] at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
[Err, 2015.01.08 10:15:27] at System.IO.FileStream.WriteCore(Byte[] buffer, Int32 offset, Int32 count)
[Err, 2015.01.08 10:15:27] at System.IO.FileStream.Write(Byte[] array, Int32 offset, Int32 count)
[Err, 2015.01.08 10:15:27] at System.IO.StreamWriter.Flush(Boolean flushStream, Boolean flushEncoder)
[Err, 2015.01.08 10:15:27] at System.IO.StreamWriter.Write(String value)
w.

Hi w,
Per my understanding. This is not a C# code issue. I doubt the issue related your OS.
After search the error info,
here is a possible solution, please take a look
“The requested operation
could not be completed due to a file system limitation.”
<copied>
Please use Disk Defragmenter to defrag the NTFS volume on your side, which should fix this issue.
Please refer to:
A heavily fragmented file in an NTFS volume may not grow beyond a certain size
http://support.microsoft.com/kb/967351
For the limitation of NTFS, please check the following online guide.
How NTFS Works
http://technet.microsoft.com/en-us/library/cc781134(WS.10).aspx
</copied>
Best of luck!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Note on applying patches to the file system and database

Similar Messages

Maybe you are looking for