Notification alert tone when there are no notifications

Hi, just updated to 5.1.1 now when my phone is locked I get repeated notification tones but when I unlock phone there are no notifications or txt messages. It's driving me nuts.

I think I have found what it is but I don't know how to fix it. It seems to be going off when my mobile signal (phone carrier) drops off and then again when it rejoins the network. Thus is so infuriating I have a couple of blank spots in my house and it goes off every time I walk into them, and in various places at work like meeting rooms corridors etc. I really need to turn this off or I'll have to bin the phone it's making it impossible to have it without it being on silent. Then I miss all my calls and texts. I would never have updated had I known.

Similar Messages

TS2755 No alert tone when messages are received

The alert tone is no longer sounding when a SMS or iMessage is received. Is there something I can do?

Hi Gelis,
Thanks for visiting Apple Support Communities.
Try these troubleshooting steps if you are not hearing alert sounds on your iPhone 5:
Verify that the volume is set to a level you would normally be able to hear.
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
You can find the article with these steps here:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Regards,
Jeremy

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

My iPad screen went black suddenly and is not coming back on. However i can still hear sounds when there are notifications but nothing comes on the screen. It remains blank. What is the problem? I NEED ASSISTANCE A.S.A.P!!!

Try Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Why can't I get alert tones when I send or receive email. I checked Sounds and volumes are at max.

Why can't I get alert tones when I send or receive email. I checked Sounds and volumes are at max.

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

How do we alert agents that there are other calls in the queue?

Hey,
I'm trying to figure out a way to alert agents that there are other calls in the queue (whether they're ready or not-ready). I've seen systems that have a separate button on the phone that flashes when there's a call sitting in the queue.
The purpose of this is two fold:
1) if they are on a call they know they need to step up the game a bit to get the current issue resolved.
2) if they are "not-ready" and didn't notice the software, the blinking phone should help jump-start their brain to think "why isn't my phone ringing?"
A wallboard, while nice, is not practical for the situation i'm looking at (information desk). I'd like to minimize the number of things they have to keep track of (walk-ins, a PC, and the phone only), and a flashing button seems like a good way to do that.
Has anyone seen something similar to this on UCCX?
JM

Hi thanmad,
I don't have a sample script with me on hand now, the script i did before is part of our production scripts. But the script required to alert the agents is fairly simple.
First part is identifying when you would like the alert to be triggered, for example say when the call is been in the queue for 2 minutes. You can achieve this in different ways; you can use “Get reporting statistic” and use a field which will give you the Current wait duration of the caller, in this case Report object “csq ipcc express” need to be selected. You then need to compare the result with the predefined duration (seconds) and if the result is higher, then trigger the Alarm.
The Alarm is triggered to the alerting device by using “Call Consult Transfer” set a time out for it and then send the call back to the Queue. Make sure this device doesn’t have any VM setting or forwarding configured to it. If you don’t want reporting statistics you can just put this step where you want in the script and when the call hits it, it will trigger the alarm.
Not sure if it makes sense to you but I would recommend you playing with it and see if it is what you are looking after.
HTH!

How to change the default JRE when there are several version of JRE in Sys

How to change the default JRE when there are several version of JRE in System?
i have installed j2sdk1.5.0 then installed j2ee1.4,then installed Weblogic6.1 which use jdk1.3
Now the JRE is jdk1.3\bin
When run class that was compiled with jdk1.5,throw:
java.lang.UnsupportedClassVersionError
How can i change the jre to 1.5?

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

Problem with XML Publisher report when there are no detail records.

I am working on an Oracle XML Publisher procurement report (Oracle E-Business Suite R12) that starts with a budget amount that is imported from our financial system, then lists all requisitions and orders that are in process (not approved). The amounts of all those unapproved requisitions/orders are totaled using a Sum form field, to be followed by a field where the unapproved requisition/order total is subtracted from the budget amount (amount available). I am running into a problem when there are no unapproved requisitions. When I run the report for such instances, it completes with a warning -- here is what it states in the OPP log:
oracle.xdo.parser.v2.XPathException: Extension function error: Method not found 'sum'
I have altered my sum field on the RTF template to include an if statement in case of a null value...
<?sum (EXTENDED_COST)?> <?xdofx:if sum (EXTENDED_COST) = " then 0 end if?>
...but this does not work.

Hi,
You are on right track. Simply put summary field in header group and remember to set reset at property to Header Group Not Child and now you can use this field in format trigger.
Format trigger must be written on header frame.
Cheers !
Adinath Kamode

IPhone 4s has yahoo mail icon permanently on safari when there are no open pages

My iPhone 4s using iOS7.0.2 has a Yahoo mail icon displaying permanently on the top of Safari when there are no open pages. The icon did not disappear even when I deleted my Yahoo mail account. The icon also has my Yahoo username displayed below it. Is there any way I can remove the Yahoo mail icon from permanently displaying on Safari? I cleared my history, cookies and data, but the Yahoo icon is still there.

I have the same issue and koban4max's sugggestion doesn't work (well, it works, but you'll need to do it once a day.) I am surprised this hasn't been widely reported either as an iphone, Verizon or Yahoo issue. I tried various suggestions (deleting/re-adding account, moving messages to a new folder and changing password on computer/iphone, etc.) It will push for a while but stop pushing in a few hours or a few days. This leads me to believe somewhere in the interface corrupts the process. I would love to know if it's unique to Verizon, iphone 4S or IOS 5, or all of the above. The phone doesn't even fetch according to schedule, only when you are in the application. BTW, the Exchange push solution for Gmail works wonderfully.
iphone 4S, IOS 5, Verizon.

After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

After several years of use very satisfied with Firefox, recently loaded version (4.0.1) severely slows my browsing, and even my system, especially when there are pictures or videos. I said that this was not the case before and my system is Windows XP SP3.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Joining 2 related records using PL SQL in Apex - Problems when there are more than 2 related records?

Hi
I am combining 2 related records of legacy data together that make up a marriage record. I am doing this in APEX using a before header process using the following code below which works well when there are only 2 related records which joins the bride and groom record together on screen in apex. I have appended a field called principle which is set to 'Y' for the groom and 'N' for the bride to this legacy data
However there are lots of records where in some instances there are 3, 4 , 5, 6 or even 1 record which causes the PL/SQL in APEX to not return the correct data. The difference in these related columns is that the name of the bride or groom could be different but it is the same person, its just that from the old system if a person had another name or was formally known as they would create another duplicate record for the marriage with the different name, but the book and entry number is the same as this is unique for each couple who get married.
How can I adapt the script below so that if there are more than 2 records that match the entry and book values then it will display a message or is there a better possible work around? Cleaning the data would be not an option as there are thousands of rows of where these occurrences occur
declare
     cursor c_mar_principle(b_entry in number, b_book in varchar2)
     is
          select DISTINCT id, forename, surname, marriagedate, entry, book, formername, principle
          from   MARRIAGES mar
          where mar.entry   = b_entry
          and    mar.book = b_book
          order by principle desc, id asc;
     rec c_mar_principle%rowtype;
begin
open c_mar_principle(:p16_entry,:p16_book) ;
fetch c_mar_principle into rec;
:P16_SURNAME_GROOM   := rec.surname;
:P16_FORNAME_GROOM   := rec.forename;
               :P16_ENTRY := rec.entry;
               :P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_GROOMID := rec.id;
fetch c_mar_principle into rec;
:P16_SURNAME_BRIDE   := rec.surname;
:P16_FORNAME_BRIDE   := rec.forename;
               :P16_ENTRY := rec.entry;
               :P16_BOOK :=rec.book;
:P16_FORMERNAME :=rec.formername;
:P16_MARRIAGEDATE :=rec.marriagedate;
:P16_BRIDEID := rec.id;
close c_mar_principle;
end;

rambo81 wrote:
True but that answer is not really helping this situation either?
It's indisputably true, which is more than can be said for the results of querying this data.
The data is from an old legacy flat file database that has been exported into a relational database.
It should have been normalized at the time it was imported.
Without having to redesign the data model what options do I have in changing the PL/SQL to cater for multiple occurances
In my professional opinion, none. The actual problem is the data model, so that's what should be changed.

Displaying a message when there are no results from an XSL Query

Using MM_XSLTransform.class.php
I am querying an XML file to produce a list of places whose town name or address match a letter of the alphabet. The letter is passed as a variable in a URL.
XSL:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<xsl:param name="letter"/>
<xsl:output method="html" encoding="UTF-8"/>
<xsl:template match="/">
<xsl:for-each select="dataroot/CPINFOWEB[Town=starts-with(Town, $letter) or Name=starts-with(Name, $letter)]">
      <table width="100%" border="0" cellspacing="0" cellpadding="0">
        <tr>
        <td>
    <a href="detail.php?park={CostCode}"><xsl:value-of select="Name"/></a><br />
          <a href="detail.php?park={CostCode}"><xsl:value-of select="Town"/></a><br />
      <xsl:value-of select="Address"/><br />
      <br />
      </td>
        </tr>
      </table>
      </xsl:for-each>
</xsl:template>
</xsl:stylesheet>
Destination PHP file:
setXML("../regions/CPINFOWEB-mobile.xml"); $mm_xsl->setXSL("list.xsl"); $mm_xsl->addParameter("letter",$_GET['letter']); echo $mm_xsl->Transform(); ?>
The result Name and Town are displayed as a URL to link to a "more details" page.
All works fine, but when there are no results for a letter of the alphabet I obviously get a blank page.
How do I display a "no results" message instead

I deleted my original reply because the formatting of the XSL code was messed up by the forum. Here's trying again:
Your current code creates a new table for each result. The opening and closing <table> tags should be outside the the <for-each> loop. To deal with the possibility of no results being found, use a conditional statement and the count() function like this:
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<xsl:param name="letter"/>
<xsl:output method="html" encoding="UTF-8"/>
<xsl:template match="/">
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<xsl:for-each select="dataroot/CPINFOWEB[Town=starts-with(Town, $letter) or Name=starts-with(Name, $letter)]">
        <tr>
        <td>
    <a href="detail.php?park={CostCode}"><xsl:value-of select="Name"/></a><br />
          <a href="detail.php?park={CostCode}"><xsl:value-of select="Town"/></a><br />
      <xsl:value-of select="Address"/><br />
      <br />
      </td>
        </tr>
</xsl:for-each>
<xsl:if test="count(dataroot/CPINFOWEB/Town) &lt; 1">
    <tr>
    <td>No records found</td>
    </tr>
    </xsl:if>
</table>
</xsl:template>
</xsl:stylesheet>

Avoid marking files as modified by Git when there are no changes

Hello,
I am working on a project using Visual Studio 2013 Ultimate and Enterprise Architect 9.0 (a UML tool). I am using Git for Source Control in Visual Studio.
I have set up the programs so that I can synchronize code from Enterprise Architect (EA) to Visual Studio (VS) and vice versa using MDG Link for Visual Studio (an Enterprise Architect add-in). I first synchronized all the existing code from VS to EA.
Now I have the following workflow:
Create UML models in EA;
Add necessary attributes and operations to the class models;
Synchronize models with the code, which will add the added attributes and operations to my source;
The last step will regenerate all my source code files, but even if there are no changes Git marks the files as modified.
How can I avoid this behaviour, because now all my files are modified when Enterprise Architect synchronizes the model with the source code.
I only want Git to mark it as modified when there are actually things added or modified in the file.
Any help will be appreciated.
Marcel

Hi,
I think it's more VS which detect the file was modified, and by default it mark the file as modified in Git.
But normally when you want to commit your work these files are removed because Git detect the files are not really changed.
Did you try to refresh the pending changes in the team explorer (F5). Perhaps Git recalculate all the differences, and then detect the real changes.
Regards,
Yan Grenier
Merci de bien vouloir "Marquer comme réponse", les réponses qui ont répondues à votre question, et de noter les réponses que vous avez trouvé utiles.

Why do duplicate albums appear on my iPod Classic screen when there are no duplicates in my iTunes Library?

Why do duplicate albums appear on my i{Pod Classic screen when there are no duplicates in my iTunes Library?

It's probably going to be a capitalisation error. In other words, one or more tracks on the album has a lower case letter at the beginning of the album name while all the others have a capital letter. They can be difficult to spot.
In iTunes, examine one of your duplicated albums carefully. You should be looking for a slight difference between the album title name. Look at the screenshot below, can you see the error in the album title?
It is there...
The title track (Left Of The Middle). Look at the capitalisation of the album name.
Once you find you error in your album, re-type it (or copy-and-paste from one track to all the tracks) and then SYnc your iPod to iTunes. Does that cure it? If nto, let us know.

How can I get rid of duplicate birthdays in icloud Calendar, especially when there are no Contacts in the iCloud? Case ID: 365381395

How can I get rid of duplicate birthdays in icloud Calendar, especially when there are no Contacts in the iCloud? Case ID: 365381395

Found the answer myself while helping to set up iPhone. It is simple when you know how. Before signing out of iCloud to sign in again and restore the link to Photo Stream I had opted to copy iCloud contacts to the Mac. When I signed in again this created two iCloud views which can be seen in Contacts Preferences. I just disabled one of them. Not brave enough to attempt removal but I gues this would work too.

Minimize the count of cubes when there are more number of cubes

Hi All:
Need your inputs on reducing the count of cubes when there are more number of cubes in any project.
On which basis we can downsize the count of cubes? For example,if there 30 cubes in same region,I want to reduce them to ,say 20 cubes.
Please share your thoughts.
Regards,
Upendra.

You need to evaluate all of your existing cubes and see if there is any overlap in dimensionality that would allow you to combine cubes. Such as if one is actuals and another cube is budget for the same data, possibly you can combine those. Or as someone else suggested based on Business Units (If the other dimensions allow it. Perhaps conflicting Account or other structures won't allow it. )
However you have to then balance combining cubes against larger cube size which could impact calc time and other performance issues.
Its all a balancing act.
Look at where it makes sense to combine them. Only you know your environment enough to state if they can be combined or not.

Notification alert tone when there are no notifications

Similar Messages

Maybe you are looking for