Notification emails for received web forms

Can I set these emails to display the customer's email address in the 'From' section of the email rather than my own so I can simply click reply in my email program?

Hi,
I tested using {module_emailaddress}and it worked. So under System Emails -> Workflow notification -> Email From Address: Please try to place "{module_emailaddress}" youremailaddress.
Test a webform and click on reply to see the customer's email address. Though it is not showing in the 'From' section.
Hope that helps!
Kind Regards,

Similar Messages

Single notification email for all users

Hi friends,
Is there any way of setting a single notification email for all users in oracle 11i so that all the notification email goes to that email address (for test purpose only)?
thanks in advance.
LISAN

See MOS Doc 562551.1 (Workflow Java Mailer FAQ ) and search for "override address". More details in MOS Doc 828812.1 (How To Stop Old Outbound Workflow Notification Email Messages During Clone Activity)
HTH
Srini

Disabling subscription notification email for specific folders

Hi is it possible to disable subsription notification email for specific folders.
We have a custom application which sends notifications and hence do not want duplication of mails.
Thanks
rocky

Hi Rocky,
If these folders are in a separate repository, the subscription service can be disabled.(not configured) for this repository.
Regards,
Isvarya

How to set up notification email for Full CPU utilization on OEM12c?

I have found a Oracle Doc,Is that's the way email notifications are setup?How can i check that after setting the notifications?
4.1.2.3 Subscribe to Receive E-mail for Incident Rules
An incident rule is a user-defined rule that specifies the criteria by which notifications should be sent for specific events that make up the incident. An incident rule set, as the name implies, consists of one or more rules associated with the same incident.
When creating an incident rule, you specify criteria such as the targets you are interested in, the types of events to which you want the rule to apply. Specifically, for a given rule, you can specify the criteria you are interested in and the notification methods (such as e-mail) that should be used for sending these notifications. For example, you can set up a rule that when any database goes down or any database backup job fails, e-mail should be sent and the "log trouble ticket" notification method should be called. Or you can define another rule such that when the CPU or Memory Utilization of any host reach critical severities, SNMP traps should be sent to another management console. Notification flexibility is further enhanced by the fact that with a single rule, you can perform multiple actions based on specific conditions. Example: When monitoring a condition such as machine memory utilization, for an incident severity of 'warning' (memory utilization at 80%), send the administrator an e-mail, if the severity is 'critical' (memory utilization at 99%), page the administrator immediately.
You can subscribe to a rule you have already created.
From the Setup menu, select Incidents, then select Incident Rules.
On the Incident Rules - All Enterprise Rules page, click on the rule set containing incident escalation rule in question and click Edit... Rules are created in the context of a rule set.
Note: In the case where there is no existing rule set, create a rule set by clicking Create Rule Set... You then create the rule as part of creating the rule set.
In the Rules section of the Edit Rule Set page, highlight the escalation rule and click Edit....
Navigate to the Add Actions page.
Select the action that escalates the incident and click Edit...
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/notification.htm#CACHDCAD

Make sure you have correct thresholds...
from target home>monitoring>"Metric and Collection Settings"
Check the incident rule for warning and critical events for host targets
Setup>Incident>Incident Rules

Emailing for a request form

I hired someone to create a request form for a company's website. He did that. And then, as of January the company's email service changed their security to stop spammers, spoofers and other malfeasance. And what then happened is that several people stopped getting email requests from the company's website for service, sales or support.
The form is here: http://alertscientific.com/contact.php
Here is what I have that checks to see if everything is filled out properly (it's a file called function.php and it's called by the main script):
<?php
function checkinfo(&$pst)
 $states = explode("|","AK|AL|AR|AZ|CA|CO|CT|DC|DE|FL|GA|HI|IA|ID|IL|IN|KS|KY|LA|MA|MD|ME|MI|MN|MO|M S|MT|NC|ND|NE|NH|NJ|NM|NV|NY|OH|OK|OR|PA|RI|SC|SD|TN|TX|UT|VA|VT|WA|WI|WV|WY");
 $err = "";
 foreach($pst as $key => $val)
 if(!empty($_POST[$key]))
 switch($key)
 case "dob":
 if(!strtotime($_POST[$key]))
 $err .= $pst[$key]." ".$_POST[$key]." is not a valid date.\r ";
 break;
 case "phone":
 $temp = $_POST[$key];
 if(substr($temp, 3, 1) != "-")
 $temp = substr($temp, 0, 3)."-".substr($temp, 3, strlen($temp)-3);
 if(substr($temp, 7, 1) != "-")
 $temp = substr($temp, 0, 7)."-".substr($temp, 7, strlen($temp)-7);
 if(!preg_match("/^([1]-)?[0-9]{3}-[0-9]{3}-[0-9]{4}$/i", $temp))
 $err .= $pst[$key]." ".$_POST[$key]." is not a valid phone number.\r ";
 break;
 case "state":
 if(!in_array($_POST[$key], $states))
 $err .= $pst[$key]." ".$_POST[$key]." is not a valid state. Please use your state's two character abreviation.\r ";
 break;
 case "email":
 if(!filter_var($_POST[$key], FILTER_VALIDATE_EMAIL))
 $err .= $pst[$key]." ".$_POST[$key]." is not a valid email address.\r ";
 break;
 case "zip":
 $temp = str_replace("-","",$_POST[$key]);
 if(!is_numeric($temp) || (strlen($temp) != 5 && strlen($temp) != 9)) {
 $err .= $key." --- ".$pst[$key]." ".$_POST[$key]." is not a valid zip code.\r ";
 } else {
 $err .= $pst[$key]." is empty.\r ";
 if($err != "")
 return "The following errors were found:\r\r ".$err;
 } else {
 return $err;
?>
That is not the problem.
Now, we come to the problem:
validate.php does all of the heavy lifting.
<?php
require_once("function.php");
$expected = array("name"=>"Name", "need"=>"need", "address1"=> "Address 1", "city"=>"City", "state"=>"State", "zip"=>"Zip", "email"=>"Email", "phone"=>"Phone" );
$options = array("name"=>"Name", "title"=>"Title", "company"=>"Company", "need"=>"need", "address1"=>"Address 1", "address2"=>"Address 2", "city"=>"City", "state"=>"State", "zip"=>"Zip", "email"=>"Email", "phone"=>"Phone", "httpagent"=>"Browser info: ", "httpref"=>"Referrer", "ip"=>"Ip address");
$needs = array("service"=>" service.", "sales"=>" a salesperson contact you.", "literature"=>" literature be sent to you.");
$wants = array("service"=>" service.", "sales"=>" to be contacted by a salesperson.", "literature"=>" that literature be sent.");
$errors = checkinfo($expected);
$serv_two = "[email protected]";
$lit_one = "[email protected]";
$sales_two = "[email protected]";
if($errors == "") {
 $replace = array("PHPNAME", "PHPNEED", "PHPIPADDRESS");
 $with = array($_POST['name'], $needs[$_POST['need']], $_POST['ip']);
 $output = file_get_contents("sendail.html");
 $output = str_replace($replace,$with, $output);
 $message = $_POST['name']." has requested".$wants[$_POST['need']]."\r";
 foreach($options as $key => $val) {
 $message .= $val.": ".$_POST[$key]."\r";
 $headers = 'From: [email protected]' ."\r\n" .'Reply-To: [email protected]'. "\r\n" .'X-Mailer: PHP/' . phpversion();
 switch($_POST['need']) {
 case "service":
 $subj = "Service request";
 mail($serv_one, $subj, $message, $headers);
 mail($serv_two, $subj, $message, $headers);
 break;
 case "sales":
 $subj = "Sales request";
 mail($sales_one, $subj, $message, $headers);
 mail($sales_two, $subj, $message, $headers);
 break;
 case "literature":
 $subj = "Literature request";
 mail($lit_one, $subj, $message, $headers);
 mail($lit_two, $subj, $message, $headers);
 break;
 echo $output;
} else {
 echo "Errors: ".$errors;
 echo "Please click the back button and update your choices. ";
echo "Validating...";
print_r($_POST);
?>
At issue here are the headers (shown in red). The incoming email server is blocking stuff from my website because my website is not the email server. And so no email is received, it is assumed to be spam.
How do I tease the actual sender's email out of the array of stuff and place it into the headers?
Thanks!

Here's what I was looking for:
$headers = 'From:'.$_POST['email']."\r\n" .'Reply-To: '.$_POST['email']."\r\n" .'X-Mailer: PHP/' . phpversion();
Now, here's the problem...
The folks at the incoming server changed their security protocols in January, resulting in lots of messages not being delivered -- but the company had a second person receiving emails who did recieve them.
So, Some people got the emails, others didn't.
The email hosting people are very nice on the phone, but they blamed my server. Said that I had to change to port 2525. I was set up to port 25 (default for email) and 587. So I did that, as well as changed the code. Now, the email is from the sender with the reply-to from the sender.
But here is going to be the next step: If these people keep blaming "insecurity" at my end, I'll tell the company to switch to my server. Then a company whose name includes "Forest" will lose some easy money for providing email and webmail.
This problem will be solved. I have changed php code and I have altered the port. If their host isn't getting the emails in all in-boxes, we switch on Monday. I don't have time to play games.
-Mark

Notification email for workflow

I have configured the smtp server and also the email transport and channels and the channel orginators.Emails are sent for subscription service and also 'send to' works fine.
But the problem is that the notification emails are not sent to the approvers when a document is sent for an approval cycle.
I have also seen that the permissions for etc\notification folder is readonly for 'Everybody'
Please can any one tell what i am missing.

Hi Aamod,
Look at the permissions set for the /etc/notifications folder. The "Everyone" group (or at least, the roles for your users) must have read access on this folder which contains the xml templates for the notification e-mails. This could explain why content_admin and super_admin roles receive e-mails and others do not.
Also check the following links:
Notification By Mail
http://help.sap.com/saphelp_nw04/helpdata/en/89/c5fd430b63c74bbdfaa5f2ec9bb20b/frameset.htm
Email Notification
http://help.sap.com/saphelp_nw04/helpdata/en/41/080aab7cefe34d8acb04861a467efc/frameset.htm
I think this will help you.
Thanx & Regards
Anish

How to configure notification emails for reports output or alerts for all users in r12

Hi,
I need to configure notification emails. I have provided settings in OAM-> Workflow and SMTP IP address in settings and only Outbound. I am able to test for my user ID.
I want to know how to redirect emails or alerts for users like when a user runs a report he should get notification email in his outlook about the report output and details. In settings it only points for one replyto field. How do I mention all user ID's?
Regards,
Mohammed

Hi Mohammed,
You may check on XML bursting for XML based reports.
In addition, also see links:
http://oracle.anilpassi.com/email-output-of-concurrent-program-request.html
Anil: Oracle Apps Concurrent program Output as Email
Oracle ERP World: Email the output of a concurrent program as Attachment
Also see:
How to Redirect Output from Printer to Mail Message after Running Report (Doc ID 1036586.6)
Thanks &
Best Regards,

CSS does't work for new Web Form wpc_mini_article

Hello,
I created a new web form following [this guide|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2041eb17-6001-2b10-b08d-b95ce55fa9b7], which works pretty good. The problem is that I personalized the sdn_general.css file but none of the definitions made in that css file works in the content using the new web form, called wpc_mini_article.
I guess there must be something else to configure, but where?
Thanks!
Demis

Hi,
You can modify the Content.css. Be sure to modify the right anchor, such as h2 for exemple....
Exemple : modifying the style of every H2 included in a <a> :
h2 a
Content.css is located on : Content Administration > KM Content, then the path is : root > etc > wpceditor > css > runtime > content.css
You have to save it on a local directory, edit it, delete it on KM and then upload the modifyied content.css you just made.
Fabien.

How to find last_query for oracle web form?

I know that for standard forn we can navigate diagnostics-system-last_query
How can we do it for web forms?
Diagnostics menu contain only 5 items
- Show log
- Set trace lavel
- Show Log on screen
- Show pool monitor
Thanks

Are you talking about the Block Menu - which allowed you to select the "Last Query" variable? If so, Forms 6i was the last version to support the Block Menu. If you need to see the last query executed, then you will have to explicitly capture the value of the :SYSTEM.LAST_QUERY variable. In other words, you will have to write code to assign the value of :SYSTEM.LAST_QUERY to a form variable.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Notification Emails for User Administration

Hi all,
I'd like to configure the Netweaver system to automatically send out mails to users when the account is created using "Generate Password".
This system is a pure Java system and does not have the ABAP components and therefore I am not able to use the SCOT or RZ10 tcode to configure the SMTP.
I have went to User Aministration > Configuration > Notification Email and set the hostname there. It does not send out any mails. Am I missing any steps? Any help is appreciated.

The javamail has to be set in ConfigTool for Netweaver to send mails.

Notification Email for UWL

Hi,
We have a requirement to send all UWL notification emails to Outlook Inbox of the users.
Is it sufficient to make the appropriate settings in
Syst admin>Syst Config>UWL>workflow>Mail
Are any other settings required?(Groupware transports,system creation etc)
Thanks
Rocky
P.S:Will reward points for helpful answers.

Hi rocky kurien ,
These websites may be useful for u:
Getting Started Using SAP Software
http://help.sap.com/download/documentation/additional/getstart/netweaver/GettingStarted_nw2004s_EN.pdf
How toIntegrate the BW Reporting Agent With the Alert Framework
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/031faa90-0201-0010-23b3-a5b88e812d15
New Forums in the SAP NetWeaver Portal
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/204bb3bc-10ea-2910-448a-a780c63978cd
http://www.uisol.com/uisol/papers/UISO-PGandE_Paper_Distributech_2006.pdf
cheers!
gyanaraj
****Pls reward points if u find this helpful

How to email data from web form?

I need some direction please. I have created a web page (.htm) that has several textboxes, a submit and clear button. The purpose of this web page is for users of the company intranet to input data into the textboxes and then clicking on Submit will email the data to those responsible for filling the users request. The web page will be served up on the companys intranet using the Apache web server that is running on Solaris 10. It seems to me that I will need an email server, but I do not know what Sun program to install and how to configure it. Thank you for any guidance you can provide.

You need an amp (apache2, mysql, PHP/Python) stack - that's exactly the kind of thing they're for. I have the exact setup you're describing at my job. I set up an intranet server where the secretaries could input client information, and then hit "submit." If they didn't fill out the form correctly, it complains at them and makes them do it over, otherwise it emails the form data to me and I input it in our database.
Php has a mail function that uses the system mailer (most likely sendmail?)
See here:
http://www.w3schools.com/php/php_mail.asp
Edited by: John_2.0 on Mar 6, 2009 9:23 PM

Custom Event Notification (email) for Approval Tasks in OIM 11g

Hi,
how to create event notification for approval tasks in OIM 11g. I mean how to send email notification to user who sholuld accept or reject approval task?
best
mp
Edited by: J23 on 2011-05-30 04:08

Here is the documentation http://download.oracle.com/docs/cd/E21764_01/integration.1111/e10224/bp_notif.htm#SOASE548
Search for SOA BPEL Email Notifications for more information:
http://soa-bpel-esb.blogspot.com/2010/01/email-notification-in-bpel.html
http://download.oracle.com/docs/cd/B31017_01/core.1013/b28764/bpel013.htm
There are many more search links that can help you out.
-Kevin

Bold 9700 .co email for Outlook Web Access

Hello, have a new domain xxxx.co and when I attempt to configure the email account for exchange outlook web access, only .com .edu .net and .org are the only available. How can I add .co to the list?
Thank you in advance. Steve

Hello Steve,
Welcome to the BlackBerry Support Community Forums
Try using the second advanced integration process as listed here:
http://www.blackberry.com/btsc/KB10154
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

GIF files not being cached for toolbar (WEB Forms)

I realized that the GIF files we are using
in our toolbars are not being cached by the
browser. I analyzed the file XLF.LOG and
the files always have access code "200"
(not cached). The file REGISTRY.DAT has
the same problem. Only the JAR file has
access code "304" (cached). Although these
GIF files are small (~900 bytes), it takes
many seconds to open each form when someone
executes our application using a low speed
line (many of our forms have toolbars
with more than 30 icons). Is there any
special configuration I have to do or this
will be corrected in future versions?
XLF.LOG (first and second execution):
#Version: 1.0
#Software: Oracle WRB Log Server
#Fields: clf
1.0.5.57 - - [24/Jan/2000:07:45:48 -0300] "GET /htm/sales HTTP/1.0" 200 1440
1.0.5.57 - - [24/Jan/2000:07:45:51 -0300] "GET /htm/ HTTP/1.0" 200 760
1.0.5.57 - - [24/Jan/2000:07:45:51 -0300] "GET /forms_code/f60all.jar HTTP/1.0" 304 0
1.0.5.57 - - [24/Jan/2000:07:45:53 -0300] "GET /forms_code/javax/swing/JInternalFrame.class HTTP/1.0" 404 99
1.0.5.57 - - [24/Jan/2000:07:45:55 -0300] "GET /forms_code/oracle/forms/registry/Registry.dat HTTP/1.0" 200 4122
1.0.5.57 - - [24/Jan/2000:07:46:06 -0300] "GET /img/PASSWORD.gif HTTP/1.0" 200 853
1.0.5.57 - - [24/Jan/2000:07:46:06 -0300] "GET /img/HELP.gif HTTP/1.0" 200 898
1.0.5.57 - - [24/Jan/2000:07:46:06 -0300] "GET /img/KEYS.gif HTTP/1.0" 200 864
1.0.5.57 - - [24/Jan/2000:07:46:06 -0300] "GET /img/EXIT.gif HTTP/1.0" 200 888
1.0.5.57 - - [24/Jan/2000:07:47:28 -0300] "GET /htm/sales HTTP/1.0" 304 0
1.0.5.57 - - [24/Jan/2000:07:47:30 -0300] "GET /htm/ HTTP/1.0" 304 0
1.0.5.57 - - [24/Jan/2000:07:47:30 -0300] "GET /forms_code/f60all.jar HTTP/1.0" 304 0
1.0.5.57 - - [24/Jan/2000:07:47:32 -0300] "GET /forms_code/javax/swing/JInternalFrame.class HTTP/1.0" 404 99
1.0.5.57 - - [24/Jan/2000:07:47:32 -0300] "GET /forms_code/oracle/forms/registry/Registry.dat HTTP/1.0" 200 4122
1.0.5.57 - - [24/Jan/2000:07:47:45 -0300] "GET /img/PASSWORD.gif HTTP/1.0" 200 853
1.0.5.57 - - [24/Jan/2000:07:47:45 -0300] "GET /img/HELP.gif HTTP/1.0" 200 898
1.0.5.57 - - [24/Jan/2000:07:47:45 -0300] "GET /img/KEYS.gif HTTP/1.0" 200 864
1.0.5.57 - - [24/Jan/2000:07:47:45 -0300] "GET /img/EXIT.gif HTTP/1.0" 200 888
null

Have you tried turning on the "File Caching" setting under the "Server" branch for you Listener under OAS?

Notification emails for received web forms

Similar Messages

Maybe you are looking for