Now I can start my Mac Pro only in "secure mode." I'm still appears on all monitors a series of bands such as seen in the attached file. Someone can give me a diagnosis? Thank you.

Now I can start my Mac Pro only in "secure mode."
I'm still appears on all monitors a series of bands such as seen in the attached file.
Someone can give me a diagnosis?
Thank you.

The attached file is not showing.
In Safe/Secure Mode many Drivers are not loaded. When your computer works in Safe Mode, but not regular mode, two types of problems are implicated:
1) Third-party kernel extensions. a conflict with some part of Mac OS X means that when those extensions load, your Mac can not run.
2) Failed graphics card. Since the Driver for the display is not loaded, the display in Safe Mode uses a very simple built-in Driver. In regular mode, once the driver is loaded, all parts of the graphics card must be working, or you could get bands of color on the display (which is just what you reported).
Which Model Mac Pro Tower or MacBook Pro is this?

Similar Messages

TS2446 I forgot the security question about what was my first car and what is my favorite car! What is the solution to change that? please help me, thank you in advance Leo

I forgot the security question about what was my first car and what is my favorite car! What is the solution to change that? please help me, thank you in advance Leo

If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address set up then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Questions' or 'iTunes Store account security' (it appears to vary by country) and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox)

Have a brand new dell. Not much on it but Premiere elements 13. Haven't used it for anything else - only 5 days old. I am in Premiere, add vid, render then poof. it says add media where those rendered files were. any help would be appreciated. thank you

Have a brand new dell. Not much on it but Premiere elements 13. Haven't used it for anything else - only 5 days old. I am in Premiere, add vid, render then poof. it says add media where those rendered files were. any help would be appreciated. thank you

bgar
On what computer operating system is your Premiere Elements 13 running on?
What are you (manually) or the project (automatically) setting as the project preset?
(See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size,
and Pixel Aspect Ratio (even if fields look grayed out).
What are the properties of these source media, including file extension? The brand/model/settings of the camera that recorded the
video may give us this information.
When the source media hit the Timeline for the first time, is there an orange line over their content? Or is there
no colored line and an orange line appears over them only after you have edited them?
Please elaborate on "poof" after rendering the Timeline content by pressing the Render button above the Timeline content with the orange line over it.
a. Media Offline displays?
b. Other?
ATR

I can boot my Mac Mini only in safe mode

I've tried recovery mode but it hangs with a blank linen screen and the pointer stuck in the top LH corner. At this point the mouse doesn't seem to be working properly the motion sensing LED doesn't flash when the mouse is moved and flashes more brightly when the mouse is clicked.
I've tried resetting PRAM and PMU and SMC but to no avail.
Selecting boot from the recovery partition just hangs.
Creating a recovery drive (USB 'stick' or USB drive) with the Recovery Disk Assistant just hangs.
I've created a 2nd partition and cloned the startup partition to it. Attempting to boot from that just hangs.
I notice, also, that the system serial number is missing; presumably it wasn't re-entered following the replacement of the logic board, recently. I hadn't noticed until now.
Any suggestions?

BDAqua wrote:
Hello, old info, but basically the same I'd think for 10.7.x...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
Hi,
Thanks for your reply. Actually, safe mode is the only thing that works (this message is brought to you by my sponsor - safe mode). If I leave recovery boot hanging it will eventualy reboot after 5-10 mins.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
Thanks for the list. I've had a look in there but there doesn't seem to be anything untoward (although, how can you tel by looking)? I have a few 3rd party preference panes but they don't seem to have caused a problem in the past. I suppose I'll have to figure out how to ininstall them one-by-one.
Incidentally, I have tried Lion Internet Recovery, too. It seems to download (presumably) the disk image but hangs when the system rebots. The recovery utilities never appear.

HT1727 i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

If you bought them on your iPad then you will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to the Tones part of your computer's iTunes library and you can then sync them to your iPhone - ringtones are a one-time only download, so you won't be able to redownload them directly on your phone.

My Mac Pro only has a 250GB hard drive. can I use my 1TB hard drive from my windows computer, they're bith SATA

my Mac Pro only has a 250GB hard drive. can I use my 1TB hard drive from my windows computer, they're bith SATA

You want system, data, backup etc. Make good use of the four internal drive bays.
You will have to use Disk Utility to ERASE or click on drive and use PARTITION to make it Mac writeable.

I get the blue screen loop when I try to start my Mac Pro dual-core intel computer. How can I get it to open?

I get the blue screen loop when I try to start my Mac-Pro. How can I get it to boot up all the way? Can anyone advise me?

Which OS X is installed?
Troubleshooting advice can depend on that information.

HT3625 Hello, If my mac pro only has a "Internal Microphone/Built-in Input" but no "Line In/Built-in Input." where can I get this option?

Hello, If my mac pro only has a "Internal Microphone/Built-in Input" but no "Line In/Built-in Input." where can I get this option?

Mosidun 3.5mm Male to Female Audio Cable for iPhone

HT204053 Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

Hi, how can I set up icloud for my ipad and iphone5? I missed tout he initial setup step and now want to have both the devices under icloud. Please help...thank you!

Go to Settings>iCloud and sign in with your Apple ID to create the account. Then turn on the data you wish to sync with iCloud. See http://www.apple.com/icloud/setup/ios.html.

HT1209 I have a music collection on my iPod (160GB Classic). I have that collection on my old Mac Book. Now I have a new Mac Pro and want to transfer the collection to the new Mac Pro, is that doable?

I have a music collection on my iPod (160GB Classic). I have that collection on my old Mac Book. Now I have a new Mac Pro and want to transfer the collection to the new Mac Pro, is that doable?

Thanks roaminggnome. Can I do that transfer wirelessly or do I have to get a large jump drive to copy and transfer. I presume that I cannot use my iPod right?

Can I use Mac Pro as a Mainframe to serve 10 PCs?

I need to furnish a Mac lab, and I thought if I can use a Mac Pro with 12 core, to serve 10 PCs.
Anybody can help me in this issue?
Thanks...

Mac OS X Server does not require a lot of compute power, it requires a lot of high-speed I/O. A separate Boot Drive, multiple data drives (mirrored RAID optional), and Gigabit Ethernet connections to the Workstations.
A Mini bears consideration, but its laptop-type drives may not provide adequate speed if you intend to keep all user files on the Server.
Time Machine can be used to back up the Server drives, and therefore all the User files, automatically from the central location of the Server.
One pleasant side effect of all user files on the Server is that any workstation can go out for service without taking any User files with it. And any User can use any workstation, since their files are instantly available once they connect to the Server.

My Mac Pro ONLY Boots up in safe mode

My Mac Pro hangs in boot mode forever (screen after the Gray Logo Screen). I'm unable to use the recovery partion, or boot from USB installation. I did all the usual troubleshooting e.g. reset SMC, NVRAM, etc. I tested the boot drive externally on an iMac and boots just fine. I checked the permissions running Disc Utility and get a lot of the "display" plists have the wrong permission settings. Does this mean my graphics card is bad? The Mac Pro is the stock 2006 model, 2.66 Ghz QuadCore Xeon with 2GBs or RAM.

Thanks for your help Grant Bennet-Alder. I've tried this as well. When I boot up holding the Option key, the screen shows both the Recovey_HD and the Boot Volume graphically. Whether I choose by clicking on the Recovery_HD or the main Boot Volume the same thing happens - the screen after the Gray Apple Logo Screen. I tried booting by this same method with my old installation discs that came with the Mac Pro to see if I can just install a new System folder and it triggers the Kernel Panic screen (See Below - Grayed out screen with Black Pop Up saying "You Need to Restart Your Computer..." Seems I can't even restore my Mac.

Can dual socket Mac Pro 3,1 (2008) use two X5470?

1. Can dual socket Mac Pro 3,1 (2008) use two X5470?
2. And can dual socket Mac Pro 4,1 (2009) use two X5675?

All I can tell you is that the 2009 Nehalem might be somewhat upgradeable, but the Mac Pro 3,1 I believe, has an X53XX socket. The 2009 might have used either Westmere, Harpertown or Cloverdale/gainestown(???) processors. See this URL for more info.
http://www.anandtech.com/show/2800/upgrading-and-analyzing-apple-s-nehalem-mac-p ro
also, see this
http://eshop.macsales.com/shop/turnkey/MacPro/2010_Xeon_Processor.
Please note that this applies only to the 4,1 (2009) Mac Pro, not the 2008 one. My advice to you, sir, is to find an independent mac Tech who would better be able to tell you if that's possible. If I were a betting man, I'd say "no" to question 1, and "probably not, but I might be wrong" to question 2
JB

TS1363 I used to sync my iphone to a laptop which is no longer in my posession. I am now looking to start over and have a new itunes on my pc with no music on it. When i connect my iphone up to the new itunes it doesn't recognise it or sync - can anyone h

I used to sync my iphone to a laptop which is no longer in my posession. I am now looking to start over and have a new itunes on my pc with no music on it. When i connect my iphone up to the new itunes it doesn't recognise it or sync - can anyone help me?

The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.

I have a Mac Pro with four hard drives. I currently have Lion installed on one hard drive. I want to have the option to boot from either Lion or Snow Leopard. How can I do this?

I have a Mac Pro with four hard drives. I currently have Lion installed on one hard drive. I want to have the option to boot from either Lion or Snow Leopard. How can I do this?

It's best to install Snow Leopard on one of the three remain drives without an Operating System.
You can then install the applications you need from the original media. Create a User Account using Setup Assistant.
Do you want to migrate User Accounts from the OSX LIon boot drive, or are you keeping the User Accounts separate?
Dual-booting just requires holding the option key during startup and selecting either Lion or Snow Leopard.

Now I can start my Mac Pro only in "secure mode." I'm still appears on all monitors a series of bands such as seen in the attached file. Someone can give me a diagnosis? Thank you.

Similar Messages

Maybe you are looking for