NPRT Logs shows only header table

Hi Experts,
I have a doubt regarding the details displayed in Transaction NPRT. After Setup tables are filled for Delivery-02, when I checked the logs through NPRT, I got the source table as LIKP.
Now I understand that LIKP is the Delivery Header data but Setup table filling extracts both header and item data so why only the header table, LIKP, is displayed and not the item table, LIPS?
Please help me understand the concept better.

Hi
Normally while filling up setup tables. It will full entire application (all the tables of particular application) if those are updated. Try to Run V3 Collective Run properly.
You can see the No.of Records filled in RMCEX_SETUP_ENTRIES
hope it helps.

Similar Messages

SCEP - NDES: CRP.log shows only "Perf Test Hook, Challenge is read from registry"

Hi,
i exactly did the installation and configuration as described here:
http://blogs.technet.com/b/tune_in_to_windows_intune/archive/2014/04/25/part-2-scep-certificate-enrolling-using-configmgr-2012-crp-ndes-and-windows-intune.aspx?pi47623=2#pi47623=1#comments
However, CRP.log shows only "Perf Test Hook, Challenge is read from registry" and nothing happens, no certs gets deployed.
In addition i don't see any errors in the logs?
Any suggestions?
Is its neccessary to allow any to any communication from NDES Server (in DMZ) to SCCM?
Thanks.
Regards,
ckuever

Hi Björn,
sure, but which ports exactly? Any?
regards,
ckuever
Domaintraffic ports is RPC Highports, TCP/UDP135, TCP445 and for the webservice https/443.
Site Server < -- > Certificate Registration Point
Description
UDP
TCP
Server Message Block (SMB)
445
RPC Endpoint Mapper
135
135
RPC
DYNAMIC (See note 6, Dynamic ports)

AppleScript Editor -- Event Log shows only Result

The Event Log pane at the bottom of the AppleScript Editor window shows only the result after I run a script, regardless of whether I choose the "Result" button or the "Events" or "Replies" buttons. I've only recently begun consulting the Event Log regularly, so maybe I'm not completely familiar with how it's supposed to work. But I'm fairly certain that, until yesterday, after I ran a script, the Event Log would show a detailed log of the script in action, and if I clicked on the "Replies" button, it would also show the result of each line. Isn't that how it's supposed to work?
For example, if I run this script:
tell application "Finder"
get version
end tell
In the bottom pane, with "Events" and "Replies" selected, all I see is this:
Result:
"10.8.2"
Shouldn't I see more than that? I'm sure that in the past I've seen actual lines from the script in that window.
Thanks.

The Events button will show Apple Events such as tell statements and display dialog commands, while the Replies button will show the reply to those events. The Result button just shows the result of the script, which is the value returned (or the last value of the (internal predefined) result property).
The Events History window isn't really meant to be a debugging console, but you can also add your own entries there by using the log command.

JDBC Receiver: updates only header table how to update detail

Hi
here the scenario idoc having one header and one details segments, header data goes to one sql table detail date to another sql table.
i created the sql structure   in two ways one
table name
insert table
     header table
        action
        access
        detail table
            action
            access
2nd
table name
insert table
     header table
        action
        access
     detail table
        action
        access
in both ways one header table is updating detail table not. please help how to data will go in both tables
thanks
Message was edited by: sri rao

Hi,
could you pls try something like this..i was reading the documentation and thought of asking you to try this..
<root>
<HDR_StatementName>
<hdrtablename action=INSERT>
<table>hdrtablename</table>
<access>
<hfield1>val1</col1>
<hfield2>val2</col2>
</access>
</hdrtablename>
</HDR_StatementName>
<ITM_StatementName>
<itmtablename action=INSERT>
<table>itmtablename</table>
<access>
<ifield1>val1</col1>
<ifield2>val2</col2>
</access>
</itmtablename>
</ITM_StatementName>
</root>
Thanks & Regards,
Renjith

Geometry Tables on MapBuilder show only 5 tables of 25 tables with sdo

Hi,
I have 25 tables with sdo column and data in my database. But I can only see 5 tables under directory Geometry Tables on MapBuilder. Why can other tables not be displayed? Any idea???
Thank you

Yes, manually! Assuming your data is long/lat srid 8311:
INSERT INTO USER_SDO_GEOM_METADATA (
table_Name, column_name, srid, diminfo
) values (
'MISSING_TABLE1','GEOM',8311,MDSYS.SDO_DIM_ARRAY(
MDSYS.SDO_DIM_ELEMENT('X',-180,180,0.005),
MDSYS.SDO_DIM_ELEMENT('Y',-90,90,0.005))
);<shameless_plug ignore_level="HIGH" contact_email="simon at spatialdbadvisor dot com">
On my website (http://www.spatialdbadvisor.com/file_download/18) there are some free downloadable pl/sql tools. In these tools there is a package called TOOLS which has a procedure as follows:
   Procedure MetadataAnalyzer( p_table_regex             IN VARCHAR2 := '*',
                               p_fixed_srid              IN NUMBER   := -9999,
                               p_fixed_diminfo           IN MDSYS.SDO_DIM_ARRAY := NULL,
                               p_spindex_tablespace      IN VARCHAR2 := NULL,
                               p_spindex_work_tablespace IN VARCHAR2 := NULL,
                               p_pin_non_leaf            IN BOOLEAN := FALSE,
                               p_stats_percent           IN PLS_INTEGER := 100,
                               p_min_projected_tolerance IN NUMBER := 0.00005 );Which you would execute from sqlplus as follows (assume the package is installed in the CODESYS schema):
SQL> execute codesys.TOOLS.MetadataAnalyzer;It will discover your tables with sdo_geometry columns and try and construct user_sdo_geom_metadata entries for them via querying user_tab_columns. It will also build spatial indexes and ensure database statistics are gathered.
Try it and see if it works for you. If you have problems, just email me for help.
</shameless plug>
regards
Simon

Signed apk file shows only header when run - the rest of the screen is blank

Hi
I have
built a folio for Android app.
published the folio
Used DPS app builder to build the app
used terminal to build the keystone
Use the DPS Tool to sign the app
I transferred the apk file to the Android device and installed it - it installs fine
When the app opens all that can be seen is the icon of the app in the top left corner of the screen and a menu tool, top right corner for Settings and About
The screen where the app should be showing is completely black.
The DPS App builder screen still shows that the app is unsigned, as shown below.
The other thing that is weird, I think, is that the apk file created is 3.6 megs large, while the files in the folio are quite large and on the iPad the app is 500 megs.
I guess I have three questions:
1. What am I missing that the screen comes up black on the tablet?
2. Why does the DPS app builder show that the app is still unsigned.
3. Shouldn't my apk file size match the size of the folio?
Thanks for your help
Deb

You need to:
1) Publish the folio as free
2) Put the app in the store as a paid app
Then people have to pay to download the app, but once they have it they can download the folio at no charge.
I suggest reading this blog entry from Bob Levine that explains the difference between Single Edition and multi-issue applications. On Android and Windows you must create a multi-issue application.
http://boblevine.us/digital-publishing-suite-101-single-edition-vs-multi-folio-apps/
Neil

Access ODBC link table list ONLY one table

Hi all,
I try to link Oracle tables from Microsoft Access via Link Table. The return list show ONLY one table, which by right it should show ALL tables in my Database.
What is the problem here? Anyone encounter this same problem before.
My database is very large, over 10,000 tables. Can it be because of resources issues?
Pls help

Are they all real tables are or some of them perhspa VIEWS, SYNONYMS or the like? The default list is for just tables. I have seen cases where a really large list would make Access puke, but this generally results in getting nothing listed.

Table header row to show only on even pages

Within a table I have made few of the rows as header row. Is there any way I can make this header row to show only on even pages..I tried doing this at the beginning of each header row <?if:(fo:page-number) mod 2=0?>..but its' not showing me anything..

Thanks that helped..But I am having another problem. I want to call different templates in the even header section... based on the page number...for example..for
page 2 of 2, I want to call template1 in the even page,
page 2 of X, I want to call templete2 in the even page,
Can you please help..?

PDF showing only first line of Table?

Hi @,
I am showing an input table to PDF using adobe Int Form and in the Adobe screen it is displaying only the first line of the table.
I am using CE 7.1 SR5.
Regards

Hi,
When the XML interface is generated for the context, for every node that has cardinality 0..n or 1..n, a node named DATA is generated in the XML.
So if your Webdynpro context has foll structure...
Node1 ... 1..1
Node2 ... 0..n
    Attrib1
    Attrib2
The corresponding XML would be
Node1
Node2
    DATA
      Attrib1
      Attrib2
Regards,
Reema.

My emails show only the header and no content or attachments ?

My emails show only the header with no content or attachments on my iPad?

Quit the mail app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

In Pivot table how to show folder heading of a Measures column

Hi gurus
I am using 11.1.1.6.6 version
Any idea how to show column heading of a measure column in Pivot table view.
for Dimension its working fine
I have 3 dimension column and 12 measure column in my report

Hi Santosh Sutar,
Did you mean that you want to hide/show the rows in an worksheet? If I understood correctly, there is no such API in apps for Office at present. Most of functions are used interop with data.
If you want apps for Office to support this function, I suggest that you submit the feedback from link below:
Customer Feedback for the Office Developer Platform
And you get learn more about apps for developing from link below:
Build apps for Office
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Log data changes for only a table

Hi,
We know that to read log modification from a table we need to set the client on system parameter rec/client and also set flag in settings table from transaction SE13. But we do not want to set log for all tables in system only for one for table T001B.
Any suggestion?

Another option would be to only make changes to T001B and accept the defaults... no other logs will be written
You might also want to take a look into the "recclient" parameter (without "/") in the transport profile.
Anyway, I think you are concerned about a performance urban legend? Application data generally has it's own logs (CDHDR, etc) which are not related to this, and you mostly cannot turn it off anyway.
Cheers,
Julius

SelectOneChoice Lov in Table readOnly show only ID when export to Excel

Hi, I put a af:selectOneChoice readOnly Lov in a table to bring the DESCRIPTION of the ID in a foreig key relation, it do it well in the browser, but when I want to export to EXCEL it show only the ID of the related table.
How can I fix it to show the DESCRIPCION in the exported excel?
Tx in advance

If I make it in this way, I gonna have two columns one just for the description and other for the combo, maybe in the future I need to make it editable/readonly and thats the reason I only need the combo, but when I want to export to excel it show the id.
The error(maybe not) is because the ADF's programmer who make the excel command go for the iterator and not for the table's gui.

LST No/CST No is not showing in Excise Header table

Dear All,
I am facing one problem that i maintained the LST No.(J_1ILSTNO) and CST No(J_1ICSTNO) in transaction J1ID -customer master excise additional data against the customer code but when i am creating the Excise invoice for that customer then in excise header table (J_1iexchdr )the LST No(LSTNO)/CST No (CSTNO) is not showing or not getting updated ?
any reason why it is not getting updated in excise header table?
warm regards
ravi k

HI
it was a typo error the table is J_1IEXCHDR
check the customer master and also check whether they are coming in excise invoice
also check this Note 1048759 - CST, LST, PAN no. of customer not filled in J1IIN
regards

How can I make the title of a table show in header?

I would like to have my table name show in the table. Ideally I would like to have the title of the spreadsheet sync with either info or a textbox within a sheet.

Hi Jaron,
If you do not need/want to save the information from previous weeks in a single document, your easiest solution is likely to make a two table document following Badunit's suggestion regarding titling the table using the first date entered in the main table.
In the main table, you'd use column A to record the dates worked, columns B and C to record start and end times on those dates, and column D to calculate the number of hours worked in that time period. Formula: =DUR2HOURS(C-B)
A footer row could be used to sum the hours in column D with the formula =SUM(D)
Enhancements to the formulas can be made to keep the cells in D 'empty' until times are entered in columns B and C of that row.
When the table is complete, empty the data and Save the document as a Template.
Each week, open the template, Name and Save the document, then enter the starting date. At the end of the week, print the document, then Save it as that week's time sheet.
Follow the same procedure each week.
If you need/want to save a continuous record of the times you worked over a longer period, make a duplicate of the Main table above (omitting the small table used to title the main table), and use this duplicate, placed on a second sheet, as your Data table.
This method requires re-writing the Main table using formulas that will extract one week's data from the Data table, starting with the date entered in cell A2 (as in Badunit's example).
The formulas to use will depend on the arrangement of data in your Data table:
Is the working time a single continuous period for each day worked, or can it be more than one period, with breaks in between?
If the latter, are the periods recorded on a single row for each date, or on multiple rows, one period to each row?
Is there an unpaid break (of fixed length) within each period? within each period longer than a specified duration?
Using a document of this type would require recording the data for each day on the Data table, then, when the time sheet for the week is to be submitted, go to Sheet 1, and enter the starting date for that week in B2 of Main. When the results have been calculated, Print page 1 only.
If interested in this route, you'll need to provide more detail regarding the layout of your data as recorded. True also, for suggestedrevisions to the formulas given above for the weekly document from a template route.
Regards,
Barry

NPRT Logs shows only header table

Similar Messages

Maybe you are looking for