NQSError 14020 When Running Cross-Fact Query

I keep getting the following error when trying to run a cross-fact query in OBIEE Answers:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request D3.X. (HY000)
I set up a whole new RPD with only 4 tables, and made sure all the content levels were set up correctly, but I'm still getting the error. I have the following setup:
Physical
I have 2 fact tables and three dimensions
F1 <- D1, D2
F2 <- D2, D3
BMM
I have one fact tables and three dimension tables:
F <- D1, D2, D3
I created a dimension higherarchy for each dimension table and kept the two default logical levels --Total and Detail.
Each dimension table has a single LTS set to the "Detail" level.
The fact table has two LTS, and the levels are set up as follows:
F1: D1=Detail, D2=Detail, D3=Total
F2: D1=Total, D2=Detal, D3=Detail
Answers
I'm trying to run the following request in OBIEE Answers: D1.x, D2.x, D3.x
Could anyone could point me in the right direction?
- Tim

Hi Tim,
In your query, do you just have the dimensions? How about having measure in that report and checking if you still have the same error.
I see your LTS settings fine (as you have merged the individual facts to one in BMM). Generally, query across dimensions have to go through the fact to resolve the relations and so in here, it has to go through different facts though ;) . Could you post your query so that we can have a look?
Thank you,
Dhar

Similar Messages

Frm-92100 due to heartbeat when running a large query

Hi,
I have trouble running long queries in the following setup:
* Forms 10g
* Oracle-AS 10.1.2.0.2
* Oracle DB 9.2.0.6.0
* JInitiator: Version 1.3.1.22
* I can run the application fine for about 1.5 minutes. Doing long queries (~ 0.5 minutes) with no problems. But when I run a long query so that it runs at 1.5 minutes after starting the Client Session, it will break with an FRM-92100.
My definition of long queries in this case is: 'not done in an instant'.
I get the following Java Console output, which suggests to me, that the heartbeat can't be processed properly:
Dump classloader list ...
codebase=http://localhost:8889/forms/java/, key=http://localhost:8889/forms/java/,frmwebutil.jar,jacob.jar, zombie=false, cache=true, info=sun.plugin.ClassLoaderInfo@35282
codebase=http://localhost:8889/forms/java/, key=http://localhost:8889/forms/java/,frmall_jinit.jar,jfreechart-1.0.1-demo.jar,jcommon-1.0.0.jar,jfreechart-1.0.1.jar,eccBeans.jar,frmwebutil.jar,jacob.jar,frmwebutil.jar,jacob.jar, zombie=false, cache=true, info=sun.plugin.ClassLoaderInfo@61899b
Done.
Dump thread list ...
Group main,ac=33,agc=3,pri=10
main,5,alive
AWT-EventQueue-1,6,alive
SunToolkit.PostEventQueue-1,6,alive
AWT-Windows,6,alive
Thread-1,5,alive
Thread-2,5,alive
Screen Updater,5,alive
Thread-5,5,alive
Group Plugin Thread Group,ac=4,agc=0,pri=10
AWT-EventQueue-0,6,alive
SunToolkit.PostEventQueue-0,6,alive
Main Console Writer,6,alive
TimerQueue,5,alive,dameon
Group http://localhost:8889/forms/java/-threadGroup,ac=3,agc=0,pri=4
AWT-EventQueue-2,4,alive
SunToolkit.PostEventQueue-2,4,alive
thread applet-oracle.forms.webutil.common.RegisterWebUtil,4,alive
Group http://localhost:8889/forms/java/-threadGroup,ac=18,agc=0,pri=4
AWT-EventQueue-3,4,alive
SunToolkit.PostEventQueue-3,4,alive
thread applet-oracle.forms.engine.Main,4,alive
Keep-Alive-Timer:,4,alive,dameon
Forms-StreamMessageWriter,1,alive
TaskScheduler timer,4,alive
CursorIdler,4,alive
TimerQueue,4,alive,dameon
Forms-DialogThread4,4,alive
Done.
I'm also getting this in the application log: (sorry, part of that is german, but I understand some of you won't have trouble understanding it anyway ;-)
07/01/29 18:55:50 formsweb: Forms-Session <1> abgebrochen: Kommunikation mit Runtime-Prozess nicht möglich.
07/01/29 18:55:50 formsweb: Forms session <1> exception stack trace:
com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpIOException: Software caused connection abort: socket write error
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.EvermindServletOutputStream.write(EvermindServletOutputStream.java:250)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.EvermindServletOutputStream.write(EvermindServletOutputStream.java:151)
     at oracle.forms.servlet.ListenerServlet.sendDataFromRunform(Unknown Source)
     at oracle.forms.servlet.ListenerServlet.forwardResponseFromRunform(Unknown Source)
     at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
07/01/29 18:55:50 formsweb: Software caused connection abort: socket write error
07/01/29 18:55:50 formsweb: Software caused connection abort: socket write error
07/01/29 18:55:50 formsweb: Software caused connection abort: socket write error
* Due to that I extended the heartbeat frequency. I didn't get the FRM-92100 any more, but then the server process dies. I see the query disappear in the Database ahead of time.
* So I extended the forms_timeout parameter, but that didn't do any good.
Anyhow, extending the heartbeats won't really do me any good, because we have processes that last 18h. And they are started from within a Forms session (we are currently migrating from Forms 5).
* Does anybody have ideas, why long queries could interfere with the heartbeat functionality?

Yes, I have spent two days on that. Maybe you can give me a hint on how to get more log information

Error when running a parameterised query

I get an error when trying to run the following parameterised query :
/SELECT FROM [@Payments] p/
declare @fromAccount as nvarchar(10)
/* WHERE */
set @fromAccount = /* p.U_account */ N'[%8]'
SELECT T1.[CardName], T0.[Code], T0.[U_code_ast], T0.[U_str_date], T0.[U_end_date], T0.[U_area], T2.[U_account], T2.[U_lnk_type], T2.[U_lnk_base], T2.[U_base_val], T2.[U_total], T2.[U_total] / case T0.[U_area] when 0 then T2.[U_total] end as square_price FROM [dbo].[@CONTRACTS] T0 LEFT JOIN [@PAYMENTS] T2 ON T2.Code = T0.Code , OCRD T1 WHERE T1.[CardCode] = T0.[U_client] and T0.Code <= [%0] and T0.Code >=
[%1] and T0.U_code_sit >= [%2] and T0.U_code_sit <= [%3] and T0.U_code_bld >= [%4] and T0.U_code_bld <= [%5] and T0.U_code_flr >= [%6] and T0.U_code_flr <= [%7] and T2.U_account >= @fromAccount
the error message i get is:
"(SEWSY)".
what is the meaning of this message and how can the error be solved?
appreciate the help
Yoav

if you cut and paste this query into sql query analyzer and replace the parameters with values and then run the query what do you get?
I find it easier to develop my queries in sql query analyzer and then copy them to B1.

Linked Server - Getting Error when performing Cross Instance Query with joins

Hi Guys,
I've successfully created a Linked Server that connects a local DB Engine with another DB Engine through an ip over an extranet. I am able to run simple Select statement queries on the Local DB
Engine and get results from the linked server. However when attempting to perform more complex queries that join tables from
the linked server with tables from the local DB server, I get the following error message after several minutes of execution:
OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>" returned message "Protocol error in TDS stream".
OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>"
returned message "Communication link failure".
Msg -1, Level 16, State 1, Line 0
Session Provider: Physical connection is not usable [xFFFFFFFF].
OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>"
returned message "Communication link failure".
Msg -1, Level 16, State 1, Line 0
Session Provider: Physical connection is not usable [xFFFFFFFF].
OLE DB provider "SQLNCLI11" for linked server "<ip of Linked Server>"
returned message "Communication link failure".
Msg 10054, Level 16, State 1, Line 0
TCP Provider: An existing connection was forcibly closed by the remote host.
Grateful if you could advise what may be causing this issue and how I can resolve it. I've read on Distributed Transactions but I understand that it only applies to manipulation statements?
Both are SQL servers. Linked Server is SQL2008R2 if not mistaken. Local DB Engine is SQL2014.
Thanks and Regards,
Rhyan.

Thank you for your insight Erland. Can you advise how I can check the SQL Server errorlog pls?
I just got word from a user that the query ran successfully this morning but took 15 mins to complete.. does it ring a bell to you in terms of issues that may be causing this?
This kind of behaviour would suggest something makes the query "time out" or stop abruptly.. How can I further investigate it pls? Can a BEGIN DISTRIBUTED TRANSACTION statement in the query help me mitigate or resolve the error? ref: https://msdn.microsoft.com/en-us/library/ms188386.aspx?f=255&MSPPError=-2147217396
SQL Version for Remote Server is :
Microsoft SQL Server 2012 (SP1) - 11.0.3000.0 (X64) Oct 19 2012 13:38:57 Copyright
(c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
SQL Version for Local Server is:
Microsoft SQL Server 2014 - 12.0.2000.8 (X64) Feb 20 2014 20:04:26 Copyright
(c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: ) (Hypervisor)
Thanks and Regards,
Rhyan

Error when running a workbook/query Acritical program error has occured

Hi Gurus,
Acritical program error has occured,The program will now terminate.
When the User opens the workbook , it is opening and getting hanged for long time and throughing a message as
Acritical program error has occured,The program will now terminate.
Our system details :
SAP Release 710, Version 7100.3.11.3115
Pls let us know do we need to go for higher vresion / any patches still required to Update .
Thanks in Advance

Hi Guru,
The User is using latest GUI 720 , sorry i mentioned as 710 GUI .
Pls let me know if any Patches are required to update

Finding this error when running the below query - Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.

select
min(h.[Spcl Order]),
(select (case when sum(pro.[Quantity]) is null then 0 else sum(pro.[Quantity]) END))
+
(select (case when sum(A.[Quantity]) is null then 0 else sum(A.[Quantity]) END),
min(b.[Posting Date]),min(c.[Order No]),min(d.[Prod_Order No]),min(e.[No]),
min(f.[Item Category Code]),min(g.[Location Code]),min(i.[Spcl Order_Purch])
from [tablename2] A
inner join [sample].[dbo].[Posting Date_PRL] as b on a.[Posting Date]=b.[Posting Date]
inner join [sample].[dbo].[Order No_PRL] as c on a.[Order No_]=c.[Order No]
inner join [sample].[dbo].[Prod_ OrderNo_PRL] as d on a.[Prod_ Order No_]=d.[Prod_OrderNo]
inner join [sample].[dbo].[No_PRL] as e on a.[No_]=e.[No]
inner join [sample].[dbo].[Item Category Code_PRL] as f on a.[Item Category Code]=f.[Item Category Code]
inner join [sample].[dbo].[Location Code_PRL] as g on a.[Location Code]=g.[Location Code]
inner join [sample].[dbo].[Spcl Order_PRL] as i on a.[Spcl Order]=i.[Spcl Order_Purch]
where ((A.[Item Category Code] = 'STYLES') and (A.[Prod_ Order No_]='') and ( A.[Buy-from Vendor No_] in ('S02052')) AND (A.[Quantity]>0)
AND ( A.[Posting Date] = pro.[Finished Date])))
from [tablename1] pro
inner join [sample].[dbo].[Spcl Order_PO] as h on Pro.[Spcl Order]=h.[Spcl Order]
where ((pro.[Status]=4) and (pro.[Finished Date] ='2013-10-10' )) group by pro.[Finished Date]

As other suggested, please find the column list...there are many columns in your subquery...
eg:
Select *,(Select 1,2) From (Values(1),(2))A(MonthID) -- will not work
where as
Select *,(Select 1) From (Values(1),(2))A(MonthID) --will work
Your case:
select
min(h.[Spcl Order]),
(select
(case when sum(pro.[Quantity]) is null then 0 else sum(pro.[Quantity]) END))
+
(select (case when sum(A.[Quantity]) is null then 0 else sum(A.[Quantity]) END),
min(b.[Posting Date]),min(c.[Order No]),min(d.[Prod_Order No]),min(e.[No]),
min(f.[Item Category Code]),min(g.[Location Code]),min(i.[Spcl Order_Purch])
from [tablename2] A
inner join [sample].[dbo].[Posting Date_PRL] as b on a.[Posting Date]=b.[Posting Date]
inner join [sample].[dbo].[Order No_PRL] as c on a.[Order No_]=c.[Order No]
inner join [sample].[dbo].[Prod_ OrderNo_PRL] as d on a.[Prod_ Order No_]=d.[Prod_OrderNo]
inner join [sample].[dbo].[No_PRL] as e on a.[No_]=e.[No]
inner join [sample].[dbo].[Item Category Code_PRL] as f on a.[Item Category Code]=f.[Item Category Code]
inner join [sample].[dbo].[Location Code_PRL] as g on a.[Location Code]=g.[Location Code]
inner join [sample].[dbo].[Spcl Order_PRL] as i on a.[Spcl Order]=i.[Spcl Order_Purch]
where ((A.[Item Category Code] = 'STYLES') and (A.[Prod_ Order No_]='') and ( A.[Buy-from Vendor No_]
in ('S02052')) AND (A.[Quantity]>0)
AND ( A.[Posting Date] = pro.[Finished Date])))
from [tablename1] pro
inner join [sample].[dbo].[Spcl Order_PO] as h on Pro.[Spcl Order]=h.[Spcl Order]
where ((pro.[Status]=4) and (pro.[Finished Date] ='2013-10-10' )) group by pro.[Finished Date]

NQSError: 14020 : Fact Table Incompatible with Query Request

Hi All,
I am trying to add a new join to existing fact and dimension tables.
These tables are already part of some star schemas.
Now when I add the join , RPD doesn't show any consistency errors/warnings but when I create an analysis in OBIEE 11g, Measure from fact shows only null.
When I looked at the log, the physical query just has a select statement querying the dimension table and following message :
"COUNT converted to NULL because [nQSError: 14020] None of the fact tables are compatible with the query request COUNT:[DAggr(CF_FACT1.COUNT by [ CD_DATE_4.DATE_KEY.. "
Has anyone encountered similar problem ?
Few threads spoke about settign the content level but its not set for any date dimension we are using but it still works. Facing this problem only for the new join I am trying to add now.
Thanks for any pointers
Sujana

Back up your repository before following these steps:
1 Reduce the problem report to minimum number of columns required to generate the error. This will usually identify which dimension and which fact are incompatible.
2 Open the repository in the Administration tool and verify that the dimension and fact table join at the physical layer of the repository
3 Verify that there is a complex join between the dimension and the fact in the business layer.
4 Check the logical table sources for the fact table. At least one of them must have the Content tab set to a level in the hierarchy that represents the problem dimension. This is usually the detailed level.
5 Check the logical table source Content tab for the dimension table. Unless there is a valid reason, this should be set to blank.
6. Save any changes to the repository.

Non-conformed dimension [nQSError: 14020]

Hi,
I have linked two cubes in a report, which have some conformed and some non-conformed dimensions. I have set the LTS of the non-conformed dimensions to the total level.
This creates a warning in Administrator when doing the Global Consistency check:
*[39054] Fact table "ORACLE_BUSINESS_INTELLIGENCE_1"."CubeXXX" is not joined to logical dimension table "ORACLE_BUSINESS_INTELLIGENCE_1"."DIM_XXX". This will cause problems when extracting project(s).*
What does 'extracting projects' mean here ???
And when I run a report on the two fact tables I get an error in the logs
*...converted to NULL because [nQSError: 14020] None of the fact tables are compatible with the query request*
Am I missing something or is this related to the rumor that non-conformed dimensions are broken in 11.1.1.3 ?
Regards,
Knut

Below is some useful and related information from oracle about OBIEE 11g warnings during consistency check:
Warning: [39055] Fact table "HR"."FACT - HC Budget" is not joined to tables in logical dimension "HR"."DIM - HR EmployeeDim". This will cause problems when extracting project(s).
Description: Even though this fact logical table source has an aggregate grain set in this dimension, no valid physical join was found that connects to any logical table source in this dimension.
This means that either no join exists at all, or it does exist but is invalid because it connects a higher-level fact source to a lower-level dimensional source. Such joins are invalid and ignored by the Oracle BI Server because, if followed, they would lead to double counting in query answers.
For example, consider Select year, yearlySales. Even if a join exists between monthTable and yearlySales table on yearId, it cannot be used because such a join would overstate the results by a factor of 12 (the number of months in each year).
All three of the given validation rules are related to the same issue.
Please read through the above text to see if it will help with your issue.
Thanks,
-Amith.l

Logical Column based on expression leads to nQSError: 14020

Hallo everbody,
I've got two dimensions D01, D02 and a fact table F.
In Answers I have created analysises before containing D01.A and D02.A without problems.
Now, in the rpd-file, I added another logical column to dimension D01, say D01.B, which is based on an expression of type "SOME_FUNCTIONS(D01.A))".
If I drag D01.B and D02.A into an analysis I get the error message: nQSError: 14020 "None of the fact tables are compatible with the query request..."
What is the problem here? I don't quite understand what is going wrong here, as I only used some functions on a colum that is working...
Thanks for any help.
Best regards
Matt

Exactly. As I wrote, B contains some functions (mainly SUBSTR and CAST) that depend on other columns from the same dimension (all other colums are physical).
Funny thing is, when I drag D01.B into the analysis alone, it works all fine... Adding a measure also leads to the said error.

Problem of running the jump query from the result line

Dear expert,
I have a problem when running a jump query from the result line. Apparently, the values of the caracteristics haven't been sent to the jump target. However, the configuration in RSBBS seems to be good as the jump works well from the other lines.
Does anyone have some ideas on that?
Thanks in advance!

Hi,
If you are supposed to bring across characteristic values to your target, then you will not be able to jump from the result line. The configuration expects that the values of the characteristic marked as being used in the jump are filled with unique values. When you use the result line as a source for your jump, the values in the result line will most likely be based on the sum of multiple characteristic values.
Hth,
-Jacob

Getting the MDX query select error when running a webi report on BI query

Getting the following error when running a webi report on BI query :
A database error occured. The database error text is: The MDX query SELECT { [Measures].[D8JBFK099LLUVNLO7JY49FJKU] } ON COLUMNS , NON EMPTY [ZCOMPCODE].[LEVEL01].MEMBERS ON ROWS FROM [ZTEST_CUB/REP_20100723200521] failed to execute with the error Unknown error. (WIS 10901).
I have gone through many threads related to this error. But not able find the steps to follow for resoultion.
Please help in this regard.
Thanks,
Jeethender

The Fix Pack is also for Client Tools--it is a separate download. Please see the text below for ADAPT01255422
ADAPT01255422
Description:
Web Intelligence generates an incorrect MDX statement when a characteristic and a prompt are used.
The following database error happens: "The MDX query ... failed to execute with the error
Unknown error (WIS 10901)."
New Behavior:
This problem is resolved.
This information is also available in the Fixed Issues document for any Fix Pack greater than 2.2.

BW Server Error when running Query in BEx Analyzer

Hi All,
We are currently trying to run a custom Consolidation query in Bex Analyzer but coming across this error below.
We are on BI 7.0 (SAP NetWeaver 2004s), BEx Analyzer 2004s Release, Support Pack 9, Patch 4, Revision 372.
This error message is only occuring for certain custom consolidation queries and not all and does not occur for standard queries.
Does anyone have any advice?
Cheers,
Wiki
<b>ERROR MESSAGE</b>
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program CL_RSR_RRK0_SELECTION and form COLLECT_CHAFIX-02-(see long...)
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.

Hi Wiki,
I am running into this error also. You marked the question as answered, did you apply the notes or did you find any alternate solutions?
Thanks,
Vedant

"SYSTEM_FAILURE" error message when running BEX query

Hello,
I often encounter this error when I run BEX queries (take note that I encounter this error after I have already entered the query values). But when I run the same query in a later time, the query becomes successful, which makes the problem intermittent. I only encounter this when running BEX but I don't encounter such error when I'm running the query in RSRT and displaying it in SAP instead of in Excel. I hope you have any idea about this. Thank you.

Hi Lee,
Check transaction ST22 or SM21 after you get that message.
Hope this helps.
regards,
Diego

Query filtering rows in the ViewObject but works fine when run in sql

Hello,
The below query returns 8 rows when run in SQL Plus but the same query when used in the viewobject, its only returning 4 rows. I tried in all possible ways but not sure what's happening.
SELECT
tt.assignment_number,
tt.tab_name,
tt.old_value,
tt.new_value,
tt.oracle_value
FROM TestTable tt
WHERE tt.ppa_id = :1
AND ((:2 IS NULL) OR (:3 = tt.old_col))
AND ((:4 IS NULL) OR (:5 = tt.new_col))
Any suggestions are appreciated.
Thanks
--KK

Try this
OAViewObject OAViewB = (OAViewObject)OAAppl.findViewObject("DisplayDetailsVO");
OAViewB.setWhereClauseParams(null);
OAViewB.setWhereClauseParam(0,Integer.parseInt(Pid));
OAViewB.setWhereClauseParam(1,Changes_Flag);
OAViewB.setWhereClauseParam(2,Changes_Flag);
OAViewB.setWhereClauseParam(3,Oracle_Flag);
OAViewB.setWhereClauseParam(4,Oracle_Flag);
OAViewB.setMaxFetchSize(-1);
OAViewB.executeQuery();
Thanks
Shree

Can someone tell me how many seconds the cross fade is when running your nano in that mode? I teach spin class and want to know how much time I'm losing in that mode.

can someone tell me how many seconds the cross fade is when running your Ipod 6th Gen nano in that mode? I teach spin class and want to know how much time I'm losing in that mode.

You aren't losing any time in that mode, but I believe it is a 10 second fade out/fade in.

NQSError 14020 When Running Cross-Fact Query

Similar Messages

Maybe you are looking for