Number count jsf component?

hi,
does java studio creator have a number input component, as in which allows users to presss up and down arrows to increment and decrement the value of a number?
thanks,
lee

Hi,
There is no such component. However what you could probably do is make use of the dropdown list component, populate it with the number values and make use of it.
Cheers
Girish

Similar Messages

How can I include a javaScript files from within jsf component

Is there any way using which I can include javascript files from my jsf component. Because otherwise I have to write all the javascript commands using writer.write which is very tedious rather than this I just want to include the javascript file which contains all the functions required. Also I want that this file should be included only once irrespective of the number of components included.
Thanx in advance

This doesn't depend on JSF. You need to include a script tag, like:
<script src="/path/script.js"
language="JavaScript" type="text/javascript"></script>
If you want to include this only once, make a file included into every page, into which you can put other resources to be included along with this script.
HTH,
rs.

Relative positioning of JSF component

Hi,
How can I place a JSF component relative to another component, say I want to place a table below another table whose number of rows may vary.
Thanks,
Bob

Have two differnt tables or use frames and place the controls(tableand button in this case) in different frames.
<table width="100%" height="350"> -outertable
<table .................................................><tr> any number of rows. </tr>-inner table
</table>- - close outer
</tr </table> - close inner
<table> -new table
command button
</table> - close new table

Favorite JSF component library?

Hi all,
For those of you using one of the many JSF component library, what's your favorite, aesthetically? I've looked at a number of them, especially those listed over at jsfcentral.com. I think RichFaces and ICEFaces aren't bad, although I can't really seem to find one that matches my vision. Most of the ones I've seen feel very "boxy" and just aren't all that impressive. QuipuKit is also pretty good.
So I just want to know if there is any general consensus out there. Obviously everyone is going to have different tastes, but like all the ajax frameworks, I'm trying to whittle down the list to the most popular.
Thanks,
Justin

Hi all,
For those of you using one of the many JSF component library, what's your favorite, aesthetically? I've looked at a number of them, especially those listed over at jsfcentral.com. I think RichFaces and ICEFaces aren't bad, although I can't really seem to find one that matches my vision. Most of the ones I've seen feel very "boxy" and just aren't all that impressive. QuipuKit is also pretty good.
So I just want to know if there is any general consensus out there. Obviously everyone is going to have different tastes, but like all the ajax frameworks, I'm trying to whittle down the list to the most popular.
Thanks,
Justin

How to load a class dynamically (via reflection) in a jsf-component

Hi all,
I am writing my own jsf component and I would like to do it generically. Therefore I have an attribute, where the developer can pass a fully qualified classname, which I want to use to instantiate. But I have a Problem with the classloaders, everytime I get a ClassNotFound-Exception during debugging.
Does anybody know how it is possible, to to get the most parent classloader?
Currently I am even not able to load a class, which is in the same package like all other compontent-classes.
Thank you very much in advance
Thomas

Within web applications, I believe it is recommended to use Thread.getContextClassLoader(). Keep in mind that web applications require different classloader semantics than regular Java applications. The class loader which gets resources from the WAR is favored over others, even when this violates the normal class loading conventions.

How to add properties to a custom JSF component?

Hello, everybody!
I've just developed my first custom JSF component. It's a data pager and it is working pretty well. But now I want to be able to use some of it attributes in my backing beans at runtime. I mean, I want to bind it to component in the JSF page. It already has a binding attribute in the tld file, but I want to be able to accesss two values that the renderer of my custom component calculate inside it, which would relieve me from calculating these values manually in the backing beans. So, I would like to know how to make these values external to the component.
By now this is my custom pager class:
import javax.faces.component.UICommand;
public class UIPaginadorDados extends UICommand
}You can see that it has no logic because all the logic is in the renderer class:
import javax.faces.render.Renderer;
public class PaginadorDadosRenderer extends Renderer
// logic here
}As I said I want to be able to do the following in my backing beans:
private UIPaginadorDados pager = new UIPaginadorDados();
// and later...
pager.getCurrentPage();
pager.getPageCount();In the JSF page:
// I already can do this, because I have a binding attribute
<urca:paginadorDados binding="#{backingBean.pager}" />I suppose that I'll have to create the properties getCurrentPage() and getPageCount() in the component class, UIPaginadorDados, but I don't know how to get the values to the properties from the renderer class. I don't even know if this is how I should do it.
So I would appreciate a lot your help about this subject.
Thank you.
Marcos

Marcos_AntonioPS wrote:
RaymondDeCampo wrote:
I neglected to mention: do not forget to implement the methods in StateHolder to preserve the properties you added to your component.Hello, Raymond. Could you elaborate a little more on that? If you could give a short example, it would be helpful.
MarcosNo problem. I have already found out how.
Thank you very much, Raymond.
Marcos

How to make Javascript access standard JSF component

Hello all,
I'm in need of a proper javascript code that access standard jsf component.
Like we do for html tags;
if( el.tagName.toLowerCase() != 'select')
I need to do the same thing for a jsf tag i.e; <h:selectOneMenu>. How to make javascript access <h:selectOneMenu> like it does with <select> tag ? Please let me know asap. Extremely sorry if the question is kind of stupid....cause I'm a beginner for JSF environment.
Any sort of help, suggestion or advice would highly be appreciated.
Thanks in advance.

Ummmm, I may be off the beaten path, but by the time your javascript is called the h:selectOneMenu would be a select tag within the dom. You should be able to reference that tag as you normally would.

JSF component inside HTML table -- not rendering properly

I have a HTML table like the one below. In one of those columns (td) I have a JSF component. When I run the app, the JSF component (even if its a simple inputText or panelGrid or panelGroup) is not getting inside the td. Instead, it forms a seperate table after this td.
Code I have:
<table border="0" cellpadding="0" cellspacing="0">
<tbody>
<tr>
<td>... ..MULTIPLE Td's here - Deleted for simplicity </td>
<td class="topNav">
Blog Directory
</td>
<td>
<img src="./images/top_button_right.gif"/>
</td>
<td class="topNav">
<f:panelGroup>
<h:inputText value="Username"/>
<h:inputSecret value="Password"/>
</f:panelGroup>
</td>
</tr>
</tbody>
</table>
What I expected:
username, passwd field inside the top level HTML table.
What comes: (as a result of running thsi JSF page )
<table> -- Original table
<td> </td> -- -TD that had the inputText - comes empty here
</table>
<table>
<tbody>
<tr>
<td><input type="text" name="_id1:header:EasyHeader:_id4" value="Username" /><input type="password" name="_id1:header:EasyHeader:_id5" value="" /></td>
</tr>
<tr>
<td><table>
I am a newbie to JSF & due to the complexity of the layout & page, I m unable to get rid of the HTML tags totally.
Thanks in advance.
Ganesh

Found the solution to the problem.
wrapped the entire HTML page till the JSF component ( panelGrid) under <f:verbatim>.
something like this
<f:verbatim>
<table>
<tr> <td>...</td>
<td>
</f:verbatim>
<h:panelGrid> ... </h:panelGrid>
<f:verbatim>
</td>
</table>
</f:verbatim>

Can i use one JSF component's value for other component in the same page.

Can i use one JSF component's value for other component in the same page.
For example
I have a <h:selectBooleanCheckbox id="myChk"> in my jsf page, i want to access its value for another component like:
<h:commandButton disabled="#{myChk.checked}" action="myAction" value="myValue" />
** "myChk.checked" >> I am just asuming "checked" property is available...

Bind the checkbox to a UIInput myChk property. Then you can reference this property from the page, e.g.
<h:selectBooleanCheckbox binding="#{myBean.myChk}" onchange="submit();" />
<h:commandButton disabled="#{myBean.myChk.value}" action="myAction" value="myValue" />

On my iPad mini, my inbox number count is over 500 even though the inbox. Is empty. All accounts do this on my iPad but all my other device are fine. Problem showed up two weeks ago???

On my iPad mini, my inbox number count is over 500 even though the inbox. Is empty. All accounts do this on my iPad but all my other device are fine. Problem showed up two weeks ago???

Hi Peter,
Thanks for participating in the Apple Support Communities.
It sounds like the Mail app on your iPad mini is showing that you have over 500 unread email messages, but your inbox is actually empty.
There are several steps I'd use to troubleshoot this situation.
First, restart your iPad to see if it clears up the symtom:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Press and hold the Sleep/Wake button until the red slider appears.
Drag the slider to turn your device completely off.
After the device turns off, press and hold the Sleep/Wake button again until you see the Apple logo.
If this doesn't correct the behavior, try removing and re-adding the affected email accounts next:
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Tap the affected email account.
Tap Delete Account.
Add your account again.
If the same thing happens after re-adding the account, you may need to use the steps below to reinstall iOS. You may want to back up your iPad to iTunes before completing this step.
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
From:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
All the best,
Jeremy

Tutorial on how to create an Ajax-enabled JSF component in Creator?

Is there a tutorial on how to create (not use/import existing) an Ajax-enabled JSF component using Creator 2? I read somewhere that it was done during a presentation in 3 minutes! Now that I really want to see ;-
thanks,
-nikita

As far as I remeber, Edwin Goei's examples are the
closest thing to the info you are looking. He has an
example component, but don't remember if they're
AJAX enabled. Check it on
http://wiki.java.net/bin/view/Javatools/CustomCompone
tLibraries.
Best regards
Antonio.Thanks for the plug. I've been meaning to update that article. Writing an AJAX component is similar to writing other kinds of components but the developer uses AJAX techniques. The latest version of the popup calendar which is checked into the bpcatalog project of java.net uses Dojo which also has some support for AJAX. I haven't yet had time to update the article yet, unfortunately.
-Edwin
http://blogs.sun.com/edwingo/

Is it possible to number count your invoice numbers in mac word?

Is it possible to number count on an invoice template done on mac word?

From Apple:
iCloud stores new photos for 30 days, so you have plenty of time to connect your iOS device to Wi-Fi and make sure you always have your most recent shots handy.

Setting focus to a jsf component inside a tab.

Hi,
How can I set focus to a jsf component that is placed on some tab other then the first. Suppose that on the 2nd tabitem of the tab. there are some components on this tab . How can I set the focus to any one of these components on tabitem2 when the jsf page is opened.
Any ideas..
Thanks in advance..

Use Javascript.var el = document.getElementById('elementId');
if (el && el.focus) {
el.focus();
}

How do I delete the number count on deleted sent emails

How do I delete the number count on deleted sent emails

Should there be sent items in your sent items list? I'm thinking you may need to just reboot your iPad.
Press and hold BOTH the power and home buttons at the SAME time until the Apple Logo appears, then let go of both buttons and your iPad will restart. Youwon't lose any data or settings.

Unexpected error decoding JSF component: {0} in SAP BO 4.0 sp2

Hi,
Am getting the above mentioned error repeatidly. I tried clearing the tomcat cache folder and restarted the tomcat but that couldnt help me to resolve the issue, Help me to resolve the issue.

Hi Abhi,
Please refer the below KBA regarding your issue
1710454 - Unexpected error decoding JSF component BI 4.0
https://service.sap.com/sap/support/notes/1710454
Thanks,
Daya

Number count jsf component?

Similar Messages

Maybe you are looking for