Tutorial on how to create an Ajax-enabled JSF component in Creator?

Is there a tutorial on how to create (not use/import existing) an Ajax-enabled JSF component using Creator 2? I read somewhere that it was done during a presentation in 3 minutes! Now that I really want to see ;-
thanks,
-nikita

As far as I remeber, Edwin Goei's examples are the
closest thing to the info you are looking. He has an
example component, but don't remember if they're
AJAX enabled. Check it on
http://wiki.java.net/bin/view/Javatools/CustomCompone
tLibraries.
Best regards
Antonio.Thanks for the plug. I've been meaning to update that article. Writing an AJAX component is similar to writing other kinds of components but the developer uses AJAX techniques. The latest version of the popup calendar which is checked into the bpcatalog project of java.net uses Dojo which also has some support for AJAX. I haven't yet had time to update the article yet, unfortunately.
-Edwin
http://blogs.sun.com/edwingo/

Similar Messages

How to Create a Remotely Enabled Function Module

Hi All,
How to Create a Remotely Enabled Function Module.
I Want to Create a FM Using Sample Data , This for Practice
What Fields can i give in the Import and Export Parameters.
Please Give me one Example
Can Any one Give me the Steps to do this.
Regards
Vamsi

Hi Vamsi,
Lets do simple example where you will first create a RFC in one server (say A) and create normal program in othere server (say B). Finally you will call the RFC in A from B.
Do the following steps for creating RFC in server A.
1. log on to server A
2. go to se37
3. Edit -> function groups-> create function group and give the function group name (say ZGRP).
4. create a FM ( say Z_TEST_RFC) in se37 providing the function group which is created just now.
5. go to attribute tab -> choose remote-enabled module from processing type.
so that your FM will become RFC.
6. provide the import parameter in import tab.
we will provide only two import parameters.
- parameter name : P_NUM1, typing: TYPE, associated type : I & check the pass value (all the parameters of RFC must pass by value).
- parameter name : P_NUM2, typing: TYPE, associated type : I & check the pass value
7. provide the export parameter in export tab.
parameter name : P_SUM, typing: TYPE, associated type : I & check the pass value
8. write the given simple code in source code tab.
FUNCTION Z_TEST_RFC.
P_TOT = P_NUM1 + P_NUM2.
ENDFUNCTION.
Do the following steps for creating ABAP program which will call the RFC in server B.
1. se38 - > creat a program.
2. write the given simple code.
data tot type i.
call function 'Z_TEST_RFC' destination 'XXXXXX'
exporting
 p_num1 = 10
 p_num2 = 15
importing
 p_tot = tot.
write tot.
please note that XXXXXX is RFC connection which is avialable in sm59 transaction in server A.
-go to sm59 - > abap connection (list of RFC connection configurations are avialable). choose server B connection and replace it of XXXXXX in the code.
finally you can execute the normal abap program that will call the RFC and display the result.
Regards,
Sukhee

HT3630 How to creat an app-enabled accessories for iPhone? Please help me to get an answer..

How to creat an app-enabled accessories for iPhone? Please help me to get an answer..

To get hardware interfaces and API's via hardware you
need to join the MFi program. That info is here:
https://developer.apple.com/programs/mfi/
To get the additional software to be able to download
and test code on any iDevice, you must join the
iOS Developer Program. That info is here:
https://developer.apple.com/programs/ios/
Both programs require fees and NDA agreements,
especially hardware as most vendors that supply
components development tools will not sell you any
of their tools unless you are a member of the MFi
program.

How to creat an app- enabled with iPhone ?

How to creat an app- enabled with iPhone ?

first there was FCP X now folks want FCP iPhone?
well now that engineers controll broadcast TV stations and pop concerts from an iPad, I guess thats OK
I guess we wont need a Mac Pro upgrade now.

How we create the Remote enabled FM

hi.. can any one tell me how to create the Remote Enabled FM
venkat

You create a RFC function module just as you create a normal function module.
After you create the function module, in the general tab of the function module select the "Remote Enabled" radio button which makes the function module as RFC function module.
Also the parameters should be Pass by value so select the "Pass value" check box against each of the parameters.
Last but not the least. RFC function modules cannot have exceptions, so define a return structure and pass all your messages like success, error etc. in the return structure.
After the function module is created, the RFC function moule can be called using the statement
CALL FUNCTION <FN Name> DESTINATION <RFC Dest>.
where RFC Dest it the remote destination created in SM59.
Ravi.

Tech Preview for AJAX-enabled JSF with BEA Workshop 10.1

BEA is announcing a tech preview, ending in September 2007, for BEA Workshop Studio 10.1 and BEA Workshop for WebLogic 10.1. This technology preview integrates ICEFaces's Ajax-enabled JSF technology into Workshop. ICEfaces is a library of Ajax-enabled JSF tags, distributed under a number of open source licenses, including but not limited to Apache 2.0 and the Mozilla Public License. For more information and further announcements, please visit Gary Horen's Blog.
Get it now 
Existing BEA Workshop 10.1 users can access this technical preview via an Eclipse update, accessible at the following URI:
dev2dev.bea.com/eclipse/icefaces-tooling/
New Workshop 10.1 users should download the product first, and then apply the Eclipse update.
BEA Workshop for Studio 10.1
BEA Workshop for WebLogic 10.1
Tutorial
Visit BEA's online developer community for an excellent tutorial at http://dev2dev.bea.com/pub/a/2007/06/icefaces-workshop.html
Key Features<UL>
<LI>WYSIWYG page construction for ICEfaces
<LI>Full BEA AppXRay? support offers unique capabilities in code completion, code navigation, dependency visualization, consistency checking with generated classes, configuration files and annotations, pre-build error checking, and validation that understands ICEFaces JSF tags.
<LI> Supports SUN RI and Apache MyFaces JSF implementations
<LI> Workshop Smart Editor assistance with tag attributes, and smart navigation between markup, JSF configuration files, and Java types
</UL>
Tech Preview feedback
Please post questions and feedback to the Workshop Tech Preview forum. We're anxious to hear from you!

BEA is announcing a tech preview, ending in September 2007, for BEA Workshop Studio 10.1 and BEA Workshop for WebLogic 10.1. This technology preview integrates ICEFaces's Ajax-enabled JSF technology into Workshop. ICEfaces is a library of Ajax-enabled JSF tags, distributed under a number of open source licenses, including but not limited to Apache 2.0 and the Mozilla Public License. For more information and further announcements, please visit Gary Horen's Blog.
Get it now 
Existing BEA Workshop 10.1 users can access this technical preview via an Eclipse update, accessible at the following URI:
dev2dev.bea.com/eclipse/icefaces-tooling/
New Workshop 10.1 users should download the product first, and then apply the Eclipse update.
BEA Workshop for Studio 10.1
BEA Workshop for WebLogic 10.1
Tutorial
Visit BEA's online developer community for an excellent tutorial at http://dev2dev.bea.com/pub/a/2007/06/icefaces-workshop.html
Key Features<UL>
<LI>WYSIWYG page construction for ICEfaces
<LI>Full BEA AppXRay? support offers unique capabilities in code completion, code navigation, dependency visualization, consistency checking with generated classes, configuration files and annotations, pre-build error checking, and validation that understands ICEFaces JSF tags.
<LI> Supports SUN RI and Apache MyFaces JSF implementations
<LI> Workshop Smart Editor assistance with tag attributes, and smart navigation between markup, JSF configuration files, and Java types
</UL>
Tech Preview feedback
Please post questions and feedback to the Workshop Tech Preview forum. We're anxious to hear from you!

How to create and call a COM component in Java

Hi All,
can you suggest how to create and call a COM component..or if have any sample simple application can you send it to me...i will try to develop my project.
actually i am configuring a OCR Engine using SDK which is in VB .Net when i contacted their support they told that if i have any sample COM based component Project they will help me...
So please can you help in this.
Thanks in advance.

As said by my fellow posters Java Devolopment Environment (Except Microsoft implementation of JVM,this is no longer supported by MS themseleves) does not provide an built-in support to serve this cause.
If you are looking to devolop a custom based solution the below is a good place to start with where end user is talking about Java <=> JNI <=> Native <=> COM connectivity.
[http://bloggershetty.blogspot.com/2004/12/java-jni-com-activex-bridge-lots-of.html]
However,if you are looking for ready made solutions ?
Implementation any one of the solutions stated below might serve your cause.
Open Source Solutions:
[http://j-interop.org/]
[http://www.danadler.com/jacob/]
Commercial Solutions:
[http://javacombridge.com/]
[http://www.jnbridge.com/]
[http://www.nevaobject.com/j2cdetails.asp?kw=java%20com%20bridge]
[http://j-integra.intrinsyc.com/]
Hope this might help :)
REGARDS,
RaHuL

How to create a hint for a component(awt),thanks

How to create a hint for a component(awt),the component of awt has not the property.

If you are talking about a tooltip, this is going to be hard.
You are probably going to have to use a mouseMotionListener to get the event that the mouse is over the component and then a Timer to fire the showTooltip event if the mouse hasn't moved in some amount of time.

How to create an input enabled query with Integrated Planning

Hello experts. I have created an aggregation level in IP and I am trying to create an input enabled query based on this aggregation level. My problem is in the properties. On the query properties planning tab the Start query in change mode is grayed out and I am unable to select it. Also on all the chararteristic properties on the planning tab, the planning settings are all grayed out as well and the No budgeting is selected. There is a red exclamation here that says 'function not supported by server' Any ideas? Points will be awarded.
Peter

hi,
go through this help for the procedure...
[http://help.sap.com/saphelp_nw04s/helpdata/en/43/1d023a41130bd5e10000000a422035/frameset.htm]
hope it helps...

How to create custom(or) user defined component in SAPTAO

Hi,
Please provide me some document or steps on how to create custom component in sap tao.
Thanks a lot in advance.
Regards,
Sudha

Hi,
If you want create any custom components, you should use SAP QTP to create it.
Here are the simple steps:
i) Go to QTP -> Click on New - > Select Scripted Component - > ((Select SAP_Doc) area (i.e. whatever application area you have created for SAP TAO installation)) -> Record or Write a script based on your requirement & save
ii) Go to QC -> BPT -> open above component and insert the parameters and call these values in QTP script level (either way you can do)
iii) Create a datasheet and declare the parameters in datasheet and call this sheet whenever you have required.
Good luck.
Ram

Ajax with JSF Component

How is it possible to embed Ajax with JSF Components. Every JSF request by default hits the Faces Servlet. Is it possible to by pass this flow for certain events?

Wouldn't use it, that project is practically dead. It's has never been further developed/documented/supported since version 0.1 alpha in 2005.
Ajax4jsf is still active and has excellent documentation/support.
It might be good to know that the upcoming JSF 2.0 provides ajaxical capabilities.

How to make Javascript access standard JSF component

Hello all,
I'm in need of a proper javascript code that access standard jsf component.
Like we do for html tags;
if( el.tagName.toLowerCase() != 'select')
I need to do the same thing for a jsf tag i.e; <h:selectOneMenu>. How to make javascript access <h:selectOneMenu> like it does with <select> tag ? Please let me know asap. Extremely sorry if the question is kind of stupid....cause I'm a beginner for JSF environment.
Any sort of help, suggestion or advice would highly be appreciated.
Thanks in advance.

Ummmm, I may be off the beaten path, but by the time your javascript is called the h:selectOneMenu would be a select tag within the dom. You should be able to reference that tag as you normally would.

How to Create an Input Enabled Query

Thanks in advance for your help, and sorry for the seemingly simple question, but I am new to integrated planning.
I am trying to provide a simple method for the end users to update planning data in a cube. From what I read I should be able to do this with a real time cube and an input enabled query.
I have created the real time cube with my desired characteristics and key figures. I have loaded base data to it and change it to be input ready.
Now I need to create my input ready query. I cannot seem to figure out how to do this. From BEx Analyzer the options for enabling input and change mode at query start are greyed out.
Can someone enlighten me on what I am missing or suggest some reading on how to do this?
Regards
KB

OK, I got over this hurdle. Turning a KF on for input enable the selection to have the query open in change mode. However, when I do this and run the query in WeBEx the query line style changes to all blue and does not allow input.
I have all my Characteristics from the cube included in the aggregation and have included them all in the query as well (in the same order).
Any thoughts?

How to create "Verbose mode" (Enable/disable trace output)?

Hi there! I'd like to do as Papervision:
// Block Papervison3D trace output
Papervision3D.VERBOSE = false;
that is, a global variable for enabling/disabling the trace outputs of my own program. I come up with creating
a class and putting a static boolean member variable. But there is something I'm not sure about: How to use
it...
For example: every time I need to do a trace, would I have to put this ? -->
if( MyClass.VERBOSE ) trace("whatever");
So it isn't needed to instance the object because a static variable is used. That's the way, isn't it?
Thanks and regads.

From the book I'm reading, the author uses it the same way you're saying:
Inside your Classes, you have
private var _verbose:Boolean = false;
I noticed he uses it always (or almost) in the constructor of the classes:
public function whatever (var:*, verbose:Boolean);
//I tend to use verbose:Boolean = false on the constructor too so you don't have to always set it.
inside the constructor you have:
_verbose = verbose;
and normaly inside methods handling events like Event.OPEN, Event.INIT, IOErrorEvent.IO_ERROR, HTTPStatusEvent.HTTP_STATUS, you have something like this:
private function onOpen (e:Event):void {
if (_verbose) {
trace("The loading process has begun, or whatever");

[TUTORIAL+KB] How to create an EML export mechanism in GW8

Hello there folks!
I'm pretty new to the topic of C3PO, GW and all the Novell stuff and one of my tasks was to "code an export mechanism for GW8 thats lats us save e-mails to our storage system". Ok, that was a hammer. But wrapping my head around it and starting to error out the things got me pretty far and I guessed it was tutorial material. So here we go:
@Moderators: Please don't delete this. I need some time to wrap it all up.
This tutorial is intendend for C# only. I don't like VB and I'm too dumb for C++ so if you need it for another dialect you need to work it out your self.
Agenda:
Needed packages
C3PO wizard
Loading to Visual Studio 2010
Needed Imports/References
Simple MessageBoxing
Get Messages and stuff them into Lists
Export single Messages
Export multiple messages
Registering and caching the .DLL
Testing (please help me with a better way here)
1. Needed packages
the novell-gwc3po-devel-2012.11.15.zip file (unzip this after downloading)
an installed version of Visual Studio 2012 C# (or if you want to work with a different dialect choose another)
cmd access to some of the registering tools:
It may be the best thing to set tose paths up in you env variables. Allthough when running the cmd with administrator privileges you can't use regasm from env variables and need to cd to the directory.
RegAsm (regasm.exe): C:\Windows\Microsoft.NET\Framework\v4.0.30319 (the version depends on the target)
GACUtil (gacutil.exe): C:\Program Files(x86)\Micrsoft SDKs\Windows\v7.0A\Bin\NETFX 4.0 Tools\ (this path is also dependent on your target framework version, I chose .NET4)
StrongName (sn.exe): C:\Program Files(x86)\Micrsoft SDKs\Windows\v7.0A\Bin\NETFX 4.0 Tools\ (this path is also dependent on your target framework version, I chose .NET4)
a good beverage :D (you should obtain multiple of these :D)
2. The C3PO wizard
Loading to Visual Studio 2010
Needed Imports/References
Simple MessageBoxing
Get Messages and stuff them into Lists
Export single Messages
Export multiple messages
Registering and caching the .DLL
Testing (please help me with a better way here)

can see it in the screenshot8 there is a function called "_Z8AddierenddPd" instead of "Addieren". I copied this name to Labview (see screenshot9) and it worked.
I'm sure that there is a way to compile the shared folder with gcc without decorations (mangling). But I don't know how. If someone has a recommendation I would be very glad!
Prepend each function declaration that you want to be available without name decoration with
extern "C" <your function declaration>
Or if you have multiple functions you want to export you can in the header file where you declare your functions simply use:
#ifdef __cplusplus
extern "C" {
#endif
<all your function declarations>
#ifdef __cplusplus
#endif
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Tutorial on how to create an Ajax-enabled JSF component in Creator?

Similar Messages

Maybe you are looking for