Number not change in excise invoice print

hi all,
we have a problem with excise invoice print.
previously invoice created with number 49, now new number get posted with 49 again.
check in J1I9 for number range. it shows current number 49 means print out expected number was 50 but it prints 49.
can somebody helps me to identify error ?
thanks in advanced.

Dear,
Please go in change mode and check it's setting is like that,
Subobject data element : J_1ISERGRP
To-year flag                  : Tick
Number length domain   : NUMC10
No interval rolling           : No Tick
Number range transaction : Blank
Regards,
Sandip

Similar Messages

Excise invoice printing is required in preprinted stationary format.

Dear All,
I developed a new program & script for excise invoice printing. The requirement is as under: Page layout will be such where 10 line items( as maintained in billing document) can be printed in each page i.e. if billing document have 25 line items (including Finished goods & accessories) , so it should be printed in 3 pages. In each pages, page no should be printed first, then consignee address, customer address, Date, SO number, Tin no etc. Those above details should come in header portion of each page. Then first 10 line items can be printed. If there are more line items, then next 10 items get printed in next page & so on. In the very last page only assessable amount, Tax, VAT, Educes amt & Gross amt along with Excise number, removal time, type if invoice, payment mode etc (in footer section) should be printed. If billing document have only 10 line items, it will be printed in a single page.
I have declared First page & next page only. In each page I have declared required page window according to window size of preprinted stationary format. For that I have used DINA4 page format( size 210 / 297 MM). But actual height of stationary format is 12 inch ( 305 MM).
In print preview it is displaying supereb. All required data is being displayed properly. But when I am taking printout from Dot-matrix printer, from second page onwards it start printing two lines prior to actual position (two lines going up).
I did some permutation to adjust it. But I can not find a proper resolution to it. My thinking is that it is only printer setting problem. Also in PC level in printer setting I used custom paper size declaring actual paper width & height.
Please advise whether it is script/ program problem or printer setting problem.
Regards
Srimanta

Dear Bapujee/Santosh/Srimanta,
I know this is a very peculiar problem. Actually the SAP paper size definations are over-ruled by spool server's print manager's defination i.e. the setting of the PC's finally works.
Simple solution is create a paper size in the PC and set the printer with the new paper size.
Now, you will encounter another problem. The user may using the printer for other paper size printings also. To avoid the changing of PC's paper size every time the user prints different size, you can adopt this :
In the spool server (i.e. the PC with printer), create different printers with required paper size and name this printer with some meaniful names. Now, in R/3, while printing with LOCL output device the user can select the required printer.
This can be done for network printers also.
All the best.
With Regards,
Abhijeet.

Accounting documents are not posted for Excise invoice

Hi,
1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
2. where we will maintain number ranges for excise invoice..?
Thanks
Rao..

hi
1. The Excise invoice has been created with reference to F2 invoice but the accounting documents is not posted for excise invoice, what is the settings needs tobe maintained to post the accounting entries to excise invoice..?
Not sure but can u try to relese this to accounting
2. where we will maintain number ranges for excise invoice..?
Excise invoice number range is depend on Excise series group.
T-Code : SNRO
Following is the No. Range Objects related to Excise, select the proper no. range object as per your requirement.
J_1I57FC - 57FC Number Range
J_1IARE1 - ARE1 Doc No object based on Series Group
J_1IARE3 - ARE3 Doc No object based on Series Group
J_1IBOND - Excise Bonding: Bond number object
J_1ICERT - Withholding Tax Certificates (India)
J_1ICHLNNO - Internal number range for challans
J_1ICONPLA - Consolidated PLA serial no. generation
J_1IDEPINV - Excise Invoice Number for Depot Invoices
J_1IEXCEXP - Export excise invoice number range
J_1IEXCINV - Excise invoice number
J_1IEXCLOC - Local excise invoice numebr range
J_1IEXCTST - Excise invoice with intervals
J_1IEXINEX - Excise invoice number for export
J_1IINTNUM - Internally document number to be generated
J_1IINTPR2 - Despatch serial number
J_1ILIC - Excise Bonding: License number object
J_1IPLA2 - PLA part II number range object
J_1IRG1 - RG1 Number range object
J_1IRG1_T - No. Range for RG1 - Excise group / Material
J_1IRG23A1 - RG23A part 1 no. range object
J_1IRG23A2 - RG23A part II number range object
J_1IRG23C1 - RG23C part I number range object
J_1IRG23C2 - RG23C part II number range object
J_1IRG23D - Folio Numbers for RG 23D
Check the link
Re: Excise Invoice Number Range
excise invoice and domestic invoice sharing same number range

Excise invoice printing problem (page skiping)

Hi all,
Issue: Excise invoice printing as maintained in billing document.
In each page, page no, address, so no etc will come in the header portion.
In main window, I have to print out 10 line items of billing doc.
If line items exceeds 10 lines then subsequent items should be printed in the following page. And at the very last page, asseable amount, vat, tax amount, mode of transport & amount in words should be printed.
It is getting printed superb without header text of billing doc.
Requirement is that after printing completed of all line items, first seven line of billing documents header details (eg FG, semifinished, packing, size, etc.) are to be printed.(eg if line item is 10, then header details will be printed in the last page containing footer details). I have declared two text element in main window (one is item, another is header text). My requirement is to control dynamically print of items as well as header text in main window. I have declared 7.60 MM of main window height which is suitable for only 10 line item printing. Header text will come only on last page. I have declared 7 different header text variable in main window as maintioned in driver program. If there is no header text in billing document, it is giving 7 blank line feed after items printed.(eg if i have 10 or 20 line items then it is giving one extra page for 7 lines blank header text). I want to control this page skipping. If there is no header text then I want to finish printing in that particular page where items are being finished. It should be dynamic.
Pls help.
Srimanta

Hi,
What i understand from request is to print the header data if exit and not then do not print the header data bust need to print the tiem data.
For this the solution is as follows:
1) define the header data in separate window (but not in main window) and name this windiw as header and also place this window on top of the page i.e. adjust the window to pribt on top of the page.
2) Now place the condition for this wibdow i.e. to print if the header data Internal table or variable field data is ne space.
with above said details te header window will print if there is data only and this will print on all pages.
Do let me know if ou need any more details in this regard.
Regards,
Raghotham Reddy.
if this is rght solution for you then do not forget to allocate reward points.

Higer education cess is not flowing to excise invoice.

Hi All,
Higer education cess is not flowing to excise invoice.
whats the note number need to be applied?
Reg,
Amol

Check the below link,try to do the same setting which was suggested by Mr.Lakshmipathi.
Higher Secondary Education Cess not flowing in Excise Invoice
Ram

Excise invoice printing problem

hi experts,
I am working with excise invoice printing thru J1Ip .a document has three materials which has 3 batch splits each .so total items are 9 .Now they need the total of each item .so only 3 items should come imn the print out.what shll i do for it.i am using scripts ..
mani

Hi,
What i understand from request is to print the header data if exit and not then do not print the header data bust need to print the tiem data.
For this the solution is as follows:
1) define the header data in separate window (but not in main window) and name this windiw as header and also place this window on top of the page i.e. adjust the window to pribt on top of the page.
2) Now place the condition for this wibdow i.e. to print if the header data Internal table or variable field data is ne space.
with above said details te header window will print if there is data only and this will print on all pages.
Do let me know if ou need any more details in this regard.
Regards,
Raghotham Reddy.
if this is rght solution for you then do not forget to allocate reward points.

Not Education.Cess not apper in Excise Invoice.

hi all,.
i have maintained properly in Tax dafault information in logistics general .but not Education.Cess not apper in Excise Invoice.

Post this message to SAP-OSS. They will guide you which note number is to be applied to resolve this problem.
I do not remember the note number, else I would have updated you on the same.
Regards,
Rajesh Banka

Accounting document not generating for excise invoice.

Dear all ,
my issue is
accounting document not generating for excise invoice
we are creating accounting document in J1iin
with refferance to billing document but the accounting docuemnt is not generating
the accounting document for billing document is generated
so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
please help
regards
Subrat

IMG -> In Logistics u2013 General -> Tax on Goods Movement -> India -> Account Determination -> Specify Excise Accounts per Excise Transaction
Check if the following is maintained or not
DLFC       CR Credit      PLAAED PLA AED account
DLFC       CR Credit      PLAAT1 PLA AT1 Account
DLFC       CR Credit      PLABED PLA BED account
DLFC       CR Credit      PLACESS PLA cess account
DLFC       CR Credit      PLAECS PLA ECS Account
DLFC       CR Credit      PLASED PLA SED account
DLFC       CR Credit      RG23AED RG 23 AED account
DLFC       CR Credit      RG23AT1 RG 23 AT1 Account
DLFC       CR Credit      RG23BED RG 23 BED account
DLFC       CR Credit      RG23ECS RG 23 ECS Account
DLFC       CR Credit      RG23SED RG 23 SED account
DLFC       DR Debit       MSUSP CENVAT suspense account
Also IMG -> In Logistics u2013 General -> Tax on Goods Movement -> India -> Account Determination -> Specify G/L Accounts per Excise Transaction
Check if for all Excise group u2013 DLFC u2013 Company Code combination GLs are maintained or not (especially in production client)

Accounting document not generating for excise invoice-please help

Dear all ,
my issue is
accounting document not generating for excise invoice
we are creating accounting document in J1iin
with refferance to billing document but the accounting docuemnt is not generating
the accounting document for billing document is generated
so why the accounting document for excise invoice is not genrating its showing the correct amount in BED ,cee and HE Secc.
please help

Dear G. Lakshmipathi,
As uknow i am getting problem when i am creating the debit memo
so is there any specific ETT for debit memo is there .because we are not maintaining delivery type to billing type here in CIN setting
so its not goods removal through sales . so what will be transaction type for this.
how to check the error that why the accounting document is not generated as no error log is also comming.
so please help me in this regards.
Thanks with Regards
Subrat

Excise invoice print out

Hi All,
We need to take Excise Invoice (J1IV) print out. we are using ECC 6.O version, what is the Tcode for taking the excise invoice print out.
Thanks and Regards
Chandru

Hi All,
Thanks for your updates,
I have tested with Tcode J1IP to take print out of Excise invoice with out put type J1I0 and flagged inculde printed excise invoice.
After clicking print invoice (F8), i'm unable to take the print out. No pages displayed.
Please help me to resolve the problem.
Thanks and Regards
Chandru

MIGO-Capturing problem-Item is not available for Excise invoice,deselect th

Hi Gurus
while doing MIGO and part 1 posting am getting following error
MIGO-Capturing problem-Item is not available for Excise invoice,deselect the item
kindly help in this
Maruthi

hi
check all settings in J1ID
or
in po did u got ur all values correctly for excise cess and hcess
if yes then check ur vendor excise details in j1id
if above setting are done properly then check ur CIN setting in spro>log gen>tax on goods movement >india>account determination >specify excise acct as per transaction/specify G/L acct as per transaction
regards
kunal

Incoming Excise Invoice - Print Layout Design

Dear all,
        How to prepare the Incoming Excise Invoice Print Layout Design.
        That Excise is Dealers Invoice.
        For Ex: 'X' is the one material , this has defined in material master as Inventory , Purchase and Sales item and its Excisable material.
       Ths 'X' material purchase from the vendor and selling to the customer.
       At the time sales for incoming excise invoice, in that invoice should include the what is purchases of that material and what is sales?
     This information how to bring the Print Layout Design at Incoming Excise Invoice.
         Please guide to me
Warm Regards,
K.Prasad,
+919921525560.

At first you have to check the Excisable in Item master for doing excise transactions.
Incoming Excise Invoice can be generated after doing Goods Receipt Transactions.
From Copy to Option Goto >> Incoming Excise Invoice >> the invoice form will be opened
From here you can select the PLD icon and design the layout you need.
come back here if any queries

VALUES NOT UPDATED IN EXCISE INVOICE

hi gurus ,
well all the settings to my knowledge are correct for CIN customization , but the excise values are not updated in excise invoice .the values are 0 " . can ne1 pl help ? dts top priority .

Hi,
Spro>Logistics u2013 General>Tax on Goods Movements>India>Business Transactions>Specify Which Movement Types Involve Excise Invoicesu2014here check for movt type 122 which register is maintained once appropriate register is maintained there then system will update the same.
Or even you can try J1I5 update register with movt type 122 & enter material document (return delivery material document no) & classification IPD (Issued for clearance/Removal on payment of duty) & select the correct radio button of register. Once update the register then Extract data for excise registers Using J2I5.
It will update both the data in the register
Rgs

Smart form for Excise Invoice Printing

Hi experts,
I am supposed to convert Standard sap script for excise invoice printing (Driver program name-J_1IEXCP) into smart form. I will be thankful if somebody will provide me standard smart form or oss no available for the same.
Regards,
Sanjay.

Hi
Welcome to SDN Community
Have u converted the script to smartform ????
If No Then follow this procedure
In smartform Utilities --> Migrate SAP Script Name --> Give your scriptname and below give your Z smartform name and then migrate it
Regards
Pavan

In sales quotation document number not changed..

hiii guys
i getting some problem in sales quotation about document number.....
actually i opened by another user like sham.he is sales department..he have only sales authorizations..when we press add button, data has been saved..but number not changed... but after saving,we close form and open again then that that time number automatically changed..its comes serial number..when we press add button,,we getting same problem...

hi
I think you got confused with document and draft no on Approval documents.
Ofcourse many user,got this confusion.
The Document number wont be generated in Sales Quotation till you add it(i.e when waiting for approval)
The document number which is shown in that document when pending for the approval, is not the finalised number.
Its just the next number of sales quotaion which wont get stored in sales quotation,rather it will store in Draft table ODRF.
when you have too many documents which is waiting for approval,you can notice that document number will be same for all the other documents.
So you note down the Draft Number which is UNIQUE.
For Ex:
you are creating sales quotation which has the document number as '335'.
so when you sending it for approval the draft number will be staored as '211'.
after getting the approval,when you add it,document number will be generated as '337' because two documents were posted when the draft no:211 is waiting for approval.
revert me for any clarification.
Edited by: kambadasan on Feb 23, 2012 1:41 PM

Number not change in excise invoice print

Similar Messages

Maybe you are looking for