Number of connections expiry problem - URGENT
Hi all,
We are using Adaptive RFC model to connect to R/3 and call BAPIs. All the applications use a single JCO connection (which we create in content admin->webdynpro) to connect to R/3.
<b>We were getting "<u>max no of 100 conversations</u> exceeded" exception with the JCO.</b>
Here's the exact exception :-
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM GWHOST=149.183.181.210, GWSERV=3318, ASHOST=149.183.181.210, SYSNR=18 LOCATION CPIC (TCP/IP) on local host ERROR max no of 100 conversations exceeded TIME Wed Dec 21 22:43:55 2005 RELEASE 640 COMPONENT CPIC (TCP/IP) VERSION 3 RC 466 MODULE r3cpic.c LINE 9704 COUNTER 3
Here is the code which we are using to connect and disconnect to R/3</b> :-
IWDJCOClientConnection connection = WDSystemLandscape.getJCOClientConnection(
"PROD_MODELDATA_RFC",
JCO.Client client = connection.getClient()
<modelobj>.setJcoClient(client);
<code to execut the BAPI>
JCO.releaseClient(client);
connection.release();
All the applications use the same JCO and the same code (as mentioned above) to connect and disconnect.
Even now we are getting the same exception with the JCO and thus no data is returned and no application works.
<b>I have checked in R/3, <u>the connections are getting created, but not getting closed</u>.</b>
<b>So, now my question is, am I using the right API to connect and disconnect??</b>
Please help me in this. This is very urgent.
Regards,
Narahari
Hi all,
Yes. Like Valery has pointed out, if i try to use JCO.Client.disconnect(), it throws the following exception:-
com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: A client allocated from pool PROD_MODELDATA_RFC_sunih1_EN_useDefinedUser cannot be disconnected directly. Please, use JCO.releaseClient(JCO.Client) instead.
So can I use the following lines:-
JCO.releaseClient(client);
connection.release();
if (client.isAlive()){
client.disconnect();
Regards,
Narahari
Similar Messages
-
Problem with reached maximum number of connections to database
Dear Experts,
Our Production system was not responding properly last week.
The below was the reply from the Basis team.
"It seems that we have again problem with reached maximum number of connections to database. We have extended this number to 100 this year and now it seems that it’s not enough again. It seems that something is running on Production, which takes over too many connections."
They have increased the number to 200 as a work around.
Do we have any means to find out, which component or application is causing the issue.
Please advise me if any better way is available to correct the issue.
Please see the below trace.
From default trace:
======
Caused by: com.sap.engine.services.dbpool.exceptions.BaseSQLException: ResourceException occurred in method ConnectionFactoryImpl.getConnection(): javax.resource.R
esourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to DB or EIS is reached. You
can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unreachable. 3) Connections ar
e not enough for current load.
at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:60)
at com.sap.security.core.persistence.datasource.imp.J2EEConnectionPool.getConnection(J2EEConnectionPool.java:205)
... 61 more
Caused by: javax.resource.ResourceException: (Failed in component: dbpool, BC-JAS-TRH) Cannot create connection. Possible reasons: 1)Maximum allowed connections to
DB or EIS is reached. You can apply CSN Note 719778 in order to check and resolve connection leaks. 2) Configuration to DB/EIS is wrong or DB/EIS is temporary unr
eachable. 3) Connections are not enough for current load.
at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:230)
at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:343)
at com.sap.engine.services.connector.jca.ShareableConnectionManager.allocateConnection(ShareableConnectionManager.java:54)
at com.sap.engine.services.dbpool.cci.ConnectionFactoryImpl.getConnection(ConnectionFactoryImpl.java:52)
... 62 more
Caused by: com.sap.engine.services.dbpool.exceptions.BaseResourceException: SQLException is thrown by the pooled connection: com.sap.sql.log.OpenSQLException: No c
onnection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are currently waiting. The connection pool size might
need to be adjusted.
at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:192)
at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:221)
... 65 more
Caused by: com.sap.sql.log.OpenSQLException: No connection to data source SAPEPPDB available. All 100 pooled connections are in use and 70 connection requests are
currently waiting. The connection pool size might need to be adjusted.
======
Thanks and Kind Regards,
JelbinStop all instances(including DB) and start again, Hope it should work.
It may happened that jar has not been synchronized with the database and may be version mismatch with the java.
719778 - Data Source fails to return connection
1650472 - Transactions are interrupted due to database connection periodically failing to establish
1138877 - How to Deploy External Drivers JDBC/JMS Adapters
Change the connection pool so that it can connect to DB as per the note 719778
Regards
Vijay Kalluri -
Maximum number of connections in use. Close an act...
Hi everyone.
I try to connect my N95 to internet, using "One Touch Access" and USB. It used to be working ages ago! but now, it is impossible. it gets connected with the phone, but when i want to open a web page, it say "maximum number of connections in use. Close an active connection first", and forces me to close my Modem connection, and everything gets disconnected...
what should i do????
help please...97268450 wrote:
when i open face book application,the same problem maximum number of connection in use. Close an active connection first. i have nokia 5233
This issue was already answered by other threads. You can click here and here for more information.
Hope this will help you. -
Maximum number of connections in use?! -E71
Hi, I have this problem when I try to connect to the internet through any program. Before you rush to reply, I WANT to have multiple programs using the internet at the same time. I find it completely idiotic having to close Nokia Messaging to open my web browser. I want to be able to run Nimbuzz while running Nokia Messaging (example). Funny thing is, if I select OK when it asks me to close a connection, and then just cancel, everything works ok!! Well, for a while, and then the message pops up again.
Come on Nokia, it's just a simple solution, how hard can it be?
PS. Using E71 with the latest firmware (200)You can use multiple applications using the internet at any time but ONLY one access point can be in use.
you cant be connected with more then one access point therefore if the different applications is set up to use different access points then you will have the maximum number of connection issues.
Just like the Computer if you are connected to the internet and you connect your phone as a modem the connection from your phone will overwrite the connection and be the default connection.
You may change the settings in the individual applications in the options > settings (may vary from applications)
Mark me a KUDOS if this has helped... -
Nokia N8-00 'maximum number of connections in use'
Hi,
I have creted another APN in the Destinations-Internet settings. Put this APN on priority 1. Then I se internet an it is ok. But when I open Nokia Maps or another App. Sometimes it tries to connect to the old APN then says 'maximum number of connections in use'. Asking me for confirmation to close one connection.
So I move all APN's and Wireless connections out of the Destination Internet. Except for the new on that I want. Still the same message From time to time. How to stop thi message. Deleting an APN is not a solution I am looking for otherwise I would have done that.
Any help is appreciated.So the on off method I posted earlier did not work. The first APN is still tring to be accessed by some apps after the phone is switched off and on again. The other things I tried..
- Removed the APN restriction and renamed the first APN. When I start the APP it now gives me a warning and lets me choose the APN. I choose the second one so greate. Close the APP. Now when I rename the fisr APN to the original name. APPS try to access it again and I get that original error.
The only thing I could do is configure the first APN name with the actual Access Point of the second APN. This worked All apps are accessing the first APN whaich was reconfigured to look like the new Second APN.
This is not a solution again it is a workaround. Does anyone-else have this problem. Or am I the only one who is configuring multiple APNs. Since my provider has multiple APNs.
I would have thought that this phone supports Multiple PDP contexts, or Secondary PDP context. It was defined in the initial 3GPP specs way back in 2003ish. Nokia can you confirm???
Cheers Peps! -
Number of connections in a JDBC pool
Hi,
I am running Sun One Webserver 6.1SP4 on Solaris 8 on sparc machines. My web app interacts with Oracle 9.2 using the web server's jdbc pooling mechanism. Everything works fine, but what worries me is the number of connections always goes up even during nights when the traffic is considerably low compared to day time. Here is part of my server.xml relevant to the pool.
<JDBCCONNECTIONPOOL name="spfc-dbp1" datasourceclassname="oracle.jdbc.pool.OracleDataSource" steadypoolsize="8" maxpoo
lsize="80" poolresizequantity="8" idletimeout="300" maxwaittime="10000" connectionvalidationrequired="on" connectionvalidati
onmethod="auto-commit" validationtablename="" failallconnections="off" transactionisolationlevel="read-committed" isolationl
evelguaranteed="on">
I checked all my code to make sure I am calling close() on result sets, statements and the connection itself both immediately after completing work as well as in the finally blocks.
The only mechanism I have to bring down the number of connections is to restart the web server. I played around with the poolresizequantity, idletimeout properties, but it didn't help much.
I thank all of you in advance for any insights.
-SharmaHi Sharma,
I have a similar problem.
Starting my portal and it works for about ten minutes. Then it is unreachable, because of an ProfileException error. I guess it is too many DB Connections.
I can do 2 things:
- wait for about 20minutes and it works again for ten minutes, or
- restart tomcat.
Currently I am setting up a new Connection Pool, Jdbc2Pool.
Did you find a solution to your problem?
Ciao,
Axel -
Why can I not connect any apple i pad to our e fibre. All other devices connect no problem
We are a tourism service provider and since we have upgraded to e fibre we are not able to connect any apple i pads to our WiFi.All othe devices connect no problem. What is the solution to this issue.
Hi carramore,
The best advice I can offer is to contact our support team on 1890 260 260 (telephone number and option 0) or use our webchat facility - http://www.eircom.net/about/contact/
They'll be able to help you with this, it will just be a settings change over.
Thanks
Tracey -
Query: The number of connections possible on APEX
Hi all,
Hope you all are doing good.
there is one query,
Does the number of connections to apex depends on database memory ???
Is there any limitation on number of connections at the same time ?
i have one application,
APEX 4.1
DB 11.2.0.2
when it was launched.., people tried to login and as soon as they logged in the poratl/application went down. had to bounce the DB to get it back.
was clueless on what would be the reason for this behavior.
how do i make sure this would not occur again..,
thanks and regards,
LittlefootHi Dietmar,
i have the same assumption, but the problem here the user is facing is, they have used some java scripts to upload the excel sheet and when uploading it the apex portal goes down.
they are still testing it, expected user to login is around 600 at the same time.
From the db side :
SQL> sho parameters sga
NAME TYPE VALUE
lock_sga boolean FALSE
pre_page_sga boolean FALSE
sga_max_size big integer 3808M
sga_target big integer 0
SQL> sho parameters job_queu
NAME TYPE VALUE
job_queue_processes integer 1000
SQL> sho parameters large
NAME TYPE VALUE
large_pool_size big integer 0
use_large_pages string TRUE
SQL> sho parameters java
NAME TYPE VALUE
java_jit_enabled boolean TRUE
java_max_sessionspace_size integer 536870912
java_pool_size big integer 1424M
java_soft_sessionspace_limit integer 536870912they are getting the error : ORA-04031: unable to allocate 91992 bytes of shared memory
how do we remove the error..,
any help on this.
additional details : server has 12GB ram.
thanks and regards,
littlefoot -
Please I need help regarding this problem I faced today.
I updated my payment method because I changed my Internet MasterCard of the same number but new expiry date but not accepted , can you help me?Is the iPhone jailbroken or was jailbroken?. In the article " http://support.apple.com/kb/TS3694 " it says:
Errors related to downgrading iOS
The required resource can't be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go toSettings > General > About and check the version of iOS on the device. If it's newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version isn't supported.
Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state. -
J2EE StartUp Problem, URGENT.
Hi all!
I'm having a problem since friday with the J2EE Engine Startup. The problem is that MMC says me that the server is running but i can access to the server by anyway. The developer trace of the jcontrol process is:
[Thr 2968] Tue Aug 09 13:59:50 2005
[Thr 2968] JControlICheckProcessList: process server0 started (PID:1544)
JStartupStartJLaunch: program = C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
-> arg[00] = C:\usr\sap\J2E\JC00/j2ee/os_libs/jlaunch.exe
-> arg[01] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_toshiba-user
-> arg[02] = -DSAPINFO=J2E_00_sdm
-> arg[03] = -file=C:\usr\sap\J2E\JC00\SDM\program\config\sdm_jstartup.properties
-> arg[04] = -nodeName=sdm
-> arg[05] = -nodeId=2
-> arg[06] = -syncSem=JSTARTUP_WAIT_ON_2964
-> arg[07] = -jvmOutFile=C:\usr\sap\J2E\JC00\work\jvm_sdm.out
-> arg[08] = -stdOutFile=C:\usr\sap\J2E\JC00\work\std_sdm.out
-> arg[09] = -locOutFile=C:\usr\sap\J2E\JC00\work\dev_sdm
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=C:\usr\sap\J2E\SYS\profile\J2E_JC00_toshiba-user
-> lib path = PATH=C:\j2sdk1.4.2_08\jre\bin\server;C:\j2sdk1.4.2_08\jre\bin;C:\oracle\WAS\92\bin;C:\oracle\WAS\92\jre\1.4.2\bin\client;C:\oracle\WAS\92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_08\bin;C:\oracle\WAS\92\Appache\perl\5.00503\bin\MSWin32-x86;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
-> exe path = PATH=C:\j2sdk1.4.2_08\bin;C:\usr\sap\J2E\JC00\j2ee\os_libs;C:\oracle\WAS\92\bin;C:\oracle\WAS\92\jre\1.4.2\bin\client;C:\oracle\WAS\92\jre\1.4.2\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_08\bin;C:\oracle\WAS\92\Appache\perl\5.00503\bin\MSWin32-x86;C:\usr\sap\J2E\SCS01\exe;C:\usr\sap\J2E\JC00\exe;C:\usr\sap\J2E\SYS\exe\run
[Thr 2968] Tue Aug 09 13:59:51 2005
[Thr 2968] JControlICheckProcessList: process SDM started (PID:1556)
[Thr 1188] Tue Aug 09 14:01:01 2005
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] Tue Aug 09 14:01:58 2005
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] JControlMSMessageFunc: receive command:6, argument:1213679940 from Message Server
[Thr 1188] Tue Aug 09 14:10:25 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:15:45 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:20:46 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:26:06 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:31:07 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:36:27 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:41:28 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
Then i try to login the visual admin gives me a windows error and the msg_server process shuts down alone. Then i restart that node and agregate the following lines to the trace:
Thr 1188] Tue Aug 09 14:42:25 2005
[Thr 1188] *** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c 2488]
[Thr 1188] *** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c 1652]
[Thr 1188] Tue Aug 09 14:42:27 2005
[Thr 1188] ***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi_r.cpp 8588]
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c 633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c 295]
[Thr 1188] Tue Aug 09 14:42:32 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c 633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c 295]
[Thr 1188] Tue Aug 09 14:42:38 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c 633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c 295]
[Thr 1188] Tue Aug 09 14:42:44 2005
[Thr 1188] *** ERROR => MsIAttachEx: NiBufConnect to toshiba-user/3601 failed (rc=NIECONN_REFUSED) [msxxi.c 633]
[Thr 1188] *** WARNING => Can't reconnect to message server (toshiba-user/3601) [rc = -100]-> reconnect [jcntrms.c 295]
[Thr 1188] Tue Aug 09 14:42:49 2005
[Thr 1188] JControlMSConnect: reconnected to message server (toshiba-user/3601)
[Thr 1188] Tue Aug 09 14:48:11 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:53:12 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
[Thr 1188] Tue Aug 09 14:58:32 2005
[Thr 1188] JControlMSReadMessage: NiPeek() returns -5 NIETIMEOUT
I try to login the visual admin again and gives me the following error: "Cannot open connection on host: 191.9.6.22 and port: 50004"
Looking the log and trace files i see the following errors:
- SAPEngine_System_Thread[impl:5]_5##0#0#Error#1#/System/Server#Plain###Encomi: failed to connect to toshiba-user/3201(Connection refused: connect)#
- java.net.SocketException: socket closed
at java.net.PlainSocketImpl.socketAccept(Native Method)
at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:353)
at java.net.ServerSocket.implAccept(ServerSocket.java:448)
at java.net.ServerSocket.accept(ServerSocket.java:419)
at com.sap.engine.core.port.impl0.ServerSocketListener.run(ServerSocketListener.java:87)
- erver socket listener opened by service on socket encountered error. The listener will be stopped.#2#p4#ServerSocket[addr=/0.0.0.0,port=0,localport=50004]
I dont know whats happening, if somebody knows i hope that helps me. Please is urgent.
Thx and Rgds.
GregoryHi, thx a lot both.
Respect the link
http://<hostname>:50<instanceno>00/sap/monitoring/SystemInfo , i cant access it. I cant access by telnet, by visual admin.
In the work folder under \usr\sap\<sid>\JC00 i found that the last updated files are:
- available.txt that contains the following data:
Unavailable 08.08.2005 10:46:53 - 08.08.2005 10:58:54
Available 08.08.2005 10:59:54 - 08.08.2005 13:52:54
Unavailable 08.08.2005 13:53:54 - 08.08.2005 13:53:54
Available 08.08.2005 13:54:54 - 08.08.2005 14:03:54
Unavailable 08.08.2005 14:04:54 - 08.08.2005 14:04:54
Available 08.08.2005 14:05:54 - 08.08.2005 14:34:54
Unavailable 08.08.2005 14:35:54 - 08.08.2005 14:39:44
Unavailable 08.08.2005 14:56:17 - 08.08.2005 16:24:13
Unavailable 08.08.2005 16:28:07 - 08.08.2005 16:29:07
Unavailable 08.08.2005 16:34:36 - 08.08.2005 17:17:58
Unavailable 09.08.2005 08:13:36 - 09.08.2005 08:54:33
Unavailable 09.08.2005 08:57:04 - 09.08.2005 12:46:25
Available 09.08.2005 12:47:25 - 09.08.2005 13:26:25
Available 09.08.2005 13:43:56 - 09.08.2005 13:55:56
Unavailable 09.08.2005 13:56:40 - 09.08.2005 14:04:57
Available 09.08.2005 14:05:57 - 09.08.2005 16:16:57
Unavailable 09.08.2005 16:17:57 - 09.08.2005 17:27:12
Unavailable 10.08.2005 08:10:30 - 10.08.2005 08:35:39
Available 10.08.2005 08:36:39 - 10.08.2005 09:16:39
Available 10.08.2005 12:33:51 - 10.08.2005 14:01:51
- dev_jcontrol that contains the information displayed in the developer trace of jcontrol process(and y mentioned above)
- dev_dispatcher that contains the following info:
[Thr 2664] Wed Aug 10 08:33:04 2005
[Thr 2664] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 2664] JLaunchISetClusterId: set cluster id 5761000
[Thr 2664] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 2664] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 3320] Wed Aug 10 08:33:21 2005
[Thr 3320] JLaunchISetP4Port: set p4 port 50004
[Thr 3528] Wed Aug 10 08:33:26 2005
[Thr 3528] JLaunchISetTelnetPort: set telnet port 50008
[Thr 3528] JLaunchISetTelnetPort: set telnet port 50008
[Thr 3584] Wed Aug 10 08:33:55 2005
[Thr 3584] JLaunchISetHttpPort: set http port 50000
[Thr 2664] Wed Aug 10 08:34:02 2005
[Thr 2664] JLaunchISetState: change state from [Starting (2)] to [Running (3)]
[Thr 2568] Wed Aug 10 08:34:08 2005
[Thr 2568] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 3660] Wed Aug 10 08:35:07 2005
[Thr 3660] JLaunchISetP4Port: set p4 port 50004
[Thr 3600] Wed Aug 10 08:36:34 2005
[Thr 3600] JLaunchISetHttpPort: set http port 50000
[Thr 3612] Wed Aug 10 12:43:40 2005
[Thr 3612] JLaunchISetHttpPort: set http port 50000
[Thr 3612] JLaunchISetP4Port: set p4 port 50004
[Thr 3612] JLaunchISetTelnetPort: set telnet port 50008
- dev_server0 that contains:
[Thr 2676] Wed Aug 10 08:33:06 2005
[Thr 2676] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 2676] JLaunchISetClusterId: set cluster id 5761050
[Thr 2676] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 2676] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 4296] Wed Aug 10 08:34:58 2005
[Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 4296] Wed Aug 10 08:35:00 2005
[Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPConverters
[Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPCharToNUCByteConverter
[Thr 4296] Wed Aug 10 08:35:01 2005
[Thr 4296] JHVM_RegisterNatives: registering methods in com.sap.mw.jco.util.SAPNUCByteToCharConverter
[Thr 2676] Wed Aug 10 08:35:07 2005
[Thr 2676] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
[Thr 208] Wed Aug 10 08:36:34 2005
[Thr 208] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
I still dont know whats happening. And i need to solve the problem urgent. I hope u can help me.
Thx and Rgds.
Gregory. -
Unable to connect DI API-----urgent
Hi experts,
i am using SAP 2007B. When i am trying to connect the xlreporter i am getting the message that
UNABLE TO CONNECT DI API SERVER TYPE MISMATCH
Please help me out to solve this problem urgently
thanks in advance
regards
Ashish gupteHi Ashish
As of version 2007 you must specify the server type for the DI API. Here is a sample:
Dim vCmp As SAPbobsCOM.Company
Dim lRetCode, lErrCode As Long
Dim sErrMsg As String
Set vCmp = New SAPbobsCOM.Company
vCmp.Server = "(local)"
vCmp.CompanyDB = "MYDATABASE"
vCmp.UserName = "manager"
vCmp.Password = "manager"
vCmp.DbUserName = "sa"
vCmp.DbPassword = "xxxxxxx"
vCmp.DbServerType = dst_MSSQL2005
vCmp.UseTrusted = False
lRetCode = vCmp.Connect
If lRetCode <> 0 Then
vCmp.GetLastError lErrCode, sErrMsg
End If
Note the line for DbServerType.
Kind regards
Peter Juby -
Thread number per connection crash 4.16
We are using a program in a loop, we add 500 entry in 2 minutes. If the
thread number per connection is set to 5 or 10, the Netscape Directory
Server 4.16 got disorderly shutdown and dump a core. If we set this as 1,
the server works fine.
Could you please tell me what is the problem? Is this version not reliable?
Thanks,
PeterPeter Pan wrote:
We are using a program in a loop, we add 500 entry in 2 minutes. If the
thread number per connection is set to 5 or 10, the Netscape Directory
Server 4.16 got disorderly shutdown and dump a core. If we set this as 1,
the server works fine.
Could you please tell me what is the problem? Is this version not reliable?What does it say in your error log? Is the number of threads per connection times the number of connections greater than the
threadnumber? Are you sure you have tuned your kernel parameters to allow a large number of threads per process and per kernel?
>
>
Thanks,
Peter -
MY NUMBER DOUBLE CONNECTED ON VIRGIN & BT AT SAME ...
I ported my number from Virgin and I have been calling BT India many times and they keep making me do random tests, wasting hours of my time, then at the end of it all telling me they cannot fix the problem. Each time I have to explain the problem which is a mission in itself and they just keep telling me I am connected and there are no problems!
The problem is:-
I ported my number from Virgin to BT. As it stands the number is active on both Virgin and BT and I can make outgoing calls on both. Incoming calls are going to Virgin or BT. So effectively I am paying for both! I’ve contacted Virgin and they are saying they have released the number; BT is saying the number port has gone through without any issues.
When I call BT India, it takes an absolute age to explain, then to add insult to injury they tell me the line is connected without problems. So having called 150 from the BT landline I ask them to make a call to my number while I’m on the phone, when they do and it connects to the Virgin phone. Then I hold the BT phone against the Virgin handset and let them listen to BT ‘hold’ music! Then they believe me!
Can anyone help with my problem?If you still have dial tone on your VM socket and your Openreach socket, dial 17070 from both and see if they both report the same number, if they do, then call your landline number from a mobile, or mobiles if you can if they are on different networks and see which socket 'rings' the VM one of the OR one..also if possible call your landline from another landline , if any of the calls make the BT/OR socket ring, then BT have imported your number, but if any ring the VM socket ring, then the port has not been done correctly by VM but unless you can call VM and speak to someone about it, you will probably have to get BT to raise a fault report, to get VM to check they have done the number port correctly
-
FMS2 core dies after a number of connections
Howdy folks
My company developed a flash video chat (adult related)
application. We have intensively tested the application without
problems on the developer edition of FMS and afterwards we decided
to buy a license. We have configured the license on the
1000/40/unlimited and fired the site up. But here's the problem.
After a certain number of connections (we counted at about 40
simultaneous streaming sessions plus let's say an average of 2
guests per each stream) the core goes off and dies, therefore not
loading the video anymore. Each time this happends we need to
restart the FMS and it's working fine for another period of time.
The system FMS2 is running on is a Dual Intel Xeon 3.2 Ghz with 4
GB of RAM. The processors are running at about 30 - 40% of their
capacity right before the core goes down.
Anyone else had any similar experience and if yes what was
the solution? Any help is greatly apreciated. Looking forward to
hear from the community.
Warm Regards
Andyquote:
Originally posted by:
anonymous thing
quote:
i'm running fms on the same box with apache/mysql/dns+mysql
We had the same problem: video freeze, etc... and it was
related to the fact that we were running Web Server and FMS on a
single server. It was not the only source of problem : we converted
video/audio file with ffmepg on the fly and it was the thing that
kill our FMS process. We now use several server and everything look
fine....
The best thing to do will be to split your server task(web,
FMS and other) among several server and in this case they don't
need to be incredible beast!
Hey anonymous
Thanks for the feedback. I've been adviced by so many persons
in so many ways but based on flv streaming scenarios. I do not do
that. I am in to a many-to-many scenario where the application
instances (sources of stream) come and goes dinamicaly. I get their
webcams and stream them to any potential viewers.
In the flv streaming case the fix for this issue is simple. I
set the <Scope> to inst and define RollOver and MaxCores
values and i have no stress since the cores will be replacing each
other at the defined period of time.
But in my case (many-to-many) i cant run the fms with the
Scope inst but only as app.
Anyway .. i do hope(think) that separing FMS will solve this
issue.
Regards
Andy -
I see a number of these events on my Lync 2010 Server. NSlookup shows that 75.0.230.1 is an sbcglobal.net server. (See bolded text.) I have no federation or other connections to sbcglobal.net or AT&T, so why is my Lync server attempting to contact this
server (and others) at all?
Log Name: Lync Server
Source: LS Protocol Stack
Date: 3/14/2014 11:34:30 AM
Event ID: 14502
Task Category: (1001)
Level: Error
Keywords: Classic
User: N/A
Computer: EdgeServer.mydomain.com
Description:
A significant number of connection failures have occurred with remote server IP 75.0.230.1. There have been 75 failures in the last 184 minutes. There have been a total of 75 failures.
The specific failure types and their counts are identified below.
Instance count - Failure Type
75 0x80072746(WSAECONNRESET)
This can be due to credential issues, DNS, firewalls or proxies. The specific failure types above should identify the problem.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Protocol Stack" />
<EventID Qualifiers="50153">14502</EventID>
<Level>2</Level>
<Task>1001</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-03-14T16:34:30.000000000Z" />
<EventRecordID>32141</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>EdgeServer.mydomain.com</Computer>
<Security />
</System>
<EventData>
<Data>75.0.230.1</Data>
<Data>
</Data>
<Data>75</Data>
<Data>184</Data>
<Data>75</Data>
<Data>75</Data>
<Data>0x80072746(WSAECONNRESET)</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
Blog /
Facebook / TwitterTo combat the issue, enable an HLB port on your FE servers (or any other pool you are using HLB on) and configure the health checks for the load balancer to use that port instead of the port used for TLS traffic.
Start by configuring the pool in Topology Builder, right click the pool, and choose Edit Properties>General. Place a check in the “Enable Hardware Load Balancer monitoring port” and specify a port.
Also you can refer below link
http://ocsguy.com/2011/11/02/lync-hardware-load-balancer-monitoring-port/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Maybe you are looking for
-
Definnig logical path and file names
hallow experts, i wont to now about definnig logical path and file names, did some one have something that can help me in that regards
-
System Alerts for Bank Guarantees and Letter of Credits
Hi My requirement is to get system alerts when the the Letter of Credit(LOC) or Bank Guarantee (BG) is going to be expired. We are using Third Party software for master data and other information related to Letter of credit. In SAP ,I will do spec
-
Changing Default Font in Acrobat 7 and/or Acrobat Reader 9
Anyone know how to change the Default Font in Acrobat 7 and/or Acrobat Reader 9? Whenever I open a PDF document the text defaults to a Times New Roman or basic font. Can we change the default font?
-
Hi all, I'm trying to run the samples that are bundled with the java_xml_pack-summer-02_01. To be specific i tried running the SAXLocalNameCount.java. when i try to run this i get the following error message org.xml.sax.SAXException: Error:schema_ref
-
Unable to install and also unable to uninstall
I am trapped in an infinite installation loop. Well, not exactly. I am unable to re-install my IDE and relevant servers. The log indicates that the installation is being skipped because the studio, etc. is already installed. I have tried cleaning the