Numbering list problem

I'm using a font which allows me to switch teh number case between Old STyle figures and Lining Figures. How? (The "A"-button then left-bottom-button and chose Typography - This only works with fonts like Didot, Junicode, Myriad Pro, Palatino Linotype).
However, when I chose a numbering list, Pages choses the Lining Figures and I cannot change them into Old Style figures.
Does anyone have a solution?
Thanx!
Floris

Are all of the question in one text thread or are they in separate
frames? If they are in separate frames, you're going to see the behavior
you have since the numbering is done based on the order they're created.
Bob

Similar Messages

Robohelp 9 numbered HTML lists problem

I'm having problems with HTML lists in Robohelp 9 that are converted from linked Framemaker 10 xml files. The list numbering restarts from zero after the 9th item and I can't find anywhere that could be configured!
The configuration for the conversion in the Robohelp 'Conversion settings' for the relevant numbered list paragraph in Framemaker is 'Convert autonumber to HTML list'.
Many thanks in advance for any pointers.
Regards,
Nick

Are you sure it actually restarts from zero? Have you checked the HTML code? My initial thought after reading this was that you might have some issues with CSS margins and alignments hiding the number in front of your zero. Numbers that should be 10, 11 etc. but shows up as 0,1, 2,3 etc.. Anyways, I would post an image that visualizes your output from RH.
Edit: Have you tested a larger list (20+) to see if things are repeated?

Problem with a numbered list

I recently upgraded to RoboHelp 8 and I opened my old project to update an HTML online help. Whenever I generated the online help and I clicked to view the result on the PC with RoboHelp 8, everything looked fine. Then, I copied all generated files to a server to be part of a web application. Today, I found out that when I viewed the online help on the server using the same PC with RoboHelp 8, all numbers of numbered lists displayed against the left side of the main body of the help are not displayed correctly. Part of each number got chopped off. Again, if I go to the !SSL! folder and display the online help that I generated, it looks fine. I also found out that when I used another PC to view the same online help file from the server, all the numbered lists looked fine. The PC with RoboHelp 8 runs with Windows 7 Enterprise 64 bit and the PC that I could see the numbered lists correctly runs with Windows 7 Professional 64bit. I don't understand why the two PCs do not display the same online help the same way. I asked someone to use his PC running Windows XP with IE7 and the numbered lists were not displayed correctly.
I read some discussions and there were a suggestion to use the "Convert RoboHelp Edited Topics to HTML" option to correct some problems with RoboHelp 8, so I tried it and it seemed to help. When using the option, I could see the numbered lists correctly. I am still wondering why two PCs did not display the same online help the same way. I am trying to see if there is an option with IE that can be used to solve this problem instead of deploying a new version of the online help. Does anyone know what the "Convert RoboHelp Edited Topics to HTML" option actually does. Will I be introducing more problems using this option?
RJ

Thank you very much for replying. The convert option seems to fix the problem and I will probably redo my lists later because I did not seem to be able to make any changes to them.
I am still puzzled why one PC running the 64 bit Windows 7 Pro is able to display all numbered lists correctly and the other PC running the 64 bit Windows 7 Enterprise using the same version of Internet Explorer is not able to display any numbered lists correctly. I looked around with all the options for Internet Explorer and they are the same. I also noticed that when I used Google Chrome and FireFox, the numbered lists are displayed fine. I also noticed that if all the online help files are saved locally on the PC that is not able to displayed the numbered lists correctly, when I display the online help, the numbered lists look fine. It does not work when displaying the online help from a server. If you know an option that might make the online help to work properly with Internet Explorer without deploying a new version, please let me know.
Thanks,
RJ

The bullet list, numbered list and the normal text is not converting when I am converting from RH 9 to MS Word 2010

Hi all,
Greetings for the day
I am created a new CSS in Robohelp 9. I have also created a new template in Word 2010. The style sets for different information elements like (Heading, bullets, body text, ) are more or less same between the CSS and the new templates. I am also able to map the .css styles to Word template when I am converting from RH to Word as I am getting the necessary option in the drop-down list.
However, when the output is generated, the bullet, the numbered list and the body text is not converting at all. The body text works sometimes. However, the numbered list and bullet list is coming out as images.
If anybody knows the solution, I can share the .css and Word template.
Thanks in advance.
Regards,
Parag Deb

Create a new project with two or three topics containing lists of both types. Generate a printed output that shows the problem. Then zip it up and send it to me. See the Contact page on my site for instructions.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How can I customize Microsoft Word Outline Numbered List Templates with AppleScript?

I wrote an applescript to set up a word document with the appropriate styles to give the document an academic setup, much like what Xelatex produces. This is a work in progress and I have a problem.
I have successfully applied the style changes to each Header and I have applied the desired outline numbered list template "list template 5 of list gallery 3", however I would like to add tab stops to each one in order to make each header look slick like in Latex.
To do what I want manually in Microsoft Word 2011 mac I would click Bullets and Numbering, customize, under text position i would check the tab stop box and put in some value (1 cm, for example)
The following is an approximation of the result of running this script on a document with headings 1-9 applied consequently to each line, respectively. Note how they are not even. I think this is an issue with the template, but I want to be able to run this script on any mac without extra template files.
1    Heading 1
1.1    Heading 2
1.1.1    Heading 3
1.1.1.1    Heading 4
1.1.1.1.1    Heading 5
1.1.1.1.1.1 Heading 6
1.1.1.1.1.1.1        Heading 7
1.1.1.1.1.1.1.1Heading 8
1.1.1.1.1.1.1.1.1 Heading 9
Here is the script so far:
Academic Paper Setup
Copyright © 2012 macmadness86
Just kidding there is no copyright. Open Source rules!
You may use this code however you like. It would be nice
if you made reference to the original code when sharing.
THINGS TO DO:
find a fix for changing font color of headings without hardcoding it.
fix headings 4-9
(*<Properties to be set by the user*)
--number suffix corresponds to heading 1, heading 2, etc.
--NOTE: To change the coloring of headings, it must be hardcoded. must find a fix.
property fontName1 : "CMU Serif Roman"
property fontName2 : "CMU Serif Roman"
property fontName3 : "CMU Serif Roman"
property fontName4 : "CMU Serif Roman"
property fontName5 : "CMU Serif Roman"
property fontName6 : "CMU Serif Roman"
property fontName7 : "CMU Serif Roman"
property fontName8 : "CMU Serif Roman"
property fontName9 : "CMU Serif Roman"
property fontSize1 : 15
property fontSize2 : 14
property fontSize3 : 13
property fontSize4 : 12
property fontSize5 : 12
property fontSize6 : 12
property fontSize7 : 12
property fontSize8 : 12
property fontSize9 : 12
property boldTF : true
property italicTF : false
property highlightTF : false
(*Properties to be set by the user>*)
tell application "Microsoft Word"
    tell active document
        (*<normal code BLOCK*)
        set name of font object of Word style style normal to "CMU Serif Roman"
        set font size of font object of Word style style normal to 12
        set bold of font object of Word style style normal to false
        set italic of font object of Word style style normal to false
        set color index of font object of Word style style normal to black
        (*normal code BLOCK>*)
        (*<heading 1 code BLOCK*)
        set name of font object of Word style style heading1 to fontName1
        set font size of font object of Word style style heading1 to fontSize1
        set bold of font object of Word style style heading1 to boldTF
        set italic of font object of Word style style heading1 to italicTF
        set color index of font object of Word style style heading1 to black
        --set paragraph format left indent of paragraph format of Word style style heading1 to (centimeters to points centimeters 0) --indent sections relative to margin
        --set tab stop position of tab stop of Word style style heading1 to (centimeters to points centimeters 1)
        --set tab hanging indent of paragraph format of Word style style heading1 to count 1
        (*heading 1 code BLOCK>*)
        (*<heading 2 code BLOCK*)
        set name of font object of Word style style heading2 to fontName2
        set font size of font object of Word style style heading2 to fontSize2
        set bold of font object of Word style style heading2 to boldTF
        set italic of font object of Word style style heading2 to italicTF
        set color index of font object of Word style style heading2 to black
        (*heading 2 code BLOCK>*)
        (*<heading 3 code BLOCK*)
        set name of font object of Word style style heading3 to fontName3
        set font size of font object of Word style style heading3 to fontSize3
        set bold of font object of Word style style heading3 to boldTF
        set italic of font object of Word style style heading3 to italicTF
        set color index of font object of Word style style heading3 to black
        (*heading 3 code BLOCK>*)
        (*<heading 4 code BLOCK*)
        set name of font object of Word style style heading4 to fontName4
        set font size of font object of Word style style heading4 to fontSize4
        set bold of font object of Word style style heading4 to boldTF
        set italic of font object of Word style style heading4 to italicTF
        set color index of font object of Word style style heading4 to black
        (*heading 4 code BLOCK>*)
        (*<heading 5 code BLOCK*)
        set name of font object of Word style style heading5 to fontName5
        set font size of font object of Word style style heading5 to fontSize5
        set bold of font object of Word style style heading5 to boldTF
        set italic of font object of Word style style heading5 to italicTF
        set color index of font object of Word style style heading5 to black
        (*heading 5 code BLOCK>*)
        (*<heading 6 code BLOCK*)
        set name of font object of Word style style heading6 to fontName6
        set font size of font object of Word style style heading6 to fontSize6
        set bold of font object of Word style style heading6 to boldTF
        set italic of font object of Word style style heading6 to italicTF
        set color index of font object of Word style style heading6 to black
        (*heading 6 code BLOCK>*)
        (*<heading 7 code BLOCK*)
        set name of font object of Word style style heading7 to fontName7
        set font size of font object of Word style style heading7 to fontSize7
        set bold of font object of Word style style heading7 to boldTF
        set italic of font object of Word style style heading7 to italicTF
        set color index of font object of Word style style heading7 to black
        (*heading 7 code BLOCK>*)
        (*<heading 8 code BLOCK*)
        set name of font object of Word style style heading8 to fontName8
        set font size of font object of Word style style heading8 to fontSize8
        set bold of font object of Word style style heading8 to boldTF
        set italic of font object of Word style style heading8 to italicTF
        set color index of font object of Word style style heading8 to black
        (*heading 8 code BLOCK>*)
        (*<heading 9 code BLOCK*)
        set name of font object of Word style style heading9 to fontName9
        set font size of font object of Word style style heading9 to fontSize9
        set bold of font object of Word style style heading9 to boldTF
        set italic of font object of Word style style heading9 to italicTF
        set color index of font object of Word style style heading9 to black
        (*heading 9 code BLOCK>*)
    end tell
    (*<apply numbering to the sections code BLOCK*)
    set selFind to find object of selection --selects text of execute find command
    clear formatting selFind --reset selFind just to make sure
    set style of selFind to style heading1 --set style we are looking for
    execute find selFind find text "" wrap find find continue with find format and match forward
    if found of selFind is true then
        --display dialog (get content of text object of selection) --for debugging only
        (*<code BLOCK word__set paragraph style*)
        --I apply the formatting to the previously found text
        set myLT to list template 5 of list gallery 3 of active document
        apply list format template (list format of text object of selection) ¬
            list template myLT
    end if
    (*Apply numbering to the sections code BLOCK>*)
end tell

I figured it out . Just in case anyone else wants to know the script is below:
tell application "Microsoft Word"
    set myTable to table 1 of selection
    convert to text myTable separator separate by tabs
end tell

How do I set numbered lists for headings in Pages 5.2, and keep that system of numbered lists saved?

I have tried to set numbered lists for headings in Pages 5.2 but have not succeeded. I have read similar questions concerning this but this has not helped me...
When I say numbered lists I mean something extremely important and simple, for instance:
1. Introduction
1.1. Background
1.2. Purpose and Questions
2. The Legality of Clause X
2.1. Legality under Article 101.1
2.2. Legality under Article 101.3
And so on...
Heading 1. is selected as "Heading", 1.1 is selected as "Heading 2", and if I had 1.1.1 it would be selected as "Heading 3" and so on...
I have navigated my way to the Format window, and under the tab "Style" and down to "Bullets & Lists". I have here selected the following: Numbered, Numbers, 1. 2. 3. 4., Tiered Numbers, Continue from previous.
There are several problems with this currently.
First, based on the example it becomes "2. Background" when it should be "1.1 Background" instead.
Second, after writing some body text between the headings and then select a new heading, all the previously selected settings I mentioned above in "Bullets & Lists" have to be reselected.
So, how do I set numbered lists for headings, or so called sub-headings, in Pages 5.2? And how do I keep that selected system of numbered lists saved so I don't have to retype it for every new heading I type? (e.g. so that Pages knows that every time I choose Heading 2, I want it to number the heading in the way selected)
Obviously, manually writing the numbers for every heading is not a viable option, as it makes table of contents problematic and is simply tedious. You need an automatic way of doing it, especially if you write long documents where keeping headings in order is absolutely essential.
Also, reverting back to previous Pages versions (like v. 9 I think?) is not an option as that does not exist on my recently purchased Macbook Pro.
I need to be able to do this on Pages 5.2 and do it automatically.
I appreciate any help with this.

iWork '09 is not "outdated" it still works and works extremely well and whilst not perfect with MsWord it is far far better than Pages 5.2 which has a stream of major issues with exporting. It is also way better and faster to use than Microsoft Office.
So what is your time and work actually worth? If it is less than $19.99 for 6 months, you may as well just chuck it in and take that job on minimum wages.
You are assuming things for Office 2014 with absolutely no inside knowledge. Much as we assumed Pages 5 was going to be the long awaited improvement, but ended up being a downgrade to match the iOS version, Microsoft is headed the same way with their mobile versions.
This is not like getting the "latest" pair of pants where you go with the crowd and throw out your cigarette legs which replaced the flares, which replaced your low cuts which replaced your cigarette legs, which replaced…
This is work.
If it does the job and does it well, use it. There is nothing out there to really match what Pages '09 does. Yet.
LibreOffice can do most but not all, but has a UI that only a mother could love. It's great redemption is that it uses both open formats and the standard Microsoft formats and is under active development. It also opens and saves to just about everything. When they finally work out the Pages formats, I'm sure they will open those as well.
I use a lot of professional software. Just because the publisher's marketing department says change the product so we can sell more, doesn't mean you have to pay any attention whatsoever. Adobe being a classical example. Most designers are just ignoring their latest subscription based bloatware and getting on with their work.
Peter

How do I get rid of multiple phone numbers listed in iMessage and Facetime?

I just upgraded to the iPhone 5 and also upgraded my husband to the iPhone 4. I had originally activated his phone under my Apple ID but have since gotten him his own Apple ID. The problem I am having is that I have both of our phone numbers listed under:
Settings>Messages>Send & Receive>You can be reached by iMessage at:
It then lists my number and his number. Does anybody know how to delete his number? He seems to be getting some of my messages and his number is also listed under my Facetime contact numbers.

basically, you have to backup your phone to your computer, restart it, and set up as a new one. then you can start fresh, but still keep all your data and contacts.

Find numeric numbering list, Indesign CS3,Windows

1. I LIKE
a. Mango
b. Orance
2. Did you know
a. yes
b. no
In this two list I want only numeric numbering list. I wrote the javascript code like
text_frame.paragraphs[pa].bulletsAndNumberingListType;
but it shows all the numerice and alphabetic list.
Please Help

Thanks for the additional information, but unfortunately it still leaves me a bit confused. We have only used InDesign CS3 and CS4 with the regular Adobe Paragraph Composer, and it works just fine except for the one font - Adobe Thai. This font works well also except when a tone mark is needed above a punctuation mark - thats the only time we see a problem?
Can you read Thai? Your post confuses me, too. I see that no Thai fonts work correctly in CS4 without the World-Ready Composer turned on. I don't work in Thai very often - my SE Asian script expertise is concentrated in Lao, Cambodian, and Burmese - but I have some sample Thai randomly harvested from the Internet, and a collection of Thai fonts, and none of them work without the World-Ready Composer turned on. Follow the link I posted previously and read about it.
These are all generic MS fonts. I suppose that someone clever w/OpenType might be able to make a font that would render correctly in the normal Paragraph Composer, which is why I asked you to name any font that did work correctly in CS4 without the World-Ready Composer. I would like to know about it.
Even with the World-Ready Composer, I'm not willing to say that the Thai is being rendered well - I don't read Thai, so I am not suited to make judgments on good typography, but the Paragraph Composer examples above are obviously less correct than the World-Ready Composer examples.
I'm not even going to talk about CS3. Try this experiment yourself and post a screenshot.

How do I restart a numbered list?

Hello all,
First of all, I have to say, I can't believe how long it is taking me to set up my project. It seems like the most basic functionality in FM does not translate easily to RH. The lack of documentation around TCS3 Frame to Robohelp linking is simply unbelievable. Am I the only one who is frustrated and missing deadlines because of this?
Anyway, I have encountered another problem with numbered lists.
My list consists of two Framemaker paragraph tags. One that sets the counter back to 1 (used for the first item in a list), and then another tag for list items 2 and onwards.
Here is the problem:
I am using the Multilevel lists feature to set up my lists, which, for the most part works fine.
The only problem I am encountering is this:
when I have two lists within the same topic, I cannot get the second list to restart at 1! Has anyone been able to figure this out with the multilevel lists?
I know I can manually reset the counter from within Robohelp, but that defeats the purpose of linking my FrameMaker document. I cannot go and find all my lists in Robohelp and restart the numbering there. There has to be an automated way to do this.
Any ideas?
thanks.
Sue

Jeff:
I wonder if you had any luck creating a style that starts at one and mapping to it? I tried to do something similar, but ultimately came up against all the same problems I've been experiencing from the beginning linking FM>RH with numbered lists.
If you map to a single Paragraph and associated Multilevel List Style, you get this:
Heading 1
1.
2.
3.
Heading 2
4.
5.
6.
I thought I would be clever and try to duplicate the method for restarting numbered lists in FM (two styles, the initial number with style and <n=1> and subsequent number mapped to one style using <n+>.
I created two RH Paragraph Styles to map over. For each Paragraph Style, I used Autonumber, Create/Edit Custom Sequence to try to mimic this numbering sequence. The first style starts and one, and that works fine. But you run into the same problem when you create the second Autonumber list that starts at 2:
Heading 1
1.
2.
3.
Heading 2
1.
4.
5.
To be more clear, this is only a problem when you have more than one numbered list on the same page using the same numbering style.
This is a huge problem for those linking FM files in RH. Leaving the style as "source" in the mapping is unacceptable. For me it trails off the left side of the page and you cannot even see the number.
The only thing that comes close to a workaround is "convert to text." But the formatting is just terrible. There is no way to control the indentation between the number and the beginning text in the list. Since all of our documentation is task-oriented, with numbered steps, suddenly this shortcoming has just doomed all of our documentation to a terribly sloppy and unprofessional aesthetic.
If anyone has any other insights regarding how this could work, please contact me.
Thanks,
Douglas

Robohelp 10 output line spacing for numbered lists is off

I wondered if you have had this situation occur with your output from Robohelp 10.
I created my help system and CSS using Robohelp 10. My CSS contains a numbered list style and an alpha list style, both having line spacing of 3pt before and 3pt after. Looks great in Robohelp WYSIWYG, but the generated output (in IE and Chrome) looks bad. The numbered list line has way too much line spacing after (the next style is a non-numbered list style) and the alpha list has way too little line spacing.
I tried playing around with changing the line spacing but it does not change the output!
Thought I'd reach out to see if you have experienced this issue and the most expedient way to resolve.
Here is an example of HTML tags in Robohelp:
numbered list
<?rh-list_start level="1" an="1" class="rl-p-1ListNumber" start="1" style="list-style: rh-list;
list-style: rh-list;" ?><p class="1ListNumber">instruction text.</p><?rh-list_end ?>
alpha list
<?rh-list_start level="1" an="1" class="rl-p-Alpha" style="list-style: rh-list;
list-style: rh-list;" ?><p class="Alpha">Instruction text.</p><?rh-list_end ?>
thanks much

If you create a single topic project showing this problem and send it to me as directed on the Contact page of my site, I will take a look.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Creating numbered list via business rule in a form

The problem is explained in thread subject, i have a need to create a numbered list in a coulmn of some form via business rule.
i tried this, but numeration start from 1696 and adds 2 for every next row
FIX("plan1")
FIX("Final")
FIX("NormC_NA")
FIX("Local")
FIX("BegBalance")
FIX({RTP_Year})
FIX("AgrSN")
FIX("Administration")
FIX(@Descendants("Agreements",0))
set createnonmissingblk on;
"HSP_InputValue"(sn = sn + 1; "Region" = sn;)
set createnonmissingblk off;
ENDFIX
ENDFIX
ENDFIX
ENDFIX
ENDFIX
ENDFIX
ENDFIX
ENDFIX
ENDFIX
sorry, that was stupid question, overworked, didn't notice i fixed the same dimension twice via two different members, after i worked ths out everything became fine.
Again sorry for unnecessary disturbance.
Edited by: s0uLr1pPeR on 14.03.2012 8:44
Edited by: s0uLr1pPeR on 14.03.2012 9:04

one more suggestion i want to give it to you,
when you are writing a Base fix
you can also write in this way
FIX("plan1","Final","NormC_NA","Local",[RTP_Year], etc)
/* Your Calculation */
ENDFIX
Thanks,
Avneet

ID CS5: Numbered lists export to epub incorrectly

Hello,
I'm working with Indesign CS5 to convert a print textbook to epub format. I have quite a few numbered lists to make. For example:
1.
2.
3.
and outline-styled lists
I.
     A.
          1.
          2.
     B.
II.
     A.
     B.
I followed a very helpful video by Anne-Marie Concepcion about creating paragraph styles for each numbering "level." It has worked fine on the screen, but when I export to epub and preview the book on an iPad, some of the numbering messes up. Normal numbering (eg: simple 1, 2, 3 lists) work fine, but when I have outline-styled lists, it appears like this:
1.
     1.
          1.
          1.
     1.
How can I fix this? Any help would be appreciated!
Edit: I found a somewhat similar question online that ended up fixing the problem. If you are wondering how to fix it, go to the export epub dialogue window and select the option to convert the bullets and numbering to text.

Well,
Duplicate the file (save as) with another name.
Let's suppose a file with 300 pages. file1 "save as" to file2.
In the file1 go to page 151, and clean all the rest of the text and pages.
In the file2 go to page 150, and clean the text before the page 151 and delete the white pages.
Remember, delete pages don't clean the text, you have to delete the text too.
Create a book (File/New/Book...), give a name and add the file1 and file2, automatically, the pages are been renumerated.
Att.

Word 2007 - Using numbered list number in hyperlink

Hi,
I'm developing a document to be used in our office to detail processes. Each of the processes are numbered using a multi-level numbered list. In the appendix section I wish to include unit tests to complete for each process to prove that the functionality
works. So far no problem. In order to keep the document dynamic I wish to add a link to each of the unit tests to link back to the original process, again not a problem. But, I'd like the text of the hyperlink to reference the specific numbered list value
for the corresponding process, and have it update should the process be moved.
e.g.
2.3.4.1 This is a sample process description.
B.1.4.3 Unit test to ensure process is functional (2.3.4.1)
Can this be done or am I asking too much?
If it can't be done then are there any suggestions for achieving similar functionality using different features?
Thanks.

Ordinary cross-references should be enough.
(References tab->Captions group->Cross reference, select "Numbered item", select the paragraph you want to reference, then insert "Paragraph number"
Strictly speaking, they aren't hyperlinks, but REF fields. You should be able to ctrl-click to follow the link.
Because they are REF fields, you need to be aware of two things:
a. they don't update automatically. You have to select them and press F9 to keep them up to date.
b. each one refers to a bookmark that Word inserts to "cover" the relevant paragraph number. So you have to be a bit careful about how you create new paragraphs. Suppose you have a paragraph like this
2.3.4.1 abc
and another paragraph that references it.
If you click the the left of the "a" and press Enter, you may get two paragraphs like this
2.3.4.1
2.3.4.2 abc
You might hope that the reference will update to 2.3.4.2 but in fact it still points to the original 2.3.4.1 paragraph.
Peter Jamieson

Numbers-Auto Generating a numbered list in a column of cells

Having trouble creating an auto-generating numbered list in a single column. In text inspector I choose bullets>numbers>start at 1. The first cell is filled in with a "1", but when I hit return or down arrow the 1 disappears. If I go back and type a "1" again, two "1's" appear in the same cell. I'm trying to make a table with 250 rows. Not sure what I'm missing, as I'm new to iWork.

Numbers can fill a column or row of cells with a pattern. Type the first two numbers in the first two cells, select both cells, then click on the small circle at the lower right of the second cells & drag down to fill however many cells you want. You can see in this picture that it works for other patterns, not just consecutive numbers. I've also used it to fill across month names or dates.

Plug-in for bullets and numbered lists in Mail??

Does anyone know of any plug-ins for the Mail app to do bullets and numbered lists like Entourage??
The lack of this functionality really makes Mail kinda lame and unusable for me.
Thanks!

Paul,
the fact that Mail does not support bullit lists is not an oversight but was done on purpose. It may look good on your computer when you compose the message, but you have little influence in the way recipients see that message. It can get very messy, I can assure you.
If you want a perfect layout, compose in a wordprocessor and save as PDF, send that as an attachment.

Numbering list problem

Similar Messages

Maybe you are looking for