Numbering & Section issue

Hey all,
I had two different spreads which had "start section" checked under numbering and section dalogue. Both of them had a page 4 and so when I went to print it was impossible to print as error would continuously display. So to solve problem, with the first section, I specified Start Page Numbering at with "1000" to ensure that it would not conflict wiht the numbering of the other section. Hence, now I have spreads in my pages panel with numbering like 1000,1001,1002,1003 - even though they are really the 1,2,3,4 page respecively in document. However, I cannot name them 1,2,3,4 because I later name spreads 1,2,3,4. Rather than using this high number to represent the spread numbering, is there  a better solution?
Thanks for response.

When you attempt to print you can use "+" symbol this will use the actual page instead. So for example Print>Pages>+8 would print Page 8 of the document not folio 8.
Example:
Pages
|1
2|3
4|1
2|3
|4
Using the "+8" would print page 8, i.e., the 8th page.
But I think you're misunderstanding the Section numbers.
Typically within a publication you would not Section parts of the publication with 1,2,3,4 for both sections. This would really trip up someone when looking at a table of contents, table of cases, an index or page references within the publication.
Sections are designated with Roman Numerals, i,ii,iii,iv,v etc. for pages preceding the main focus of the publications.
For example I could have
(these in roman numerals)
Lead In Page (i)
Imprint Page (ii)
Foreword (iii)
Contents (iv - xx)
(these as 1,2,3,4)
Chapter 1 (1)
Chapter 2 (20)
chapter 3 (46)
etc.
Typically you would not Section a book with two Sections using "Numerals"
So the simple solution is to change the pages prior to the main Chapters to "Roman Numerals"
If you're using folios on these pages they will be represented in i,ii, iii, iv, v, vi etc.
But that's normal practice.
If you really need to number the Sections 1 - 4, then 1 - 4 again
You can use the + symbol print the actual page in the document and not the folio.
But it's odd to numbers sections this way.

Similar Messages

  • Change Start page numbering to Auto Page numbering in the Numbering & Section Options using script

    1.  I have many documents to add into a book. After adding the documents, all file page numbers should be continued from the previous file. Now I am doing manually for all files at all time. Numbering & Section Options => Start Page Numbering at: to Automatic Page Numbering.
    2. And also I need to add the Chapter number with the page number (Ex: 1/2, 1/3, 1/4 … , 2/2, 2/3, 2/4 …., 3/2, 3/3, 3/4 ….). Here also I am doing manually like.  Numbering & Section Options => Page Numbering => Section Prefix: 1 and Include Prefix When Numbering Pages. (The page number should start from 2).
    Note: In Every chapter opening there will be a file name called S… (Ex: Ch 1: S3391.indd, Ch 2: S3392.indd, Ch 3: S3393.indd). So after every S(S3391, S3392 …) file the next file page number should starts from 1/2, 1/3. 2/2, 2/2 ….
    Ex:
    Chapter 1          Pages
    S3391.indd     
    32457.indd       1/2  … 1/5
    32617.indd       1/6 ….. 1/9
    32217.indd       1/10 … 1/13
    Chapter 2
    S3392.indd
    42457.indd       2/2  … 2/3
    52617.indd       2/4 ….. 2/9
    33217.indd       2/10 … 2/13
    Could anyone give me an idea or script, please? At least for First one, could anyone suggest me ASAP.
    P.S: I have some more questions regarding this, I will post that after some time...
    Thanks in Advance,
    Thiru

    var openedDocs = app.documents;
    var chapterPrefix = prompt ("Enter the chapter prefix", "1/", "Prefix");
    for (var doc=0; doc<openedDocs.length; doc++){
        openedDocs[doc].sections[0].continueNumbering = true;
        openedDocs[doc].sections[0].sectionPrefix = chapterPrefix;
        openedDocs[doc].sections[0].includeSectionPrefix = true;
    alert("Done");
    Chapter 1, contains 10 files (Each file 6 pages)… (1/1, 1/2, … 1/60) – prefix 1
    Open all 10 files of one chapter and run it....
    and then for another 10 files....

  • Numbering & section weirdness

    I've recently adjusted the numbering section of a (InDesign CS4) 44 page doc and after saving it to a pdf, I noticed that PDF pages jumped from page 44 to 178. It looks like there are 178 pages in the doc rather than 44 according to the thumbnails and the total page count in the top menu in Acrobat. My actual InDesign layout pages are correct and show up correctly. As are the actual layout pages within the PDF file. It's only the page numbering in the PDF thumbnail or total number of pages in the Acrobat top menu. When you go to print it says your printing 1-178 pp. Master pages are set up properly and work fine in the layout. Any ideas on why this is happening or any fixes. Thanks Scott

    All the page numbers in the layout show up correctly. It's a 44 page doc with cover, inside front and back cover, and back cover, plus 40 text pages which is where I started the page sequence (actual page 3 in layout). The Acrobat file shows you have 142 pages in the document when there are only 44. They print out fine by the way (correct page numbering). By the way when I wanted to print the whole thing I had to print 1-142 not 1-44 (it wouldn't allow 1-44).

  • Pages, Numbers, Keynote issue with WebDAV

    I am in need of your assistance as the new version of Keynote appears to be causing issues, and I am not sure where to go or what to do to report this.
    Here is the situation.
    We have a Sharepoint server running WebDAV services.  Our students use WebDAV capable applications on their iPads such as Pages, Numbers, Keynote, WebDAV NAV +, etc.   They create files using these apps on their iPads and then save them to their "WebDAV" folder on the SharePoint server.  This is necessary so that students may access their files via the iPad in our LMS and turn in assignments via a digital dropbox.  This has worked fine in the past until the update of Pages, Numbers, and Keynote.  In the past these apps on the iPad have always placed a single file on the server to which the students could go in and retrieve the file or send it to a digital dropbox in our LMS through a WebDAV connection between the LMS and the SharePoint server.
    With the update of these apps on the iPad to the newest version, Pages, Numbers, and Keynote now place a folder on the SharePoint server of which it contains the following items:  folder titled "Data", folder titled "Metadata", icon titled index.zip, icon titled preview-micro.jpg, icon titled preview-web.jpg, icon titled preview.jpg.
    The issue is that now with this being a folder, students are no longer able to retrieve the file nor are they able to go into the LMS and send the file to a digital dropbox as it is now a folder and not a packaged file.
    This is a serious setback to us as it renders Pages, Numbers, and Keynote useless since they can not use their iPads to retrieve or submit their assignments to a dropbox in an LMS or bring it back to the apps on the iPad. 
    As I said earlier, this worked perfectly fine prior to the new version of Pages, Keynote, and Numbers.
    I believe this to be a Pages, Numbers, Keynote issue as when I send the file from Keynote to the WebDAV folder as a PPT, everything works fine.  Kind of hard to get the staff to use Keynote when all they see is the "PowerPoint" verson works with no issues.  Also, this would be a poor work around for something that use to work in the past.
    Anyone else experience this or have suggestions?
    Thank you in advance.

    I'm not sure if this is exactly what your original post is about but I saw the comments under it talking about
    getting the same notification over and over again that dropbox files were updated, like it's in a loop and won't stop. I also am seeing the properties.plist, index.zip and preview-micro.jpg as the updated file names when I click on my little dropbox icon on the top of my desktop. I am on a Macbook Air OS X 10.9 (Maverick). I've been using dropbox for a while and this seems to have started after I upgraded to Maverick.
    I wrote to Dropbox and here is the process they had me follow to correct this problem, and it worked perfectly, so I thought I'd share (**the only step that I didn't do is step 4 because I couldn't find the dropboxhelpertools folder in my library):
    Thank you for contacting Dropbox Support!
    There appears to be a problem with the Dropbox software currently installed on your computer. I'm going to have you do a full reinstall and resync to attempt to fix the problem.First, make sure you save and quit ALL programs that access files in the Dropbox folder.
    Here are the steps:
    1. Download the newest version:
    - http://www.dropbox.com/install/
    2. Stop the Dropbox desktop application (if needed)
    - Click on the Dropbox icon.
    - Choose Quit/Stop/Exit
    3. Delete Dropbox meta-data folder:
    - To delete this folder open a Terminal (Located at /Applications/Utilities/Terminal for Mac OS)
    - Copy and paste the following lines into the Terminal and press RETURN:
    mv ~/.dropbox ~/.Trash/dropbox.old
    - This will move the folder to the Trash and make it visible.
    4. Delete the Dropbox Contextual Menu Item Plugin
    - Open the Finder and select Go to folder... from the Go menu (or press Shift-Command-G)
    - A dialog box should appear. Now copy and paste the following line into the box and press the return key:
    /Library/
    - Finally drag the DropboxHelperTools folder to the Trash and enter your Administrator password if prompted to complete this action.
    5. Reinstall the Dropbox desktop application
    - Open the Dropbox .dmg file and double click the Dropbox icon.
    - Dropbox should appear in your menu bar.
    - Relink your account.

  • Numbers printing issue

    I am making my class schedule for the college semester, and when I try to print it, it splits the print job into four pages. Now, all my data fits onto one page. The second page prints out a duplicate copy of column one. page three and four print duplicate copies of row 1.
    I have heard blank spaces can cause this problem. That is ridiculous. In a class schedule, there will be blank spaces. Is there a way around this?
    Note: All my data does fit onto one sheet in landscape mode. That is not the issue.

    what they mean by blank spaces is extra rows and columns in your table. In numbers we don't have extra rows like in excel. The last number you should see should line up with the last line of data in your table. Same thing with columns.
    Make sure you switch to print view mode and use the slider to scale your print to fit the page.
    See if that works for ya'
    Jason

  • Numbers sync issue

    Since upgrading to IOS7, I keep having problems syncing one of my ipads and one of my iphones with applicaiton "numbers".  It syncs it each time I do a sync.  And nothing has changed.  Any ideas?  Delete it and start over?

    kozmikoda wrote:
    Thank you, but previous version of Numbers didn't has this issue.
    I opened, viewed and closed. There was not any syncing when I didn't change anything in the document.
    I think this is a bug developers don't know.
    I suppose it is possible, but as far as I know if you are using iCloud, it has always behaved this way. There has never been a strictly manual sync.
    You can always turn off iCloud for Numbers adn turn it back on when you wish to sync if it is that much of an issue for you.

  • Numbers - duration issue

    I have an Ipad2.  I have updated both the OS and software for numbers to  the latest versions.  Many of the issues with numbers have been fixed  finally since the OS upgrade.  However now my forms will not let me  input duration times.  It keeps changing it to time of day.  I have  verified that the orginal spreadsheet has the correct formating and it  will let me put it in those cells correctly but when it moves over to  the forms it changes to time.  Anyone else having this issue or have a  fix for it?

    Hi,
    We are all users like yourself. Maybe Apple knows.
    quinn

  • Numbers - font issue

    I have updated both the OS and numbers programs on my Ipad2 but now  everytime I open up a sheet it tells me that one of the fonts is no  longer supported.  I have reformated the whole spreadsheet to a  different font and it still does it.  Any ideas how to fix this or work  around it so it does not open with that notice everytime?

    We are having a similar problem with projects converted from X5 to RH8, for numbered and bulleted lists.  The text font is 10 pt, and the numbers, letters, and bullets are 12 pt.
    Where and how do we tweak the <ol> or <ul> tags?   Right now, a numbered list in our HTML is:  <ol type="1">
    How can I define type=1 so that the numbers are 10 pt?
    I did change the < li >  tag class. After the conversion, with the removal of a lot of the "kadov"s, the list lines now have tags of  <li class="p">, and I don't think there was a LI.P class in our CSS.  When I manually changed the HTML to be <li class="kadov-p"> - since there was an LI.kadov-P defined in the CSS, the numbers appeared correctly.  SO, I copied the LI.kadov-P entry in the CSS, with the same attributes, and changed the copied entry to LI.P.  However, that change to the CSS did not seem to work.
    There's also the following tag right after the <ol type="1> tag:   <li style="list-style: none; display: inline;">   Not sure, but I don't remember seeing that before.
    I realize there are a bunch of threads around this issue.  And I've read a lot of them.  So I apologize if I've missed some crucial information that would apply to our problem.
    I'm hoping for a global resolution here - such as changing the CSS.  I'm new to RH8, but have been using previous versions of RoboHelp for over 12 years (I think).  I would appreciate expert advice.  BTW - Peter, thanks so much for your website and your help there - I've been using it a lot!!
    Susan

  • Numbers saving issue

    This message pops up about every 10 minutes. Can you tell me how to correct the issue?
    I'm running a MacBook Pro v 10.9.2 and Numbers v 3.2.
    The Numbers spreadsheet is on my local hard drive and no one else is using it.

    This Numbers document has always been in my Documents folder. But I copied it to my Desktop, then moved it back and I have the same "Saveing Issue" as shown above. It is really hard to believe that anyone using Numbers does not have this problem.

  • Numbers Update Issue

    Numbers update 3.5 has not yet been updated with the iPad version which is still 2.5. When will this issue be resolved? It is causing issues with syncing my iPad with iCloud Drive

    Hi,
    We are all users like yourself. Maybe Apple knows.
    quinn

  • Running a Media Query from MultiScreen Preview Head Section Issue

    Hello,
    I'm working on a dynamic web application from localhost that uses php/mysql. Aside from the dynamically-relate files bug error message (it appears even when the files are being included properly), the site is working fine in live view and navigates fine when I ctrl/command+click.
    When I click on "Multiscreen Preview" the site shows and navigates in Tablet, Phone, Desktop without issues - but all look the same when the site should look differently in Android and IOS browsers (we've tested on the hardware). However, when I click "Media Queries..." to run some queries, I recieve a dialogue that says "Your current document does not contain a head section. A head section is required to run this command." I cannot access Media Queries to further simulate an android or iOS browser environment (as the site is designed to look differently but looks the same in all multiscreen previews in DW).
    Thanks
    Jesse

    Thanks for your reply! I did set the resolution value, but, instead of the 'or' clause, I used two different links for the retina vs. mobile style sheets. That worked perfectly on several (actual, not simulated) devices on a site I had done for a previous client. However, I will try it using the 'or' clause. In fact, I copied the media queries for this new site from that earlier site. Multiscreen preview did not accurately reflect the iPhone Retina option from the drop-down menu for either site.
    Multiscreen for Smart Phone works most of the time, and I find that to be very helpful. However, if DW's multi-screen does not simulate the retina display, I wonder why Adobe included "iPhone Retina" in the Multiscreen drop-down menu at all. (I don't mean to criticize Adobe for it, but it does seem an odd choice to include a feature in a menu when the feature doesn't really work.)
    Anyway, thanks very much for your helpful reply.

  • Document Numbering Action Issues

    Been having nothing but problems with the Document Numbering Action provided by Adobe and unfortunately have a big need for it.
    Currently, whenever I deselect "Include Page #" forces the the Doc# to become "Exhibit/Document NaN" and won't number the documents at all. Just showing Document NaN or Document undefined.
    You can try and manually change it, but it will just over ride you.
    Also, how can I change the text propertoes? I don't want Helvetica 10px Black which is default, and while I can change the background, I would like to be able to at least adjust the text size and color.
    Tried on 3 computers, done a full Acrobat and Action reinstall and all have the same problem.

    Well, I've found that if I simply allow the first document to have a page number, it will allow me to remove it for all the subsequent pages without issue. Then I just go back and edit it later.
    Still trying to figure out a way to change the text colour and size however.
    If it helps, I am combing all the files. Is there a way to batch change colours and size of comments?

  • Updation of TDS return Acknowledgement numbers Section code wise

    Hi
    I want to update the Acknowledgement numbers for TDS return filed.
    We have many business place and section codes. But in Table J_1IEWT_ACKN_N there is no field for business place and section code.
    Help me to do this on priority.
    Regards
    Ajay

    Hi ,
    Have a Look , TDS Certificate
    Regards ,
    Swapnil vaidya

  • Disabling Skype Numbers- Major Issue

    I have 2 skype numbers and for one of the two, I have been put on a spam list and am now getting about 100 (seriously) calls a day from a multitude of numbers. Now, I need to keep my other number for my job so when I finally find the skype live chat support (which Skype has done very well at hiding), they tell me there is NO way for me to disable my skype number except for waiting until my subscription runs out (in 2 months). Also since there is no way to tell which number someone is calling you on (i.e.skype number #1 or skype number #2), now I have to answer ALL of the calls so I can filter the 3-4 important business calls a day from the 75-150 spam calls I am getting.
    Am I missing any ways to disable my number or is skype really this inferior of a service?
    This is the last straw for me, Skype is not sitting in good standings with me anymore, not after this fiasco. 

    Ditto - I agree this is a major issue. Likewise I used my Skype number on contact details for a trade directory and since the New Year we are getting about 30 calls a day from salesmen. I too have purchased a new number, but desperately want to disable the old number. I dont want any kind of refund for the unused portion of my subscription. I have basically had to keep signed out of Skype during working hours in order not to be disturbed!  Please help!

  • Strange Numbers Sync Issue to Icloud

    It's strange that even if i don't make any changes to a Numbers document, it tries to sync itself to icloud every time I open > view > close a document.
    Anyone have this issue and help me?
    Thank you.

    kozmikoda wrote:
    Thank you, but previous version of Numbers didn't has this issue.
    I opened, viewed and closed. There was not any syncing when I didn't change anything in the document.
    I think this is a bug developers don't know.
    I suppose it is possible, but as far as I know if you are using iCloud, it has always behaved this way. There has never been a strictly manual sync.
    You can always turn off iCloud for Numbers adn turn it back on when you wish to sync if it is that much of an issue for you.

Maybe you are looking for

  • Flat file

    HI Gurus , I am loading the data through csv file Flat file putting 0doc_number and 0s_ord_item in key fields of DSO and rest fileds like sales org , sales group upto 8 eights fields in data fileds when i am loading the data and clicking on the propo

  • App store and apps problem when migrated

    I am going to ask this here because Apple support has not been able to fix this. Old computer = iMac core 2 duo 2.4GHz 10.6.7 OK so I just bought a new iMac quad core i7 2.93GHz (2010 model on closeout) and from the start I selected to migrate from a

  • ORA-0092 error when trying to create an external table

    For some reason, I always received the following error whenever I attempt to create an External table. ORA-0092:missing or invalid option This is the code that I am using in SQL Plus: SQL> create table products ( 2 product_no number, 3 description va

  • Problem User Languange

    Hi experts,  i have the following situation for BPC NW 7.0003: I have a ADMIN user that belongs to a domain X and when i create a dimension with this user, caracteristic in BW is displayed in ES (spanish) language. On the other hand, when i create a

  • CS5 after update to bld 4964: dragging ap divs doesn't work

    Now noticing that with AP divs, I can't drag them into position in Design view. What happens is the div jerks and jumps outside of the relative container. I have to go to code view to properly put the div in place. Not a huge thing but you know how a