Numbers fails to load from any template or document

Below is the code from Console when I tried to open the 'notes' template in Numbers '09. The software is up to date, Pages and Keynote operate normally. I have checked Fontbook and eliminated one duplicate font.
Please help!
4/3/13 8:44:19.113 AM Numbers: Error loading /Library/QuickTime/XviD_Codec-r58 (ppc).component/Contents/MacOS/XviD_Codec: dlopen(/Library/QuickTime/XviD_Codec-r58 (ppc).component/Contents/MacOS/XviD_Codec, 262): no suitable image found. Did find:
/Library/QuickTime/XviD_Codec-r58 (ppc).component/Contents/MacOS/XviD_Codec: unknown file type, first eight bytes: 0x58 0x89 0x0A 0xDC 0x9D 0xFB 0xE6 0x66
4/3/13 8:44:21.554 AM Numbers: *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil
4/3/13 8:44:21.554 AM Numbers: (null)

Hi,
I was just having the exact same problem.
I had a look at the code mentioned in the log (/usr/share/asweome/lib/wibox/init.lua:107), which seems to be the wibox constructor. I then tried adding a height parameter to my rc.lua and that fixed it.
So specifically, in my rc.lua (which is the default one installed in /etx/xdg/awesome/) I changed this line:
mywibox[s] = awful.wibox({ position = "top", screen = s })
to this:
mywibox[s] = awful.wibox({ height = 24, position = "top", screen = s })
Now awesome does load correctly (although something seems wrong with the font... I'll try to figure that out next).
What I still don't understand is why the wibox constructor in my new arch installation needs a 'height' parameter, while my other arch installation, which also uses awesome, doesn't. They're both completely up to date.
Anyway, I hope that fixes it for you as well.
Cheers,
Ewoud

Similar Messages

Aperture 3.2.4 macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks

“Hi Kirby, thanks a lot for your answer.
I got one answer, from DMoore, saying:
“Try Safe boot and then restart with only Aperture open. Still doent work write back with more details like Ram, HD capacity/free space. Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
Safe boot http://support.apple.com/kb/HT1564
Starting up into Safe Mode does several things:
1 It forces a directory check of the startup volume.
2 It loads only required kernel extensions (some of the items in /System/Library/Extensions).
3 In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
4 It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
5 It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
6 It disables all startup items and login items (Mac OS X v10.4 or later).
7 Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
But I understand your questions, so I’ll try to answer them;
"loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
I can see images in the Browser, so it only happens in the Viewer(s).
I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
Did Aperture work before?
Yes it worked ok for a while, but I only purchased it on 24th May.
If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
But I have not changed the default Preview settings in Aperture Preferences.
My macbookpro details:
2.7 Ghz Intel Core i7
Memory: 8 Gb 1333 MHz DDR3
Hard Drive capacity 499.25 GB
Available 387.36 GB
I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
I hope this helps you to understand more.
Thank you for trying to help me.
Tony

AR can't be added-Error "Failed to load from XML resource"

Hi Everyone,
I need help with this error. When entering an item and then tabbing in an AR document, this code appears.
"Failed to load from XML resouce".
Thanks,\
Debbie

Hello experts,
I am facing this issue in SBO 9.0 PL 08.
Using SBOdemoUS, clic 'Duplicate' an existing Sales Order, then select a Business Partner, and hit 'yes' to the question in order to refresh rows with new BP info. You will get red bar error 'Failed to load from XML resource - (UI_API 7004) [Message 66000-6]' and it wipes out all the copied rows info. Does not happen with BPs that don't have default Ship To info.
Your advise please.
Thanks

RAW files failing to load from LR5 to PS6

Hi, normally my Lightroom happily opens the files in Photoshop either straight or as smart objects but, for some reason now when I try all seems well and Photoshop automatically opens but the actual files fail to load. This is frustrating to the MAX as I am on a big edit at the moment. Any help gratefully received,
LR is version 5.3 and PS is version 13.0.6 x64 The files are from Sony A7 and A7R. My machine is a 27" Imac with rammed to the max. The same catalog loads fine on my 15" Retina MAcBookPro

Just a bump-

Ticker not loading from any column

is it possible to have a ticker not loading any data (from any column) ?
only scroll some text on the dashboard page.
thank you very much!

Hello,
In criteria, you have not selected any columns, seems
You should select atleast one column in criteria...
and in Row Format of ticker view, write the text that you desired... as naresh said..
If you have not written anything in Row Format, by default the column values will be displayed in ticker view

Why isn't yahoo mail sign in page not loading from any browsers on desktop?

I am experiencing this problem from yesterday where the page stops loading when I click on yahoo mail. It stops right at the sign in page with a blank page, thus I am unable to access yahoo mail. I have tried different browsers and even different users, after clearing cache, cookies and internet history. I did notice I am able to access yahoo mail without any trouble from a different pc altogether and from a mobile device. I assumed the problem would be fixed overnight but it's still not working. I have never experienced this problem before. Please help. Thank you.

Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache
Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
and
* Remove Cookies
'''''Warning ! ! '' This will log you out of all sites you're logged in to.'''
Press the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Privacy.'''
Under '''History''', select Firefox will '''Use Custom Settings'''.
There is a button on the right side called '''Show Cookies'''.
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Press the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

PDFs fail to load from backup

I upgraded my iOS recently. In the process, I took a backup of my iPad 2. In addition to some purchased books, my iBooks had a lot of other books that I downloaded from the net, a lot of them marked with some important info I can ill afford to lose.
When I restored from the backup, only the purchased books were restored, and the rest lost. How do they restore the other books, and the associated notes/highlights/comments ?
Also, I was unable to restore the images from the backup.
Please, please help me.

Thanks Meg :)
I called the service centre up, and they asked me to do the same too. One pointer though for someone facing the same problem - if you lay your hands on the link from which you downloaded the original PDF/ePub, any notes/comments/highlights in the book will be retained

Kindel fails at loading from App

I have tried to use the Kindel app on my Imac with OS Mountain Lion 10.8 but get the following screen:
App External ID: 4403181
Code Type:       X86 (Native)
Parent Process: launchd [135]
User ID:         501
Date/Time:       2012-08-13 22:08:59.243 +0100
OS Version:      Mac OS X 10.8 (12A269)
Report Version: 10
Interval Since Last Report:          150503 sec
Crashes Since Last Report:           3
Per-App Interval Since Last Report: 36 sec
Per-App Crashes Since Last Report:   3
Anonymous UUID:                      F78112CC-0CEF-48BA-B846-576A1A1D7E99
Crashed Thread: 6
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
abort() called
There after lots of code after this. I have used Disk Utility to use the Fiorst Aid app and re-booted thye system, also have trashed the app then re installed the Kindel App. No joy so far, can anybody help me.
thanks
Dave P

Solution is:
1) Close App Store.
2) Open terminal and run: open $TMPDIR../C/
3) Delete folder: "com.apple.appstore."
4) If FCP file exists in the applications folder - delete that too.
5) Launch App Store
6) Restart downloads.
This worked for me and others as well.

WHY DOES THE PE EDITOR KEEP FAILING TO LOAD

I have a brand new problem with Photoshop Elements 8, which I've been using in Windows for several years.
Suddenly the PE editor refuses to load--either from "Fix" in the album space or from "Edit" in the Workspace. It starts to load (with the green dots moving across the bar) and then kicks out. Even after I signed in successfully to PE, the editor still fails to load. Any suggestions?

One easy fix for Adobe programs is to Reset Preferences = Press/HOLD Ctrl+Alt+Shift while starting program
IF your problem is a corrupted preferences file, this is the fix

Core DLL failed to load

Suddenly I get the message "CORE DLL" failed to load whenever I try to read an Adobe file. I've removed the program 3 times and downloaded a new download from the Adobe website, but still I get the same result:"CORE DLL" failed to load. Any suggestions?
Thanks

Please See the solution on below link : http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

Boot Disk Failed to load even though I've delted Windows Partition?!

Hi All,
I had a few problems installing Windows (mainly not being able to eject the CD during installation...) and decided to wait a while until I purchase Vista. I've deleted the partition through Disk Utility, and it now shows that it's not there.
However, when I start up my Mac, I'm faced with a screen saying "Boot Disk failed to load, press any key to restart."
I can get into my Mac by holding down the Alt Key, but don't really wanna do that every time I turn it on!
Does anyone have any suggestions?
Happy New Year!
Simon.

Check System Preferences > Startup Disk and make sure it is set to Mac OS. See http://docs.info.apple.com/article.html?path=Mac/10.5/en/8240.html

Can OLAP cube load from remote database?

Sorry, been forever since I worked with Express / Oracle OLAP. If I want to build a cube in one database, is AWM able to load data from another database? Or do I have to have to build the cube on the same database where the source is?
Thanks!
Scott

You can load from any local table or view. So the simplest approach is to define a view in your AWM database that selects from the table in the second database. You then map your cube to the local view.

Template for Document Numbering

Hi experts,
Can I import document numbering series through DTW? Is there any templates for Document Numbering?
Thanks & Regards
Jaics

Hi,
DTW Error- Only with one particular document number series -JE
Thanks
Mansoor

Data load failed while loading data from one DSO to another DSO..

Hi,
On SID generation data load failed while loading data from Source DSO to Target DSO.
Following are the error which is occuuring--
Value "External Ref # 2421-0625511EXP " (HEX 450078007400650072006E0061006C0020005200650066
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0BBP
So, i'm not getting WHY in one DSO i.e Source it got successful but in another DSO i.e. Target its got failed??
While analyzing all i check that SIDs Generation upon Activation is ckecked in source DSO but not in Target DSO..so it is reason its got failed??
Please explain..
Thanks,
Sneha

Hi,
I hope your data flow has been designed in such a way where the 1st DSO as a staging Device and all transformation rules and routine are maintained in between 1st to 2nd dso and sid generation upon activation maintained in 2nd DSO. By doing so you will be getting your data 1st DSO same as your source system data since you are not doing any transformation rules and routine etc.. which helps to avoid data load failure.
Please analyze the following
Have you loaded masterdata before transaction data ... if no please do it first
go to the property of first dso and check whether there maintained sid generation up on activation (it may not be maintained I guess)
Goto the property of 2nd Dso and check whether there maintained sid generation up on activation (It may be maintained I hope)
this may be the reason.
Also check whether there is any special char involvement in your transaction data (even lower case letter)
Regards
BVR

"Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR"

Hi Apple Ppl of the Wrld: I need help I been working on installing windows 8 on my Mac.
Spec of equipment:
Mac Book Pro Mid 2012
Bootcamp Version: Version 5.0.4 (473)
Bootable USB Flash Drive: Type Scan disk 4 GB windows 8 pro iso image but without the driver and the 2nd Scan disk USB flash drive with 32 GB with the Bootcamp Drivers downloaded and saved to this drive.
Please Note: I also have the original back up installation disc for Microsoft 8 Prof 64 from Microsoft where I purchased it from.
1st Bootcamp is not recognizing the Original Microsoft 8 Pro backup disk from microsoft itself.
Solution: I created the New Image from the Original Microsoft installed disc in my desk top and changed the extension to .ISO then burned the ISO image into the newly purchased DVD+R. Then I ran Bootcamp Once again and it get the following error message "The installer disc could not be found -- Insert your Windows installer disc and wait a few seconds for the disc to be recognized. Solution
2: Created a bootable usb drive with bootcamp assistant successfully with bootcamp. Yes I close, ejected or un-mounted any image that was open or had been previously used then i restarted the Mac. Next, I start the bootcamp assistant tool once again then i get the same insert your windows installer disc message.
3: Then I try to resolve the installer disc not found issue: this are the steps i took: a). Lauch disc utilities
    1. Selected the top most drive 750 GB Macintosh HDD
    2. On the right you’ll see 5 tab buttons: First Aid | Erase | Partition | RAID | Restore.
    3. Choose Partition. Then I clicked + to add another partition size of the partition was 222 GB
    4. Change the Name of the Partition to BOOTCAMP
    5. Change the Format to MS-DOS (FAT)
    6. Click Apply to save the changes and then reboot your Mac and we’ll begin Windows installation.
    7. During reboot, press and hold the alt/Option key and you’ll be presented with drives to boot from.
    8. Use the arrow keys and return button to select the Windows yellow USB key drive containing your Windows 8 installation files.
    9. This will begin the Windows install. --> then i get the following message: "Booting from Boot Camp Assistant created USB Drive...Failed to load BOOTMGR".
4: Take the Mac to best buy and let them resolve the issue and charge me like a million dollars for it :'( since i have no other idea who to get this bootcamp working at all. This has been a terribly lengthy issue and it is not as simple as it is claimed to be since i started with the Original Windows Disc Purchased from Microsoft and I have the Optical disc drive which it should be simpler from what I understand.
Please can you help It would be of great help.
<Email Edited by Host>

from what i understand you are trying to install win 8 pro from a "backup disk" the one that you purchased from microsoft.
this will not work, it is not an installer disk.
you need to start the process again. erase the partition you made on your hdd. in disc utility click the minus button after selecting the bootcamp partition, then manually drag the divider down fully then apply.
next, erase your usb then format it.
download win 8 iso from here;
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
it is perfectly legal to use your purchased product key in this install.
in bootcamp select the iso image you just downloaded, select your preferred partition size, check all 3 options.
you have the support software on another usb but you wont need it so it can be discarded. the install will work far better with the iso and support on the same drive.

Numbers fails to load from any template or document

Similar Messages

Maybe you are looking for