Numbers - Rows
Hi everybody,
New to Numbers so please help!
I'm using numbers as a simple database - names, emails, that sort of thing - adding people as I go along. Everything was going well when suddenly it stopped letting add another row. I copied the whole thing onto a new sheet and managed to add a couple more rows and then stopped again. I've found the tag thingy at the end of the far right-hand column but it won't let me drag to increase the length of the table though it will let me add more columns, just not rows. What am I missing?
thanks
Hi, I do not use Numbers but if it's like Pages->go into the BLUE i icon-> it allows rows to be added as well as Lines etc...L
Similar Messages
-
How to make numbered rows in Numbers
How do I make numbered rows in Numbers?
Hi Carol,
It depends on whether you want the numbers to move with the rows if and when you sort, or if you always want the rows numbered top to bottom.
There's a function that returns the row number: ROW(). Placing that in a cell always displays the number of the row. If you want to number once and then let the numnbers follow the data around, you can Fill with a sequence by typing "1" in the first row and "2" in the second row. Then select both cells and drag the Fill handle down the table to extend the series. The fill handle is the little open circle in the lower right corner of the selection.
Jerry -
Getting every odd-numbered row from result set
select *
from mytable
where MOD(rownum,2) = 1;
Why does this not give me every odd-numbered row from result set? It returns just 1 row....
Thank uWhen you say MOD(ROWNUM,2)=1 it will list only the first row with rowid which is devisible by 2 and gives a reminder 1.
Just tweak your query with a GROUP BY:
SQL> select rownum from your_table group by rownum having mod(rownum,2) =1;
ROWNUM
1
3
5
7
9
11
13
15
17
19
21
ROWNUM
23
25
27
29
31
33
35
37
39
41
43
etc...
[pre]
Jithendra -
Retrieving Odd numbered rows from a table.
In one recent interview I have been asked to write a SQL query to retreive Odd numbered rows from any table. At first I am confused on how to say whther a perticular row is odd or even. If it is based on rownum then rownum is not dynamic and every time the rownum changes for a perticular row. I finally used rowid for this puprpose, as you all of you know rowid is alphanumeric its not worked.
Can you please posta query to retrive odd numbered rows if its possible.Mallik wrote:
In one recent interview I have been asked to write a SQL query to retreive Odd numbered rows from any table. At first I am confused on how to say whther a perticular row is odd or even. If it is based on rownum then rownum is not dynamic and every time the rownum changes for a perticular row. I finally used rowid for this puprpose, as you all of you know rowid is alphanumeric its not worked.
Can you please posta query to retrive odd numbered rows if its possible.As you say, if there's nothing in the data itself to offer a distinction as to what is "odd" and "even" then the closest thing is the rownum.
SQL> select * from (select rownum rn, emp.* from emp) where mod(rn,2) = 1;
RN EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
1 7369 SMITH CLERK 7902 17-DEC-1980 00:00:00 800 20
3 7521 WARD SALESMAN 7698 22-FEB-1981 00:00:00 1250 500 30
5 7654 MARTIN SALESMAN 7698 28-SEP-1981 00:00:00 1250 1400 30
7 7782 CLARK MANAGER 7839 09-JUN-1981 00:00:00 2450 10
9 7839 KING PRESIDENT 17-NOV-1981 00:00:00 5000 10
11 7876 ADAMS CLERK 7788 23-MAY-1987 00:00:00 1100 20
13 7902 FORD ANALYST 7566 03-DEC-1981 00:00:00 3000 20
7 rows selected.Anything else is making an assumption as to what is "odd" and "even". If it were me, the answer would be to do the above and also explain that, without any definition of what constitutes "odd" and "even" this is the closest possible, but not an accurate science as there is no guarantee as to the order of the records. -
JTable getColumnName not working with numbered rows
you know when you read through the same code for a day and can't find the problem but someone who has never seen it before can find the problem in a second? i've got that going on right now.
I saw a thread, http://forum.java.sun.com/thread.jspa?forumID=57&threadID=639189 , where rows numbers are neatly added to a JTable by camickr, after I implemented this I can't get my data or ColumnHeaders to line up with the corrent columns. I have three columns, { Integer, Integer, JComboBox } it's kind of an old post but I was just wondering if any one else had run into the problem.
Also when I insert a new row { Integer, Integer, "Combo Option" } it is inserted into the table as { Integer, "Combo Option", Integer }, this isn't a real high priority but any help would be appreciated, thanks.I tried to shorten this up as much as possible, sorry but it is still kind of big:
//Main class
import java.awt.*;
import java.awt.event.*;
public class TableProblem extends javax.swing.JFrame
BoreDataJTable table;
javax.swing.JScrollPane jsp;
public TableProblem()
BoreDataDefaultTableModel model = new BoreDataDefaultTableModel( 0, 3 );
table = new BoreDataJTable( model );
table.getTableHeader().setReorderingAllowed( false );
jsp = new javax.swing.JScrollPane( table );
jsp.setViewportView( table );
this.setContentPane( jsp );
public static void main(String args[])
System.out.println("Starting App");
TableProblem f = new TableProblem();
f.setSize(300,100);
f.show();
//JTable class
import javax.swing.*;
import javax.swing.table.*;
import java.awt.Component;
public class BoreDataJTable extends JTable
public BoreDataJTable( TableModel tm )
super( tm );
setAutoCreateColumnsFromModel( false );
setAutoscrolls( false );
addColumn( new TableColumn() );
getColumnModel().getColumn(0).setCellRenderer( this.getTableHeader().getDefaultRenderer() );
getColumnModel().getColumn(0).setPreferredWidth( 25 );
getColumnModel().getColumn(0).setCellEditor( null );
getColumnModel().getColumn(0).setResizable( false );
getColumnModel().getColumn(1).sizeWidthToFit();
getColumnModel().getColumn(2).sizeWidthToFit();
setPreferredScrollableViewportSize( getPreferredSize() );
initGroundColumn( this.getColumnModel().getColumn(3) );
public boolean isCellEditable(int row, int column)
if( column < 3 )
return false;
else
return true;
public Object getValueAt( int row, int col )
if( col == 0)
return new Integer( row + 1 );
else
DefaultTableModel model = ( ( DefaultTableModel )(
this.getModel() ) );
return model.getValueAt( row, col - 1 );
public void initGroundColumn( TableColumn groundColumn )
JComboBox comboBox = new JComboBox();
comboBox.addItem( "Select" );
comboBox.addItem( "Top Soil" );
comboBox.addItem( "Clay" );
comboBox.addItem( "Sand" );
comboBox.addItem( "Gravel" );
comboBox.addItem( "Pit Run" );
comboBox.addItem( "Sand Stone" );
comboBox.addItem( "Bed Rock" );
groundColumn.setCellEditor(new DefaultCellEditor(comboBox));
DefaultTableCellRenderer renderer = new DefaultTableCellRenderer();
renderer.setToolTipText("Select Ground Type");
groundColumn.setCellRenderer(renderer);
//DefaultTableModel class
import javax.swing.table.*;
import javax.swing.*;
public class BoreDataDefaultTableModel extends DefaultTableModel
private final Object[] emptyRow = { new Integer(0), new Integer(0), "Select" };
private final String[] colNames = { null, "Depth (cm)", "Angel (%)", "Ground" };
int cols;
int rows;
public BoreDataDefaultTableModel( int rows, int cols )
super( rows, cols );
this.rows = rows;
this.cols = cols;
addRow( emptyRow );
public String getColumnName( int col )
return colNames[col];
}The problem is that when the JComboBox is changed, it changes the value in the "Depth" to the the JComboBox's value, also it doesn't correctly display the ColumnHeader for the JComboBox's column -
Create auto-numbered rows?
I'd like to auto-number the first number of a new row when creating a new entry in a form. In other words, when I create a new entry in my form, in the corresponding table the first column is numbered sequentially 1, 2, etc.
I can't seem to figure out how to do this. Any help is appreciated.I have been trying to do this myself. I would think that if you place a formula like =row()-1 and then added a row beneath that it should copy that formula to your new row. I think the desktop version does this, but not the ipad version, I might have missed a setting somewhere, but cannot find it.
Jason -
How can I add a whole paragraph of text to an IPad Numbers row?
I can add the text just fine, and the text wraps to the next line as I type it, but when I'm done only one row of text appears. If I change the row height, it creates a nice high row, but again only the first line appears at the bottom of the row.
Under the Format button ( the paintbrush) at the top of the screen turn on "Wrap text in cell".
-
How to select x numbered row from two tables
Hi,
I have one performance problem...
Here is sample scenario...
TableA
A1 A2 A3
a1 a12 a13
a2 a22 a23
a3 a32 a33
TableB
B1 B2 B3
b1 b12 b13
b2 b22 b23
I want result like
A1 B1 A2 B2
a1 b1 a12 b12
a2 b2 a22 b22
I have written it like
select
A1,
B1,
A2,
B2
from
(select A1, A2, rownum rnA from TableA) a,
(select B1, B2, rownum rnB from TableB) b
where rnA = rnB
but suppose TableA has 2500000 rows and
TableB has 500 rows then for 500 rows I have to
wait for all 2500000 rows scanning.
Is there any smart solution..?
I have created indexes for on columns A1, (A1,A2,A3), B1, (B1,B2,B3).
Curious:)
Rushang Kansara
Message was edited by:
Rushang KansaraHere is explain plan
SELECT STATEMENT, GOAL = FIRST_ROWS Cost=5 Cardinality=67 Bytes=3618
HASH JOIN Cost=5 Cardinality=67 Bytes=3618
VIEW Object owner=SFMFG Cost=2 Cardinality=82 Bytes=2214
COUNT
TABLE ACCESS FULL Object owner=SFMFG Object name=TABLEA Cost=2 Cardinality=82 Bytes=1148
VIEW Object owner=SFMFG Cost=2 Cardinality=82 Bytes=2214
COUNT
TABLE ACCESS FULL Object owner=SFMFG Object name=TABLEB Cost=2 Cardinality=82 Bytes=1148
New to sql tunning Here why cardinality goes to 67 and cost to 5???
Thank you for your time.. :) -
Print Row Numbers and Column Letters
How do you tell Numbers to print the Row numbers and Column letters? This was very simple in Appleworks (print dialog box had that option). Can't find it in Numbers though.
Here is a script doing all the job for us.
Just select one or several cells in a table and run the script.
It duplicates it, add an header row, an header column, insert the needed labels and fill the other cells with a formula grabbing the contents of the original table.
--[SCRIPT build a table with headers]
Enregistrer len tant que Script: build a table with headers.scpt
déplacer le fichier créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Selectionner une cellule dans la table à dupliquer
menu Scripts > Numbers > build a table with headers
Le script duplique la table et crée des en-têtes de lignes et colonnes.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
+++++++
Save the script as Script: build a table with headers.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a range of cells in the table to 'duplicate'
menu Scripts > Numbers > build a table with headers
The script duplicate the table and inserts columns/rows headers.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
--=====
Yvan KOENIG (VALLAURIS, France)
2009/09/19
--=====
property theApp : "Numbers"
--=====
my activateGUIscripting() (* to be sure than GUI scripting will be active *)
set {d_Name, s_Name, t_Name, r_Name} to my getSelection()
if r_Name is missing value then
if my parleAnglais() then
error "No selected cells"
else
error "Il n'y a pas de cellule sélectionnée !"
end if
end if
set new_Table to t_Name & "_#"
my duplicateTable(s_Name, t_Name, new_Table)
set delim to my getLocalizedDelimiter()
(* grab localized function names and add an open parenthesis at end *)
set IF_loc to my getLocalizedFunctionName("Numbers", "IF") & "("
set CHAR_loc to my getLocalizedFunctionName("Numbers", "CHAR") & "("
set INT_loc to my getLocalizedFunctionName("Numbers", "INT") & "("
set MOD_loc to my getLocalizedFunctionName("Numbers", "MOD") & "("
set INDIRECT_loc to my getLocalizedFunctionName("Numbers", "INDIRECT") & "("
set ADDRESS_loc to my getLocalizedFunctionName("Numbers", "ADDRESS") & "("
(* grab localized function names and add a couple of parenthesis at end *)
set ROW_loc to my getLocalizedFunctionName("Numbers", "ROW") & "()"
set COLUMN_loc to my getLocalizedFunctionName("Numbers", "COLUMN") & "()"
tell application "Numbers" to tell document d_Name to tell sheet s_Name to tell table new_Table
if column count = 256 then
if my parleAnglais() then
error "Oops, already 256 columns !"
else
error "Désolé, il y a déjà 256 colonnes !"
end if
end if
if row count = 65536 then
if my parleAnglais() then
error "Oops, already 65536 rows !"
else
error "Désolé, il y a déjà 65536 lignes !"
end if
end if
try
add row above row 1
on error
if my parleAnglais() then
error "Oops, already five header row !"
else
error "Désolé, il y a déjà cinq rangs d’en tête !"
end if
end try
try
add column before column 1
on error
if my parleAnglais() then
error "Oops, already five header columns !"
else
error "Désolé, il y a déjà cinq rangs d’en tête !"
end if
end try
set nbr to row count
set nbc to column count
(* =IF(COLUMN()<28,CHAR(COLUMN()63),CHAR(INT((COLUMN()-2)/26)+64)&CHAR(MOD(COLUMN()-2,26)65)) *)
set theFormula to "=" & IF_loc & COLUMN_loc & "<28" & delim & CHAR_loc & COLUMN_loc & "+63)" & delim & CHAR_loc & INT_loc & "(" & COLUMN_loc & "-2)/26)+64)&" & CHAR_loc & MOD_loc & COLUMN_loc & "-2" & delim & "26)+65))"
tell row 1
repeat with c from 2 to nbc
set value of cell c to theFormula
end repeat
end tell -- row 1
(* =ROW()-1 *)
set theFormula to "=" & ROW_loc & "-1"
tell column 1
repeat with r from 2 to nbr
set value of cell r to theFormula
end repeat
end tell -- column 1
(* =INDIRECT(ADDRESS(ROW()-1,COLUMN()-1,,,"Tableau 2")) *)
set theFormula to "=" & INDIRECT_loc & ADDRESS_loc & ROW_loc & "-1" & delim & COLUMN_loc & "-1" & delim & delim & delim & quote & t_Name & quote & "))"
repeat with r from 2 to nbr
repeat with c from 2 to nbc
set value of cell r of column c to theFormula
end repeat -- with c
end repeat -- with r
end tell -- Numbers
--=====
Set the parameter delimiter which must be used in Numbers formulas
on getLocalizedDelimiter()
if character 2 of (0.5 as text) is "." then
return ","
else
return ";"
end if
end getLocalizedDelimiter
--=====
on getLocalizedFunctionName(theApp, x)
local p2bndl
set p2bndl to (path to application support as text) & "iWork '09:Frameworks:SFTabular.framework:Versions:A:Resources:"
return my getLocalizedName(theApp, x, p2bndl)
end getLocalizedFunctionName
--=====
on getLocalizedName(a, x, f)
tell application a to return localized string x from table "Localizable" in bundle file f
end getLocalizedName
--=====
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
tell application "Numbers" to tell document 1
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
try
(selection range of table y) as text
on error errMsg number errNum
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
return {theDoc, theSheet, theTable, theRange}
end try
end repeat -- y
end if -- x>0
end tell -- sheet
end repeat -- i
end tell -- document
return {missing value, missing value, missing value, missing value}
end getSelection
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
on isItAsheet(s)
try
tell application "Numbers" to tell document 1
count of tables of sheet s (*
Post an error if s is not a sheet *)
end tell
return true
on error
return false
end try
end isItAsheet
--=====
on activateGUIscripting()
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true (* to be sure than GUI scripting will be active *)
end tell
end activateGUIscripting
--=====
on duplicateTable(sourceSheet, sourceTable, newName)
local lesFeuilles, lesTables1, found, listOfRows, cor, i, isSourceSheet, nameI, j, lesTables2
tell application "Numbers"
activate
tell document 1
set lesFeuilles to name of sheets
if sourceSheet is in lesFeuilles then
tell sheet sourceSheet to set lesTables1 to name of tables
if sourceTable is not in lesTables1 then
if my parleAnglais() then
error "The sheet “" & sourceTable & "” of sheet “" & sourceSheet & "” is unavailable ! "
else
error "La table “" & sourceTable & "” de la feuille “" & sourceSheet & "” n'existe pas ! "
end if
end if -- sourceTable is not
else
if my parleAnglais() then
error "The sheet “" & sourceSheet & "” is unavailable ! "
else
error "La feuille “" & sourceSheet & "” n'existe pas ! "
end if
end if -- sourceSheet is in
end tell -- document
end tell -- application
if newName is not in lesTables1 then (*
Now, an ugly workaround to duplicate the sheet *)
set isOS4 to (system attribute "sys2") < 5
tell application "System Events" to tell application process "Numbers"
set docWindow to false (* CAUTION, an inspector ("AXFloatingWindow") or a Find/Search ("AXDialog") window may be open *)
repeat with i from 1 to (count of windows)
if subrole of window i is "AXStandardWindow" then
set docWindow to i (* got the document's window *)
exit repeat
end if
end repeat
if docWindow is not false then
tell outline 1 of scroll area 1 of splitter group 1 of splitter group 1 of window docWindow
select row 1
set value of attribute "AXFocused" to true
set found to false
set listOfRows to name of static text of every row
set cor to count of rows (* equal count of listOfRows *)
if isOS4 then (*
for mac Os X 10.4.11
CAUTION, listOfRows it's a list of lists !
{{"Feuille 2"}, {"Tableau 1"}, {"theSheet"}, {"Feuille 1"}, {"Tableau 2"}, {"Clément"}, {"Feuille 4"}} *)
repeat with i from 1 to cor (*
Scan the thumbnails *)
set nameI to item 1 of item i of listOfRows
set isSourceSheet to (sourceSheet = nameI) and my isItAsheet(nameI)
if isSourceSheet then
select row i
if (i < cor) and not my isItAsheet(item 1 of item (i + 1) of listOfRows) then (*
Here we may scan the thumbnails of tables of sourceSheet *)
repeat with j from i + 1 to i + (count of lesTables1)
if sourceTable = item 1 of item j of listOfRows then
select row j
set found to true
exit repeat
end if -- sourceTable
end repeat
else
if my parleAnglais() then
error "The sheet “" & sourceTable & "” of sheet “" & sourceSheet & "”" & return & " is not revealed in thumbnails ! "
else
error "La table “" & sourceTable & "” de la feuille “" & sourceSheet & "”" & return & " n'est pas affichée dans les vignettes ! "
end if -- my parleFrancais
end if -- (i < cor)
end if -- isSourceSheet
if found then exit repeat
end repeat -- i
else (*
for mac Os X 10.5.x
CAUTION, listOfRows is a list of lists !
{{}, {"Tableau 1"}, {"theSheet"}, {}, {"Tableau 2"}, {"Clément"}, {}}
With 10.5.x, the names of sheets are empty *)
repeat with i from 1 to cor
set isSourceSheet to (class of UI element 1 of row i is group) and (get value of static text 1 of group 1 of row i) is sourceSheet
if isSourceSheet then (*
Here we may scan the thumbnails of tables of sourceSheet *)
if value of UI element 1 of group 1 of row i is 0 then (*
reveal the tables's thumbnails and adjust the list accordingly *)
click UI element 1 of group 1 of row i (* click the black triangle to reveal tables *)
delay 0.1
set listOfRows to name of static text of every row (* update the list accordingly *)
end if -- value of UI…
repeat with j from i + 1 to i + (count of lesTables1)
if sourceTable = item 1 of item j of listOfRows then
select row j
set found to true
exit repeat
end if -- sourcetable
end repeat -- with j
end if -- isSourceSheet
if found then exit repeat
end repeat -- with i
end if -- check OS
end tell -- outline …
keystroke "d" using command down
end if -- docWindow
end tell -- System Events…
if docWindow is not false then (*
Rename the new table according to the passed name: newTable *)
tell application "Numbers" to tell document 1 to tell sheet sourceSheet
set lesTables2 to name of tables
repeat with i in lesTables2
if i is not in lesTables1 then (*
Here i is the name of the newly created table *)
set name of table i to newName
exit repeat
end if
end repeat
end tell
end if -- docWindow
end if -- newName is not…
end duplicateTable
--=====
on parleAnglais()
local z
try
tell application theApp to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
Yvan KOENIG (VALLAURIS, France) samedi 19 septembre 2009 17:33:59 -
How do I delete multiple rows and columns in an image?
I am looking into how digital SLRs extract video data from a CMOS sensor. To give an example, the GH1 from Panasonic can record video at 1920 x 1080 from a 12 MPixel sensor that, say, is 4000 horizontal x 3000 vertical. How they do that seems to be not in the public domain, but there have been a few guesses (see http://www.dvxuser.com/V6/showthread.php?t=206797 and http://luminous-landscape.com/forum/index.php?showtopic=38713).
One approach would be to simply read every second row of sensor pixels (1500 rows read from the original 3000) and once you have those in memory, delete every second column (2000 columns left). You would end up with a 2000 x 1500 image which could then be resampled to 1920 x 1080.
I'd like to simulate what the camera appears to be doing, by generating a 4000 x 3000 test image and then asking Photoshop CS4 to delete the appropriate rows and columns. It may not necessarily be every second row; the Canon 5DMk11 appears to read every third row, so I may need to delete two out of every three rows.
Can Photoshop do that sort of thing? If so, how?Thanks for the suggestions. Yes, I did take a detailed look at your images, but they weren't 100% convincing because it wasn't clear just what was happening. And Adobe's explanation, after reading it again, explains nothing at all to someone who doesn't know how Nearest Neighbor works.
But you are correct -- Nearest Neighbor does effectively delete pixels. I proved it with the attached 6 x 6 image of coloured pixels (the tiny midget image right after this full stop -- you'll have to go to maximum zoom in PS to see it).
These are the steps to delete every second row and then every second column.
1. Select Image > Image Size.
2. Set Pixel Dimensions > Height to half the original (in this case set to 3 pixels).
3. Set Resample Image to Nearest Neighbor.
4. Click OK and the image shoould now consist of three vertical white strips and three vertical Green-Red-Blue stripes.
5. Repeat steps 1-4, but this time set Pixel Dimensions > Width to half the original (in this case set to 3 pixels). The image should now consist of three horizontal stripes Green-Red-Blue.
Just to make sure the method worked for every third pixel, I repeated the above steps but with 2 pixels instead of 3 and obtained the correct White-Green, White-Green pattern.
I resampled the Height and Width separately for the test so that I could see what was happening. In a real example, the height and width can be changed at the same time in the one step, achieving the same results as above.
Finally, how to explain how Nearest Neighbor works in the simple cases described above?
Division by 2
In the case of an exact division by two (pixels numbered from top leftmost pixel), only the even numbered rows and columns remain. To put it a different way, every odd numbered row and column are deleted.
Division by 3
Only rows and columns 2, 5, 8, 11... remain.
Division by N
Only rows and columns 2, 2+N, 2+2N, 2+3N... remain.
To put it simply, a resample using Nearest Neighbor (using an exact integer multiple) keeps every Nth row and column, starting from number two. The rest are deleted. -
Can numbers open and view excel files with filters applied?
Hi - I don't currently have iWork but was considering purchasing it. I frequently get sent excel files from work (which I view on my iPad 3) that have got filters in the column headings applied and I need to be able to change the dropdown values in the headings to see different cuts of the data in the spreadsheet. Does anyone know if the current version of Numbers allows users to do this?
Numbers has a row filtering feature, but it doesn't involve the Header or any dropdown menus. In Numbers row filtering is controlled from the Reorganize Panel which is activated from the Toolbar. Given this, I don't think an imported Excel document will have the filtering feature active. Hopefully someone who uses both Execl and Numbers will weigh in.
Jerry -
Importing a .csv file into numbers
thanks in advance for any help you can provide.
i am a spreadsheet newbie. i am attempting to open a .csv file in numbers. this file when opened on the internet does have each filed seperated by commas, not tabs. when i drag it into numbers, it opens each line in its own row, however it puts the entire information (lets say 5 commas worth) in one column.
so what i am getting is everything in a numbered row but the program does not appear to be recognizing the commas as a reason to put the information in its own column.
this is not a life threatening endeavor, i am just trying to organize my guitar magazine collection. i would like to find the song by doing a search of columns/rows and i do not think i can do it as is.
thanks again...
Message was edited by: pensncrows60wpm wrote:
I've tried putting in: ¶ - then for MS Word I heard you could put in ^p and/or \n --- but they didn't work.
!? -- So what do I put in the Replace Text Field box?
To type a return into the Find/Replace dialogue, Pages uses option-return, Text Wrangler uses command-return (or type \r), haven't checked Text Edit.
If you Show Invisibles (View menu in Pages, Edit menu > Text Options in Text Wrangler, text Edit doesn't appear to have the option of viewing the invisible characters), you can copy a return, and paste it into the box in pretty much any application that will display the invisible characters. Actually, you should be able to copy the return character even without being able to see it—select from just after the last visible character in a 'paragraph' to the very beginning of the next line, Copy—but it is nice to be able to see what you're doing.
(I have Pages, MacJournal, Bean, & Text Wrangler and a few other word processing program)
One note on Pages: Pages does not offer the option to Save as..Text. For that, you have to go File > Export... and choose Plain Text.
To restate the problem (and I appreciate your help)
I have a new mailing list with about 100 emails that are separated by commas. The program I'm using seems to require each email be on a separate line. So instead of:
[email protected], [email protected]
I want:
[email protected],
[email protected]
So I just want to do a find and replace on "," and replace it with ", carriage return".
It would be SO GREAT to finally overcome this hurdle.
Any of the three options above should do the job.
Regards,
Barry -
The 'Load Details' screen doesn't show the rows for 'Loaded'
Hi All,
May I request for inputs on the following issue please. Request iSetup Development to confirm if this is the intended feature.
Customer complains that when they view the details of a Load, the 'Loaded' column doesn't show any numbers (rows).
Customer expects to see the numbers for this column. Why this is left blank?
I can see that even the documentation shows the blank column.
Oracle® iSetup User's Guide Release 12.1 Part No. E12899-04
CHAPTER 5: Migrations
Viewing a Load (Page 5-35)
The above page shows the Screenshot of 'Load Details'. The 'Loaded' column doesn't show any details. It is blank.
Request for confirmation.
Regards,
Ramana.Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you wish to enable the reveal password icon for your system. I am happy to help. It really depends on which version of the Operating system you are running, because this sort of thing is normally controlled using the Group Policy Editor. That tool is not a part of a Home edition, you would need the Pro version or higher to have that. Assuming that you do have a pro edition or higher, then these may be of help to you:5 Ways to Access Local Group Policy Editor on Windows 10 - isunshare.comDisable or Enable the new Password Reveal Button feature in Windows 8 - windowsclub.com Unfortunately the version of Windows 10 I have installed beside me is the home edition as well, so I cannot access this, to verify, so let me know if that works for you. -
Applying percentage reduction to a row of cells
I'm trying to figure out what the equivalent of paste special>values>multiply from excel would be in numbers.
Basically i have a row of different numbers ( row 3) that a big financial model relies upon. I want to put a % in a new cell and use the slider on that cell, then apply the % to a selection of the cells in row 3.
This will enable me to adjust the whole model, by sliding the % of 1 cell.
So lets say a cell on row 3 has the value of 3000. By moving the slider to 50% would reduce the value of that cell to 1500.
I know i could make another row, which woud contain the results keeping the origional row 3 at their current values, and use the new row to feed the rest of the spread sheet, but its a massive financial model, and i'll miss something.
Many thanksNumbers does not have a feature to modify the contents of a cell and place the result back into the same cell. The best solution is to either:
1) make a new row that has the original row multiplied by the %
2) make a new table that you can hide to hold the non-modified values andstore the modified values in their place in your original row of the table -
Hello expert users, my first post here,
I have a table that has four columns. The cells in the first column should be numbered. I have set up a style with tiered numbers (which is the numbering I need). Each cell, however, carries number 1, although the option "Continue from previous" is selected. Does Pages not support numbering across table cells, does it restart numbering in each cell by default?
BernhardYou didn't understand the way lists behaves.
They apply to a chunk of text.
A cell's contents is a chunk of text and the list tool may apply in a given cell.
You are trying to apply numbering to several cells.
They aren't A chunck of text but several ones.
The list tool treats them separately and logically it starts from 1 in evey chunck.
Numbering rows is quite easy if we take time to read the User Guide.
Type 1 in cell A1
Type 2 in cell A2
select both cells then drag to the bottom the circular handle available at bottom of cell A2.
With iWork '09 there is a new feature.
Type a1 in cell A1
select the cell and drag the circular handle to the bottom.
You will get
a1
a2
a3
a4
Yvan KOENIG (from FRANCE jeudi 15 janvier 2009 17:57:33)
Maybe you are looking for
-
Boot Camp Problem with Windows Vista Installation
After putting in the disc and pressing the "Start Installation" button, the macbook pro restarts and and the screen goes gray for quite awhile, eventually the Vista installer loads, but I get the following error and cannot continue: "A required CD/DV
-
Could not order iphoto book due to error not enough photos are filled
I am not able to buy the iphoto book , as there is a message that there is no enough photos in the frame , though every page as all the photos filled up . Please help
-
I am working with beat markers and it was going along fine until suddenly everything went awry. I dropped in a bunch of photos and the last photo assigned itself a time of over 3 minutes. Beat markers are at less than 1 second. I have removed the
-
hi All, I've run: stsadm -o enumsites -url <webapplication name> and that's brilliant, but I need to know find information size on the root site collection so what it holds, and all the webs etc. it has any suggestions how I achieve this? Thanks
-
Is there a way i can delete triples of a photo with out doing it all day
hello my son transfered all my pics to external HD I transfered them back to my mac into Iphoto & when I looked omg all my pics have doubles or triples is there some way I can delete the doubles & triples with out being here all day doing it by hand