Numbers Won't Export Eitlher!!!

This is ridiculous. Can't email or export numbers files. Can't do a restore to get my notes back until I can export my spreadsheets so I don't lose those too.

Yes, I upgraded my iPad to 3.2.1 before I noticed this problem. I have exported my Numbers spreadsheets before. I have several spreadsheets and am able to export all but one. The one I really need to export (of course) has multiple tabs in it. I thought maybe it was too large, even though I have been able to export it before with no problems. I copied the first tab into a new file and I still have the same problem. I choose "Export" and the it has a progress bar that goes about halfway and then it quits. When it quits it returns me to the home screen of the iPad.
I really need to try to get my notes back that I lost after the upgrade but I can't even attempt this until I can figure out how to export this spreadsheet. My understanding is I will lose everything on my iPad and then when I use a backup file to put everything back on my iPad it will be data from that date of the backup. I have updated this spreadsheet (daily) since the upgrade but I could recreate what I have updated since then if necessary.
To make matters worse, I am leaving on vacation Friday and can't worry about any of this right now. I need my iPad (& my notes)for this trip but I won't be able to fix it before then.
Sorry to rant this is frustrating.

Similar Messages

  • Numbers won't export to pdf

    Whenever I try to export to pdf from Numbers, I get this error message:
    This is frustrating because of course the file does not exist. I want numbers to create the file. I like numbers as a program, but I can't just send people numbers files, they can't open them. I need to be able to easily pdf my work.
    The method I'm using is File>export to>pdf... Then I once that window is open I select next, choose a name to save the pdf, and then I get the above error message.
    I'm using Numbers 3.5.2.
    I successfully saved as pdf from the print screen, but I don't want to have to take 3 extras steps just because the export command has a bug.

    Suggest in your menu Numbers > Provide Numbers Feedback that you report this problem to Apple... after, of course, you have tried closing Numbers, and restarting your Mac to see if the problem still persists. It might be a temporary glitch.
    SG

  • Podcast won't export from Garageband to iWeb

    Hi all
    Help appreciated with this. I do a two hour music podcast (www.whatyouwantradio.com also available at http://soundcloud.com/whatyouwant-radio) which is created in Garageband and then exported to iWeb for uploading to my website. I've been running this, with few problems, since April 2009.
    Recently the garageband podcast won't export to iWeb. It's random, and I seem to have been able to bypass it by changing the filename slightly, or adjusting the quality at which it is exported (I like to export at 320mps for best quality - big files but no complaints from the 100 or so listeners. Could be more - who knows as I can't get stats from iTunes. But I digress). However, the most recent podcast, which is already available on Soundcloud, just won't export. It goes through the motions (mixdown etc.) but nothing appears on iWeb on the other side. No error message, nothing. I know that memory has also been an issue in the past but right now there is plenty to spare (5.37GB at last glance).
    I'd really be grateful for some help on this, I'm at a bit of a loss - no error message, no clue. As I say, this podcast has been going for nearly three years and it's only recently I've had this problem.
    Cheers,
    Stuart
    Mac OS X 10.6.8
    Garageband '09 5.1
    Model Name:
    MacBook
      Model Identifier:
    MacBook5,1
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2.4 GHz
      Number Of Processors:
    1
      Total Number Of Cores:
    2
      L2 Cache:
    3 MB
      Memory:
    4 GB
      Bus Speed:
    1.07 GHz
      Boot ROM Version:
    MB51.007D.B03
      SMC Version (system):
    1.40f2
      Serial Number (system):
    W8912A098QT
      Hardware UUID:
    CE258311-95FB-5BB2-BF43-DC494598B584
      Sudden Motion Sensor:
      State:
    Enabled

    Just a further note on this. I tried a couple more times yesterday to export the file. Starting out with over 5GB of memory, by the time I had tried twice this had gone down by a couple of GB. Still no export. This morning I noticed some new files in the trash that were from around the time of the failed exporting:
    Note sure if you can see that, but I'm guessing the files are something to do with the failed export? Does anyone have any thoughts? Either way, this problem is still annoying the **** out of me...
    Stuart

  • OMF won't export out of final cut pro.

    Exporting a 93min 1920x1080 HD timeline to OMF
    5 second handles tried 2 second handles as well.
    OMF won't export out of final cut pro. Get error message there is a 2 gb limit.
    Final cut 6.0.6
    Have deadline. Didn't see it on any forum. Help!! Thanks!!

    Seems like a weird thing to not be able to do since it's called final cut PRO...
    Bagging on Final Cut Pro for OMF? HA! OMF has been around LONG BEFORE FCP was introduced. It isn't an FCP issue...OMF technology is VERY old. Over 20 years I believe. I used it on Avid...and it always had a 20GB limit.
    You cannot deliver 1 track via OMF. You can ask the audio person. I know that Avid now allows you to export an AAF...but FCP doesn't do AAF. For embedded audio I think that OMF is the only way. SO you have to work within the limitations of that format.
    Shane

  • InDesign CS5 won't export to PDF

    I've been having a problem recently when exporting to PDF in InDesign CS5.  I get an error message which says:
    1 problem was found with a background task:
    Export: "NameOfDocument" (1)
    It won't export to PDF.  What can I do about this?  Many thanks.

    Oh, sorry.  Forgot about the specifics.
    Local drive on Win7.  Yes, file naming conventions adhered to.

  • New Quicktime 7.6.6 (1671) won't export WAV files

    HELP! - New Quicktime 7.6.6 (1671) won't export WAV files. I just did the automatic upgrade to the new version of Quicktime and now I can't export WAV files from a CAF file. The original .CAF file plays perfectly but when I attempt to export it the exported file is corrupted and won't play. I have another computer with the previous version of Quicktime and it exports the same file flawlessly. Anyone know what's going on with the new version? THANKS!

    +Error writing to the file: C:\Program Files\iTunes\iTunesMiniPlayer.Resources\nb.lproj\iTunesMiniPlayerLocalized.dll. Verify that you have access to that directory.+
    More often than not, that sort of message indicates file damage rather than a privileges issue on the file.
    If you've got Windows XP, try doing a chkdsk over your C drive, as per:
    How to perform disk error checking in Windows XP
    If you've got Vista, try the following procedure. Go "Start > Computer". Right-click on "Local Disk C:" and select "properties". Click the "Tools" tab. Click the "Check now" button in the "Error correction" section.
    Do the disk checks find/repair any damage? If so, does an install go through properly afterwards?

  • FCP won't export M2V

    I am running FCP Studio and trying to export an m2v. I recently upgraded my G5 and basically put my old hard drives right into the new G5 box. Since I did that, FCP asked for a serial number again, and I entered it. OK. Now I am trying to export the Mpeg2 and it says it can't export until DVD studio Pro is serialized - but then I run DVD studio pro and it IS serialized and registered. Restart did not fix it. FCP just can't seem to tell that DVD studio pro is already serialized and won't export. Should I trash my preferences? FCP or DVD studio pro or both? Any suggestions?

    FYI....
    Trying to uninstall DVD Pro and then re-installing it will not work! I ran through this problem when I upgraded to FCP Studio. The issue lies between DVD Pro and QT7, it is a bug that apple is currently trying to resolve.
    I spent numerous hours on the phone with apple to get this issue resolved. The best work around at the moment is going through Compressor and making a M2V. Compressor will retain your chapter markers from FCP no worries.
    The only issue is time, it takes longer using compressor but the quality is 100x better because you have more control of the VBP.
    Good Luck

  • Cropped song settings won't export to slideshow

    For some reason, my start/stop time settings for individual songs in itunes won't export to an iphoto slideshow. Is there another way to do this?

    David,
    Your right. Changes made to the stop and start time of songs in iTunes don't seem to have any effect in iPhoto.
    I suppose one work around would be to first burn the music for your slide show to a music CD and then reimport the tracks.
    You could also use iMovie, GarageBand or a third party app like Sound Studio to actually edit the tracks (probably best to edit copies of the tracks) and then reimport the edited tracks back into iTunes.
    Kind of a hassle. I'll continue to think a bout a more elegant solution.
    Matt

  • One font won't export

    Hi, all. Sorry if this is basic--I'm just a simple artist-designer, and am less skilled at software management and presets.
    I just reinstalled my ID CS4 on a new-to-me machine running OSx Mountain Lion. For an unknown reason, the software now won't export the Helvetica Neue Regular font (all other fonts in the typeface are FINE.) 'Regular' exports as lines of boxes. HNeue has been my go-to for many years, and I'd rather not reformat all of my old stuff. Thoughts?
    HNeue Regular shows up in fontbook, and I already tried 'restore system fonts.' Also set "Subset all Fonts" to 0%. I have no idea what this means, but the internet told me to do it.
    Thanks for your ideas. This is really messing me up.
    Emily

    Saw this post and thought it can be easily fixed but I haven't worked on a Mac for about 10 years. I'm sure there's someone that can help.
    The only thing I would suggest trying is disabling it in your Font Management and copying the font to your system Fonts folder.

  • Sequence won't export in quicktime movie

    I have Final Cut Express and for some reason a sequence won't export into a Quicktime movie, but a Final Cut Express movie file.
    Any ideas why this is happening?
    Thanks
    Barry

    Thank you both for the input.
    I didn't realize this. This was the first time the file I exported didn't have the Quicktime icon, or named a Quicktime File.
    Does this type of file still work on Internet sites like Facebook?
    Much appreciated.
    Barry

  • IPhoto '08 won't export pics

    iPhoto '08 won't export any files. I've tried jpegs and tiffs and iPhoto 08 just hangs during export - I've had to "force quit" it - any ideas? I've tried exporting just one pic and let it run for close to 5 minutes before giving up.

    ggrosh
    Try rebuilding the database. Hold down the apple and option (or alt) keys and launch iPhoto. Use the resulting dialogue to rebuild.
    If that doesn't work try trash the com.apple.iphoto.plist file from the home / library / preferences folder.
    Regards
    TD

  • InD suddenly won't export to pdf

    I've been exporting files to pdf all day to send to my printer, and suddenly InDesign won't export anymore. Pop ups open as usual, but nothing happens.Grrrrrrr!!

    Are you patched to 7.0.4?
    Is the export hanging in the background, or is a file  supposedly created, but non-exisitent? Have you opened the Background Tasks panel to see if the task is completing?
    Can you export in the foreground by putting the file in a Book?

  • QT won't export to WMV

    I made a movie out of a powerpoint presentation, and it exported into .mov file just fine. But it won't export as a .wmv file. I've tried every one of the settings, but it only captures the first 25 seconds or so.
    PPC G4 Mac OS X (10.3.9) 1GHZ, 640 RAM

    Export from QuickTime Pro to WMP formats is not a part of the standard QT Pro install.
    It is enabled by the http://flip4mac.com component. To export more than 30 seconds you must purchase the upgrade for their product.

  • Pages won't export to Word

    Running latest Pages in latest Lion on a new iMac. When I try to export to Word, I get an error message: "The file format is invalid."
    A Word doc IS actually created, but it has all Comments stripped out...making it utterly useless to me. I've tried uninstalling iWork 09, restarting the iMac, then reinstalling (and re-upgrading) iWork 09 from the original disc, but no love -- it just won't export a Word file with Comments.
    Anyone else having this problem? Anyone have a solution?
    Thanks!
    Barry

    Well, I tried export to Word before saving the document in Pages. It worked fine! I didn't finalize the changes in any way. I could open the .doc document and it still showed the changes and comment field.
    I think something is corrupt in your document. You could select the content and paste into a new blank template and save it and then export to a Word document. Then undo all changes in the original document to the point you started the changes and copy and paste  into a new document and give it a different name. Now you have a before and after the changes and hopefully the  corruption didn't get copied over.

  • Xcelsius won't export to PPT or DOC

    -Operating System:  XP Professional 2002 SP2
    -OS Patch level:  SP2
    -Office Version:  XP 2002
    -Flash Player version: Adobe Flash Player 9 ActiveX
    -Xcelsius Version and Patch Level: Xcesius present 2008 5.0.0.99
    -Xcelsius Build number (Help>About Xcelsius):12,1,0,247
    -Business Objects Enterprise version/patch level (if applicable):
    -Issue Description:  Won't export to powerpoint or word, but will export to PDF.  When exporting to powerpoint, Xcelsius say's it is generating an SWF.  It will then open powerpoint with a new presentation that only has a box with a X through it.  Otherwise the presentation appears to have no content.  selecting presentation mode does not help. 
    A similar thing happens when exporting to word, but after the "generating SWF" dialog box goes away, nothing happens, word does not open, and I can not find a new word file.
    However, I can successfully export to PDF and the flash works.
    -Steps to Duplicate:
    1. create content in xcelsius
    2. select file/export/powerpoint or file/export/word
    3. enter file name for PPT or DOC file
    4. save or enter to close dialog box

    Hi markbb,
    I notice that you are running Xcelsius Present 2008 Version 5.0.0.99
    This is a totally upatched version and I suggest that you upgrade to the current SP2 (Service Patch 2) level
    You can download this from http://www.sdn.sap.com/irj/sdn/businessobjects-downloads
    You may also need to upgrade your Office to 2003
    Regards
    John

Maybe you are looking for