Numeric pointers on the FM extract.

I know that there is no option for 'numeric pointers' on a delta type if the extraction is by FM. Is there anyway i can change this at a table level. I really need this option due to 'timestamps' and 'calendar day' not be,ing effecient for this extractor.
Thanks

for restrictions on the delta ability of the FI-SL total datasources
please refer to the following path in the SAP Help Portal;
http://help.sap.com/saphelp_nw04/helpdata/en/65/7beb3cad744026e10000000a
11405a/frameset.htm
- Financials
    - Financial Accounting
      - Special Purpose Ledger
         - Generated DataSource for Special Ledger
Also, please try to repeat step 6 of note 328197 and see notes 727715 and 583086.
Colin

Similar Messages

  • I have completed the generic extraction - an i find values for numeric ?

    Hi all,
    Generic extraction can be done using:
    1. calendar day
    2. Timestamp
    3. Numeric pointer.
    I have used numeric pointer - in which table can i see the flag for numeric pointer.
    And for timestamp and calendar day - in which table can is see when was the last extraction happeneed for generic extraction using timestamp and for calenday day.
    Thanks
    Pooja

    hi,
    check the delta pointer for that datasource in table ROOSGENDLM.
    regards
    mohammed

  • How can I change the numeric format of the cursor coordinates display in LV 8.2

    Since LV 8.0 or so the cursor display window of a graph indicator seems to be a tree control. I couldn't find where to change the numeric format of the numbers displayed in that control. What did I miss?

    lecroy wrote:
    Maybe I'm not clear on what your looking for but I just use a property node and route the raw cursor data out to what ever function I want to run on it, then display it in a seperate field.  The nice thing with the property node is you can have multiple graphs linked together by one set of cursors all with different readouts. 
    Yes, of course that's an option and I guess I'll have to do it that way.
    The point is that I converted a pre-LV-8.x program to LV 8.5. In the program I had used the coordinates display field in the cursor legend to display the position, just the was the cursor legend is supposed to be used, IMO. And in pre-LV-8.x days it was possible to customize the numeric format property of the cursor legend (either directly or by property nodes). It seems that with LV 8.x NI chose to use a treeview control for the cursor legend. With that 'improvement' the numeric formatting flexibility was lost since now the conversion to the string content in the cursor legend's treeview is happening somewhere 'under the hood'.
    <rant> Why do they (NI) always try to 'improve' things (where nothing needs be improved) and sacrifice functionality on the way....? </rant>

  • How to 'Only' allow Numeric value in the Edit Box in AcroDialogs

    Hi all,
    I've create an AcroDialog wizard, I need to allow onlu numeric values in the Edit Box. Can someone please help me with this validation?
    Regards,
    Chris

    There isn't a keystroke event for custom JavaScript dialogs, or any proper interactive events for the fields.  You can validate fields when the user presses OK, and you can test fields when the user changes focus by setting the "Action" property for the field.  But the only practical way to restrict user input to numbers is to use George's suggestion.  There is a number property for the fields but it has an undesirable side affect and I never use it.
    Thom Parker
    The source for PDF Scripting Info
    pdfscripting.com
    The Acrobat JavaScript Reference, Use it Early and Often
    http://www.adobe.com/devnet/acrobat/javascript.html
    Then most important JavaScript Development tool in Acrobat
    The Console Window (Video tutorial)
    The Console Window(article)

  • Add fields in the BW extraction structure

    Dear Experts:
         Today I have added a field "UEPOS" in the BW extraction struction MC11VA0ITM. UEPOS is the standard field of the SAP TABLE VBAP.  When I test the extraction of the new field the system did not move the corresponding value from VBAP to it.
          My question is, in addition to use CMOD enhancement, how can I make the new field have the right value?
    Best Regards
    David Wang
    Edited by: David Wang on Dec 26, 2008 4:51 PM

    Hey!
    I don't know exactly at the moment but isn't it possible to make the extension of this field over the LO Customizing Cockpit (LBWE). If, your field would be filled automatically.
    If you have done the extension with an append Ajeet is right if you don't find that field in you extraction result in RSA3. If you have the field but no value for this field maybe something in your CMOD exit is wrong.
    The easiest way is to debug your coding there. You can do this over RSA3, there is a check box for debugging.
    Try this out. If you not even have implemented this exit I think you can find a lot of help here in the forum. Maybe this helps you to check:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46
    But be aware that this example is for master data. Choose the right exit for transactional data.
    Best regards,
    Peter

  • Creation of Idocs from the change pointers by the program RBDMIDOC

    Hello,
    I'm Creating Idocs from the change pointers by the program RBDMIDOC.
    The IDOCS Created using the message type HRMD_A are Correct but when i try to RUN RBDMIDOC for message type HRMD_B no Data is selected for distribution.
    All the customizing are similar and i presume that all the change pointers are active (BD50 and IMG->Personnel Management -> Organizational Management  -> Basic Settings -> Activate change documents).
    Can anyone help me with the necessary steps to create this IDOC types.
    Do anyone know if the RBDMIDOC report is the Same for messages HRMD_A and HRMD_B.
    Thanks in Advance,
    Pedro Ferreira

    If the setting is fine, there may be some code in exit or badi for program RBMIDOC. Check the Exit and BADI.
    check the exit EXIT_SAPLBD11_001 and
    check the badi IDOC_CREATION_CHECK.
    Probably there may be some code on these exits which are stoping your code from getting generated.These are the two trigger happen once u execute the RBMIDOC program.for HR, we use RHALEINI program to generate the idoc. but even RBDMIDOC works. These 2 triggere will come with RHALEINI also.
    If there is no code here, Then there is problem in the setting only.

  • 'Error 8 occurred when starting the data extraction program'

    Hello Experts,
    I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
    So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
    But when I check the extractor through RSA3, it looks fine.
    Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
    Thanks
    Regards,
    KP

    Hi,
    Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
    Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
    rgds,
    Edited by: Krishna Rao on May 6, 2009 3:22 PM

  • Invalid data status error during the data extraction

    Hi,
    while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
    when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
    how can i rectify the data extraction problem..can you advice.
    Thanks,
    Dhanush

    Sir,
    In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors.

  • Get the "cannot extract embedded fonts" error message

    I get the "Cannot extract embedded font 'UZNVZW+HElveticaNeueLTStd-Hv-Identity-H'. Some characters may not display or print correctly." error message when I generate a PDF from MadCap Flare or Frame Maker. I am on Windows 8 64-bit / Adobe Acrobat 11 / FrameMaker 9 / MAdCap Flare 9.
    When I do the same task on a Windows 7 system, works like a whistle.
    I am looking at a solution and no workarounds.
    Regards,
    AxDe

    Hi hartmanja14,
    Please let me know if this is happening with all PDFs or any specific document?
    Also, tell me if that document has been created by any third party or not.
    Regards,
    Anubha

  • IPad2... after synch with my Mac, I now have numerous duplicates of the same PDF files in Books.  Can't select them to delete them.  Can't move them.  Any suggestions?

    iPad2... after synch with my Mac, I now have numerous duplicates of the same PDF files in Books.  Can't select them to delete them.  Can't move them.  Any suggestions?
    <Email Edited by Host>

    Hi sdfulbright,
    Open iTunes, and under View, select "Show Sidebar". The old sidebar you are used to will show up, and everything will work the way it did under the old iTunes.
    Hope this helps!
    Cheers,
    GB

  • Standard SAP program name for the data extraction

    Please tell me the stadard SAP program  for the data extraction for Material, Vendor and Customer.

    you might want to explore tx. SXDA.

  • HT5636 I was typing in a word for Mac document and I hit the apple key and the numeral 8 at the same time now all of my documents have these strange symbols please help

    I was typing in a word for Mac document and I hit the apple key and the numeral 8 at the same time now all of my documents have these strange symbols please help

    Simply type command 8 again. That toggles the "show paragraphs" function.

  • Change pointers for the ZSEGMENT of IDOC Extension.

    Hello Experts,
    We are working on the SAP version ECC 5.0.
    Our requirement is creating the ZZField and use this field to interface with legacy systems in the trnx FD02 and table KNB1.
    We have created the ZZField in table KNB1 and also ZSEGMENT for the IDOC DEBMAS06.
    We want to add the IDOC change pointers proramme for this ZSEGMENT that is being created.
    I know there are two methods of doing this:
    OLD METHOD:USER EXIT....
    NEW METHOD:CALL CUSTOMER FUNCTION'...'
    I tried the old method with the user EXIT_SAPLVV01_0001 for the Cutomer master.
    But I am getting the error as
    PROGRAMME NAMES zx....ARE PRESERVED FOR THE INCLUDES OF EXIT FUNCTION GROUPS.
    Can any one tell me how do i need to write the programme for the IDOC CHANGE POINTERS for the ZSEGMENT?
    Thank you.

    Our requirement is creating the ZZField and use this field to interface with legacy systems in the trnx FD02 and table KNB1.
    We have created the ZZField in table KNB1 and also ZSEGMENT for the IDOC DEBMAS06.
    in the above question watr the fields ur going to populate in KNB1 TABLE or in ZSEGMENT FOR DEBMAS06.
    CAN U PL GUIDE ME..
    thanking u...
    ajay

  • How the data extraction happens from HR datasources from R/3 to BW system.

    Hello All
    How the data extraction happens from HR datasources from R/3 to BW system.Incase of delta records ( for CATS datasources ) ,Is there any flow like LO .
    Incase of Full and delta loads how does the data will be taken from R/3 to BW,DO we need to fill setup tables ?
    Searched forum but couldnt able to find the relevant one.
    Thankyou
    Shankar

    Hi Shankar.
    HR Datasources do not have setup tables . Though before implementation, certain customizations should be done and the delta loads have dependency on other data sources. Also you must have implemented Support Package SAPKH46C32, or have made the relevant corrections in SAP Note 509592.
    Follow this link for details on customization and dependencies for all CATS datasources.
    http://help.sap.com/saphelp_nw70/helpdata/en/86/1f5f3c0fdea575e10000000a114084/frameset.htm
    Regards,
    Swati

  • Any ideas on why the numerical keypad on the far right isn't working?

    Any ideas on why the numerical keypad on the far right isn't working?
    I am running Windows Vista Business with ALL of the latest M$ updates.
    I am running have updated ALL of Apple's updates also.
    I can't get the numerical keypad to work. All of the other keys on the main keyboard work perfect.
    TIA,
    -Apple //GS

    Hi,
    what Apple keyboard do you use ?
    Usually the Num-Lock function is enabled using the 'Clear'-key (directly above the '7'-key on the numpad).
    See here: http://support.apple.com/kb/HT1167
    Regards
    Stefan

Maybe you are looking for