NW 7.3 + iView from remote source wizard + R3 Web Dynpro ABAP, not working
Hi,
I think this forum is my last resort.
I'm running NetWeaver 7.3 Enterprise Portal and also have an existing ECC6 on backend.
Our ABAP Programmer has built some WD4A application on ECC, I'd like to made them available
on EP as ABAP WebDynpro iView.
From the document, I know the way to create ABAP WD iView is different since 7.3. I have to use "iView from remote source" to do it.
On EP side, I have made an system alias (test ok) for ECC, assigned permission, provide mapping id/pwd, and test.
On ABAP side, all webdynpro app are activated (T-code sicf, /sap/bc/webdynpro, /sap/public/bc/webdynpro...). I can even test WAS by bringing up browser and access some sample ABAP webdynpro .
However, I cannot success on "iView from remote source" wizard and it always show me "Nothing found. Check your search Criteria.". Eventhough I use "*" as search criteria.
Anyone has the similar situation ? I even doubt that it is a placeholder of a feature , not working for now. Anyone made it work on NW 7.3 ?
More detail:
My System Alias for ECC:
Application Host: myr3.mydomain.com
SAP Client: 600
SAP System ID: DEV
SAP System Number: 00
Server Port: <leave it blank>
System Type: SAP_R3
Logon Method: UIDPW
User Mapping Type: admin,user
ICM Host: myr3.mydomain.com:8000
ICM Protocol: http
ICM URL prefix: <leave it blank>
SAP Netweaver AS Description: <leave it blank>
All other fileds are leave it as default value
I also assign a group to have "read" and "user" permission to this system
Also assign Alias to the system.
I also create a user belong to the group, assign his system mapping an ECC user ID & PWD to it.
I tested the System alias, it is working (both WEB AS test, and R3 test)
Then I try to create an iView on EP, under a PCD folder , new->iview->iview from remote source. A wizard show up. Then I can select the ECC alias just created, and provide * as application search criteria, and then select "WEB DYNPRO ABAP" as the application type. Then "GO"
as I mentioned, it always show "Nothing Found. Check your search crieteria"
But I'm sure the web dynpro applications are activated on R3.
OK, that's it, please help this one. Thanks
IF YOU DID MAKE IT WORK ON YOUR NW 7.3, PLEASE DROP A LINE HERE SO I KNOW IT IS MY OWN PROBLEM !!!
Edited by: Wilson KU on Nov 14, 2011 10:42 AM
Edited by: Wilson KU on Nov 14, 2011 10:46 AM
Thanks for the reply,
[About Backend]
I feel confident about the backend R3 system because I can use the WAS URL to access the sample WD4A application, for example, I can bring up the wd4a application ui in my browser. It is purely browser and R3 stuff, no EP involved.
http://soeprdev.mydomain.com:8000/sap/bc/webdynpro/bobf/demo_sales_order?sap-client=600&sap-language=ZF
I also already activate all nodes and sub-nodes (in SICF Services) under /sap/bc/webdynpro as well as /sap/public/bc/webdynpro. (and some other nodes to make icon and include work)
[About the system object in EP]
I have done all kind of test on the system object (alias):
1. In EP System Administration -> Landscape Configuration, I select the system object, click "Test Connection", It shows me a Check mark, and the detail message is SOE_DEV_600 connection
2. Edit the System object, then click on "Connection Tests" page, I see two lines there, check both and click test, here is the result:
SAP Web AS Connection:
: Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check if the system can be retrieved
3. Check if the system object has a valid system alias
4. Check if an SAP system is defined in the system object
5. Validate the following parameters: Web AS protocol; Web AS hostname
6. Checks if the host name of the server can be resolved.
7. Pings the Web AS Ping service (works only if the service is activated on the Web AS, and only on ABAP Web AS)
8. Check HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. System retrieved successfully
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ICM Protocol (http) ICM Host Name (soeprdev.mydomain.com:8000)
6. The host name (soeprdev.mydomain.com) was resolved successfully
7. The Web AS ping service http://soeprdev.mydomain.com:8000/sap/bc/ping was pinged successfully
8. An HTTP/S connection to http://soeprdev.mydomain.com:8000 was obtained successfully.
Connection Test for Connectors:
: Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection successful
Similar Messages
-
Submit button from Interactive adobe form in Web Dynpro ABAP
Hi all,
We seem to be having a problem with the 'submit' button on the Interactive Form for the Web Dynpro ABAP. The submit button is from the Web Dynpro active X or web Dynpro Native in the form designer. The submit button doesn't trigger the action in Web Dynpro. we are currently running on support pack 9 for the ABAP stack. We have Internet Explorer browser version 6. Could someone tell me if there are requirements for the IE version that will work in conjunction with a particular ABAP stack version. And, are there specific IE security settings or administrative privilages required with this version of the ABAP stack. Or, any other ideas as to why this does not seem to work.
Thanks in advance,
Michelle HongHi Michelle,
Could you tell me how you resolved the problem - as I'm facing exactly the same issue!
Many Thanks
Christine -
Trigerring BPM from Web Dynpro screen not working
Hi Guys,
I am trying to trigger a BPM process from a Web Dynpro screen so I created a BPM process and created a WSDL and consuming the WSDL in the Web Dynpro app but getting an exception "Exception on creation of service metadata for web service mass config parameters service reference ID '28af57ab-9212-4ffd-90c6-0779c78a8da3' and application name 'demo.sap.com/testwd'. Check mass configuration has been done properly."
Please assist with what I am missing.
Thanks,
-AshI ran into the same error when attempting to consume a Process as a web service from my Web Dynpro component. I found that it is actually succeeding in kicking off my process, but it looks like it fails from my calling component. It seems to be related to calling a service meant to be asynchronous as a synchronous service. In my case, it throws a SOAP fault "com.sap.engine.services.webservices.jaxrpc.exceptions.SOAPFaultException: Process start has been triggered" when I run it from the WS Navigator manually. It turns out that the same error is getting wrapped by the exception you were experiencing. Try using the getCause method to see if the same is true for you. This environment is still new to me so I don't have good solution on how to make it not throw that error in the first place.
[addendum] I ran across [this|Start BPM Process Trigger - Read timed out] thread that explains exactly what I had guessed. You can remove the response part of your WSDL and it will get called successfully in an asynchronous manor. Note that you must manually remove some of the entries in the WSDL since the visual editor with the 7.1 environment doesn't clean up after itself as well as it should.
Edited by: Joseph Robertson on Jan 12, 2011 11:04 PM -
Transaction iView(from remote source) does not open a new SAP session
Hi All,
We are on portal 7.4 and are calling a transaction from ECC system. Within the transaction we have a button which displays graphs based on the output of the transaction. Since we are calling this transaction from portal, a new session does not open after clicking on this button.
In order to enable a new session, I have changed the configuration for 'disable new session buttons in SAP GUI' to false yet the new SAP session does not open. I have also verified the webgui setting and ensured that we do not have '~singletransaction' maintained, yet we are unable to enable the new session. Could you kindly suggest on how I can get this button to function?
Additional inputs:
- Referred to note 125814 for changing the new sessions value.
- Tried changing the iview type to 'SAP GUI for window' from SAP HTML type(which was default).
- In case I type '/o' in the command box for SAP, it gives me a 'maximum sessions reached' message, but this message does not come when I click on this button. In fact, nothing happens after I click on the button.
I still think there might be a possibility to enable this, however, I seek your inputs on this.
Awaiting response...
Warm Regards,
VinayHi Harini,
thanks for your answer!
I can tell you that the same command used from the SAP Client open a new session with the same transaction...
Is strange that from the portal it has a different behaviour...
Best Regards -
Portal dynamic iView from Web Dynpro ABAP?
I wish to use a "Dynamic iView" from a Web Dynpro ABAP application, but it appears the API is only available in Web Dynpro Java. Can this feature be used from Web Dynpro ABAP, or can this be accomplished in another way?
Scenario: I have two iViews on a page, one Web Dynpro ABAP and another iView whose source I want to change dynamically based on something a user clicks in the Web Dynpro ABAP.
Dynamic iView:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/a72c155df77038e10000000a422035/frameset.htmSo you are suggesting the WDA fires an event to a new WDJ that we would need to create that would in turn use the Dynamic iView service mentioned in that help document?
-
Web Dynpro Java timesheet to Web Dynpro ABAP timesheet what changes needs to be done from EP side
Hi All,
We are moving Web Dynpro Java timesheet to Web Dynpro ABAP timesheet.
what changes needs to be done from EP side?
I have made Web Dynpro ABAP iView calling Web Dynpro ABAP timesheet and linked it with page.
But It is showing an error 'Web Dynpro Application CATDATARECORD does not exist'.
Please suggest what other changes needs to be done.Hi Anurag,
I have added new Web Dynpro ABAP iView to the same page in which Web Dynpro JAVA iview was added and made ABAP iview visible.
And this page is already assigned to role.
How should I link this ABAP iview so that it get replace by the Web Dynpro JAVA iview.
And the application name (CATDATARECORD) is correct and Web Dynpro JAVA is using the same application.
But now we want new time timesheet for that what changes needs to be done?
Please suggest. -
Web dynpro Abap Iview Urgent ****
Hi,
I am having a web dynpro abap application with some two application parameters passed to it. By default end user will be calling the application using url and pass the application parameter
http://XXX/XXX/XX/Application?parmeter1=value1&parmeter1=value1sap-system-login-basic_auth=X&sap-client=000&sap-language=EN
It works correctly. Now we want to create an iview in portal for this application and my need is to
get the url of the ivew so that the end user can call the url of the iview and pass application parameter to the url directly as of a web dynpro application.
How to get the url for the iview developed and pass application parameter to Web dynpro
RKHi Ameya,
I think you have misunderstood my issue. Let me explain the issue from first. I have a Web dynpro abap application with 2 application parameter.I used to pass value to this application parameter throgh the url of web dynpro abap. Its going to be a dynamic value not a static value passed to application parameter.
Now we are creating a Portal Webdynpro Iview. here i can specify a static one time value to application parameter of my web dynpro abap application. But my need is the application parameter should have a different values. So what i am asking "Is it possible to call the Portal iview directly and pass parameter to the application parameter of web dynpro abap".
With regards,
Arjun Sekar -
I can receive emails, but I cannot send emails. This just started happening. I have an iPhone and I can send emails from my phone fine. It's just not working on my Macbook. Every time I try to send an email it goes straight to my outbox. Can anyone help?
Thank you for heading me in the right direction. I reset my Mail account for Outgoing Mail Server to outbound.att.net:(customer ID)@att.net (instead of smtp.att.yahoo.com, per Apple's online troubleshooting information). I'm not sure what "(Offline)" means when it appears at the end of my Outgoing Mail Server (SMTP)?? In the Advanced box I clicked on "Use custom port: 465" and checked "Use Secure Sockets Layer." Authentication: Password; I have correct User Name and Password put in. After doing all this, when I try to send emails again today, they go directly to the Outbox and sit there.
What's curious is that my first sent email this morning did go out using the Outgoing Mail Server, smtp.att.yahoo.com: (customer ID)@att.net(Offline) but subsequent emails I tried to send with this server were rejected with the message: "Cannot send message using the server smtp.att.yahoo.com (etc.). The SMTP server doesn't support TLS(SSL) on port 587. Verify your account settings and try again." That's when I tried resetting my Outgoing Mail Server to outbound.att.net (etc.), as mentioned above, and was unsuccessful in sending out any further emails. I guess my next step is to contact my email service provider, AT&T, and see if they can help me. Thanks, again, for taking the time to respond and for giving me your input! Much appreciated! -
Delete a file from the KM in a Web Dynpro application
Hello,
We need to delete a file from the KM in a Web Dynpro application.
We have a file name (filename.txt) and its path (/documents/Test/), how can we completely delete the file from the KM?
Thanks,
GilHi venkata reddy,
You wrongly mentioned system admin instead of content admin
Go to Content administration not in the system administration
if u delete the file manually in the portal you can go with
go to Content administration -> KM Content -> go to Particular document -> just tick the check box which doc u want delete -> go to selection -> u will find delete .
Regards,
P.Manivannan -
How do I move aiff files from the viewer to the timeline-it is not working when I click and drag or when I try to move the files to the overwrite or insert buttons-Thanks.
hi
You cannot move audio from the viewer
Mark your in and out points then in the browser grab hold of the audio tracks icon and drag that to the time line
PJ -
How can I call a java object from Web dynpro ABAP application?
I made Web dynpro ABAP application and posted it to SAP EP.
For certain business purpose, we need to call external 3rd party java object using 3rd party's java api in Web dynpro application.
Is there anybody who experienced this kind of java interface issue?
I know Web dynpro Java environment can fully support this kind of requirement. but regarding Web dynpro ABAP, I couldn't find any clue for this.
Any comment or suggestion would be greatly appreciated.
Thanks,
Raymond, ABAP Consultantif you have jco configured, then you can make calls to java api from ABAP .
check out this weblog.
/people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
Raja -
Import data from excel/csv file in web dynpro
Hi All,
I need to populate a WD table by first importing a excel/CSV file thru web dynpro screen and then reading thru the file.Am using FileUpload element from NW04s.
How can I read/import data from excel / csv file in web dynpro table context?
Any help is appreciated.
Thanks a lot
AakashHi,
Here are the basic steps needed to read data from excel spreadsheet using the Java Excel API(jExcel API).
jExcel API can read a spreadsheet from a file stored on the local file system or from some input stream, ideally the following should be the steps while reading:
Create a workbook from a file on the local file system, as illustrated in the following code fragment:
import java.io.File;
import java.util.Date;
import jxl.*;
Workbook workbook = Workbook.getWorkbook(new File("test.xls"));
On getting access to the worksheet, once can use the following code piece to access individual sheets. These are zero indexed - the first sheet being 0, the second sheet being 1, and so on. (You can also use the API to retrieve a sheet by name).
Sheet sheet = workbook.getSheet(0);
After getting the sheet, you can retrieve the cell's contents as a string by using the convenience method getContents(). In the example code below, A1 is a text cell, B2 is numerical value and C2 is a date. The contents of these cells may be accessed as follows
Cell a1 = sheet.getCell(0,0);
Cell b2 = sheet.getCell(1,1);
Cell c2 = sheet.getCell(2,1);
String a1 = a1.getContents();
String b2 = b2.getContents();
String c2 = c2.getContents();
// perform operations on strings
However in case we need to access the cell's contents as the exact data type ie. as a numerical value or as a date, then the retrieved Cell must be cast to the correct type and the appropriate methods called. The code piece given below illustrates how JExcelApi may be used to retrieve a genuine java double and java.util.Date object from an Excel spreadsheet. For completeness the label is also cast to it's correct type. The code snippet also illustrates how to verify that cell is of the expected type - this can be useful when performing validations on the spreadsheet for presence of correct datatypes in the spreadsheet.
String a1 = null;
Double b2 = 0;
Date c2 = null;
Cell a1 = sheet.getCell(0,0);
Cell b2 = sheet.getCell(1,1);
Cell c2 = sheet.getCell(2,1);
if (a1.getType() == CellType.LABEL)
LabelCell lc = (LabelCell) a1;
stringa1 = lc.getString();
if (b2.getType() == CellType.NUMBER)
NumberCell nc = (NumberCell) b2;
numberb2 = nc.getValue();
if (c2.getType() == CellType.DATE)
DateCell dc = (DateCell) c2;
datec2 = dc.getDate();
// operate on dates and doubles
It is recommended to, use the close() method (as in the code piece below) when you are done with processing all the cells.This frees up any allocated memory used when reading spreadsheets and is particularly important when reading large spreadsheets.
// Finished - close the workbook and free up memory
workbook.close();
The API class files are availble in the 'jxl.jar', which is available for download.
Regards
Raghu -
Conversion from SAP R/3 system to web dynpro abap.
hi,
Can anybody provide me with information on what all objects can be converted from an SAP R/3 system to a web dynpro ABAP application, nd hw??.Hi Girish,
I don't understand your question completely. Is your question related to the Internet Transaction Server? If it is a Web Dynpro question, I can move this thread to the Web Dynpro forum. What do you think?
- Henning -
Adding attachments to workflow from Web Dynpro ABAP Application program.
Hi,
workflow is supposed to start by a Web Dynpro ABAP Application.
The user can attach files to it.
A superior is supposed to review the files and either approve or reject the request.
I tried the following in Web Ddynpro ABAP:
CALL FUNCTION 'EWW_WORKFLOW_START'
EXPORTING
X_TASK = 'WS90000074'
IMPORTING
Y_WORKFLOW_ID = lv_WF_ID
TABLES
X_CONTAINER = lv_IT_CONTAINER
EXCEPTIONS
then followed by:
CALL FUNCTION 'SAP_WAPI_ATTACHMENT_ADD'
EXPORTING
WORKITEM_ID = lv_wf_id
ATT_HEADER = lv_swr_att_header
ATT_BIN = Item_FILENAMEATTACHED
DOCUMENT_OWNER = SY-UNAME
LANGUAGE = SY-LANGU
IMPORTING
ATT_ID = lv_swr_att_id
The Workflow has only one user decision step and one notification Step.
In the user decision step, there is a binding from ATTACHOBJECTS to the task.
But, in the log, you can see the attachment in the Workflow Container of the workflow instance, but you don't see it in the task (neither Inbox nor UWL)
I have checked the binding it is correct. I am getting the attachment in workflow container in '_attach_objects' element. but this attachment has to go to the user decision step, so I am binding the '_attach_objects' of workflow container to '_attach_objects' of user decision step. But the attachment was not going to user decision step.
Could you please let me know where am i doing wrong?
Thanks,
V.Nagaraju@Ruslim Chang
Sorry to point out but the FM will return the Workitem ID only so there is no problem with the LV_WF_ID variable.
@vundralla nagaraju
Instead of making binding between attachobjects make binding between
WiGroup_ID <---- attachobjects
and then on the next step you try to make biniding in the user decision step by using WiGroup_ID.I think it should work. -
Face time from my IPhone 4s to iPad 2 is not working but Tango working.please help
Hi
After shifting to my new home, my face time from IPhone 4s to I pad 2 is not working, it shows the sign connecting .......... But never able to connect. On the other hand when I called other person it is working ? Please helpWhere did the photos on the iPhone come from? What is in Camera Roll on the iPhone?
Have you tried restarting or resetting your iPad and iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
No data will be lost.
Maybe you are looking for
-
Image Renditions not working in publishing site
Hi, I've through the process of getting image renditions working in my SharePoint farm. I have 2 WFEs and 2 Apps. Have enabled the blob cache in the web.config on all servers as detailed in TechNet and image renditions started to work. One day I noti
-
IBooks Author : How do I change background colour of a Chapter ?
iBooks Author : How do I change background colour of a Chapter e.g. Recipe Standard Template is Green I would like to change it to ... How do I do that ?
-
Multi-dimensional array with dynamic size - how to?
Hi I have a CONSTANT number of buckets. Each of them has to take a VARIOUS number of data series. The data series have one VARIOUS length per bucket. I'd like to index the buckets like an array to loop over them. So basically I need something like a
-
CCMS monitoring for SAPconnect based on Error Message Numbers
Hi, We are trying to use the CCMS monitoring to produce alerts for SAPconnect based specific Error Message Numbers for emails for example, however the monitoring function or data collection method for SAPconnect (BCOMAL_SXDS) does not provide that le
-
"Mini" windows (with small close/min/zoom buttons)
I'm overall extremely pleased with Leopard. One of the things that drives me CRAZY, however, is the inconsistent nature of windows made with Get Info (⌘I). Sometimes, it seems, this creates a normal window, so that when I type the keyboard command to