Conversion from SAP R/3 system to web dynpro abap.
hi,
Can anybody provide me with information on what all objects can be converted from an SAP R/3 system to a web dynpro ABAP application, nd hw??.
Hi Girish,
I don't understand your question completely. Is your question related to the Internet Transaction Server? If it is a Web Dynpro question, I can move this thread to the Web Dynpro forum. What do you think?
- Henning
Similar Messages
-
Not able to upload file in DMS(Document Mang. system) using Web dynpro ABAP
Hi All,
I am facing a problem while uploading the file into the DMS ( Document Management System ) from Webdnrpo .
I am using the BAPI - BAPI_DOCUMENT_CREATE2 to create the document .
CASE - 1
when i am providing the storage category mention below and no data carrier1
ls_documentfiles-storagecategory = 'ZHMEL_CS'. it is not able to upload the document in the DMS system and when i check
in the debugg mode it giving error as ""Error while checking in and storing: C:\TEST.TXT "" .
CASE - 2
When i am not using the storage category and providing the the data carrier as default
ls_documentdata-DATACARRIER1 = 'DEFAULT'. It is able to create the document in the DMS but i am not able to read that document .
I checked with DMS Consultant that DMS is configured for ZOL ( documenttype) with a storage category as 'ZHMEL_CS'.
The code which i have used is below :
ls_documentdata-documenttype = 'ZOL'.
ls_documentdata-documentversion = '00'.
ls_documentdata-documentpart = '000'.
ls_documentdata-description = 'Test Document'.
ls_documentdata-laboratory = '001'.
ls_documentdata-WSAPPLICATION1 = 'TXT'.
ls_documentdata-DOCFILE1 = 'C:\TEST.TXT'.
ls_documentdata-SAVEDOCFILE1 = 'C:\TEST.TXT'.
*ls_documentdata-FILESIZE1 = 000000000000.
*ls_documentdata-FILESIZE2 = 000000000000.
ls_documentdata-WSAPPLICATION1 = 'TXT'.
ls_documentfiles-DOCUMENTTYPE = 'ZOL'.
ls_documentfiles-DOCUMENTPART = '000'.
ls_documentfiles-DOCUMENTVERSION = '00'.
ls_documentfiles-storagecategory = 'ZHMEL_CS'.
ls_documentfiles-WSAPPLICATION = 'TXT'.
ls_documentfiles-DOCPATH = 'C:\'.""lv_filename.
ls_documentfiles-DOCFILE = 'TEST.TXT'."lv_filename.
ls_documentfiles-description = 'Test Document'.
ls_documentfiles-language = 'EN'.
ls_documentfiles-CHECKEDIN = 'X'.
APPEND ls_documentfiles to lt_documentfiles .
*&----Fill Descriptions
w_descr-language = 'EN'.
w_descr-language_iso = 'EN'.
w_descr-description = 'Test'.
append w_descr to lt_descr.
clear w_descr.
**w_hostname = 'HMEL-DV1R3_DR3_00'.
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
EXPORTING
documentdata = ls_documentdata
*hostname = 'content-srv'
*pf_http_dest = 'SAPHTTPA'
*pf_ftp_dest = 'SAPFTPA'
IMPORTING
DOCUMENTNUMBER = lv_DOCUMENTNUMBER
return = gv_return
TABLES
documentdescriptions = lt_descr
documentfiles = lt_documentfiles.
Please let me know your valuable inputs on the same ..
Edited by: Omm Awasthi on Dec 30, 2010 12:22 AM
Edited by: Omm Awasthi on Dec 30, 2010 12:25 AMHi omm , from functional side your require a document type and content repository
I have used below code in a function module to create document , we have create object link as PO to the doc.
FUNCTION ZFM_SR_CREATE_FROM_EXTERNAL .
""Local Interface:
*" IMPORTING
*" VALUE(IV_DOCUMENTNUMBER) TYPE DOKNR OPTIONAL
*" VALUE(IV_DOCUMENTTYPE) TYPE DOKAR OPTIONAL
*" VALUE(IV_DOCUMENTVERSION) TYPE DOKVR OPTIONAL
*" VALUE(IV_DOCUMENTPART) TYPE DOKTL_D OPTIONAL
*" VALUE(IV_STORAGE_CAT) TYPE CV_STORAGE_CAT OPTIONAL
*" VALUE(IV_DOKST) TYPE DOKST OPTIONAL
*" VALUE(IT_DM_FILES) TYPE ZDM_TT_FILES OPTIONAL
*" VALUE(IV_EBELN) TYPE EBELN
*" EXPORTING
*" VALUE(EV_DOCUMENTNUMBER) TYPE DOKNR
*" VALUE(ES_RETURN) TYPE BAPIRET2
V00.00 DD.MM.YYYY *
*********************New Method of Uploading File*********************************
CONSTANTS path_name TYPE dms_path
VALUE '/tmp/'.
CONSTANTS log TYPE dms_path VALUE '/tmp/logFO.txt'.
DATA: ls_draw TYPE bapi_doc_draw2,
lt_documentfiles TYPE TABLE OF bapi_doc_files2,
ls_documentfiles TYPE bapi_doc_files2,
ls_dm_files TYPE zdm_files,
lv_filename TYPE string,
lv_ext TYPE string,
lv_file_type TYPE draw-dappl,
lv_file_name TYPE dms_path,
lv_msg(80) TYPE c,
lt_objectlinks TYPE TABLE OF bapi_doc_drad,
ls_objectlinks TYPE bapi_doc_drad,
lv_ebelp TYPE ebelp
Prepare Data
MOVE iv_documentnumber TO ls_draw-documentnumber.
MOVE iv_documenttype TO ls_draw-documenttype.
MOVE iv_documentversion TO ls_draw-documentversion.
MOVE iv_documentpart TO ls_draw-documentpart.
ls_draw-statusextern = iv_dokst.
ls_draw-statusintern = iv_dokst.
ls_draw-username = sy-uname.
LOOP AT it_dm_files INTO ls_dm_files.
SPLIT ls_dm_files-filepath AT '.' INTO lv_filename lv_ext.
CALL FUNCTION 'CV120_DOC_GET_APPL'
EXPORTING
pf_file = ls_dm_files-filepath
IMPORTING
pfx_dappl = lv_file_type.
TRANSLATE lv_file_type TO UPPER CASE.
OPEN DATASET log FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
TRANSFER lv_ext TO log.
ls_documentfiles-wsapplication = lv_file_type.
TRANSLATE ls_documentfiles-wsapplication TO UPPER CASE.
CONCATENATE path_name
lv_filename
lv_ext
INTO lv_file_name.
CONDENSE lv_file_name NO-GAPS.
TRANSFER lv_file_name TO log.
OPEN DATASET lv_file_name FOR OUTPUT IN BINARY MODE MESSAGE lv_msg.
*Transfer Attachment Content to Application Server
TRANSFER ls_dm_files-content TO lv_file_name.
CLOSE DATASET lv_file_name.
TRANSFER 'move data to lt_files' TO log.
ls_documentfiles-storagecategory = iv_storage_cat.
ls_documentfiles-docfile = lv_file_name.
ls_documentfiles-DOCUMENTVERSION = IV_DOCUMENTVERSION.
APPEND ls_documentfiles TO lt_documentfiles.
CLEAR lv_file_name.
CLOSE DATASET log.
ENDLOOP.
IF iv_ebeln IS NOT INITIAL.
ls_objectlinks-objecttype = 'EKPO'.
SELECT SINGLE ebelp INTO lv_ebelp FROM ekpo WHERE
ebeln = iv_ebeln
AND loekz eq space.
CONCATENATE iv_ebeln lv_ebelp INTO ls_objectlinks-objectkey.
APPEND ls_objectlinks TO lt_objectlinks.
ENDIF.
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
EXPORTING
documentdata = ls_draw
pf_ftp_dest = 'SAPFTPA'
pf_http_dest = 'SAPHTTPA'
IMPORTING
documentnumber = ev_documentnumber
return = es_return
TABLES
objectlinks = lt_objectlinks
documentfiles = lt_documentfiles.
DATA: ls_doc_data type bapi_doc_draw2,
ls_doc_datax type bapi_doc_drawx2,
ls_return type bapiret2.
Set value for document data
ls_doc_data-statusextern = 'IW'.
ls_doc_data-statusintern = 'IW'.
Set value for document data check
ls_doc_datax-statusextern = 'X'.
ls_doc_datax-statusintern = 'X'.
CALL FUNCTION 'BAPI_DOCUMENT_CHANGE2'
EXPORTING
DOCUMENTTYPE = 'ROS'
DOCUMENTNUMBER = IV_DOCUMENTNUMBER
DOCUMENTPART = IV_DOCUMENTPART
DOCUMENTVERSION = IV_DOCUMENTVERSION
DOCUMENTDATA = ls_doc_data
DOCUMENTDATAX = ls_doc_datax
HOSTNAME =
DOCBOMCHANGENUMBER =
DOCBOMVALIDFROM =
DOCBOMREVISIONLEVEL =
SENDCOMPLETEBOM = ' '
pf_ftp_dest = 'SAPFTPA'
pf_http_dest = 'SAPHTTPA'
CAD_MODE = ' '
ACCEPT_EMPTY_BOM = ' '
IMPORTING
RETURN = ls_return
TABLES
CHARACTERISTICVALUES =
CLASSALLOCATIONS =
DOCUMENTDESCRIPTIONS =
OBJECTLINKS =
DOCUMENTSTRUCTURE =
DOCUMENTFILES = lt_documentfiles.
LONGTEXTS =
COMPONENTS =
move es_return to ES_RETURN.
IF es_return-type CA 'EA' ."NE 'E' AND es_return-type NE 'A'.
"do nothing
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDIF.
LOOP AT lt_documentfiles INTO ls_documentfiles.
DELETE DATASET ls_documentfiles-docfile.
ENDLOOP.
ENDFUNCTION. -
Web dynpro Abap Iview Urgent ****
Hi,
I am having a web dynpro abap application with some two application parameters passed to it. By default end user will be calling the application using url and pass the application parameter
http://XXX/XXX/XX/Application?parmeter1=value1&parmeter1=value1sap-system-login-basic_auth=X&sap-client=000&sap-language=EN
It works correctly. Now we want to create an iview in portal for this application and my need is to
get the url of the ivew so that the end user can call the url of the iview and pass application parameter to the url directly as of a web dynpro application.
How to get the url for the iview developed and pass application parameter to Web dynpro
RKHi Ameya,
I think you have misunderstood my issue. Let me explain the issue from first. I have a Web dynpro abap application with 2 application parameter.I used to pass value to this application parameter throgh the url of web dynpro abap. Its going to be a dynamic value not a static value passed to application parameter.
Now we are creating a Portal Webdynpro Iview. here i can specify a static one time value to application parameter of my web dynpro abap application. But my need is the application parameter should have a different values. So what i am asking "Is it possible to call the Portal iview directly and pass parameter to the application parameter of web dynpro abap".
With regards,
Arjun Sekar -
Reading HTML Content using Web Dynpro ABAP
Hello,
I was wondering if it is possible to read the content (HTML) behind a given URL using Web Dynpro ABAP. If so, are there any functions available to parse the HTML ? I have been asked to develop an application that requires going to a URL, reading the content, and formatting a table from that content for presentaion within Web Dynpro ABAP. The HTML of the URL is nothing more than a "Table of Contents" to existing documentation ( Word Documents )
Thank you for any help / advice you can provide
LarryYou can get the HTML returned in a table using fm RSFO_HTML_REQUEST2.
Once you have that, you can convert it to a string using any number of methods. CL_RSR_WWW_RENDERER=>TABLE_TO_STRING should work fine.
One option for parsing it would be to get it converted into an iXML object, but you might have to do quite a bit of manipulation first depending on what the html looks like. You can see more info here on iXML classes: [http://help.sap.com/saphelp_nw04/helpdata/de/86/8280ba12d511d5991b00508b6b8b11/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/de/86/8280ba12d511d5991b00508b6b8b11/frameset.htm]
Otherwise I would just make use of find statements with regex patterns to sort through the html. -
SAP GUI call from Web Dynpro Abap
Hi all,
I heard about the possibility to call the SAP GUI directly from my Web Dynpro Abap Application, so that the GUI is integrated in my web browser. But i could not find any information about that.
Maybe you can help me.
Thanks,
JohannesHi Johannes,
Its not possible to directly call your R/3 GUI from your WDA. You can try the "Screen Design Time Conversion" tool in SAP. You can go through this [link|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/30/f2156a26fb4b4d86c5b0ce9f86bfb3/frameset.htm] for further details regarding it.
But please also pay heed to Thomas's advise in [here|Is there a converter for classic dynpros?;.
Regards,
Uday -
Unable to import idoc into PI 7.0 system from SAP r/3 system
Hi Experts,
I am getting an error while importing an Idoc structure from SAP r/3 system. The error says "unable to read Idoc segments". The Idoc has recently undergone changes. When We are looking at the struture of idoc through IDOCSYN table it is showing updated structure in SAP R/3 system but import to SAP XI is failing.
Can you suggest some way to tackle this kind of problem.
regards
AnupamHi Francis,
This was indeed an authorization issue. Thank you so much for your valuable suggestion. The user lacked proper authorization to import the idocs.
Hi All,
Thank you for all your support.
Regards
Anupam -
Connection from SAP to our systems involving 2 saprouters
connection from SAP to our systems involving 2 saprouters
we have 1 saprouter inside a dmz and another for connecting to our systems.
we are guessing that this is possible
SAP (sapserv2) -
SNC----> saprouter1 (DMZ, SNC connection) -
> saprouter2 (P * * 3200) ---> SAP1, SAP2...
But how could we do that?
How can we let SAP know that they need to connect to 2 saprouters instead of 1?
The "Mantain System Data" in sap service marketplace only lets us introduce 1 saprouter.
And how should be the saproutettab of the 2 saprouters?
saprouter1:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 000.00.00.00 *
P * saprouter2 3299
saprouter2:
P * * 3200
P * * 3600
is that possible?
Many thanks !!Hi
As far as my experience goes with this you have to maintain both router information in oss1 tcode
Also mention second router on the second router tab on the SMP data
I hope it should work with that as it will automatically create router table -
How to extract Inventory data from SAP R/3 system
Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?
Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK -
How to load master data from SAP R/3 system like Customer master, materioal master , vendor master.............
Hi Bramha,
Check ...........
Re: master data loading in BI 7.0
/message/4708129#4708129 [original link is broken]
Re: Master data loading.
Regards,
Vijay. -
Is it possible to read Idocs from SAP R/3 System?
Is it possible to read Idocs from SAP R/3 System? Instead of the aRFC
Unless Hydra emulates ECC sending IDOCS, then you just might want to use the WSMessageListener (http://help.sap.com/saphelp_xmii120/helpdata/en/45/6a86ac88130dece10000000a11466f/frameset.htm) and configure your message processing rules accordingly.
-
Tools available to extract documents from SAP document management system
Hi ,
Can anybody provide some valid information on
Tools available to extract the documents and their associated meta data from SAP Document Management system and DIR (Document Information Record) to non SAP document management sysyem ?
Thanks..Hi,
On ALE / EDI interface, you can use Message DOCMAS for triggering the outbound IDocs, you can use Program: RBDSEDOC
For ALE / EDI Configuration, you can refer the book by Arvand Nagpal which is a step by step guide.
Hope this helps.
Best Regards, Murugesh AS -
Export data from SAP Document Management System to File System(FileStore)
Hi,
We need to extract/ export data (documents and metadata) from SAP Document Management System to windows File System (File Store), can anyone suggest us tool or methodology to do the same.
Thanks,
NileshI'm also looking for a solution for this problem. We are capturing comments in BW-BPS layouts. They get stored in BW's document management system and we would like to export them out of the system for external reporting into an ACCESS database.
-
Web Dynpro ABAP in SAP E-Recruiting
Hi,
We just imported SP8 for our SAP E-Recruiting 6.0. SP8 offers Web Dynpro ABAP as candidate UI. One question we have is how WD pages incorporated for recruiters who still use BSP pages. For example, when a recruiter logs into E-Recruiting and finds a specific candidate, he/she can click on "Candidate Profile" to get to that candidate's pages. In BSP technology, recruiter actually uses exactly the same pages that candidate uses for Work Experience, Education, etc.. With candidate UI using WD technology, does recruiter use the same WD pages when displaying candidate profile information? I have been searching all the possible places, such as IMG, SICF, in order find a spot so that I can set the switch on, but so far unsuccessful.
Any help is greatly appreciated.
LiHi Li ,
At best of my understanding in WD ABAP , its possible to make one WebDynpro page serving same purpose ( showing profile deatils ) visible for manty( Candidate , as well as Recruiter ) ....
I would like to know what exactly you want from web Dynpro ..then I will be in better position to tell you.
FYI ...
1) Web Dynpro ABAP
As the name suggests Web Dynpro for ABAP uses exactly the same meta model as its cousin Web Dynpro for Java. A Web Dynpro component, a Web Dynpro view, a Web Dynpro model, a Web Dynpro controller have the same semantics both for ABAP and Java. The main difference is the designtime environment, the development infrastructure and the runtime environment.
The designtime environment is properly embedded in the ABAP Workbench where Web Dynpro artifacts are simply a new category like BSP applications or classical dynpro based applications before. Also no surprises regarding the development infrastructure. The correction and transport system keeps track on all changes that are done, versions them and helps to propagate the Web Dynpro application from development to production like you would do with ordinary BSP or dynpro-based applications.
Last not least the execution platform is the ABAP server that produces application content ready to be integrated in the NetWeaver Portal seamlessly. Features like portal eventing can be used between applications written in ABAP or applications developed with Java.
2 ) I can give you links that can help you a lot.
First of all start doing SAP SDN tutorials .
Create some compenents with BAPI , Component usage and ALV .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
Try to Download demo tutorials from SDN library & Try to search WebDynpro ABAP WebLogs .
Wait not just that SAP has provided you with ample demo example of WD ABAP already bundled with SAP . Just Try out Components starting with WDR . I can tell you few like WDR_TEST_EVENTS ( It shows how every UI elments to use )
See packages like SWDP_DEMO , SALV_WD_DEMO
there are many more .
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
The specified item was not found.
Cheers
Parry -
NW 7.3 + iView from remote source wizard + R3 Web Dynpro ABAP, not working
Hi,
I think this forum is my last resort.
I'm running NetWeaver 7.3 Enterprise Portal and also have an existing ECC6 on backend.
Our ABAP Programmer has built some WD4A application on ECC, I'd like to made them available
on EP as ABAP WebDynpro iView.
From the document, I know the way to create ABAP WD iView is different since 7.3. I have to use "iView from remote source" to do it.
On EP side, I have made an system alias (test ok) for ECC, assigned permission, provide mapping id/pwd, and test.
On ABAP side, all webdynpro app are activated (T-code sicf, /sap/bc/webdynpro, /sap/public/bc/webdynpro...). I can even test WAS by bringing up browser and access some sample ABAP webdynpro .
However, I cannot success on "iView from remote source" wizard and it always show me "Nothing found. Check your search Criteria.". Eventhough I use "*" as search criteria.
Anyone has the similar situation ? I even doubt that it is a placeholder of a feature , not working for now. Anyone made it work on NW 7.3 ?
More detail:
My System Alias for ECC:
Application Host: myr3.mydomain.com
SAP Client: 600
SAP System ID: DEV
SAP System Number: 00
Server Port: <leave it blank>
System Type: SAP_R3
Logon Method: UIDPW
User Mapping Type: admin,user
ICM Host: myr3.mydomain.com:8000
ICM Protocol: http
ICM URL prefix: <leave it blank>
SAP Netweaver AS Description: <leave it blank>
All other fileds are leave it as default value
I also assign a group to have "read" and "user" permission to this system
Also assign Alias to the system.
I also create a user belong to the group, assign his system mapping an ECC user ID & PWD to it.
I tested the System alias, it is working (both WEB AS test, and R3 test)
Then I try to create an iView on EP, under a PCD folder , new->iview->iview from remote source. A wizard show up. Then I can select the ECC alias just created, and provide * as application search criteria, and then select "WEB DYNPRO ABAP" as the application type. Then "GO"
as I mentioned, it always show "Nothing Found. Check your search crieteria"
But I'm sure the web dynpro applications are activated on R3.
OK, that's it, please help this one. Thanks
IF YOU DID MAKE IT WORK ON YOUR NW 7.3, PLEASE DROP A LINE HERE SO I KNOW IT IS MY OWN PROBLEM !!!
Edited by: Wilson KU on Nov 14, 2011 10:42 AM
Edited by: Wilson KU on Nov 14, 2011 10:46 AMThanks for the reply,
[About Backend]
I feel confident about the backend R3 system because I can use the WAS URL to access the sample WD4A application, for example, I can bring up the wd4a application ui in my browser. It is purely browser and R3 stuff, no EP involved.
http://soeprdev.mydomain.com:8000/sap/bc/webdynpro/bobf/demo_sales_order?sap-client=600&sap-language=ZF
I also already activate all nodes and sub-nodes (in SICF Services) under /sap/bc/webdynpro as well as /sap/public/bc/webdynpro. (and some other nodes to make icon and include work)
[About the system object in EP]
I have done all kind of test on the system object (alias):
1. In EP System Administration -> Landscape Configuration, I select the system object, click "Test Connection", It shows me a Check mark, and the detail message is SOE_DEV_600 connection
2. Edit the System object, then click on "Connection Tests" page, I see two lines there, check both and click test, here is the result:
SAP Web AS Connection:
: Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check if the system can be retrieved
3. Check if the system object has a valid system alias
4. Check if an SAP system is defined in the system object
5. Validate the following parameters: Web AS protocol; Web AS hostname
6. Checks if the host name of the server can be resolved.
7. Pings the Web AS Ping service (works only if the service is activated on the Web AS, and only on ABAP Web AS)
8. Check HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. System retrieved successfully
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ICM Protocol (http) ICM Host Name (soeprdev.mydomain.com:8000)
6. The host name (soeprdev.mydomain.com) was resolved successfully
7. The Web AS ping service http://soeprdev.mydomain.com:8000/sap/bc/ping was pinged successfully
8. An HTTP/S connection to http://soeprdev.mydomain.com:8000 was obtained successfully.
Connection Test for Connectors:
: Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the back-end application using the connector defined in this system object
Results
Default alias retrieved successfully
Connection successful -
Technical System of Web AS ABAP
hi all,
i have following doubts when creating technical system of web as ABAP type.
1)when creating techincal system it is asking me for
' Message Port (sapmsXXX): '. what should i enter for this field and wheredo i get the details from. by default it is taking 3600 is it ok if i go ahead with 3600.
2) logical system name .it appears it is optional but should i fill this entry as well.
3) After creating the technical system. do i need to fill TMS Domain and TMS Transport Group Name. if yes how do i need to fill and and what is the use of this field.
can some one suggest me a blog for Technical System creation for web as abap type.
thanks,
rajHi,
you can do it automatically
check out my weblog:
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
or you can find how to do it
(in more details) in my book too:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>
Maybe you are looking for
-
Attributes passed in HTTP Header but not received in my application!! Help
Hi all, I am running Sun Directory Server 5.2, Access Manager 7.0 and Policy Agent 2.1 on an IBM Websphere 5.0 web server. I am using a "shared" authorization model where I am using the AM only for the authentication part. The way my application is s
-
Hi All, Did anybody use the RowRepeater UI Element? I don't understend how to use it? There is some documentation for this element <a href="http://aiokeh.wdf.sap.corp:1080/SAPIKS2/navTreeClose.sap?_SCLASS=IWB_STRUCT&_SLOIO=7C3545415EA6F523E10000000A
-
Weblogic 10.3 ldap provider configuration
Hello, I am trying to configure Weblogic 10.3 to use an LDAP authentication provider. I can see my list of Users from the ldap server, but I can not see the list of Groups. Any help with my config would be appreciated. I turned on debug for DebugSecu
-
bought this phone long ago and take it to a place to set it up both security and iclouds, now i dont have access to this phone anymore and i took it to him, he said i would have wrote it down then and he don't even usersname and password for both sto
-
Songs play on supposedly-unauthorised device
I have the usual double identity problem. But I'm not having a problem I should be having and I don't understand why not. The desktop has downloaded all the music on one account - let's call it A. The only authorised device on this account (I've just