NWDI - How to control EAR deployment order

We are developing a custom application in NWDI. We have created a software component for the this and have created all required DCs under this software component.
All the J2EE DCs are deployed through separate EAR DCs and there are references from one to another ear DC where ever required.
Deployment of a EAR DC fails if the dependent EARs are missing at that time as it looks for some classes at the time of deployment. We could resolve this in development env as we have the control over individual EAR deployment.
But for deployment in QA through NWDI, where the whole software component is deployed as one SCA file, deployment is failing due to wrong order of deployment for the EARs. We are not able to figure out how to control the order of EAR deployments contained in a single SCA.
Please let me know for any further info.
Points will be awarded for helpful answers
Regards, Chandra

Hi Chandra,
It defines runtime-reference. And should automatically add references to application-j2ee-engine.xml
But as far as I remember it is done only in NW7.1
Regards,
Andrei.

Similar Messages

How to control shuffle play order?

Hi Everyone
I have an Ipod shuffle I think its 4th gen.
On the computer control panel I can delete songs Import songs in the library. I can check and uncheck. I can rate songs, I can follow all the advise from users and help forums online. I cant seem to understand what I'm doing. I do all the above taks thinking it is controlling the play back on the shuffle when I take the shuffle off the usb cable and putton the headphones.
Yet the shuffle plays sequential or shuffle the same exact songs ... I'd say 20 songs of the 120 songs that has been downloaded to it.
Help! How do I play other songs and control my play order in the earphones.

HI gerrlinggal
thanks!
I had to go to play list by highlight one song and right click the choose menu flyout Lawrence's" Ipod
This worked with one song i saw the syncing icon sync notice at the top banner. I had to highlight all new songs and preform that function as a group of songs
That worked .
Q. But it did not over right songs and cant seem to find how to access the shuffles list of songs on the IPOd/shuffle. So I can delete the old songs. ????? The menu in the ITunes manger is difficult and seem to show only songs on iTunes.
I really had to get lucky finding. the above previous trick.

How to control photo sort order in flickr publish folder

Using LR 5.3 and trying to control the sort order of photos in a Publish folder (Flickr). When I drag-and-drop the photos, they never end up in the location indicated by the dark black bar that appears under the mouse cursor. Usually appear within 5 or 6 places of the dropped location, but sometimes up to 20 places away from the dropped location. Futzing with the location sometimes gets them closer, but not always. It's very frustrating. I've seen comments about certain restrictions for manual sorting (e.g. not feasible in Smart Collections), but no specific reference to sorting in a Publish service. Is there a way to put the photos into the exact order that I want in a Flickr Publish folder? (Note: drag and drop does not work correctly... that's the problem).

Click the Action icon > show view options > Arrange by none > sort by name.

How To Use .ear Deployment in CE 7.1 ?

Hi @,
In our project we are using multiple Web Dynpro applications and later we need to deploy the same to various servers, we dont have NWDI and its all standalone applications.
As per my understanding we need to take the .ear files and deploy the same on those servers but in ce 7.1 How can we deploy these files as there is no such option available.
Regards

Hi,
Window->Show view->Other->Deploy View
Click ok
From this view add the archive and deploy to the connected server
For connecting to a server
use Window->Preferences->SAP AS Java
Regards
Ayyapparaj

How to control Remaining plan order value in PS

Hi Gurus,
I don't want to check budget in remaining order plan value at the time of Production order creation.
how can i control this. please suggest on this..
regards,
siddu.

Hi Siddu,
OPSV transaction to stopping plan value updating in plan version from production order.
so uncheck mark those parameter then test this scenario.
let us know if have any issue?
my assumption is on remaining order plan. Assigned = Actual Costs + Commitment + Remaining Order Plan
take example as we have PR=10qty, PO=10qty, GR=5. When we force close the PO, the 5 open quantity going to Remaing order plan, therefore the money trap in remaining order plan
so you can do teco to cost object is the one solution for above issue or reduce the quantity from PO so that it won't be go to remaining order plan. and 3rd one is like cost Project System > Costs > Budget > Define tolerance limits or Specify exempt cost elements but it will change your existing functionality so i would like suggest you to go through root cause by sap.
Regards,
Sanjeev

How to Control the Sorting Order of iPhone Contacts from Outlook?

In a series of editing steps we've loaded ca. 1,900 personal and business contacts from Outlook into a 1st gen iPhone with 2.0.1 software on it. To our surprise we found that while most of the entries were listed and sorted by company, certain entries were listed and sorted by the person's name. It looked random and there didn't seem to be any way to control it on the iPhone.
While troubleshooting the problem we synced up the iPhone with an empty Address Book on a MacBook Pro and found that the sort order flag was indeed set differently on these entries. When we changed the sorting flag of a contact in the Mac's Address Book to "Company" it also changed on the iPhone after the next sync.
Problem: In our business environment it is impossible to switch to Macs for contact administration. We need to do it from Outlook. This is one of several features needed for the adoption of iPhones.
Question: Is there a way to control this flag on the individual iPhone contact entries from Outlook Contacts?

Well, I think we figured it out.
Outlook doesn't offer a sorting flag on person or company name. Instead it uses a separate "File As" string. The problem with our contacts was that this "File As" string was frequently edited to be something else than exactly the personal or company name, e.g. it was set to an abbreviated company name. Once we set the "File As" to any of the defaults offered, i.e. person or company name, the sorting flag in iPhone was properly set through the synchronization.
Obviously, the application logic compares the content of these fields in Outlook and decides how to set the flag. If it can't find the company name in "File As" it defaults to person.
This was an expensive holdup for us. It cost us 2 man days to figure it out. Is there any place where such application logic is described?

How to Control the "tab order" in Adobe Captivate 8?

Hi Guys,
I was just trying to insert "tab order" to the module that I am creating using Adobe Captivate Version 8. I was not able to insert the tab order feature when I switched to the responsive project mode (project for Destop, Tablet, and Mobile).
Kindly guide me to insert tab order. I have checked all the online resources but was not able to find the relevant steps to create "tab order" in Captivate 8.
Thanks!
Peace

Hi,
You can set the Tab order for Interactive objects from the Properties panel:
This will open a dialog where you can arrange the order for all the interactive objects on your slide.
Hope this helped!
Regards,
Mohana

Weblogic.deployer and deployment order

Good day all,
Is there a way to force an application to deploy last (because of dependencies)?
I know how to modify the deployment order in the console or wlst, but if all applications are in the same application directory, how can you make sure that appxyz.war deploys last?
Thanks
Ash

Ashanty,
you may want to refer this link for deployment order of applications..
http://docs.oracle.com/cd/E12839_01/apirefs.1111/e13952/taskhelp/deployment/ChangeTheServerDeploymentOrder.html
I don't think weblogic.deployer will allow you to do deployment order and it can be done through Administration console only.
Thanks
Lawrence Manickam
http://toyork.blogspot.ca

Application deployment order with weblogic-ejb-jar.xml and jndi-name

I have two applicatation working on Weblogic server v. 10.3.6.
First of them creating one ejb stateless bean and creates JNDI maping for it (in weblogic-ejb-jar.xml file):
<weblogic-enterprise-bean>
     <ejb-name>ConfigMenegerBean</ejb-name>
     <stateless-session-descriptor>
     <stateless-session-descriptor>
          <business-interface-jndi-name-map>
          <business-remote>package.ConfigurationSessionRemote</business-remote>
          <jndi-name>ConfigMeneger</jndi-name>
          </business-interface-jndi-name-map>
     </stateless-session-descriptor>
     <enable-call-by-reference>true</enable-call-by-reference>
     <jndi-name>ConfigMeneger</jndi-name>
</weblogic-enterprise-bean>
Second appication have to refer for this bean by JNDI using spring been lookup :
<jee:jndi-lookup id="configManager" jndi-name="ConfigMeneger"/>
I changed deployment order parameter for both apllication(first=100 and second=500) in order to first app start first and share bean by jndi to another application. Unfortuantelly I got an error :
javax.naming.NameNotFoundException: Unable to resolve 'ConfigMeneger'. Resolved ''; remaining name 'ConfigMeneger'
How can I configure deployment order that first application make jndi mapping for bean, before the second application will use it ?

Ok in a way I have solved my problem (even if I am not completely satisfied by the way on how to proceed...). So thanks to message "JBuilder7.0 and Weblogic6.1" on EJB sun forum :
http://forum.java.sun.com/thread.jsp?thread=285735&forum=13&message=1255488
I have tried the following actions (mentionned in the other forum messages):
- To preserve changes to weblogic*.xml, the safest way is to change the ejb-borland.xml.
(I am not sure that I have applied this advice correctly, because I suppose that syntax is not similar in weblogic file or borland file).
And you can MANUALLY update the weblogic file in your JAR archive.
1. Open the EJB JAR file in Winzip and extract the weblogic-ejb-jar.xml file, so that a copy exists in your
project directory.
2. Open this file (in Notepad), add the WebLogic specific information, and then save the file.
3. Now, when you are finished with the build cycle and are ready to deploy, you may open the EJB jar file
and swap in the weblogic-ejb-jar.xml file."
Good Luck.

How to Confirm the SDAs deploy order of SCA in RemoteGUI of SDM

Hello everybody,
       We assemblied a sca file in NWDI when we finished development.
       But when we used RemoteGUI to deploy the SCA file in another NetWeaver2004s engine.The Deploy order is wrong.The SDM doesn't first deploy the Library,EAR.It deployed the SDA ordering by the letter order ,not the dependence order.
       For example,there are two SDA in the SCA file, one's name is <b>d_lib</b>,another name is <b>a_ear</b>.The a_ear depend on the d_lib.When SDM deploy the SCA,it first deploy the a_ear,not d_lib.
      How to Confirm the SDAs deploy order of SCA in RemoteGUI of SDM?

Hi Marc,
Thanks for your help!
I found the Prodiver.xml,and the content is:
<?xml version="1.0" encoding="utf-8" ?>
- <provider-descriptor>
<display-name>om/library</display-name>
<component-name>om/library</component-name>
<description />
<major-version>7</major-version>
<minor-version>00</minor-version>
<micro-version>0</micro-version>
<provider-name>pjs.com</provider-name>
- <jars>
<jar-name>pjs.comomwcalistwcalist_daoWcalistPackage.jar</jar-name>
<jar-name>pjs.comomlogequipdao~daoPackaged.jar</jar-name>
<jar-name>pjs.comomnotificationnotification_daoNotificationPackage.jar</jar-name>
<jar-name>pjs.comombasedaodaoPackaged.jar</jar-name>
<jar-name>pjs.comomlogareaareadaopackaged.jar</jar-name>
<jar-name>pjs.comompostpost_daoPostPackage.jar</jar-name>
<jar-name>pjs.comompostpost_daoSpecialtyPackage.jar</jar-name>
<jar-name>pjs.comomtaskdaopackaged.jar</jar-name>
<jar-name>pjs.comomgradeprojectgradedaopackagSDA.jar</jar-name>
<jar-name>pjs.comomlogreconlredaopackaged.jar</jar-name>
<jar-name>pjs.comomsafeexcepreportExcepReportPackage.jar</jar-name>
<jar-name>pjs.comomsaferecorddaoapi.jar</jar-name>
<jar-name>pjs.comomlogelogelogdaopackaged.jar</jar-name>
<jar-name>pjs.comomsysdaopackaged.jar</jar-name>
<jar-name>pjs.comombasevindbasedaopackaged.jar</jar-name>
<jar-name>pjs.comomlogsearchpersondao~SearchPersonSDA.jar</jar-name>
<jar-name>pjs.comomplacarddaoplacardPackaged.jar</jar-name>
<jar-name>pjs.comompostpost_daoPersonPackage.jar</jar-name>
<jar-name>pjs.comomsbillrecorddaosbillRecordPackaged.jar</jar-name>
<jar-name>pjs.comomdutyperson_dao~DutyPersonSDA.jar</jar-name>
<jar-name>pjs.comomrptdaoRptSDA.jar</jar-name>
<jar-name>pjs.comompostpost_daoEquipmentPackage.jar</jar-name>
<jar-name>pjs.comomlogtypelogdaopackaged.jar</jar-name>
<jar-name>pjs.comomsafeproeval_daoProEvalPackage.jar</jar-name>
<jar-name>pjs.comompersonpostdaopackaged.jar</jar-name>
<jar-name>pjs.comomlogsearchlogdao~SearchSDA.jar</jar-name>
<jar-name>pjs.comompublic~packaged.jar</jar-name>
<jar-name>pjs.comomspellgroupdaodaoPackaged.jar</jar-name>
<jar-name>pjs.comomlogpersonlogdao~packaged.jar</jar-name>
<jar-name>pjs.comompostpost_daoRlogPackage.jar</jar-name>
<jar-name>pjs.comomschedule_dao~ScheduleSDA.jar</jar-name>
<jar-name>pjs.comomreportrptdaopackaged.jar</jar-name>
<jar-name>pjs.comompostpost_daoRecordClassPackage.jar</jar-name>
<jar-name>pjs.comompostpost_daoReqpPackage.jar</jar-name>
<jar-name>pjs.comomlogshiftclassdao~ShiftClassSDA.jar</jar-name>
<jar-name>pjs.comomverifyrecorddao~RecordPackage.jar</jar-name>
<jar-name>pjs.comomunit_dao~UnitSDA.jar</jar-name>
<jar-name>pjs.comomdatadefinedefdaopackaged.jar</jar-name>
<jar-name>pjs.comomheader_dao~HeaderSDA.jar</jar-name>
<jar-name>pjs.comomspellspedaopackaged.jar</jar-name>
<jar-name>pjs.comomlogrecdlcddaopackaged.jar</jar-name>
<jar-name>pjs.comomlogsearchequip_dao~SearchEquipSDA.jar</jar-name>
<jar-name>pjs.comomcompanycomdaopackaged.jar</jar-name>
<jar-name>pjs.comommaceasyformdao~daoJAR.jar</jar-name>
<jar-name>pjs.comomdeclaredecdaopackaged.jar</jar-name>
<jar-name>pjs.comompostpost_daoFunlcodePackage.jar</jar-name>
<jar-name>pjs.comomlogeventlevdaopackaged.jar</jar-name>
<jar-name>pjs.comomclient_dao~ClientSDA.jar</jar-name>
<jar-name>pjs.comomlogdepldedaopackaged.jar</jar-name>
<jar-name>pjs.comomlogceqplceqdaopackaged.jar</jar-name>
<jar-name>pjs.comomrptinforptdaopackaged.jar</jar-name>
</jars>
</provider-descriptor>
I checked it and didn't find any error! What can i do?

HOW TO CONTROL ON CREATION OF SALES ORDER WITH REFERENCE TO EARLIER SO?

Dear All,
I want to contol on creation of Sales order with reference to earlier SO? While creation of sales order our enduser are creating sales order with reference to earlier month SO which I want to restrict. Recently I made changes in sales order like payment terms is grayed, system will atomatically pick pay terms from customer master.Now I am getting correct data also but enduser is using old SO no while creating new SO and old payment data is reflecting in fbl5n.
I want to restrict enduser while creating new SO with ref. to old SO. Only for returns they should be able to use Billing refrence. Pl. suggest how to control the with reference to ealier SO.
Nikhil

Nikhil Deshpande,
If you dont want allow create a sales order in referent to other one, just delete the copy control between these sales order type, so when the user tries to create a SO in reference to other one a message is displayed that is not possible.
Thanks,
Mariano.

How to change the execution order of data control and backingbeans

Hi,
I have a form for a BPM human workflow. It has an inputText and a selectOneChoice component in the form.
The list of value for the selectOneChoice is initiated based on the value in the inputText.
I have a data control - JavaBean, which returns a list of values based on a parameter for the selectOneChoice and the parameter is binded with the value of inputText defined in a backingBean. I also set the default value of the inputBox in the backing bean with setValue().
The problem I have is that the data control for selectOneChoice is loaded before the inputText or backingBean is loaded. Therefore, the parameter is null.
I tested the same combination in an ADF web app and it works fine. In the app, the inputText and the backingBean are loaded first and then the value of inputText is sent to the data control.
How can I change the order of the execution? I need to make the inputText and backingBean loading first before the data control for the list of values loading.
Edited by: user626218 on Oct 10, 2012 9:25 PM

Hi,
The inputText is pre-populated based on the user profile in the BPM instance. I tried to render the selectOneChoice if the value of the inputText exists but the data control for selectOneChoice is loaded before the backingBean so it keeps getting a null as parameter.

How to reference sapjco from EAR deployment descriptors

Hello techies,
I´ve set up an EJB to use the JCo RFC Provider Service of the J2EE engine. Connection from R3 to EJB works but as soon as the EJB gets invoked, I get the error 'incompatible bean type - no processFunction found' from the RFCDefaultRequestHandler.invokeBean(..., JCO.Function) method.
The reason is clear to me - the JCO.Function class is loaded by different class loaders and thus the method parameters don´t match.
I´ve read in earlier postings that it is neccessary to reference the JCO in the module project and the ear deployment descriptor. That´s where my question begins.
How do I reference the JCO in the module project (what´s that?)? I think it has to do with the EJB jar, doesn´t it?
In the DeployTool I found a way how to set a reference to a library in the menu deploy-->libraries. But I am not sure what to specify here. I entered 'sapjco', since I saw an entry in the managers/library.txt file. Is that correct?
Any hints are welcome!
Regards,
Jan

Jan,
you can set the reference to the EAR project using the reference.txt file that exists in the /managers folder.
In the library.txt file set a path which is reference to sapjco.jar files..like
library JCO sapjco.jar
in the refernce.txt add the JCO referece to the EAR project...like
reference Project library:JCO
where Project here is the name of your EAR file..
Ravi

How to Create one TLB Order manually with multiple deployed STR's

Hello,
We are currently facing an issue when trying to make a TLB manually by right clicking on the deployed STR's.
APO generates multiple orders for each item.
Business requirement is to generate one TLB Order.
For example there are 10 Confirmed STR's and the planner wants to choose the deployed STR's manually from the list of 10 products.   When we right cliick and select each product (for either partial or full ) it moves to the TLB order, but generates multiple orders.
Is there a way to restrict the requested lines to be in one Order? So that when the order is CIFed to ECC, there's only one STO generated with multiple lines.
Regards,
Bhavesh

Hi Bhavesh,
               By manual TLB process only you can create stock transfer order with SINGLE line item. because your deployed STRs always will have single line item and you are selection one by one and converting manually. in STD process you can not club items manually...
Yes it can be very much possible by automatic TLB run. it will take all the deployed orders and converting as TLB order by considering TLB profile where min , max limits maintained. also there is concept if you maintain loading group in product master based on that materials will be grouped together.....
Clubbing items into one order is done by TLB heuristics.. but when you do manually you are deciding how to do it?....
You can do one thing... after creation of TLB order with single item..you can edit and include some more items manually. Accordingly you need to delete deployed STRs.......
If you want to automate this then you need to look out for BADI... not sure possible or not
Regards
Thennarasu.M

How to enable SSL in order to access web appln. deployed in CE using https?

Hi,
I am new to Netweaver and this forum. Not sure if I am posting my question in right forum category. Please let me know otherwise.
Question -
I would like to know how to enable SSL in order to access the deployed web application in Netweaver environment using https instead of http.
System Info:
Netweaver 7.1
Database: SAP DB (KERNEL 7.7.04 BUILD 021-123-186-883)
OS: Linux (amd64) 2.6.18-194.el5
Note: I have general idea about how to enable SSL in a non-SAP application server like tomcat using valid certificate (like enabling SSL in tomcat and adding certificate to server & Java keystore). But since I am new to Netweaver, not sure how to enable the same in Netweaver environment.
Any help would be much appreciated.
Thanks
Edited by: Gopi.j on Oct 15, 2010 8:04 PM

hi
check the following sap help.
http://help.sap.com/saphelp_nwce71core/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
Best regards,
John

NWDI - How to control EAR deployment order

Similar Messages

Maybe you are looking for