NX6600GT-VTD128 VIVO / Blue Screen

Hi,
i recently bought a GeForce 6600GT AGP, finally got the VIVO drivers to work, but everytime i try to use it (with either MSN or a capture program (intervideo/windows movie maker) i always get a PAGE_FAULT_IN_NONPAGED_AREA / NV4MINI.SYS after a few minutes. and instantly with MSN. i tried a fresh XP install , still no go. its also a bit frustrating to see that nvidia hasn't passed the WHQL with those VIVO drivers. anyone ever got it to work properly ? PLEASE HELP !
Antec SmartPower 450Watts +5V(40A) +12V(20A) +3.3V(28A) +5V&3.3V combined: 250w +5V,+3,3V&+12V=430w
ASUS P4P800 Deluxe
Pentium 4 2.4Ghz 533 FSB
Dual Corsair CVS 256Mbx2 DDR 400 (running at 333) 2.5CL memory
MSI GeForce 6600GT 128Mb AGP
SoundBlaster Audigy 2 ZS
2xMaxtor DiamondMax 8 plus 40Gb
LG Flatron 17'' L1730S Flat Panel

Hi,
I recently had a similar problem with my MSI 5900 VTD128. I spent days trying to resolve this and eventually came to the conclusion that seemingly MSI Vivo cards are not stable unless you use the drivers MSI specifically write for them. Using generic Nvidia VIVO or other brand driver causes havoc for my system, with regular BSODs. Don't get me wrong: any driver will work fine if you don't intend to make use of the VIVO function but if you do read on. The only solution I found was to uninstall both the capture drivers and main Nvidia graphics driver. Run Drivercleaner from Driverheaven.net to remove all traces of any Nvidia drivers. Install whatever graphics drivers MSI provided with the card temporarily even though I know they may be old. Then download whatever the latest version of MSI Live Update from the MSI website here. Run this program while online and doiwnload whatever is the newest version in the list of drivers that it recommends. This may not always be as new as the more general Nvidia drivers available on the net or indeed available on the MSI site but trust me this program does not lie, if you use a driver that ain't listed then VIVO functions will always be a problem. Now after you have upgraded your main graphics driver to the one suggested by Live Update, go and dowload the MSI capture driver here. There is no specific one listed for the 6600GT but the version 3.08 driver for the FX series should be ok on the 6 series as well. This worked for me and is the only way I could get VIVO functionality from my card, hopefully it will work for you too. The Blue Screens messed up my system so bad that I had to reinstall due to the amount of corruption caused to other drivers in my system, not a job I like doing too often. Anyway good luck with this and I hope you get sorted.

Similar Messages

[GeForce 6] nx6600gt-vtd128 vivo driver for windows xp x64 edition?

Are there any (beta or release) wdm driver for this msi's nx6600gt-vtd128 for windows xp x64 edition? If not, are there plans to make an x64 driver in the near future?

I have the same card, and i can't find ANY capture driver for it. Not even the WindowsXP 32-Bit.
Could you enlighten me on where exactly did you see the 32bit capture drivers? (Other than the MSI CD)
EDIT:
Now I noticed you said NVDIA's Website, they're even older than the ones MSI provided on the CD. Older by like 2 years.
What I'm looking for, is a place where I can find fresh new WDM drivers. Or at least an online package of what's on the CD
Drivers should not be availiable only on a CD.

[GeForce 6] Big Problems with NX6600GT VTD128 AGP and Video Overlay

Got trouble to Install the NX6600GT VTD128 AGP VGA-Adapter right.
I already tried out with latest Drivers from MSI 71.22 and the ForceWare 66.93 NVidiadrivers, but no Overlay at all in my Grabbing Software.
It's a DV-Storm of Canopus with Storm Edit installed. With my Ti4200 (also MSI VGA-Card) never had those Problems.
In the Canopus Storm-Edit Software is an Preview-Window to check the grabbing Process. Now, with the new 6600GT Card it's a black screen.
When I press any key, shortly I see a TV Picture. It's an Overlay Problem of the 6600GT.
How do I have to install/configure the 6600GT VGA that Overlay is working fine.
The System:
Intel P4 HT 3,2 GHz
ASUS P4P800 with AGP 8x
DV-Storm in PCI Slot 2
IDE Raid Promise Fasttrack 100
1024 MB DDR400 Corsair CL2
Latency Timer on 128 (doesn't work with PCI Latency Timer = 64 too)
DirectX 9.0c, XP with SP2 and latest Patches, MSI-Driver Version 71.22 (or Reference Driver 66.93 NVidia)
This Configuration is working fine (Overlay = OK) when re-install the GeForce4 Ti4200 of MSI
>>>Problem solved<<<
.....a wonderful Canopus Patch to "clean" the ForceWare Drivers like a big LIGHT in the Nvidia-DARKNESS gives hope and wellness to my PC

I found the solution while I cruised in the forum, I used Driver Cleaner to erase the driver file on my HD, and the installation worked perfectly... Sorry about my useless post
If it can help another one...

No Video-In signal for NX6600GT-VTD128

Hi,
I'm having a problem with my NX6600GT-VTD128 AGP. The video-in is not working. I have connected my TV and a video camera via SVideo and Composite connectors but there is no signal. I am using various programs like Sage, PowerVCR, Premiere etc and have also selected the proper "source" in every program. Installed latest driver, 66.93 from NVidia, 66.72 and 71.22 from MSI... Of course 2.20_wdm-vivo driver from NVidia is installed as well.
Please advise..........
Thanks

4.04? Ic, didn't know that a newer version existed..... nVidia site has only 2.20 and nothing about VIVO in the beta drivers. I found 4.03 from Sparkle and 4.04 from Gainward...... I'll try these today and post tomorrow with the results.
Thanks!

Compatibility ?? MSI NX6600GT-VTD128 with chaintech motherboard ?

hi
i have bought recently this MSI NX6600GT-VTD128 and install it on chaintech 7VIL4 with 512 ddr athlon 2800+ 400W psu and cant start the pc black screen no boot only fan working.... so my seller told me that maybe it is not compatible wat do you think about this ???
thanks for helping i try everything except install it on other pc
bye

Just because yours has more watts doesn't mean it is more powerful.
Check out this topic https://forum-en.msi.com/index.php?topic=76923.0
Also please post the max amps for your powersupply on the 3.3v 5v and 12v rails. This info can be found on a sticker on the side of the PSU.
Good Luck
Jeremy

NX6600GT-VTD128 AGP D3D Problem

Hello Experts,
first I want to show some screenshots to describe my problem.
Counter-Strike Scource
Half-Life 2
Nascar Racing 2003
All screens are taken from a 1280x1024 resolution with 4x AA and 8x AF (Direct3D). After a few minutes this lines flicker on the screen but only in D3D and a 1280x1024 resolution. In Nascar I can switch to OpenGL and everything is fine. HL2 and CS-S are also fine in 1024x768 resolution. Do you think, this is a hardwareproblem or a ForceWare driver problem?
I tried the 71.89 and 71.84 but nothing changed.
My system is not overclocked.
I could not appreciate that in lower resolution and with OpenGL everthing works fine.
greetings

Quote from: StarkerTobak on 21-April-05, 20:22:05
Thx for your response and tipps.
After a few tests with underclocking the card (core & memory) I had no luck and all problems already exists. Also if I disable AA and AF, set 4x AGP only and turn Fastwrites off.
My last try, befor the card goes back to the dealer, was switching the driver. I unistall the 71.89 driver and clean the system with a detonator destroyer. Then I install the nonofficial 76.44. Suprise, suprise, no problems with Nascar Racing 2003 Season and only minimal problems with HL2 and CS-S. A test with SWAT 4 was also successful (befor switching the driver I had the same problems like HL2 ... )
Sorry crull, i think u lost your money . It looks like that the official forceware driver had a few problems with the 6600GT cards anfd many things looks like a beta driver.
I will do some more tests with 3D Mark 2003, stay tuned.
regards
ST
I can't understand how you can have those problems with the same drivers I have used with my NX6600GT-VTD128 running HL2 and CS.
I have tested probably around 7 or 8 drivers, some beta but nothing at all like what you got. In fact I haven't seen any artifacts with any of the drivers I have tested. Right now I'm using the 76.44's.
So how can you have all these problems with the same exact card and drivers that I do not have?
Even if you find it gets somewhat better with drivers, I still think it is hardware related or maybe drivers that are not directly video card such as chipset drivers. Just because of the fact I have not had any trouble like you have had using the same drivers, same game and same video card.
I didn't want to say this at the start but there isn't only software and hardware problems, there is also user problems as well. So I was really gonna put my money on user problem, but I was just being nice blaming it on the hardware. (kidding) It doesn't matter anyway because any money I lose on that bet I can make up for it when you pay the bill I am sending you for my services.

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

Mini DVI to Video: blue screen after disconnect

Hi,
can't find a solution: after disconnecting the mini dvi to video-adapter I always get a blue screen and I need to restart my brandnew 20" iMac.
I use it to connect my (old) television via s-video. It is clear that I bought the right Mini-DVI-Adapter.
Can anyone help or has the same problem?
iMac 20" Mac OS X (10.4.8)

Thanks for the help. I'd figured out that shutting it off would keep it from happening and was probably a "best practice," but since 90% of my television watching is from my eyeTV, I'd be turning it on and off a lot.
The only problem with leaving the setup plugged in, is that as soon as the mini DVI cable is plugged in, the resolution on the iMac resets itself to super-large fit for television mode and becomes virtually unusable as a computer, thus when I want to use my computer, the cable has to be unplugged....unless of course you know something I don't
Thanks,
Shaun

My iPhone would just randomly give me a blue screen and then restart--did that a bunch of times between Tuesday and last night. As of last night, it WILL NOT come back on. iTunes says it's in recovery mode....what does all of this mean???

Tuesday night I was texting a friend and when I went to open her message, my screen went blue and restarted. I just wrote it off as weird and went on about my business. Later that night, I tried to turn on my phone and it would not turn on. I plugged it up, held down the power button, and pressed the home button all numerous times. I looked online and it said to do a "hard reset" by holding down the power and home button at the same time--my phone then came on. Throughout Wednesday, it would give me a blue screen and restart--nothing major just really annoying. I took it to the local Verizon store where I bought the phone from and he said that it was some type of hardware defect and I was still under my year warranty so I could get a new one for free--the free phone won't be here until tomorrow, Saturday. I took it home and it didn't give me any trouble for a couple of hours. The next day it was cooperating and then I left town for a little while and it acted up (blue screen and then restarting) a few times. When I got home, it acted up again and so I restarted the phone and it was working fine. A few minutes later, I tried to check my messages and the phone was off again. No matter what I do, my phone will not come back to life. It had at least 45% battery last time I looked at it. I decided to plug the phone up to my computer and see what it did--my computer recognizes that there is a phone hooked to it and it says that it's in "recovery mode". It also said that if I'm having issues with my phone, that I need to reset the phone via iTunes. I guess the questions that arise are
1. Why is my phone doing this?
2. If I reset my phone, will it go back to working again? I ask that because I don't want Verizon to charge me $300 when they send me the replacement phone and I won't need it (assuming that the phone decides to work once it's been reset).
3. What type of hardware defect is this that is causing this issue, not only with my iPhone 5S but others as well?
4. Shouldn't people be notifying Apple and letting them know that they need to fix this issue?
5. Should I report this issue to Apple even though I didn't buy the phone directly from them, but through Verizon?
Any help that anyone could give me would be greatly appreciated! This whole situation has me stressed out and seriously confused.

Hi, beth.lau.gr.
Thank you for visiting Apple Support Communities.
I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen. I wont be able to give you an exact answer as to why this is happening. However, this is the most relevant troubleshooting article for this issue. This article also provides options to reach out to us via phone for additional assistance.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

Blue Screen, kernel_data_inpage_error, disk drives missing on reboot

I just bought a new laptop, ASUS ROG G750JW, and installed a Mushkin Chronos 240GB SSD. I clean installed Windows 8.1 Pro on the SSD, and kept the original 750GB HDD, as well as a 500GB HDD, as secondary drives. I have been having rather random blue screens.
I had to disable auto-restart to see the error message: kernel_data_inpage_error.
The fun part is that when I soft restart after the blue screen, my hard drives are missing from the BIOS. I have to completely power down and then restart it for the HDDs to be detected. Since all 3 drives go missing, I can be rather confident that the problem
is not caused by any one of the drives (i.e. my SSD is not defective).
The problem originally occurred when I was installing Office 365 - the laptop would blue screen every time I tried starting the installation. However, each attempt would proceed a little further and eventually Office installed, so I can't use that as a reliable
test. Other occurrences have been, as far as I can tell, completely random. I was noticing that the BSOD occurred often enough during Windows Update installs, but I could not find any significant correlation when I compared my event log to my update
log. I was able to install the most recent Windows 8.1 Update released this Tuesday with no problems.
I have run diagnostics on all of my drives, which come back completely green. I have run chkdsk and sfc /scannow, none of which reported any errors. I have also run Driver Verifier according to the instructions
in this article which did catch several "0x000000c4" bug checks, which I was able to narrow down to the miniport driver.
My last action was to disable checking this driver in Driver Verifier, and I have not since experienced any problems. I have just finished running a 2+ hour long stability test using AIDA64 portable trial version, which caused no problems.
Since my drives go missing when this happens (whether as a cause or effect, I do not know), I have no memory dumps or event logs to share. I have since configured Windows to save memory dumps to my laptop, but with no reliable way to cause the blue screen,
I've been unable to capture a dump yet.
Soooo who wants to help me fix this? I've been offered warranty RMAs by both ASUS and Mushkin, but until I can reliably reproduce the error and confirm the cause, I'm not sending anything back (cause I don't know
what to send!).

Jay
If you don't have dmps lets take a look at your event viewer logs
Please provide us with your Event Viewer administrative logs by following these steps:
Click Start Menu
Type eventvwr into Search programs and files (do not hit enter)
Right click eventvwr.exe and click Run as administrator
Expand Custom Views
Click Administrative Events
Right click Administrative Events
Save all Events in Custom View As...
Save them in a folder where you will remember which folder and save as Errors.evtx
Go to where you saved Errors.evtx
Right click Errors.evtx -> send to -> compressed (zipped) folder
Upload the .zip file to Onedrive or a file sharing service and put a link to it in your next post
If you have updated to win 8.1 and you get the error message "the system cannot find the file specified" it is a known problem. The
work around is to edit the registry. If you are not comfortable doing this DONT. If you are, backup the key before you do
Press Win+"R" and input regedit
Navigate to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/Analytic"
Wanikiya and Dyami--Team Zigzag

Blue screen crash when connecting iPod

Whenever i plug my ipod into my computer, windows goes to a blue screen with the following message...
A problem has been detected and Windows has been shut down to prevent damage to your Computer.
If this is the first time you have seen this stop error screen restart your computer. If this screen appears again follow these steps.
Check to be sure you have adequate Disk space. If the Driver is identified in the stop message disable the driver or check with the manufacturer of the driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates.
Disable BIOS memory options such as Caching or Shadowing. If you need to use Safe Mode to remove or disable components Press F8 to select advanced start up options then select safe Mode.
Technical Information
*stop:0X0000007E (0XC0000005,0X00000000,0XF7A9B7C8,0XF7A9B4C4)
Beginning dump physical Memory
Physical Memory Dump Complete
Contact your system administrator or technical support Group "
This all started happening when i was away in America and my dad plugged his iphone into my pc to try and get some of my music, which caused the same crash. My ipod plugs in fine to his computer though. Any advice much appreciated

Apple Genius, behave yourself.
Here's the article how to fix this problem: http://support.apple.com/kb/TS1502

Error 13 = Blue Screen of Death?

Thought I'd try this board and see if anyone knows anything about 'error 13' and Panther.
I have been plagued by this error message which pops up whenever I try to print from either of my printers or burn a CD. This all happened after I tried to load a demo version of Adobe Illustrator CS2.
Over the last day I have tried the following:
* deleted the apple.com.print preferences
* reset the PRAM
* unplugged, unpowered and restarted the printers and their USB connections
* deleted the printers from the print setup utility and tried to reinstall them (but there too I get the 'error 13' message. Printers won't load but they do show up as if they loaded. Just won't work, that's all.
* tried logging in as a new user, and then the printer message is "Not enough RAM" to print.
* repaired the disk permissions from the CD
Generally I've done everything I can think of... except to reload the OS, which I hesitate to do because I have to first load Jaguar, then the Panther update, then the other updates. Last time I tried that things didn't quite work out.
I do have an external backup drive, which also got corrupted as I tried loading the Adobe Illustrator CS2 on that disk too. Dumb I know...
So... anyone know what 'error 13' means?
Is 'error 13' the Mac equivalent of the Windows Blue Screen of Death?
Thanks for any input...

Hello Pawel,
I have looked over the service request you mentioned about acquiring 2 PCIe-6537 at 20MHz sampling rate on all 32 lines. In order to narrow down this issue, I think it would be best to try only acquire from both cards without doing any triggerring etc. Also when performing this test, I would only want to acquire from 8 channels on both cards to see if this reproduces it. If this works, we can slowly add more elements to narrow down what the issue is and make us more effective to solve the problem.
I also wanted to ask if you have tried this setup on another machine and if it worked.
Along with this, have you tried to create two Digital Tasks in MAX and try to acquire for the same amount of time to see if the issue reoccurs here? This would tell us if this problem is connected to the driver/computer or LabVIEW.
Jim St
National Instruments
RF Product Support Engineer

Windows 7 Blue Screen - Random Shut Down

I'm having problem with my Toshiba Satellite L505 which randomly shows a blue screen prior to shutting down and restarting. I have use my system recovery disk to return my computer back to it's original state. The computer worked fine for a couple of month but has crashed again. Below is a sample of the blue screen messages prior to shutting down:
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: ntoskrnl.exe
KMODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff800032a526b, 0x0000000000000000,
0x000000007efa0000)
*** ntoskrnl.exe - Address 0xfffff800032c4c40 base at 0xfffff8000324f000 DateStamp
0x50e79935
2nd blue screen crash message
A problem has been detected and Windows has been shut down to prevent damage
to your computer.
The problem seems to be caused by the following file: PCIIDEX.SYS
KMODE_EXCEPTION_NOT_HANDLED
If this is the first time you've seen this stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select Safe Mode.
Technical Information:
*** STOP: 0x0000001e (0xffffffffc0000005, 0xfffff800033c6cda, 0x0000000000000001,
0x0000000000000018)
*** PCIIDEX.SYS - Address 0xfffff88000e879d4 base at 0xfffff88000e86000 DateStamp
0x4a5bc114
Does anyone know what this means and would be able to help.

Hiya
Run a full computer scan with your antivirus software. virus Backdoor.NTHack. may be the problem, and it runs Dl.bat in folder InetPub\Scripts.When you boot up the computer, go to task menager (CTRL+ALT+Delete), look if you have this runned: Firedaemon.exe, Sud.exe, Os2srv.exe, Mmtask.exe.
2. If you have a CARD READER than go to bios "Integrated Peripherals" and set Legacy USB storage detect to DISABLED
Let me know if you get any more problems

Blue Screen when syncing IPOD

I have been perusing the threads and I am beginning to see some common problems with a few others out there. The Blue screen STOP messages seem to be happneing to others.
I have tried everything including updating windows with the newly released patch today.
Do any of you "experts" out there think that this problem might have to do with the recent windows vulnerability and the long awaited patch released today?
There are lots of news reports out there indicating that this particular windows flaw was very critical and my problems started right about the time the flaw was recognized.
I restored my IPOD as suggested with the 5 R's and now I am bummed because my IPOD is empty and I finally got my PC to recognize the IPOD but everytime I resynch all of my 37 gigs of MP3s to my IPOD, my PC crashes after about 100 MP3s and gives me the Stop message and this error string -
STOP: 0x0000007E (0x0000005, 0xDF1BA804, 0xF89FB89C, 0xF89FB598)
Can anyone please help us?
thanks
Zep

Not sure I'd care to be called an expert (or even an "expert").
As the discovery of this "flaw" coincided with the onset of your problem I rather doubt it is the cause, since the flaw must have existed before it was discovered. Blue screens are often (but not always) caused by broken drivers or memory problems. If your OS is generally stable, then it does tend to point towards some sort of a driver issue. It seems to me that the 5R's tends to focus attention on the iPod (I guess apple presume that the OS is OK or they just don't want to go there!). Some people might argue that no (normal) device you attach to the comp should cause it to crash, but that is rather academic for you right now. My suspicion is that it is a problem with the comp - well a device driver or memory. Another possibility is that there is more than one problem - and whichever problem happens first triggers the other.
I doubt if the latest Microsoft patches will fix your problem - but who knows! I'd download and run a decent memory test program (e.g. Memtest86) and make sure you eliminate that as a cause. Are you in a position to attempt a restore? That might be worth considering. Otherwise, try doing a complete uninstall of iTunes and the IPod software and starting over. As a last resort you might need to consider re-installing windows.
I guess you've already done all of the obvious comp things (like running chkdsk). Have you, or are you able to test the iPod on a different comp?

Blue screen 0x00000116 error

I have just bought and installed my new 280x by msi, everything was working fine i installed all the drivers for everything including my motherboard and i get this blue screen everytime i try to use something, sometimes it happens as soon as i start up my pc.
My i remind you that i have installed EVERY new driver for my graphic card and my motherboard. i have even tried to install beta ones and there was no difference. I have also tryed reinstalling windows and starting again installing all the new drives and i still have the issue.
Can someone please help my with my problem because im not happy that my new computer does not work
Thanks Robert

Mate i have done all of that still dont work, when i install the drivers they are fine for about 2mins then it crashes, sometimes it takes about 5 mins sometimes it take when i first go on windows
I was thinking about trying to install an older version of the driver on the computer, may i add this is a new build computer parts were put together on sunday
I really dont know what to do, so i was things that its something with my gpu and i think i need to use the warranty and sent it back, get a new one
Can anyone help?? please reply
Robert

NX6600GT-VTD128 VIVO / Blue Screen

Similar Messages

Maybe you are looking for