Images become unproportional when publishing

Please see below. This image was much wider in muse and when published in became unproportional.
And this is a button, on some pages it displays well and on others it loses its styling.

but i don't want this.
Place it pixel exact! Resampling means the image is placed at sub-pixel values. Aside from that you would also get softness if the image is not properly converted to the target color space and automatic conversion creates mix colors whose individual components blend differently with neighboring pixels, which in part is simply an artifact of on-screen simulation. In any case, you will only be able to get a proper barcode in CMYK/ Duotone/ Multichannel modes, where you can make sure it appears on the spot black ink separation so it does not get halftoned and loses its sharpness again. ideally it would even be native vector data...
Mylenium

Similar Messages

Images become blurred when placed in a PSD document

I have a QCODE (barcode) which is a 2-bit pure black and white images.
However, when I place it in another open document, the image becomes blurred when it is placed and the definition of the QCODE is compromised.
How can I stop PS from blurring the image.
I'm guessing it is trying to smooth out the placed image, but i don't want this.
Many thanks.

but i don't want this.
Place it pixel exact! Resampling means the image is placed at sub-pixel values. Aside from that you would also get softness if the image is not properly converted to the target color space and automatic conversion creates mix colors whose individual components blend differently with neighboring pixels, which in part is simply an artifact of on-screen simulation. In any case, you will only be able to get a proper barcode in CMYK/ Duotone/ Multichannel modes, where you can make sure it appears on the spot black ink separation so it does not get halftoned and loses its sharpness again. ideally it would even be native vector data...
Mylenium

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

My daughter's older Ipod Touch is having a problem with images becoming pixilated when taken from an e-mail and placed into her camera roll. ( She wants to put on Instagram ) Any help?

I think that may be a consequence of the email provider she is using. Some services (AOL is one example) inspect and modify email attachments, particularly photos, resulting in reduced resolution compared to the email that was sent.
The iPod does not do this. The resolution of the picture in the email she receives will be identical to what is imported.

Transparent background layer become black when publishing on iWeb

Dears,
I used Photoshop CS to create a pic without background. As usual I made my selection, copied it, paste it on a new file. Then a deleted the background layer (tried with or without merging/flattting the pic) and saved it in .jpg but also in .pgn
When dropping the picture in iWeb 2.0.2, everything looks great. The picture does not have a background.
But when published on .mac, the background becomes black.
I tried almost everything when formatting the pic, although the backgr remains black.
Just before I made the same with a wind turbine pic and it worked perfectly.
See on: http://web.mac.com/daniel.daplincourt/daniel.daplincourt/Vide.html
Can anyone help me plsss?
Thank you!
Daniel

I have the same problem with the black backroung on my photo. I saved it over has a png but it still has the black background when I publish it to .mac. I would match it to the background color of iweb but I have a textured background. Is there a step that I am missing when I save it out to a PNG. Any other suggestions would be greatly appreciated. Thanks

Images not appearing when publishing on web

Hi,
I have created a Flash object which uses an xml to read the image path and few other attributes. I could successfully generate the swf and publish (html) the object.
When I view menu.html, independently in a browser it works fine. However, when I embed this, generated html (menu.html), in the home page of another website(homepage.html), it breaks. The images are not displayed.
All of the templates - config.xml, menu.fla, menu.swf, menu.html & homepage.html (of the other website) are all in the same folder.
Any suggestion.
Regards,
zona

Hey, I could make the images appear now....
The xml was passing absolute path. So when I generated the html from Flash (file/publish) and opened this html in a browser it was working file. However, when this html was embeded in another html it broke.
Using Relative path, in the xml works.
Now the images are taking 2 - 3 seconds to load. It is slow. Is there any way (in Flash) to cache the images once they are loaded for the first time.
Any suggestions.
Regards,
zona

Background image displays differently when published

I am using Captivate 5. I did a software simulation and in Captivate the background image is correct (the one on the left) but when i preview it or publish it and view in the browser the colors are off (second image) ..I tried to play around with the brightness/sharpness but it did nothing dramatic...any suggestions?
Hi,

Hi there
Generally speaking, Optimized ofen works well too. I'm unsure of the file size differences (if any) between the two settings. Because the image quality improves it would be logical to assume that the file size will increase.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Rotated Text/Images look fuzzy when Published

I've a menu on my site which uses angled text. As soon as I publish this however, the text gets fuzzy edges. I thought I could get over this issue by creating the links in my meny as graphics in PS and importing them as buttons but as soon as I roate them in Muse they get fuzzy edges again.
I havn't made the site live yet as it's in very early design stages.
Does anyone have an answer to fix this issue? Thanks

Thanks for coming back to me! I tried that actually as well. I rotated the images which are the links in PS and then imported them and it works fine from a quality point of view but it introduced another issue. My menu is basically composed of links at an angle as I was saying but I save this as a rectangle from PS and import. Only the centre part of this rectangle has text, the rest is transparent. When I align them all up in Muse, some of the links overlap which causes issues with my buttons. If I roll over one, it activates the one beside it. I couldn't see any other way around this other than to create them flat and then rotate them in muse. Do you see how I can fix this?

Images become choppy when I resize to a smaller size

Using Fireworks CC, when I resize images to make them smaller, the image is pixellated and choppy. Any solution for this?

Herbert2001, thank you for your reply. I didn't realize Adobe stopped supporting Fireworks. It's really weird, I've been down-scaling .jpg and .png images for years w/o problem - large images 2000 pixels down to 300 pixels and smaller and it worked beautifully. Here is what I am getting now:
The lines become choppy. If it's a more complicated image, such as a house with siding, the lines become even choppier.
Any ideas?

After editing camera raw and export as jpeg,image becomes overexposed when view on light room..please advise.

need some help here. don't know if i can describe this accurately.
i was using lightroom previously. edit my raw file and then export in jpeg. everything appear normal as what i wanted.
recently i got cs4 and started using bridge. now after i edit my photo in lightroom and export,the view of the jpeg file appears overexpose(exposure was increase) and when view on adobe bridge same problem. but if i open photoshop and use my workspace colour setting everything is ok. when i see my picture on iphoto it is normal as per i have edited. i just don't know what setting i have touch that cause my viewing of edited photo on lightroom and bridge goes overexpose. on bridge,thumbnail ok but preview bad...
for the record: i just install CS4 and snow leopard recently. before this i have no problems with LR. I'm also not sure if i have accidentally change any settings.
i shoot with a 5D mark 2 and use the raw file for edit.
will appreciate any advise. Thanks

grjacek wrote:
Is it possibe to return to a RAW image and edit it once I've exported it to another location as jpeg?
Yes
I've edited and exported an image to a different folder on my desktop. I've realised I still need to do some work on it
but when I try and open it again in Lightroom ( I see it in Library) I get a mesaage saying file not found...Please help
We're going to need a lot more details aobut exactly (EXACTLY) the steps you follow after you do the export, because normally I would say this is one of the easiest things possible in Lightroom. Are any files moved or renamed or disks unplugged in between the time of export and the time when you try to edit again?

Image becoming distorted when printing - smartform in CRM system

We are using CRM 5.0 and have to create a smartform for the acknowledgement of the order. The output is triggered correctly but marketing want me to include an image at the top of the page. I understand that you are only able to load tif or bmp into smart forms and indeed they are printed, however when printed the image is not very clear - looks like it is resizing.
I have tried changing the image in many different ways - and using paint shop pro for uploading the image. I have found that if using TIF the only compression option that uploads is packbits. I have saved the image with as many colours as possible and then reduced it - each time the image looks rubbish! However when I view the file (from my computer) in PSP it looks ok.
I have searched the forums for help but not really found anything that useful. Does anyone have any suggestions how to get the image to come out as expected?
The image stretches across the whole width of the page and just over 3cm deep. There are quite a few colours in the image and it is fairly busy.
Driving me mad here! anyone got any ideas? Maybe I need to install additional filters or something???

managed to get this corrected using faststone image viewer and converting images to 300 DPI.

Image appears flat when published from Lightroom 4 to Smugmug but not when exported as jpgs, help?

I have searched the forums and the internet to no avail, I cannot figure out why an image I am publishing directly to smugmug via LR 4 appears flat. My guess is it has to do with the color space since upon export as a JPG the image contrast appears fine. I shoot camera RAW but copy as DNG upon import, I cannot locate color settings aside from the external editing options. Why is this happening? I would love to continue uploading/publishing directly from lightroom to smugmug.
Here is a link to the flat image uploaded via the smugmug plug in
http://www.kimstarphoto.com/photos/i-XHWXCTv/1/X2/i-XHWXCTv-X2.jpg
And here is the published JPG
http://25.media.tumblr.com/547e9a23a169f83611d0fd0e56526d6b/tumblr_mvibfpkCV21rhkurwo1_128 0.jpg
Any thoughts or input would be greatly appreciated.
Thank you!

No, I'm not sure links works in an interactive PDF (it has SWF-player embedded).
The default slide quality since 6.1 is now Optimized, I have been pleading for that for reasons like what happened with you. If you use 24-bit graphics (maybe with transparent pixels), or want crisp text, it is logical that you cannot achieve that with 8-bit quality. But not every CP-user is knowledgeable about that kind of graphics stuff.
Lilybiri

Still image becomes blurry when played in iMovie 10.0.7

I am attempting to use still images in an iMovie 10.0.7 presentation. I have defeated the Ken Burns effect. The clear image drops out of focus when I press play and pops back into focus when the clip ends. Is there a fix for this?
Thanks.

That's a feature, lowering qualiyt while editing; on final export you'll notice a much better quality ....

FCPX: Inserted Images become Fuzzy when Played

Sometimes I have this problem (like now) and I don't know what causes.
I am creating a very short video with 14 images (faces). I just inserted an additional image between two existing images. It looks fine but when I play the video the inserted image turns fuzzy/blurred.
What causes this and how can I fix it?

Does it need rendering?
Ensure Background rendering is turned on in the preferences and wait a few seconds for rendering to start.
Only play it when the render reaches 100%.

Graphics become illegible when published

Hi,
I've published a lot of graphics on my websites, and most come through fine -- both illustrations and photos. However, one illustration which displays perfectly on iWeb, but comes up looking badly out of focus on the published website. So too, on any of my illustrations, text comes out fuzzier in the published version than in the iWeb version. This is especially bad if I use a colored font rather than black font -- more bleed, I suppose you'd say.
Grizman

Grizman,
Hi there. Yes I have had this happen. I am not sure of the solution or if there is one.
But you are stating a phenomena that does occur. Apparently iweb renders non safe (web standard) fonts or fonts w/ effects such as shadow....as images. So the quality is different. Looks great in iweb b/c of the fact that it is still text but as it is published it is rendered as a graphic. This is so that other browsers can see the non-standard font.
I suppose you have checked out all this so......I'm not much help except to confirm your findings.
Do you have nonstandard font or one w/ effects? Or is the font too close to an image?
If all is well and you just have standard........you could possibly try a technique called textedit passthru.
jabberwock

Is anyone else having problems with large files, such as installation images, becoming corrupted when downloaded in Mavericks using Safari?

I am finding that when I try to download a disk image file, such as Office 2011, it reads invalid checksum, is corrputed and will not install. I tried to download it several times and even unchecked in the Disk Utility Preference Pane to verify checksums. The way I solved the problem, was to go to my Windows Machine and download the image, put it on a USB flash drive and install it on my Mac from the stick. Not a proper solution, but it did work. Has anyone out there had this problem? This is applying to any large .dmg files not just Office 2011.

I'm having exactly the same problem with the dmg file for Office 2011, tried downloading from my windows machine with no luck, still having the invalid checksum message.

Images become unproportional when publishing

Similar Messages

Maybe you are looking for