OAM 11g integration with Demantra, VCP and APCC

I have a requirement here to implement SSO between the following applications using the OAM 11.1.1.5
1.     Oracle e-Business Suite 12.1.3 (iSupplier, iReceivables and iStore)
2.     VCP ( Value Chain Planning )
3.     Demantra
4.     APCC ( Advanced Planning Command Center )
I am following the below url for configuring the OAM with Oracle e-Business Suite to implement SSO.
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=BULLETIN&id=1309013.1
And VCP, demantra and APCC applications have been deployed independently on it’s own application servers on three different hosts.
I am trying to figure it out the SSO implementation approach for these 3 applications. I would like to know whether Oracle has got any out of box SSO implementation techniques for these applications as EBS. I would appreciate if someone shares oracle document links related to this integration.
I am seeking experts suggestion on this to proceed further.

David,
Your Principal name should be the SSO LB URL.(ie :sso.mycomany.com)
ktpass -princ HTTP/sso.mycomany.com@DOMAIN -pass XXXXXXX mapuser DOMAIN\user -out oam.keytab.
Also make sure sso.mycomany.com has a reverse DNS configured correctly.
you can check using dig command
ping sso.mycomany.com
What ever the ip-address
dig -x <IP-ADDRESS>
Check in the reverse DNS section there should be 1 record.
;; ANSWER SECTION:
1.1.1.1.in-addr.arpa. 3600 IN PTR sso.mycomany.com.
Let me know if you have more questions.
Thanks
Saurabh

Similar Messages

OAM 11g integration with Kerberos on cluster with load-balanced virtualhost

Hello!
I need to make a Kerberos integration with OAM.
I find following notes about OAM 11g: WNA Configuration for HA Clusters [ID 1365888.1] (https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=223640518878014&type=DOCUMENT&id=1365888.1&displayIndex=1&_afrWindowMode=0&_adf.ctrl-state=14ehvbh4z2_61).
"In an OAM Clustered environment, the OAM Principal for WNA must be the same on all tiers i.e. the load-balanced virtualhost for the OAM cluster.
Therefore each OAM managed server will reference the same keytab file, generated for Principal HTTP/<virtualhost.domain>, and the keytab file will be in the same location on all OAM managed servers.
For example: ${DOMAIN_HOME}/domains/${DOMAIN_NAME}/config/fmwconfig/oam/<keytab filename>.
After copying the keytab file to the same directory on all OAM managed server machines, complete the configuration of the Kerberos authentication module in OAM Administration Console (/oamconsole).
The AdminServer will ensure that the oam-config.xml file on all OAM managed server tiers in the cluster is updated with this configuration."
The question is; When I generate oam.keytab with following command, What is the name of the server that I will must put in the command? Virtualhost (load-balanced), Node1 or Node2?
ktpass -princ HTTP/<servername>@DOMAIN -pass XXXXXXX mapuser DOMAIN\user -out oam.keytab.
Thanks in advance and best regards!
PS: Sorry if my english is not clear.

David,
Your Principal name should be the SSO LB URL.(ie :sso.mycomany.com)
ktpass -princ HTTP/sso.mycomany.com@DOMAIN -pass XXXXXXX mapuser DOMAIN\user -out oam.keytab.
Also make sure sso.mycomany.com has a reverse DNS configured correctly.
you can check using dig command
ping sso.mycomany.com
What ever the ip-address
dig -x <IP-ADDRESS>
Check in the reverse DNS section there should be 1 record.
;; ANSWER SECTION:
1.1.1.1.in-addr.arpa. 3600 IN PTR sso.mycomany.com.
Let me know if you have more questions.
Thanks
Saurabh

SiteMinder integration with the internal and external facing portals

Hi ,
We are in development phase for SiteMinder integration with the internal and external facing portals.The proposed dual authentication scheme which requires both SiteMinder for External facing portal (EFP) and LDAP for Internal portal .is it possible?
and is it possible to main to diff LDAP directories one is external users and one is for internal users.?
If you maintain 2 diff(external & internal) LDAP Directories in Siteminder Policy Server what about external users which are not exit in portal data source .
I appreciate if anyone can help me for my above query .
Regards
Tag

Hey Tag,
We do have a physical external Portal and a physical internal portal. The both the external and internal are connected to 2 LDAP directories.
For example the External Portal is connected to the Employee LDAP Direcotry and the Customer LDAP Directory. The Internal Portal is connected to the US Employee LDAP Direcotry and the EMEA LDAP Directory.
So each one of them is connected to 2 different LDAP Directories.
I believe that the Siteminder Policy is setup such that the Internal portal has a policy and the External portal has a seperate policy on the same Siteminder Server. Then each of the Policies is configured to connect to the approiate LDAP Directories.
You have to maintain the LDAP Directory information in both the portal and Siteminder Policy Server. It is required in the policy server so that it can authenticate the user and it is required in the Portal server so that it can authorize the user and display content based on thier assigned roles.
Hope that helps.
Regards,
Keith

Siebel 7.5 Integration with Demantra

Hi All,
Can Siebel 7.5 be integrated with Demantra TPMO ?
Thanks in Advance!!
Appreciate ur help!!!!!!!!!!!!
Thanks&Regards,
Madhu

Hi,
Chk this:
Demantra PTP Integrated with Siebel TPM
Oracle Demantra 7.2.1:
The standard Demantra installation process is used to install Demantra Release 7.2.1
User creation is done through the Demantra Business Modeler utility
Demantra Integration Pack for Siebel CRM Consumer Goods Release 1.0.0.0
The integration pack includes it’s own installer
Pre-Requisites:
Oracle Database version 9i or 10g
Siebel TPM version 7.5 or later
ODI (Oracle Data Integrator) version 10.1.3.4.0 or later
Tks
M J

PPDS integration with DP,SNP and GATP

Hi,
Can anybody provide details for integration of PPDS with DP, SNP and GATP
Thanks
suresh

Hi,
Integration with DP
Transfer of PIRs to PPDS
Integration with SNP
This plan should ensure that the required product quantities in your supply chain are available at the right place, at the right time, without overloading bottleneck resources for production and transportation.
Convert SNP receipts into PPDS Receipts
Integration with GATP
CTP and MATP generate Procurement proposals to PPDS
Thanks
sreeni

BPM 11g integration with UCM11g using Java Enbedded acitivity

Hi Friends,
Can anyone throw some idea how to integration with BPM11g and UCM11g
We need to have a java code using Java Enbedded acitivity.
1) How to Connect to UCM 11g using java code any sample Java Embedded Code( we are connecting through RIDC)
2) How to Fetch the document from UCM using RIDC.
3) How to Close the Connection.
Hi friends,
My requirement was Using BPEL JAva Embedded Acitivity need to connect UCM by RIDC. Got SCAC exception. I could solve this today 3/12/2012... refer below link
Re: SCAC-50012 Got this exception when using BPEL Java Embedded Activity
But I have the actual thing.. as per my post..
Now I need to fetch the doc i.e.,
In UCM we have pdf documents i need to Download that document and show it in ADF UI using Java Embedded Activity.
Ie., Using Java Code I need to Download and Decode the PDF file using Java Embedded Activity after Connection with UCM. Save as a file in Local Machine then I need to Encode ads PDF and Show it to ADF UI.
Please experts its Quite Urgent!!
ThankQ!!
Regards,
Pavan
Edited by: BPM Fresher on Dec 3, 2012 8:12 PM

Hi experts...
Any solution for this.. Can any one help me on this...
Regards,
Pavan

OBIEE 11g integration with sharepoint or any with any other webserver possibilities

HI All,
Can we integrate OBIEE 11g Analysis and dashboards to SharePoint server ? If yes could you help us guiding in right way of implementing this request. Any kind of help on this is highly appreciated.
Can we use existing Weblogic web server to build some internal web applications. (Work flow tools)
Maker checker application:
We have Ops users which they send the daily reports to Traders for approval. Based on the approvals, end of day data will be reload into DB for Month end reporting. Reports are generating from OBIEE 11g.
Thanks,
Pavan

Hi,,
Thanks for your update,
Kindly provide any other document for obiee 11g integration part with Windows active directory
Thanks
Edited by: user11018780 on Feb 9, 2011 7:22 AM

OAM 11g reports with BI publisher 11g

Hi Guys,
I am facing issue while configuring the reports in BI Publisher for 11g while generating report i am getting error
oracle.xdo.XDOException: oracle.xdo.XDOException: oracle.xdo.XDOException: Could not get data source connection for: Audit
i will list down the steps
1. Created a audit database using RCU
2.Created a jdbd data source in weblogic
3. Attach this data source to Audit store in Enterprise manager.
4.deploy the reports in BI publisher
5. created a jdbc data source to point to audit database.
6.Attach this datasource to data modal and then to report. Now when i run the report i am getting this error
oracle.xdo.XDOException: oracle.xdo.XDOException: oracle.xdo.XDOException: Could not get data source connection for: Audit
guys provide me with some pointers.

Hi,
Here is a set of instructions on how to run the OAM 11g reports in BI 11g:
http://oraclemiddlewareblog.com/2012/07/31/how-to-run-oam-11g-audit-reports-in-bi-publisher-11g/
Basically, even if you have created the datasource to the XX_IAU schema, you still need to make sure that you enable the audit on the OAM side and that you configure the right filters for the audited operations.

IPM 11g integration with oracle applications R12

Hi,
We are in process of setting up first IPM instance for AP invoice processing. I installed all required software and got IPM server up and running. I was following installation guide for integration with applications R12 but it is not detailed enough so opened oracle SR and now analyst himself is saying documentation is not enough and you need to use solution accelarator kit. Oracle's product manger is not giving kit before giving training and there is no training in near future so we are just at full stop at this time. Has anybody done successful install and end to end integration with 11g version without solution kit? Can anybody point me to good detailed documentation?
I would appreciate any help I can get on this.
Thanks,
Jigisha

Hi
AP Invoice end to end processing would need to have IPM , EBS , ODC , OFR (if needing to include forms recoginition functionality as well ) .
This is the outline of the architecture that need to be set up for end to end AP processing .
Let me look around if there is any documentation which gives further details on this topic .
Thanks
Srinath

Unity Connection Integration with CS 1000 and Meridian 81 - PIMG

I have a customer who have (2) Nortel Meridian 81 and (1) CS1000 for their 3 locations along with Octal 350 servicing 2500 voicemail users today. Customer also has a Cisco UCM in their network today which is servicing their wireless phone users.
UCM and CS1000 are networked together using Q.Sig trunks today. Customer is looking at replacing their Octal solution with a new Voice mail solution.
I was looking at integration documents for Unity Connection using PIMG.
In this scenario, would I need 3 separate PIMG 's at the three remote sites and integrate it with Unity connection or Can I achieve this using just one PIMG at one of the sites, considering the three sites are trunked together using tie-trunks.
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/7x/integration/pimg/guide/cucintpimg090.html#wp1051831
Appreciate any pointers/ help.

Hi there,
Just to add a note to the great tips from Hailey (+5 Hailey!)
We are in the final stages of replacing our "old" Octel with Unity Connection, part of
which is integrated to our CS1000 and CUCM in a "Hybrid" deployment like yours
Centralized Voice Messaging
Cisco Unity Connection supports centralized voice messaging through the phone system, which supports
various inter-phone system networking protocols including proprietary protocols such as Avaya DCS,
Nortel MCDN, or Siemens CorNet, and standards-based protocols such as QSIG or DPNSS. Note that
centralized voice messaging is a function of the phone system and its inter-phone system networking,
not voice mail. Connection will support centralized voice messaging as long as the phone system and its
inter-phone system networking are properly configured.
Setting Up a Nortel Meridian 1 Digital PIMG
Integration with Cisco Unity Connection
Attachments:
cucwithnortel.pdf (308.1 K)
Centralized voice messaging provides voice messaging services to all users in a networked phone system environment. Connection can be hosted on a message center PINX and provide voice messaging services to all users in an enterprise assuming the message center PINX and all user PINX phone systems are properly networked.For a centralized voice messaging configuration to exist, a suitable inter-phone system networking protocol must exist to deliver a minimum level of feature support, such as:•Message waiting indication (MWI).•Transfer, which ensures that the correct calling/called party ID is delivered to the voice messaging system.•Divert, which ensures that the correct calling/called party ID is delivered to the voice messaging system.Other features may be required depending on how the voice messaging system is to be used. For example, if it is also serving as an automated attendant, path-replacement is needed as this feature prevents calls from hair-pinning.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/design/guide/7xcucdg050.html#wp1053538
Cheers!
Rob

OAM 11g BP02 with Kerberos is not working on AIX

Hi,
We are trying to configure OAM 11g with Kerberos on AIX with no success..
Resource is protected according to OAM documentation guide but the oam logs shows the following:
[2012-08-28T00:03:22.305-05:00] [oam_server1] [TRACE] [] [oracle.oam.engine.authn] [tid: [ACTIVE].ExecuteThread:
'2' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000J_fbCuS9h^k5kzWByZ1GF532
00000G,0] [APP: oam_server] [SRC_METHOD: log] [SRC_CLASS: oracle.security.am.engines.common.adapters.OAMLoggerImp
l] Authentication Failed.[[
javax.security.auth.login.LoginException: Bad JAAS configuration: bad URL /home/oracle/oam.keytab
Error java.net.MalformedURLException: no protocol: /home/oracle/oam.keytab
at com.ibm.security.jgss.i18n.I18NException.throwLoginException(I18NException.java:5)
at com.ibm.security.auth.module.Krb5LoginModule.j(Krb5LoginModule.java:537)
at com.ibm.security.auth.module.Krb5LoginModule.b(Krb5LoginModule.java:146)
at com.ibm.security.auth.module.Krb5LoginModule.login(Krb5LoginModule.java:274)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
we are using OAM 11g BP 02.
oam-config.xml is configured as follow:
<Setting Name="KerberosModules" Type="htf:map">
<Setting Name="6DBSE52C" Type="htf:map">
<Setting Name="keytabfile" Type="xsd:string">/home/oracle/oam.keytab</Setting>
<Setting Name="krbconfigfile" Type="xsd:string">/etc/krb5/krb5.conf</Setting>
<Setting Name="name" Type="xsd:string">Kerberos</Setting>
<Setting Name="principal" Type="xsd:string">HTTP/myssoserver@mydomain</Setting>
</Setting>
</Setting>
Please let me know how to get this resolved. Thanks in advance.
Regards.

David,
Your Principal name should be the SSO LB URL.(ie :sso.mycomany.com)
ktpass -princ HTTP/sso.mycomany.com@DOMAIN -pass XXXXXXX mapuser DOMAIN\user -out oam.keytab.
Also make sure sso.mycomany.com has a reverse DNS configured correctly.
you can check using dig command
ping sso.mycomany.com
What ever the ip-address
dig -x <IP-ADDRESS>
Check in the reverse DNS section there should be 1 record.
;; ANSWER SECTION:
1.1.1.1.in-addr.arpa. 3600 IN PTR sso.mycomany.com.
Let me know if you have more questions.
Thanks
Saurabh

OAM 11g: Deleted IAMSUITEAGENT by accident and now can't login to oamconsole - help!

Hi everyone - I've deleted the IAMSUITEAGENT suite from security realm --> myrealm --> providers within the weblogic OAM admin console (hostname:port/console) and now can't log into the oamconsole (hostname:port/oamconsole). When I enter the username and password into the oamconsole login page, the page just refreshes - is there anything I can do to reinstall it?

"There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact you support personnel or package vendor."
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Portal integration with E-Business and Discoverer 10g

Hello Everyone,
We have a R12 integrated with SSO/OID. We also have a standalone Oracle BI Discoverer 10g. We want to implement Oracle Portal here. One of the requirements of this project is to have a common home page for both E-Business Suite login as well Discoverer access. Right now E-Business Suite login is seperate and Discoverer home page is seperate (because it comes from a Standalone installation)
1) What are the benefits of having AS Portal 10g for end users ?
2) To begin with, we would like to go with the minimum portlets.
3) Is it possible to have a common home page for both E-Biz access and the Discoverer acess after Portal integration ?
4) Do you have some screenshots of how things look after Portal integration
-Thanks
Srinivas

Hi,
take a look in metalink Note:313418.1. :
"Using Discoverer 10.1.2 with Oracle E-Business Suite 11i"
Look in section 6 - post installation.
Follow the steps and have a very good luck.

Oracle 11g compatibility with oracle 10g and 9i?

Hi All
I have some queries on 11g compatibility.
Is oracle 11g client compatible with oracle 10g client which is already installed on desktop?
If yes any changes to be done and where?
Is oracle 11g compatible with oracle 10g/9i on the same server where 10g/9i are installed?
Regards

Thanks Justin Thats right ...
Problem elaboration is as follows
We currently have an application which requires oracle 10g(10.2.0.3) client to connect to database from user desktops. As
part of new application development the oracle 11g clients need to be installed on all the user deskotps.
The complete application software along with oracle client 11g has to be roled out on these desktop as part of
implementaion of new application besides the existing application(The application software is packaged along with oracle
10g client).
We would like to understand if there is any software provided by oracle using which we can switch between different oracle
versions while accessing the respective applications simultaneously. Also are there any known bugs/issues in running
oracle 10g client and oracle 11g client together on the same user desktops with different oracle homes?

Communication Channel - Integrating with existing iMS52 and iDS52

Hi,
Any one tried integrating Portal Server JES2004Q2 channels with existing iMS52 and iDS52?
How about schema? Did you use the existing Dir for configuration? Please share, as at the moment we are encountering problems even installing it. Anyway that's a different story.
Regards,

Use Runtime Workbench -> Component Monitoring -> Communication channel monitoring
U could not start or stop individual communication channel through Visual Admin. U can start or stop whole adapter through it.
Regards,
Prateek

OAM 11g integration with Demantra, VCP and APCC

Similar Messages

Maybe you are looking for