OAM Webgates Browser Dependent?

Hi,
I am getting a recurring error while accessing a web resource with a particular browser. I'm using Safari5.0.5 on Mac OS.
The authentication of web resource is successful but fails to download a particular file after authentication.
This problem is existing only with some users who are successfully authenticated.
I cannot reproduce this error in every Safari Browser.
There is no authentication failure when the user access the resource. The policies looks fine.
I'm doubting, if the webgates have anything to do with it.
Are webgates browser dependent.
I have checked the installed Webgate component browser compatibility and it looks fine.
Any inputs ????

Try setting the following parameters in webgate configuration in admin console:
CachePragmaHeader public
CacheControlHeader public
Hope it helps.

Similar Messages

  • OAM Webgate 10.1.4.2 BP7 installation on RHEL5 2.6.18-92.el5 x86_64 ?

    Hello,
    Is it possible to install OAM Webgate 10.1.4.2.0 Bundle Patch 7 on Linux RHEL5 X86_64 (2.6.12-92.el5 x86_64 ?.
    If yes what is the procedure to follow?
    The “Oracle Identity Management 10g Release 3 (10.1.4.x) Certification Matrix .xls” claims it’s certified but we are not able to complete the installation.
    During the first installation with the 10.1.4.0.1 media (Oracle_Access_Manager10_1_4_0_1_linux_APACHE2_Webgate) the installer said it was unable to configure the WebGate … So we continue anyway apply the Oracle_Access_Manager_10_1_4_2_0_Patch_linux_APACHE2_WebGate patch set and after the Oracle_Access_Manager_10_1_4_2_0_BP07_Patch_linux_APACHE2_WebGate bundle patch.
    After patches application we tried to launch oblix/tools/start_configureWegate but we had a “cannot open shared object file” on libnsl.so.1..
    Commenting the “export LD_ASSUME_KERNEL=2.4.19” allows the tools to be launched but after generating the certificate (simple mode) it stays stuck on “Preparing to connect to Access Server. Please wait”…
    Best regards,
    EDIT:
    After a long time waiting on "Preparing to connect to Access Server. Please wait" the configureWebGate finally returned: "Access Server you specified ins currently down. Pleas check your Access Server"
    Well looking at the Diagnostics in System management console shows the corresponding Access Server up ...
    So I'm afraid it is not possible to make Webgate working on RHEL5 x86_64 :(
    If someone makes it work please tell me !
    Edited by: Laurent_ch1258 on May 22, 2009 4:09 PM

    Hello,
    Thanks Pramod for your advice,
    You were right the first issue was due to a clock difference (I didn't figure out the NTP synchronisation was broken with our RHEL5 64bit test VM)
    Well after correctly configuring clock synchronization with NTP, I run the configurewebgate and successfully configure it :)
    Anyway after configuring my Apache (64bits) to handle the webgage I received the following error when starting it:
    ../oblix/apps/webgate/bin/webgatessl.so: wrong ELF class: ELFCLASS32
    --> webgate.so / webgatessl.so are compiled with 32bits libs
    I tried several time the installation and I'm sure I provided the 64bits libgcc_s.so.1 and libstdc++.so.5 during the initial install... but even before applying the patchs an ldd on webgate.so / webgatessl.so shows they are linked to the 32 bits libs...
    I browse metalink to see if there is a dedicated 64bits patch for BP7 or BP8... but I found nothing
    So I'm still not able to make it works on a RHEL5 64 bits... so I do not see why it is certified in oracle_access_manager_certification_10.1.4_r3_matrix.xls in webgate sheet.
    I will open a call and let you know...
    Best regards,

  • OAM Webgate needed

    Hi All
    I have an OHS server 10.1.3.4 on Aix 5.3 64-bit OS and looking for an OAM webgate to be used with this webserver. Please let me know if you have done this before.
    Thanks

    Hi,
    1) Login to Oracle Edelivery: https://edelivery.oracle.com
    2) Select Product Name as : Oracle Fusion Middleware
    Platform: IBM AIX on Power Systems (64-bit)
    3) Select Oracle Fusion Middleware Identity Management 11g R2 Media Pack
    4) Download Oracle Access Manager WebGates 11.1.2.0.0
    It must be generic(applicable for all types servers)
    Regards,
    Chinni

  • OAM Webgate installation on APache with multiple Virtual hosts?

    Hi I have customer who is having One Single APache web server and having two different applications configured as different Virutal hosts in the single server.
    requirement is , Each application should be protected by OAM Webgate and each application have seperate session configurations. So, How can we handle this ..
    I am thinking to install webgate for each application virutal Host to fulfill this requirement but i am worrying about the Webgate installation since both applications on single Apache server and single httpd.conf file.
    Really appreciated if anyone suggest me the approach of how to fulfil this requirement.
    -Srini
    Edited by: user567398 on Jun 17, 2011 3:00 PM

    Hi Srini,
    You can use a single WebGate - in the "Preferred HTTP Host" setting for the WebGate in the Access System Console, specify SERVER_NAME. OAM will then use the name of the Virtual Host (as returned by Apache) when evaluating policies, and you can have different policies by having different Host Identifiers for the two (or more) virtual hosts.
    Regards,
    Colin

  • OAM-webgate IIS redirect

    Hi,
    We need to setup a redirect on IIS during maintenance work so that anybody accessing our OAM protected website will redirect to a static banner page, which will display a custom message.
    When we try to configure it, we found out that OAM intercept the request first and after authentication it redirects to the static banner page.
    Is there a way via which we can change the order of invocation of OAM-webgate after IIS redirect ? thanks

    Do you mean that you have an authN success redirect that works but then the user can try to go where they want?
    If so, try a authZ rule that captures everyone for everything and sends them to the banner page. You might try setting up a rule with timing conditions so that you can configure it ahead of time and have it kick in just for your work window.
    Of course this all presumes that it is not your OAM system itself that is the subject of the outage...
    Mark

  • OAM webgate for OHS1.3

    Hi All,
    I am installing OAM 10.1.4.3 on linux box. I want to install webgate on OHS1.3, where can I find the dowloand link for OHS1.3.
    Please reply soon, its very urgent.

    Hi,
    As far as I know OAM 10.1.4.3 is compatibile with previous webgates supporting backward compatibility.
    So you can find OAM webgate for OHS 1.3 in this location http://download.oracle.com/otn/linux/ias/101401/as_linux_x86_access_manager_101401_disk1.cpio
    You can find other disks in http://www.oracle.com/technology/software/products/ias/htdocs/101401.html
    Check the Readme file and get that specific disk for OHS 1.3 webgate installer.
    Check this link for certification http://www.oracle.com/technology/software/products/ias/files/oracle%20fusion%20middleware%2011gr1%20(11%201%201%201%200)%20certification%20matrix.xls
    If this is not working, access the http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html and click on System Requirements and Supported Platforms for Oracle Fusion Middleware 11gR1 .
    -Mahendra.

  • Error in Webgate 11g (OAM, Webgate, WebTier)

    Hi,
    I'm setting up the WebGate in Webtier 11g, linux platform, I created a WebGate instance, configured and registered in OAM 11g 11.1.1.5.0
    But the following error occurs in OHS
    Message from syslogd@ at Sat Feb 25 15:37:13 2012 ...
    wlroam15 Oblix: 2012/02/25@17:37:13.17372 7085 7104 ACCESS_GATE FATAL 0x00001520 /ade/aime_h0025/ngamac/src/palantir/webgate2/s rc/apache2entry_web_gate.cpp:591 "Exception thrown during WebGate initialization"
    Can anyone help me
    Thank

    Hi,
    I would usually expect an additional error message giving more information (maybe "Unable to contact any Access Servers" or some other message). But basic things to check are:
    - ensure that the artefacts (ObAccessClient.xml, cwallet.sso if not Open mode) created during Agent registration are copied to the correct location in the WebGate installation directory;
    - if using Simple or Cert mode operation, ensure that the certificate files are also in the correct location, and that the correct transport security has been specified in the Agent definiton in the oamconsole.
    Regards,
    Colin
    Edited by: ColinPurdon on Feb 28, 2012 3:19 PM

  • OAM Webgate - webgate agent point to multiple Access Servers?

    I am trying to find out if it is possible to have a single webgate agent on OHS server point to more than one OAM server.
    We have multiple OAM servers (not clustered) behind a load balancer. When I set up an agent for the OHS server, I copy the cwallet.sso and ObAccessClient.xml from, for example, OAM server 1. The OAM servers are all setup the same.
    It seems the cwallet.sso is tied directly to that OAM server, and if I try to point the OHS to server 2, I get errors. I change the ObAccessClient.xml to the url specified in the load balancer.
    Is it possible to have one set of files (cwallet.cco and ObAccessClient.xml) that would work on different OAM servers?
    thanks in advance.
    Mark

    In that case, the default behaviour is that a WebGate cannot connect to an OAM server in a different installation (different to the one it is registered in).
    However, this functionality is available in a Multi-Data Centre architecture, details of which can be found here: Using Multi-Data Centers - 11g Release 2 (11.1.2.2)
    I think this may meet your requirements?
    Regards,
    Colin

  • OAM - Webgate error

    Hi Guys,
    We are facing a very weird problem in our setup. Our environment includes OHS 11.1.1.6 BP03 with webgate 11.1.2.0.2. The Access Manager is 11.1.2.0.0. The requests between webgate and access server (i.e. protected resources accessed via OHS) works fine for few times. But after 4-5 requests we can see that new request got failed with the status that 'Webgate is unable to contact any Access Server,. Following string is getting recorded in OHS logs
    [ecid: 004qTwWqkB87q2D5NBL6ie0002i30001DD] [rid: 0] [VirtualHost: main] apache2_req_info.cpp:221: The WebGate plug-in is unable to contact any Access Servers.
    AFter this failure the requests agains started working fine (i.e. connections seems restored between webgate and access server). Can anyone please help me what could be wrong in our configuration? There is no error in OAM logs
    Regards,
    Amit Bansal

    Hi,
    We're seeing this exact error/log with a "new" accessgate, so I was wondering if you could clarify exactly what is the problem and what is the resolution?  Are you saying that the webgate is not sending the hostname that's in the ObAccessClient.xml, but, rather, sending the physical IP or hostname of the server that is hosting the webgate/accessgate?
    Also, is this happening with specific versions of webgate/accessgate, because we haven't run across this until this one instance.
    Thanks,
    Jim

  • OAM Webgate Ip validation problem caused by load balancer...

    Hi all,
    In my topology, i have 5 webgates on 5 OHS web servers running in reverse proxy mode . Those web servers are behind load balancer. Since load balancer is working in proxy mode, all requests seems to be coming from load balancer vip and this prevents ip validation at webgate side . Does anybody think that it is possible to solve this issue without changing load balancer configuration..
    Regards,

    Hi,
    Randat, how can i reconfigure ip validation against x-forwarded-for? A custom authz plugin, or only a configuration change ? I'll keep on searching on this solution, but if you can share your solution , it'll be appriciated..
    Ambarishmitra, i want to use ip validation but since all requests are coming from single ip i can't distinguish client ip's, that's my problem..
    Thank you both,
    Regards..

  • My call to open an Oracle Web Form - Browser dependant???

    I call the following URL (HTM file) from Internet Explorer on my Windows XP machine.
    http://9.35.32.205:7777/forms/html/ttmsMenu.htmThis HTM file then automatically logs me in using my PC's environment variables named ORAUSER and ORAPASS.
    <html>
    <body onload="document.menulaunch.submit();">
    Launching TTMS Menu on Production (205)...
    If the menu does not load in 30 seconds then close this window and try again.
    <form name=menulaunch action=http://9.35.32.205:7777/forms/frmservlet?config=ttm
    smenu method=post>
    <script>
    var wshshell=new ActiveXObject("wscript.shell");
    var username=wshshell.ExpandEnvironmentStrings("%orauser%");
    var pw=wshshell.ExpandEnvironmentStrings("%orapass%");
    document.write("<input type=hidden name=userid value="+username+"/"+pw+"@sparc20
    ")</script>
    <input type=submit value=Launch>
    </form>
    </body>
    </html>However, when I call this same URL from FireFox the automatic login functionality does not work. I'm simply presented with the normal Username/Password/Database fields for logon. Why doesn't this same URL work in FireFox? Can I get it to work in FireFox?
    Any help would be greatly appreciated.
    Edited by: Buechler on Mar 29, 2011 11:17 AM

    What is your Forms version (eg; 10.1.2 not 10g), Browser versions and Java Runtime version? More than likely, you are simply dealing with an unsupported method.
    var wshshell=new ActiveXObject("wscript.shell");I'm not a web developer, so I did a quick Google search and found that FireFox does not support ActiveX. You either need to find an ActiveX plug-in for FireFox or you need to use an industry standard method supported by all browser instead of the IE specific ActiveX method.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Urgent! HTML table cell - Flash movie display browser dependent

    Hi all,
    I wonder if anyone has experienced the same problem i have
    (note, Windows XP, Dreamweaver 4).
    Consider the (rough) HTML code attached: A simple HTML table
    of one column and two rows is constructed to hold an image banner
    link and a Flash movie banner link in each cell consecutively.
    The Flash movie works normally when the HTML page is viewed
    in IE and Opera, until that is, it is placed inside a table cell.
    Inside the cell the flash movie seems to disappear, though i
    suspect it collapses to an image 1 pixel in height, as this can
    just about be seen using Opera.
    Is there something that I am missing? The code of course
    seems correct to me - perhaps there is a browser setting i am
    missing?
    Any help apprceiated - as i need to implement this code ..
    Daz

    Hi Alan,
    Dont think that was the problem (percentages used to scale to
    users browser?) ... though you did set me thinking!
    Was tired before, so only just remembered that when i was
    experimenting with setting the Table Properties the image was
    actually occasionally visible!!
    Short version: When formatting a cell containing a Flash
    animation dont leave the H field blank or use % (even though you're
    suppose to be able to!), use pixels instead - otherwise the Flash
    image collapses/disappears. Blank and % are fine everywhere else
    (I did type a long answer before, but it got eaten by the
    forum monster
    Someone/i will probably figure out
    why this is so or maybe i've just rediscovered the wheel
    here - but thats not really important now - because my Flash
    animation now renders similarly across IE, Opera and FireFox !!
    So thanks for your help!
    Daren

  • Browser Dependency when calling a method in backing bean using a javasript.

    Hi all,
    I have a problem which may look simple but bugging me for quite some time.
    The problem is : When I call a method in the backing bean using a Javascript, (the method can alternatively be invoked by clicking on a command link) I am facing an exception (stack printed below).
    The strange part is that...I am getting this exception only when I use Internet Explorer. It works absolutely fine when I use Mozilla or Netscape browsers. Also, even in ie, it is working fine when I click on the link directly. The probem comes only when I invoke the action using a javascript.
    WARN [lifecycle] executePhase(RENDER_RESPONSE 6,com.sun.faces.cont
    ext.FacesContextImpl@16ce9df) threw exception
    javax.faces.FacesException
         at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java
    :135)
         at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:251)
         at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:144)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:245)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Application
    FilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterCh
    ain.java:206)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Application
    FilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterCh
    ain.java:206)
         at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.ja
    va:96)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Application
    FilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterCh
    ain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.ja
    va:230)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.ja
    va:175)
         at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssoci
    ationValve.java:179)
         at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:
    84)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104
         at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnecti
    onValve.java:156)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java
    :109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http
    11Protocol.java:580)
         at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
         at java.lang.Thread.run(Unknown Source)
    Caused by: ClientAbortException: java.net.SocketException: Connection reset by
    peer: socket write error
         at org.apache.catalina.connector.OutputBuffer.realWriteBytes(OutputBuffer.java:
    358)
         at org.apache.tomcat.util.buf.ByteChunk.flushBuffer(ByteChunk.java:434)
         at org.apache.catalina.connector.OutputBuffer.doFlush(OutputBuffer.java:309)
         at org.apache.catalina.connector.OutputBuffer.flush(OutputBuffer.java:288)
         at org.apache.catalina.connector.Response.flushBuffer(Response.java:542)
         at org.apache.catalina.connector.ResponseFacade.flushBuffer(ResponseFacade.java
    :279)
         at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:20
    2)
         at org.ajax4jsf.framework.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java
    :101)
         at org.ajax4jsf.framework.ajax.AjaxViewHandler.renderView(AjaxViewHandler.java:
    222)
         at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java
    :106)
         ... 24 more
    Caused by: java.net.SocketException: Connection reset by peer: socket write erro
    r
         at java.net.SocketOutputStream.socketWrite0(Native Method)
         at java.net.SocketOutputStream.socketWrite(Unknown Source)
         at java.net.SocketOutputStream.write(Unknown Source)
         at org.apache.coyote.http11.InternalOutputBuffer$OutputStreamOutputBuffer.doWri
    te(InternalOutputBuffer.java:764)
         at org.apache.coyote.http11.filters.ChunkedOutputFilter.doWrite(ChunkedOutputFi
    lter.java:124)
         at org.apache.coyote.http11.InternalOutputBuffer.doWrite(InternalOutputBuffer.j
    ava:570)
         at org.apache.coyote.Response.doWrite(Response.java:560)
         at org.apache.catalina.connector.OutputBuffer.realWriteBytes(OutputBuffer.java:
    353)
         ... 33 more
    13:54:42,805 ERROR [STDERR] ClientAbortException: java.net.SocketException: Con
    nection reset by peer: socket write error
    13:54:42,805 ERROR [STDERR]      at org.apache.catalina.connector.OutputBuffer.realW
    riteBytes(OutputBuffer.java:358)
    13:54:42,805 ERROR [STDERR]      at org.apache.tomcat.util.buf.ByteChunk.flushBuffer
    (ByteChunk.java:434)
    13:54:42,805 ERROR [STDERR]      at org.apache.catalina.connector.OutputBuffer.doFlu
    sh(OutputBuffer.java:309)
    13:54:42,805 ERROR [STDERR]      at org.apache.catalina.connector.OutputBuffer.flush
    (OutputBuffer.java:288)
    13:54:42,820 ERROR [STDERR]      at org.apache.catalina.connector.Response.flushBuff
    er(Response.java:542)
    13:54:42,820 ERROR [STDERR]      at org.apache.catalina.connector.ResponseFacade.flu
    shBuffer(ResponseFacade.java:279)
    13:54:42,820 ERROR [STDERR]      at com.sun.faces.application.ViewHandlerImpl.render
    View(ViewHandlerImpl.java:202)
    13:54:42,820 ERROR [STDERR]      at org.ajax4jsf.framework.ViewHandlerWrapper.render
    View(ViewHandlerWrapper.java:101)
    13:54:42,820 ERROR [STDERR]      at org.ajax4jsf.framework.ajax.AjaxViewHandler.rend
    erView(AjaxViewHandler.java:222)
    13:54:42,820 ERROR [STDERR]      at com.sun.faces.lifecycle.RenderResponsePhase.exec
    ute(RenderResponsePhase.java:106)
    13:54:42,820 ERROR [STDERR]      at com.sun.faces.lifecycle.LifecycleImpl.phase(Life
    cycleImpl.java:251)
    13:54:42,820 ERROR [STDERR]      at com.sun.faces.lifecycle.LifecycleImpl.render(Lif
    ecycleImpl.java:144)
    13:54:42,820 ERROR [STDERR]      at javax.faces.webapp.FacesServlet.service(FacesSer
    vlet.java:245)
    13:54:42,820 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.
    internalDoFilter(ApplicationFilterChain.java:290)
    13:54:42,820 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.
    doFilter(ApplicationFilterChain.java:206)
    13:54:42,820 ERROR [STDERR]      at com.hds.vc.common.infrastructure.AIMFilter.doFil
    ter(AIMFilter.java:27)
    13:54:42,820 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.
    internalDoFilter(ApplicationFilterChain.java:235)
    13:54:42,820 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.
    doFilter(ApplicationFilterChain.java:206)
    13:54:42,820 ERROR [STDERR]      at org.jboss.web.tomcat.filters.ReplyHeaderFilter.d
    oFilter(ReplyHeaderFilter.java:96)
    13:54:42,820 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.
    internalDoFilter(ApplicationFilterChain.java:235)
    13:54:42,820 ERROR [STDERR]      at org.apache.catalina.core.ApplicationFilterChain.
    doFilter(ApplicationFilterChain.java:206)
    13:54:42,820 ERROR [STDERR]      at org.apache.catalina.core.StandardWrapperValve.in
    voke(StandardWrapperValve.java:230)
    13:54:42,820 ERROR [STDERR]      at org.apache.catalina.core.StandardContextValve.in
    voke(StandardContextValve.java:175)
    13:54:42,820 ERROR [STDERR]      at org.jboss.web.tomcat.security.SecurityAssociatio
    nValve.invoke(SecurityAssociationValve.java:179)
    13:54:42,820 ERROR [STDERR]      at org.jboss.web.tomcat.security.JaccContextValve.i
    nvoke(JaccContextValve.java:84)
    13:54:42,820 ERROR [STDERR]      at org.apache.catalina.core.StandardHostValve.invok
    e(StandardHostValve.java:128)
    13:54:42,820 ERROR [STDERR]      at org.apache.catalina.valves.ErrorReportValve.invo
    ke(ErrorReportValve.java:104)
    13:54:42,820 ERROR [STDERR]      at org.jboss.web.tomcat.service.jca.CachedConnectio
    nValve.invoke(CachedConnectionValve.java:156)
    13:54:42,820 ERROR [STDERR]      at org.apache.catalina.core.StandardEngineValve.inv
    oke(StandardEngineValve.java:109)
    13:54:42,820 ERROR [STDERR]      at org.apache.catalina.connector.CoyoteAdapter.serv
    ice(CoyoteAdapter.java:241)
    13:54:42,820 ERROR [STDERR]      at org.apache.coyote.http11.Http11Processor.process
    (Http11Processor.java:844)
    13:54:42,820 ERROR [STDERR]      at org.apache.coyote.http11.Http11Protocol$Http11Co
    nnectionHandler.process(Http11Protocol.java:580)
    13:54:42,820 ERROR [STDERR]      at org.apache.tomcat.util.net.JIoEndpoint$Worker.ru
    n(JIoEndpoint.java:447)
    13:54:42,820 ERROR [STDERR]      at java.lang.Thread.run(Unknown Source)
    13:54:42,820 ERROR [STDERR] Caused by: java.net.SocketException: Connection rese
    t by peer: socket write error
    13:54:42,820 ERROR [STDERR]      at java.net.SocketOutputStream.socketWrite0(Native
    Method)
    13:54:42,820 ERROR [STDERR]      at java.net.SocketOutputStream.socketWrite(Unknown
    Source)
    13:54:42,820 ERROR [STDERR]      at java.net.SocketOutputStream.write(Unknown Source
    13:54:42,820 ERROR [STDERR]      at org.apache.coyote.http11.InternalOutputBuffer$Ou
    tputStreamOutputBuffer.doWrite(InternalOutputBuffer.java:764)
    13:54:42,820 ERROR [STDERR]      at org.apache.coyote.http11.filters.ChunkedOutputFi
    lter.doWrite(ChunkedOutputFilter.java:124)
    13:54:42,820 ERROR [STDERR]      at org.apache.coyote.http11.InternalOutputBuffer.do
    Write(InternalOutputBuffer.java:570)
    13:54:42,820 ERROR [STDERR]      at org.apache.coyote.Response.doWrite(Response.java
    :560)
    13:54:42,820 ERROR [STDERR]      at org.apache.catalina.connector.OutputBuffer.realW
    riteBytes(OutputBuffer.java:353)
    13:54:42,820 ERROR [STDERR]      ... 33 more
    Please throw some light on this issue.

    This is the Java script I am using
    function submitForm(e){
         var characterCode
         if(e && e.which){
         e = e
         characterCode = e.which
         }else{
         e = event                    characterCode = e.keyCode
         if (characterCode== 13){
         document.getElementById('mainform:submitForm:search').onclick();
    Regards,
    Jagadeesh
    Edited by: Jagadeesh.Pala on Oct 1, 2007 3:59 AM

  • How to install and configure Oracle Trafic Director and OAM webgate ( Doc ID 1906445.1 )

    Anybody knew, why i can  not access this document? I am in the middle of project implementation, and Oracle support direct me to this document, but for some reason, can not find it.

    Ok so I went and copied the image directory to both WLS servers in the correct directory that was dictated when creating the image war (i.war). Seems to work.
    Thx,
    Russ

  • OAM 101 - Using Windows login?

    I'm very much a newb and am still trying to get the OIM(user provisioning) part of the equation going right now.
    But eventually I'll probably need to hook OAM into it. I understand that OAM is essentially WebSSO (opposed to eSSO), but how can one use the Windows authentication (AD \ Kerberos) and use that to authenticate the WebApps? My assumption is that the kerberos ticket (session) is initiated via the windows desktop login and OAM can authenticate against AD anyway, so as long as I can say that my webapps are only accessible internally (within the firewall), I would like to NOT require the user to have to re-login (but still authenticate using that Win login). At a very "high level" (overused mgmt term) what is the flow of implementing this & the corresponding OAM components\concepts. Not sure if it matters but webapps are java\flex based for the most part - not portals though. I realize that it's probably an intricate solution, but any insight is appreciated.
    ** I understand how essentially eSSO solutions work with scripts\templates & "trapping" login prompts, but am interested to hear a pure OAM solution.

    For information on OAM IWA, read:
    Metalink Note 314951.1: How Does Integrated Windows Authentication and Single Sign On Work?
    Step for your implementation:
    - Build an IIS server with a webgate and configure it for Integrated Windows Authentication. This will be the central authentication webgate:
    Metalink Note 361312.1: How To Setup Integrated Windows Authentication (IWA) as an Authentication WebGate
    - Configure OIM to be protected by OAM WebGate. Make sure Form Login is working correctly:
    http://download.oracle.com/docs/cd/E10391_01/doc.910/e10361/oamsso.htm#sthref75
    - In the OIM (Form) Authentication Scheme, configure a 'Challenge Redirect' to the IIS server. This will take care of valid Windows users who are logging in through IE browser.
    - For invalid user or non-IE browser, the user will be faced with a pop-up window to enter his credentials. You can make use of this for login.
    - If this pop-up window is not acceptable to the customer, then on the same IIS, write an IIS filter for the following function: If the windows user is invalid or the user is using a non-IE browser, then redirect to custom OIM Form Login.
    Another article worth exploring is:
    Metalink Note 395244.1: How to Revert to Form Based Authentication if Integrated Windows Authentication (IWA) Authentication Failed
    -shetty2k

Maybe you are looking for