OAS 10g and ADF

Does Oracle Application Server 10g come with the ADF (Oracle Application Development Framework)?
If so, which editions? (Standard One, Standard, and Enterprise)
Thanks to help.
Scott

Hi,
OracleAs 10g (9.0.4)and above has ADF runtime libraries installed. If you don't find the ADF runtime libraries installed, use the runtime installer in Oracle JDeveloper to install it.
Frank

Similar Messages

What are the differences between oracle adf 10g and adf 11g

Could you please let me know what are the diff b/w oracle adf 10g and 11g, i tried in many user guides but i could not find it.
Thanks in advance,
Poli Reddy P

893771 wrote:
Hi all,
I would like to know what the differences between Oracle and other NoSQL database are.
When and why should we use Oracle?I suggest that you start here:
http://www.oracle.com/technetwork/database/nosqldb/overview/index.html
Is Oracle NoSQL database link with Big Data Appliance?Yes, Oracle NoSQL Database will be a component of the Big Data Appliance.
Can we use map-reduce on a single personal computer? How should we install Oracle NoSQL database to use map reduce on a single personal computer?Yes, I believe you can run M/R on a single computer. Consult the various pieces of documentation available on the web. You may run Oracle NoSQL Database on the same computer that you are running M/R on, but it is likely that they will compete for CPU and IO resources and therefore performance may suffer.
Do we also have eventual consistency with Oracle NoSQL database? Yes.
Can we lose data if master node fails?If you run Oracle NoSQL Database with the default (recommended) durability settings, then if the master fails, a new one will be elected and data is not lost.
Are transactions ACID with Oracle NoSQL database? How can we prove it?Yes, each operation is executed in an ACID transaction. The API has the concept of "multi" operations which allow the caller to perform multiple operations on sets of records with the same major key, but different minor keys. Those operations are also performed within a transaction.
Charles Lamb

[SOLVED]JDeveloper 10g and ADF: How to create proxy from WSDL behind SSL?

Hi all,
I have successfully created web service proxies using the "Create Web Service Proxy" wizard. However, when I attempt to generate proxy from a wsdl file behind a ssl connection, JDeveloper throws a "SSLHandshakeException". I have a working java keystore file which was verified by using the soapUI tool. Within the soapUI tool, there is a "SSL Settings" preference tab which allows me to point to a *.jks file/password. I tried looking for a similar setting in JDeveloper preference with no luck. Is anyone familiar with this type of request?
Many thanks,
Wes
Edited by: Wes Fang on Sep 21, 2010 10:25 AM

add certificate to java keystore with something similar to the following:
C:\jdev10134\jdk\jre\lib\security>keytool -import -trustcacerts -file MYCERTIFICATE.cer -alias MYCERTIFICATEALIAS -keystore cacerts
Enter keystore password: *******
Certificate already exists in system-wide CA keystore under alias <MYCERTIFICATEALIAS>
Do you still want to add it to your own keystore? [no]: yes
Certificate was added to keystore
The reason it said certificate already exist is because I also added it to the JAVA_HOME\ path.
I restarted jdeveloper and used the proxy generation wizard again, everything worked fine.

OAS 10g and connecting to MySql

Hi. Is it possible to have an application on Oracle Application Server 10g (10.1.3.5.0) connected to MySql database?
I tried to set up JDBC data source (I copied a MySql connector into home\lib directory), but my attempts always end with error:
An error has occurred.
Error invoking method: createNativeDataSource on MBean: oc4j:j2eeType=J2EEApplication,name=default,J2EEServer=standalone
Do you have any experience with this? Is it possible at all ?
Thanks.

Hi Jnejedly,
When you say that you copied a MySql connector into home\lib directory I think you refer to the %ORACLE_HOME%/j2ee/home/applib directory, which would be fine.
The error message seems to indicate that you have not created a native data source. You can use the Application Server Console to create a native data source as follows:
jndi-name="jdbc/MyDS"
description="Native DataSource" data-source-class="com.mysql.jdbc.jdbc2.optional.MysqlDataSource"
user="user"
password="password"
url="jdbc:mysql://localhost:3306/mydatabase">
Hope it helps.
Thanks,
Cris

Migration from OAS 10g to Weblogic 10.3

Hello,
I migrate large app from OAS 10g to Weblogic 10.3.
1.
The main part of the job was to prepare descriptors for Weblogic. Unfortunatelly I don't find any tool that could do the job:( There are some problems with descriptors namespaces. This schema and namespaces given in 10.3 docs are not working (not available):
http://edocs.bea.com/wls/docs103/ejb/DD_defs_reference.html
So I use the one from 10 release in weblogic-ejb-jar.xml:
weblogic-ejb-jar xmlns="http://www.bea.com/ns/weblogic/10.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/10.0 http://www.bea.com/ns/weblogic/10.0/weblogic-ejb-jar.xsd">
and form 9 release in weblogic-cmp-rdbms-jar.xml:
<weblogic-rdbms-jar xmlns="http://www.bea.com/ns/weblogic/90" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-rdbms20-persistence.xsd">
There are also some bugs in docs about ejb relations.
After fixing some schema compliance exc this step success.
2. Next the EJBComplianceChecker - its much more restrictive than OAS verification. So updates in ejb interfaces are necessary. It is not a problem with small app but when there ale a lot of code/branches to migrate it's become a problem. I have been looking for some switch that could help with this but with no result/
EJBComplianceChecker - Spec veryfication level
3. Now after EJB compliance checker done its job with success I have an exception that I do not understand:
An error occurred during activation of changes, please see the log for details.
Exception
preparing module: EJBModule(corpo_ejb.jar)
Unable to deploy EJB: corpo_ejb.jar from corpo_ejb.jar:
There are 1 nested errors:
java.io.IOException: JDT compilation error! at
weblogic.ejb.container.ejbc.CompilerForJDT.compile(CompilerForJDT.java:66)
at
weblogic.ejb.container.ejbc.EJBCompiler.doCompile(EJBCompiler.java:357)
at
JDT compilation error!
Could you please give me some point where the problem could be? I don't have any idea where to start looking for..
What are your experiences with migrations from OAS to Weblogic 10?
Thanks in advance!
Edited by: Stoigniew Sztank on Oct 10, 2008 4:00 AM
Edited by: Stoigniew Sztank on Oct 10, 2008 4:01 AM
Edited by: Stoigniew Sztank on Oct 10, 2008 4:02 AM
Edited by: Stoigniew Sztank on Oct 10, 2008 4:04 AM
Edited by: Stoigniew Sztank on Oct 10, 2008 8:05 AM

Hi Stoigniew Sztank,
I am working on migrating Enterpirse application developed using Struts, Ejb2.0, JMS. Its been deployed on OAS 10G and Websphere, but I need to deploy the application on Weblogic 10.3. It seems you have migrated a J2ee application from OAS 10G to Weblogic 10.3. Please can you list me the steps that you followed to migrate the application.
As per my understanding follwing things needsto be taken care of:-
1) Weblogic Descriptor files:
1.1 Weblogic.xml:- we added security roles and ejb-reference-description for the ejbs.
1.2 Weblogic-ejb-jar.xml for all the ejbs used in the application.
1.3 Weblogic-application.xml
1.4 Resource Adapter
2) JMS queue set up
3) JDBC set up
It would be a great help if you can let me know what are the steps to migrate the application.
Thanks and Regards
Deepak Dani

OAS's application migrates 4.0.8 to the OAS 10G

I am trying to migrate an application that runs in 4.0.8 to the OAS 10G, and i want to know if you know if some procedure for best practice for do this.

Hi,
What kind of applications are you running?
4.0.8 is quite old. The documented approach would be to go 4.0.8 > 1.0.2.2.2 > 9.0.2.3 > 10.1.2.0.2, which does not sound to tempting to me at least.
Regards,
Mathias

OAS 10g vs IBM WAS6

Hi
I'm looking for a paper on the comparison between OAS 10g and IBM WAS 6.
Do you kow where i could find ti ?
Regards
Moosy

Hello,
I'm sure you've already "googled" on this and potentially have found some information. I've always found the Reviews section of TheServerSide very helpful. I didn't dig around on there for you, but I'm sure you can find some independent research on there and also comparisons.
If you have any specific questions I could try to answer them as I have experience in both, although my WAS experience is getting old.

How to execute a procedure on OAS 10g release 3

Hi,
1 - I installed OAS 10G, and Oracle 10g, but I don´t know what the path to execute a html procedure(htp.p('hi')...etc), the installer say that Oracle HTTP Server was installed in http://server:80/, but I try and I have a page not found...
Tks.

How I make sure that I can access static HTML??
I read the documentation and created dad but not yet he functions, now I receive the message
Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Oracle-Application-Server-10g/10.1.3.0.0 Oracle-HTTP-Server Server at araga Port 80
this is the dad
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
<Location /plsqlapp>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername scott
PlsqlDatabasePassword tiger1
PlsqlDatabaseConnectString orcl
PlsqlAuthenticationMode SingleSignOn
PlsqlDefaultPage scott.home
PlsqlDocumentTablename scott.wwdoc_document
PlsqlDocumentPath docs
PlsqlDocumentProcedure scott.wwdoc_process.process_download
</Location>
What´s still wrong
if a try tnsping orcl, its ok.

Migration of Enterprise application (J2EE) from OAS 10G to WebLogic

Hi Group,
I am working on migrating Enterpirse application developed using Struts, Ejb2.0, JMS. Its been deployed on OAS 10G and Websphere, but I need to deploy the application on Weblogic 10.3. Please can you list me the steps that needs to be followed to migrate the application.
As per my understanding follwing things needsto be taken care of:-
1) Weblogic Descriptor files:
1.1 Weblogic.xml:- we added security roles and ejb-reference-description for the ejbs.
1.2 Weblogic-ejb-jar.xml for all the ejbs used in the application.
1.3 Weblogic-application.xml
1.4 Resource Adapter
2) JMS queue set up
3) JDBC set up
It would be a great help if you can let me know what are the steps to migrate the application.
Thanks and Regards
Deepak Dani

I suppose this paper is Oracle internal only at the moment.
If you have the option, try JDev 11g and setup all the JDBC and JMS stuff in it.
--olaf

JDEV 1013 and deployment to OAS 10g (9.0.4)

Hi,
I have read that OAS 10g (9.0.4) is not supported by Jdeveloper 1013.
Is that mean that I can't deploy an ADF/JSF application to the OAS 10g (9.0.4)?
Regards,
Cezary

Hi,
yes and no. What it means is that you can't directly deploy from JDeveloper to this Application Server. Building J2EE 1.3 compliant applications and deploy the EAR file to OracleAs 9.0.4 should work. Note that if using ADF I am not so sure if there are issues when deploying the ADF runtime libraries.
Frank

Reports Graphics and OAS 10g

I made a report with a pie char in developer 10g, it runs OK and i see the char in my desktop. When I execute the report (.rep) in OAS 10g (Forms a Reports Services) via the rwservlet, the resulting PDF file contains everything but the chart doesn't appears (white page). Is there any kind of configuration I need to adjust?

Hi,
This is strange. There is no additional configuration needed for charts. If your reports are running fine, it means you should be able to get charts in the output. Does the same problem reproduce if you change the output format from PDF to HTML or HTMLCSS?
Navneet.

Where can I find and download OAS 10g R1?

I'm looking for OAS 10g R1, but I can't seem to find it.

Start at otn.oracle.com/products/ias - and go to the download links - it could be that version of the application server is now desupported (and so removed).
Regards
Grant

How to add a java option in oas 10g 9.0.4?

I need add a java option in my oas 10g...
I have an application implemented with jdeveloper 10g (10.1.2) and its need to use other jdbc libraries acording:
http://radio.weblogs.com/0118231/stories/2005/05/27/workaroundForDeployingAdf1012AppUsingIntermediaDomainsToOracleAs904.html
Using EnterpriseManager, i add a java option for the OC4J instance where my ADF 10.1.2-based application will be deployed:
[b]-Xbootclasspath/p: C:\oracle\infra\jdbc-10.1.0.4\ojdbc14.jar;C:\oracle\infra\jdbc-10.1.0.4\orai18n.jar
but now, ths oc4j instance dont init
...my opmn.xml file contains:
<process-type id="ADF_050615" module-id="OC4J">
<module-data>
<category id="start-parameters">
<data id="java-options" value="-server -Xrs -Djava.security.policy=C:\oracle\infra\j2ee\ADF_050615\config\java2.policy -Djava.awt.headless=true
 -Xbootclasspath/p: C:\oracle\infra\jdbc-10.1.0.4\ojdbc14.jar;C:\oracle\infra\jdbc-10.1.0.4\orai18n.jar"
 />
<data id="oc4j-options" value="-properties"/>
</category>
<category id="stop-parameters">
<data id="java-options" value="-Djava.security.policy=C:\oracle\infra\j2ee\ADF_050615\config\java2.policy -Djava.awt.headless=true"/>
</category>
</module-data>
</process-type>
Help me please

Rigoberto, there should be no space between "-Xbootclasspath/p:" and the path "C:\oracle\infra\jdbc-10.1.0.4\ojdbc14.jar;C:\oracle\infra\jdbc-10.1.0.4\orai18n.jar"
By the way, one can always take a look at the logs at
 $ORACLE_HOME/opmn/logs
especially those files whose names start with OC4J~ if there is some wrong with oc4j processes. Those files are the default oc4j stout and sterr. If oc4j can not init, there should be some kind of error message in them.
By the way, the following line may be deleted since no property file is specified.
 <data id="oc4j-options" value="-properties"/>
Hope this helps.

Weblogic 10.3.2 as a replacement of OAS 10g full of Oracle Forms

hello, quick question: Can I take a entire system in Oracle Forms with OAS 10g technology and deploy them on a Weblogic 10.3.2 as an upgrade/replacement option ?
Can weblogic run Oracle forms out of the box or is there a vendor lock-in trick ?
Thanks in advance,
fabio

Out of the box, WLS is not able to run Oracle Forms.
At the time of this writing, for a complete replacement you need the following components:
- WLS 10.3.2
- OFM 11g Forms
(optional for single sign-on)
- OFM 11g OID
- AS 10.1.4 OID DAS and mod_osso
HTH,
--olaf

Can I set classpath for OAS 10g?

Hi, 
 
I have OAS on my workstation. Here are the details. 
Server : Oracle Application Server 10g Release 3 
Version : 10.1.3.1.0 SOA4 
Build : 061008.0900.00025 
Platform : Windows XP - SP2 
 
I want to set an explicit classpath for complete OAS 10g as such and not to an individual oc4j application. Will I be able to do it? 
I saw the System Properties after my server started. 
It has a name-value pair as "java.class.path oc4j.jar". 
So, I assume all my classpath settings (done thru Environment Variables from My Computer) are lost.? I want to set it explicitly during the server startup itself. Can I do that? 
I tried setting below in the opmn.xml 
<process-set id="ASG" numprocs="1"> 
<module-data> <category id="start-parameters"> <data id="start-executable" value="C:\Oracle\product\10.1.3.1\OracleAS_1\jdk\bin\java"/> <data id="start-args" value="-classpath C:\abc\properties\"/> 
I appended my properties folder after all the jar files present in that tag. 
But its not loading any of my properties files. 
 
Can someone please help me out. 
 
Regards, 
 
Prashanth Babu.

No, the iPad does not support multiple user accounts or preferences.

OAS 10g and ADF

Similar Messages

Maybe you are looking for