OAS 4.0.8.1 - more wrksf problems?
Running OAS 4.0.8.1 on Redhat 6.1 (kernel 2.2.14-32)
There seems to be alot of discussion regarding the "wrksf" service in the latest release of OAS (4.0.8.1). I'm also having trouble getting the "Cartridge Service Factory" to start properly.
I use the OAS manager to start, with the following results:
Please wait while the command is being processed on host dev ...
Starting ORB process...
waiting for ORB to be ready...
The command completed successfully on host dev.
OWS-08821: oassrv process 'oassrv' is started up at pid 6326.
OWS-08820: Unable to start wrksf process '/usr/local/oracle/ows/4.0/bin/wrksf'.
Initialization Failure- Exiting OAS...
Execute STOP of all the OAS Processes from the OAS Manager
I get the same results if I attempt to start from the command line with owsctl:
Please wait while the command is being processed on host dev ...
Starting ORB process...
waiting for ORB to be ready...
The command completed successfully on host dev.
oassrv: Starting wrb service 0
ConfigProvider Server accepting requests...
oassrv: Starting wrb service 1
Log Server is accepting requests now...
oassrv: Starting wrb service 2
Web Request Broker (Version: RM 4.0.8 Linux 2.2.12 #5 SMP Thu Oct 14 10:20:28 PDT 1999 01/14/00 16:31:51):
Accepting requests.
oassrv: Starting wrb service 3
The WRB Authentication Host Server is now running.
oassrv: Starting wrb service 4
The WRB Authentication Engine is now running.
oassrv: Starting wrb service 5
Web Request Resource Manager Proxy is accepting requests.
oassrv: Starting wrb service 6
Initializing wrbmon ..........
oassrv is accepting requests
OWS-08821: oassrv process 'oassrv' is started up at pid 6508.
OWS-08820: Unable to start wrksf process '/usr/local/oracle/ows/4.0/bin/wrksf'.
Initialization Failure- Exiting OAS...
Execute STOP of all the OAS Processes from the OAS Manager
I have used the OAS 4.0.7 on Redhat 5.2 successfully with very few problems, but we would like to be able to use OAS on Redhat 6.1.
Has anyone else experienced this problem? If so, are there any know solutions or workarounds?
null
My experience with wrksf, on Mandrake 7.0 (RH 6.1+) is that wrksf starts at first, then bails after about a second.
I have a couple cartridges installed, C and Perl, and it starts those cartridges up and then fails. I don't get the same error message that you do, but there is an error in the wrb.log:
`OWS-10911: Throwing exception for reason: wrkpGetProperty 2 `
`OWS-04793: Operation oracle_OAS_System_CartridgeServerFactory_create_nwreturns exception IDL:omg.org/CORBA/UNKNOWN:1.0 `
I'm not sure what this is all about, but it does start up my cartridges at first, because I specified a mininum number to start up initially, and a minimum number of instances.
They just don't come back if terminated, since wrksf isn't there.
BTW, this is the same error I encountered when, on NT, I compiled a c cartridge with Metroworks CodeWarrior instead of MS Visual C++ v6.0. So I wonder if this has something to do with compiler incompatibility, if wrksf was compiled with a different compiler from the rest of OAS. While compilers don't usually matter for C, they do for C++, and all binaries and libraries must be compiled with the same compiler/linker to work together.
Just a stab in the dark.
rob
Similar Messages
-
Hi:
I have a J2EE application using Connection Pool and JDBC.
I am using Weblogic 6.1 and JDK 1.3.1.
I am running into a 'No More Resource' problem. I did some debugging and think the cause is due to all my 80 database connections are used up so no new connection is available. But all the 80 connections shouldn't be used up because I did the statement.close() and rs.close() in the finally{} statement in all my DAO methods. But it seems like the connections are not released back to the free pool.
I thought I read something that I might need to do a conn.close() too in order for the connections to be returned to the pool and marked as available. Don't the statement.close() do that? Thanks for any help!
StellaAny resolution on this? We're getting the same problem - using weblogic 6.1 and jdk131. We should never reach the max # of connections specified in the pool but periodically we do. Scraped through all the code and confirmed that for every connection we call ResultSet.close; Statement.close; Connection.Close in the finally block of the try/catch statements. But we still periodically reach the max. It's sporadic so we can't reproduce. Also, after we get the error and we check the weblogic console, we see the # of active connections drop back down below the max capacity (we have shrinking turned on). Any ideas?
thx.
--S. -
As jato2 still doesn't know about some HTML4 tags like <label>
ex:
<label><input type="radio" ... />TheLabel</label>
if you click on "TheLabel", it clicks on the radio button, like every
other GUI
I thought I would be able use the <label for=""> as a workaround
<input type="radio" name="choice" id="choice1" /> <label
for="choice1">TheLabel</label>
BUT despite it generates several tags, <jato:radioButtons> sets the id
attribute to the same value for every tag :< This not only defeats my
workaround but also id main purpose to uniquely identity elements.
We really need a generic mechanism to specify attributes when jato tags
generate multiple HTML tags.
I can still change the generated tags in endDisplay but it be neat if
the 201 taglib was a little bit more XHTML compliant and savvy ;)
Fr?d?ric
ps: release this part of the source code and we'll do it !Give me until monday and I'll have what you "ask" for (WML/XHTML
Basic/Mobile as well as ViewBean).
Following Todd advices,
for the former, I am having new tags to render the same components. I
may need to write new components but I'm not sure yet.
for the latter, 1 pagelet per "rendering" type with an inner
ContainerView when the logic is different ; the pagelet tags being
surrounded by a homemade tag that "activates" the pagelet based on the
client type. A specialized tag seems better than <jato:content> as the
logic is wired.
Further step would be to make the tags client aware but I'm not sure
yet it is the right thing to do. Are tags "allowed" to store data in
the session (to avoid computing client type ever and ever) ?
Fr?d?ric
PS: James Baty will confirm I'm not cheap ;?)
On mercredi, nov 13, 2002, at 21:11 Europe/Paris, Craig V. Conover
wrote:
Fr?d?ric
Is there anyway that we could talk with you about your WML efforts with
JATO?
I would love to get a sample WML app to show the world. And then have a
WML/HTML app to show multiple clients using the same ViewBeans.
craig
Fr?d?ric Miserey wrote:
On mercredi, nov 13, 2002, at 13:34 Europe/Paris, Todd Fast wrote:
Fr?d?ric--
Thanks for the info; I will look into a way of doing something
about
this.
However, please keep in mind that you can write your own complementary
tags
to render JATO components any way you like (or write JATO components
that
render themselves any way you like), and this is expected to be a
normal, if
infrequent, part of writing JATO 2.0 components.That's what I'm doing right now for the WML tags. But I was planning on
using the standard tags for mainstream HTML ;)
May you elaborate a little bit on complementary tags vs components ?
(first part of the suggested thread.
Until the 2.0 taglib is documented, you can use the 1.2.1 JATO
source
to
guide this effort.? It's actually pretty easy, but you will need the
source
to guide you without docs to that effect.? You can download the JATO
1.2.1
source, free of charge, etc. here:
???? http://iplanet.com/downloads/developer/5102.html
(If that doesn't work, just do a search for "JATO" on sun.com).? We
can also
start a tag-writing thread here if you like.
I would love to get your perspective on any XHTML shortcomings of the
current tag library.? Can you plase send your thoughts, list of
issues, etc.
to jatoteam@e...?you don't know what you've just asked ;)
Todd
----- Original Message -----
From: "Fr?d?ric Miserey" <frederic@n...>
Sent: Tuesday, November 12, 2002 8:35 AM
Subject: [SunONE-JATO] yet more TagLibs problems
As jato2 still doesn't know about some HTML4 tags like <label>
ex:
<label><input type="radio" ... />TheLabel</label>
if you click on "TheLabel", it clicks on the radio button, like
every
other GUI
I thought I would be able use the <label for="">? as a workaround
<input type="radio" name="choice" id="choice1" /> <label
for="choice1">TheLabel</label>
BUT despite it generates several tags, <jato:radioButtons> sets the id
attribute to the same value for every tag :< This not only defeats my
workaround but also id main purpose to uniquely identity elements.
We really need a generic mechanism to specify attributes when jato tags
generate multiple HTML tags.
I can still change the generated tags in endDisplay but it be neat if
the 201 taglib was a little bit more XHTML compliant and savvy ;)
Fr?d?ric
ps: release this part of the source code and we'll do it !
[Non-text portions of this message have been removed] -
OAS 4.0.8.1/Redhat 6.2? WRKSF problem
Hi, I've installed OAS 4.0.8.1 on Redhat 6.2 but when I start the processes up the WRKSF goes down after a few seconds, I've seen a previous posting on this subject had a workaround proposed by Dennis Irwin which seemed to work for many people, unfortunately it didn't for me, I've spoken to Oracle about this problem but all they say is OAS 4.0.8.1 isn't supported for the 2.2.14 kernel in Redhat 6.2, 4.0.8.2 will be but they can't say when it will be released, until then OAS is basically useless for me, has anyone any suggestions?. Thanks, Geoff
nullAccording to ORACLE representatives, OAS 4.0.8 isn't their major priority : since Oracle iAS will be available in few days, and many less CPY and memory hungry as OAS, can't you wait a bit longer ?
An other point is that oas 4.0.8.2 will probably be one on their last release of this product ...
Take a look at the oracle iAS white paper, the product will be more reliable and standard : essentialy based on Apache 1.3.12, mod_java, mod_pl and JServ 1.1, and Oracle 8i Cache...
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Geoff Surgenor:
Hi, I've installed OAS 4.0.8.1 on Redhat 6.2 but when I start the processes up the WRKSF goes down after a few seconds, I've seen a previous posting on this subject had a workaround proposed by Dennis Irwin which seemed to work for many people, unfortunately it didn't for me, I've spoken to Oracle about this problem but all they say is OAS 4.0.8.1 isn't supported for the 2.2.14 kernel in Redhat 6.2, 4.0.8.2 will be but they can't say when it will be released, until then OAS is basically useless for me, has anyone any suggestions?. Thanks, Geoff<HR></BLOCKQUOTE>
null -
One more time - problems with fans
I realize this is but one of hundreds or possibly thousands of cases of Mac users being plagued by fan noise problems, but to me it has been a long and extremely frustrating saga. I have been a Mac user since the very beginning, through different versions of Macs and iMacs, and this is the first time I ever refer to a Macintosh as a "piece of junk."
I bought my iMac G5 in August 2005, a 20-inch ALS with 250 GB hard drive and 512 MB RAM. It worked perfectly until January this year, when all of sudden it shut down by itself. Freaked me out completely. Turned out to be power supply problem (EMC 2056) which Apple never informed me about.
I brought it to a repair shop that fixed the intermittent shut-down problem. I also added 1GB memory. But then the fans started to go berserk. Before the power supply problem, I only heard the fans whenever I used a large program like Photoshop. For the most part, it was a very quiet machine. After the power supply was replaced, within minutes of turning the iMac on, I could hear the fans spinning faster and faster, stabilizing at around 4400 rpm and did not stop spinning until I put the iMac to sleep or turned it off, regardless of CPU usage or software being used.
I checked the discussions at this forum (over 500 posts, no real answer) and did every "voodoo trick" suggested: I reset the SMU dozens of time, cleaned the inside of the iMac and around the fan area, did apple hardware test (everything was fine), monitored temperature and activity with XRG (average CPU at 160F, hard drive at 113F), cleaned out caches, tested for corrupt preferences, re-installed the original OS 10.4 (which only made the fans louder), upgraded it back to OS 10.4.9. I also removed the additional 1 GB memory, thinking it might be a bad piece. It didn't help.
Finally, I requested fan replacement from Apple and got them. I installed them last Sunday and now the problem is even worse! Within SECONDS of turning it on, the CPU T- Dio soars to around 170F, even while the machine is still stone cold to the touch. The hard drive temperature now averages at 117F, CPU fan is never below 4000 rpm (4400 rpm 98% of the time), even at 5-8% CPU usage.
The fans themselves are much quieter because they're brand new. But you can still hear the hums and whirs and it drives me nuts. More seriously, my iMac is now narcoleptic. If I use it too long (a few hours on a stretch) it will put itself to sleep, apparently because it thinks it is overheated. And when I use Photoshop or Illustrator, the awake time is even shorter. Depending on the outside temperature, at the most I can only use them for about an hour at a time. Two days ago we had heat wave, and even with the air conditioner running full blast in my study, the iMac kept falling asleep within minutes of using Illustrator.
Right now I am using TextEdit and no other program is running. Uptime is 59 minutes, average CPU 9.6%. CPU T-Dio is at 168.8F, hard drive 117.5F, CPU fan at 4400 rpm. I am out of ideas and before I do something drastic to this machine, if anyone knows what's going on with my iMac (I know every case is different), please help!
iMacG5 ECM 2056 Mac OS X (10.4.9) 20"/2.0GHz Power PC/1.5GB DDR SDRAM/250GB
iMacG5 ECM 2056 Mac OS X (10.4.9) 20"/2.0GHz Power PC/1.5GB DDR SDRAM/250GBI do not have the solution... but the same problem with a nice iMac G5 purchased in July 2005.
My Mac operated very silently untill 6 month ago;problem MAY ( I am not sure) have started when I upgraded to 10.4.10 ; even with few applications and low CPU usage (80% or more inactive), it seems that I have the following regrettable chain of events;
==> the CPU temperature is quite high ( 60°c to 72°c most of the time, ie 140-160 °F)
==> resulting in fan turning at high speed ( 2.000 for CPU and system, 2500 for HD), and changing speed all the time
==> resulting in a noisy computer
I am SURE this was not the case 6 month ago, and I suspect it is linked to my upgrade to 10.4.10.
I did all sorts of reinstall, authorization repair, SMU reset, fan clean-up with no sucess.
iMac G5 (2005) Mac OS X (10.4.10) POwerbook G4 Titanium (2001) -
Hi,
I migrated from OAS 4.0.8.1 to ...2.
When I setup the net80 configuration using Easynet config I get the following error from the testing of the connection:
ORA-12705: Invalid or unknown NLS parameter value specified.
It just worked fine with the earlier version of OAS.
Anyone...pls...Problem solved.
I deleted OAS 4.0.8.2.0 and installed Web-to-go. Then I installed OAS 4.0.8.2.0. -
Please Help! More Capturing Problems.
I'm having some trouble capturing footage from onto Final Cut Express HD.
Whenever I try to capture, the footage plays on my screen for about a second, freezes and I get this error message,
"Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape. Capture has been aborted and you clip has been saved."
I am left with a five second clip from my tape for my trouble. This has only started happening recently, I am using the same setup that I have done before when it was working. I can capture with no issues on imovie.
I have called tech support and they sent me a link that shows how to reinstall final cut and delete all the user preference settings. I have tried different tapes, different sources for saving footage and I still have the exact same problem.
Any more info you need please ask. Please help me, I'm pulling my hair out!
Thanks!Well, I've captured before when the external drives have been connected, but I disconnected them and retried after resetting everything and I still get the same error.
I've also tried resetting the settings on my XHA1 and deleting all the preferences for final cut express, all the receipts etc. And reinstalling and still I get the same error.
I am shooting in HDV and have tried capturing with both 'HD down-conv' on and off, comp out is 1080i/576i (as it's always been). Set my FCE setting correctly? I've been through preferences and system settings, apart from selecting easy setup>DV-NTSC Firewire Basic and making sure there is space on capture scratch, anything else I need to look out for? -
But wait, there's more... more wifi problems = glad to have my nexus 7
i work in a wifi zone. who doesn't. i used to use my ipad 2 (64gig wifi+3g iOS 6.0.1) all the time here to get things from dropbox or take notes with evernote, or to surf answers to questions posed in meetings. wonderful tool. then i updated the OS to 6...
and now i can't use it for more than a couple of minutes before wifi quits working.
i get the same spining wheel of death in the settings>wifi that others have complained about.
i've started carrying my nexus 7 around with the ipad and without failing even a single time the nexus has never had an issue connecting while the ipad sits and spins its wheel of death.
and all this can be had for $1,000 with tax. yea.
at home my wifi connectivity is much better with the ipad, but still it's worse than it was before the 'update'. further, if the nexus can connect i expect the 4 times more expensive, from the great minds at apple, ipad to be able to connect also.
guess i was wrong.
i don't get angry when computers can't do complex things that are relatively new, but wifi isn't new, and i get immensly hacked off when a company breaks a basic functionality of a devise and offers nary a word on a fix.
face it folks. this is just another IT gadget made by just another computer company.iOS 6.1 was just released today. Maybe there's a wifi fix.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Every so often and quite randomly, a song on my iPod will be at a lower volume than it should be. I'll be listening to an album ripped from a single source, and one of the songs will be quieter than the rest of the album. What's even more f u c ked up is that I'll be listening to the same album on iTunes and won't have that problem. Keep in mind that with iTunes I don't have the Sound Check option on, and I don't have any sort of manual volume adjustment turned on, either. In other words, this is just another case of my iPod just randomly f u c king up on my for no apparent reason.
I have also tried deleting the songs from my iPod and re-loading them, but that hasn't worked.take a look at this link
http://docs.info.apple.com/article.html?artnum=61655
according to this link, sound check calculates the volume from the info stored on the song file. part of the miscalculations that the ipod is doing has to do with the info embedded to the audio file and this info was made at the time the audio file was encoded. -
IDCS5 Win:More PanellTreeView problems...
Hello Fellow Coders:
The PanelTreeView widget is probably one of the most complex widgets in the SDK. It has a lot of opportunities to trip up the unwary programmer.
For example, I have a plugin that uses several simple PanelTreeViews (PTV) as listboxes. When the dialog is created the PTV uses the HierarchyAdapater to create the node list. If the data changes during the life of the plugin, it is my responsibility to change the node list; the hierarchy adapter is not called. However, if I dismiss the plugin, delete the data, and then call the plugin back, the PTV is not recreated; the HierarchyAdapter is not recalled to rebuild the node list. The PTV uses the node list from the last instance of the plugin being called.
This is of course, a problem. It means that either I am going to have to empty the PTV before leaving the plugin, or I am going to have to include code to empty and then recreate the node list if the plugin is recalled.
Is there a more elegant solution?
R,
JohnDirk:
I apologize for not being clearer on what my troubles are. I have no problem initializing the PanelTreeView the first time through. What happens is that if I call up the dialog, then dismiss the dialog, then leave the plugin then come back into the plugin and recall the dialog, the data from the previous run still populates the listbox, despite the fact that the data has changed. I even call ChangeRoot() but it does little. Putting a breakpoint in the HierarchyAdapter confirms that the list is not refreshed through it.
I finally wrote code that simply deletes all records in the list box, adds the new records and then calls ChangeRoot(). That seems to work. If there is no other more elegant way, then so be it.
Thanks nevertheless for your input. Take care.
John -
I was doing fine getting email on my powerbook and my iphone. Then I got a interesting problem. I deleted old emails, and surprise. I have a message I can't get too, and when I check mail, i get a "you'v got mail buzz" but i can't read the one message I missed.
Anyone have this, how do I get out of this loop?
I have gotten new messages, but I get a
Load More Messages, 2 received but one unread.
how can I reset my mail account on my iphone and get back to normal?
ThanksNo, that seems to be a bug. Happens on some of my accounts from time to time. Seems to happen on POP accounts moreso than IMAP accounts.
-
Ok, so im having the same problem as everyone else.
As soon as i connect my (20gb B&W) to my PC (winxp) windows immediately freezes.
So i spend all day trying to remedy this problem and halfway thru i realise i cannot even play the music on my ipod anymore when its not connected to my pc.
I follow these instructions:
1. Quit iTunes and disconnect the iPod.
2. If you have the iPodService running -- Right click task bar, select "Task Manager", click on Processes tab. If you find "iPodService.exe" in the list, select it and stop it.
3. Register Atl.dll manually. In Windows, click Start, and then click Run.
The Run dialog box appears. In the Open box, type "regsvr32 atl.dll". Hit return. Do you get a message? What does the message say?
4. Then in Windows, click Start and then click Run. Type in "cmd", hit return. In the dialog that comes up, at the prompt type in "C:\Program Files\iPod\bin\iPodService.exe /service"
5. Run iTunes and connect the iPod back up to it.
That fixed my windows connectivity problem, i was able to open up itunes and even put more music onto my ipod.
after i added more music, i was modifying some playlists and it froze up again, so i disconnect the ipod from my PC and try to see if any music will play. it doesnt.
I try out a diff pair of headpones without any luck, and then the ipod itself freezes.
is anyone else having any problems listening to music after the update?!
this is a huge problem, and i cant believe apple let this update go out like this...Yup, dump Internet Explorer and forget it, except for those occasional situations where sites won't work with other browsers ( like BT's bill payment site !! ) Firefox is brilliant.
-
ADF Apps, CPU high utilization on OAS, how to find the cause of problem ?
Hi all,
We are running ADFBC application on OAS 10.1.3.3 on RH Linux ES 4. The database is Oracle 10g on RH Linux also.
Memory is 16 GB. 1 JVM.
Most of time I see (with linux "top" command) that CPU utilization on OAS is 99.9 %
And at the peak load (150 -200 users) user gets very slow that we have to restart the OC4J to the it normal again.
here is the setting in opmn.xml :
<data id="java-bin" value="/opt/oracle/OraHome_oc4j/jdk64/jdk1.5.0_17/bin/java"/>
<data id="java-options" value="-server -XX:CompileCommand=exclude,oracle/sql/NUMBER,toBytes
-ms3072M -mx3072M -XX:+AggressiveHeap -XX:MaxPermSize=1024M -XX:AppendRatio=3 -Djava.security.policy=$ORACLE_HOME/j2ee/ittas/config/java2.policy
-Djava.awt.headless=true -Dhttp.webdir.enable=false"/>
Heap Usage on EM, is between 2250 MB - 2850 MB.
How do I know what is the cause of that problem ? How can AD4J help to find the source of the problem ?
Thank you very much,
xtantoxtanto,
Hi again...
Just a quick thought (I know it doesn't answer your question directly, but...) have you tried multiple JVM's? It's really quite easy to set up in OAS, and may possibly help you out. How many CPU's on the box?
We have an app (it gets such high concurrent usage during one period of the year), and we're running it on 3 JVM's on a single Linux box with either 2 or 4 (cannot recall) CPU's
John -
So yeah, I have managed to download KDE, and now I'm having trouble starting it...
I feel dumb, forgive me for posting this much on the forums this evening.
I see in the KDE wiki page that there are 2 ways to start KDE. So I first try KDM. When I did pacman -S kdebase-workspace it seems like it had already been installed. I guess when I downloaded KDE? Then I see on this wiki page that an "example configuration for KDM" can be found at /usr/share/config/kdm/kdmrc. So I try to vim that, and it's empty, oh joy. I then try to ls /usr/share/config/kdm and I see there's a README file. Oh wait, that's blank too -_- Whatever, so then I try to enter this command as instructed:
kdesu kcmshell4 kdm
And the output is this:
Fontconfig error: "/etc/fonts/conf.d/20-unhint-small-dejavu-sans-mono.conf", line 1: no element found
[insert about 5 more lines of "fontconfig errors" for different fonts here, all saying "line 1: no element found]
kdesu: cannot connect to X server
So at this point I throw my hands in the air and give up on "KDM" and decide to try method #2, "xinitrc." I copy xinitrc to ~ and comment out "exec startkde" as instructed. I then type xinit in the command line, and the output shows a bunch of initializing built in stuff, and then it says
[dix] Could not init font path element /usr/share/fonts/TTF/, removing from list!
/home/ben/.xinitrc: line 15: /usr/bin/startkde: Success
xinit: connection to X server lost
waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.
So then I try startx. Same thing minus the bit about font path element.
What should I try... ?ewaller wrote:Does X work on your machine? Has it worked in the past, or is this a brand new installation? Could you post your /var/log/Xorg.0.log ??
Erm... startx does not work if that's what you mean. I'm pretty sure that was the command that worked yesterday, before I started all of this KDE stuff. It was just a very crude looking "GUI" if you can even call it that, with three windows that I had to type exit in to get back to the command line. Yesterday was also when I installed this onto the flash drive, so it's a pretty new installation...
Here is the log:
[ 1738.271]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 1738.277] X Protocol Version 11, Revision 0
[ 1738.277] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 1738.278] Current Operating System: Linux archbox 3.9.9-1-ARCH #1 SMP PREEMPT Wed Jul 3 22:45:16 CEST 2013 x86_64
[ 1738.278] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=cdf79b9a-bd86-4d96-bd57-648a68263a8b ro quiet
[ 1738.280] Build Date: 01 July 2013 10:48:42AM
[ 1738.280]
[ 1738.281] Current version of pixman: 0.30.0
[ 1738.282] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 1738.282] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1738.286] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 5 20:27:44 2013
[ 1738.286] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1738.287] (==) No Layout section. Using the first Screen section.
[ 1738.287] (==) No screen section available. Using defaults.
[ 1738.287] (**) |-->Screen "Default Screen Section" (0)
[ 1738.287] (**) | |-->Monitor "<default monitor>"
[ 1738.287] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1738.287] (==) Automatically adding devices
[ 1738.287] (==) Automatically enabling devices
[ 1738.287] (==) Automatically adding GPU devices
[ 1738.287] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1738.287] Entry deleted from font path.
[ 1738.287] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1738.287] Entry deleted from font path.
[ 1738.287] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1738.287] Entry deleted from font path.
[ 1738.287] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1738.287] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1738.287] Entry deleted from font path.
[ 1738.287] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1738.287] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 1738.287] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1738.287] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1738.287] (II) Loader magic: 0x7fdc20
[ 1738.287] (II) Module ABI versions:
[ 1738.287] X.Org ANSI C Emulation: 0.4
[ 1738.287] X.Org Video Driver: 14.1
[ 1738.287] X.Org XInput driver : 19.1
[ 1738.287] X.Org Server Extension : 7.0
[ 1738.287] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1738.288] (--) PCI:*(0:0:2:0) 8086:0166:1b0a:20c5 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64
[ 1738.289] Initializing built-in extension Generic Event Extension
[ 1738.289] Initializing built-in extension SHAPE
[ 1738.290] Initializing built-in extension MIT-SHM
[ 1738.291] Initializing built-in extension XInputExtension
[ 1738.292] Initializing built-in extension XTEST
[ 1738.292] Initializing built-in extension BIG-REQUESTS
[ 1738.293] Initializing built-in extension SYNC
[ 1738.294] Initializing built-in extension XKEYBOARD
[ 1738.294] Initializing built-in extension XC-MISC
[ 1738.295] Initializing built-in extension SECURITY
[ 1738.296] Initializing built-in extension XINERAMA
[ 1738.296] Initializing built-in extension XFIXES
[ 1738.297] Initializing built-in extension RENDER
[ 1738.298] Initializing built-in extension RANDR
[ 1738.298] Initializing built-in extension COMPOSITE
[ 1738.299] Initializing built-in extension DAMAGE
[ 1738.300] Initializing built-in extension MIT-SCREEN-SAVER
[ 1738.300] Initializing built-in extension DOUBLE-BUFFER
[ 1738.301] Initializing built-in extension RECORD
[ 1738.301] Initializing built-in extension DPMS
[ 1738.302] Initializing built-in extension X-Resource
[ 1738.303] Initializing built-in extension XVideo
[ 1738.303] Initializing built-in extension XVideo-MotionCompensation
[ 1738.304] Initializing built-in extension XFree86-VidModeExtension
[ 1738.304] Initializing built-in extension XFree86-DGA
[ 1738.305] Initializing built-in extension XFree86-DRI
[ 1738.305] Initializing built-in extension DRI2
[ 1738.305] (II) LoadModule: "glx"
[ 1738.305] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1738.305] (II) Module glx: vendor="X.Org Foundation"
[ 1738.305] compiled for 1.14.2, module version = 1.0.0
[ 1738.305] ABI class: X.Org Server Extension, version 7.0
[ 1738.305] (==) AIGLX enabled
[ 1738.306] Loading extension GLX
[ 1738.306] (==) Matched intel as autoconfigured driver 0
[ 1738.306] (==) Matched intel as autoconfigured driver 1
[ 1738.306] (==) Matched vesa as autoconfigured driver 2
[ 1738.306] (==) Matched modesetting as autoconfigured driver 3
[ 1738.306] (==) Matched fbdev as autoconfigured driver 4
[ 1738.306] (==) Assigned the driver to the xf86ConfigLayout
[ 1738.306] (II) LoadModule: "intel"
[ 1738.306] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1738.306] (II) Module intel: vendor="X.Org Foundation"
[ 1738.306] compiled for 1.14.2, module version = 2.21.11
[ 1738.306] Module class: X.Org Video Driver
[ 1738.306] ABI class: X.Org Video Driver, version 14.1
[ 1738.306] (II) LoadModule: "vesa"
[ 1738.306] (WW) Warning, couldn't open module vesa
[ 1738.306] (II) UnloadModule: "vesa"
[ 1738.306] (II) Unloading vesa
[ 1738.306] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 1738.306] (II) LoadModule: "modesetting"
[ 1738.307] (WW) Warning, couldn't open module modesetting
[ 1738.307] (II) UnloadModule: "modesetting"
[ 1738.307] (II) Unloading modesetting
[ 1738.307] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 1738.307] (II) LoadModule: "fbdev"
[ 1738.307] (WW) Warning, couldn't open module fbdev
[ 1738.307] (II) UnloadModule: "fbdev"
[ 1738.307] (II) Unloading fbdev
[ 1738.307] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 1738.307] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
Ivybridge Server (GT2), HD Graphics, HD Graphics 4600,
Haswell Desktop (GT3), HD Graphics, HD Graphics 4600,
Haswell Mobile (GT3), HD Graphics, HD Graphics P4600/P4700,
Haswell Server (GT3), Haswell (GT1), Haswell (GT2), Haswell (GT3),
HD Graphics, Haswell (GT2), Haswell (GT3), Haswell SDV Desktop (GT1),
Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT3),
Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
Haswell SDV Mobile (GT3), Haswell SDV Server (GT1),
Haswell SDV Server (GT2), Haswell SDV Server (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell SDV (GT1), Haswell SDV (GT2), Haswell SDV (GT3),
Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4400,
HD Graphics 5000, Haswell ULT Server (GT1), Haswell ULT Server (GT2),
Iris(TM) Graphics 5100, Haswell ULT (GT1), Haswell ULT (GT2),
Iris(TM) Graphics 5100, HD Graphics, HD Graphics 4200,
Iris(TM) Graphics 5100, Haswell CRW Desktop (GT1), HD Graphics 4600,
Iris(TM) Pro Graphics 5200, Haswell CRW Mobile (GT1),
HD Graphics 4600, Iris(TM) Pro Graphics 5200,
Haswell CRW Server (GT1), Haswell CRW Server (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, Haswell CRW (GT1), Haswell CRW (GT2),
Iris(TM) Pro Graphics 5200, ValleyView PO board
[ 1738.307] (++) using VT number 1
[ 1738.307] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1738.307] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1738.307] (==) intel(0): RGB weight 888
[ 1738.307] (==) intel(0): Default visual is TrueColor
[ 1738.308] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 1738.308] (**) intel(0): Relaxed fencing enabled
[ 1738.308] (**) intel(0): Wait on SwapBuffers? enabled
[ 1738.308] (**) intel(0): Triple buffering? enabled
[ 1738.308] (**) intel(0): Framebuffer tiled
[ 1738.308] (**) intel(0): Pixmaps tiled
[ 1738.308] (**) intel(0): 3D buffers tiled
[ 1738.308] (**) intel(0): SwapBuffers wait enabled
[ 1738.308] (==) intel(0): video overlay key set to 0x101fe
[ 1738.308] (II) intel(0): Output LVDS1 has no monitor section
[ 1738.308] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 1738.333] (II) intel(0): Output VGA1 has no monitor section
[ 1738.333] (II) intel(0): Output HDMI1 has no monitor section
[ 1738.333] (II) intel(0): Output DP1 has no monitor section
[ 1738.333] (II) intel(0): EDID for output LVDS1
[ 1738.333] (II) intel(0): Manufacturer: IVO Model: 579 Serial#: 1
[ 1738.333] (II) intel(0): Year: 2009 Week: 49
[ 1738.333] (II) intel(0): EDID Version: 1.3
[ 1738.333] (II) intel(0): Digital Display Input
[ 1738.333] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 1738.333] (II) intel(0): Gamma: 2.20
[ 1738.333] (II) intel(0): No DPMS capabilities specified
[ 1738.333] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1738.333] (II) intel(0): First detailed timing is preferred mode
[ 1738.333] (II) intel(0): redX: 0.587 redY: 0.349 greenX: 0.337 greenY: 0.564
[ 1738.333] (II) intel(0): blueX: 0.152 blueY: 0.109 whiteX: 0.312 whiteY: 0.328
[ 1738.333] (II) intel(0): Manufacturer's mask: 0
[ 1738.333] (II) intel(0): Supported detailed timing:
[ 1738.333] (II) intel(0): clock: 74.9 MHz Image Size: 309 x 174 mm
[ 1738.333] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1548 h_border: 0
[ 1738.333] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 783 v_blanking: 806 v_border: 0
[ 1738.333] (II) intel(0): Unknown vendor-specific block 0
[ 1738.333] (II) intel(0): InfoVision
[ 1738.333] (II) intel(0): M140NWR1 R0
[ 1738.333] (II) intel(0): EDID (in hex):
[ 1738.333] (II) intel(0): 00ffffffffffff0026cf790501000000
[ 1738.333] (II) intel(0): 31130103801f11780a56009659569027
[ 1738.333] (II) intel(0): 1c505400000001010101010101010101
[ 1738.333] (II) intel(0): 0101010101013e1d56b6500026303020
[ 1738.333] (II) intel(0): 3c0035ae1000001900000f0000000000
[ 1738.333] (II) intel(0): 00000000000000000001000000fe0049
[ 1738.333] (II) intel(0): 6e666f566973696f6e0a2020000000fe
[ 1738.333] (II) intel(0): 004d3134304e5752312052300a200021
[ 1738.333] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 1738.333] (II) intel(0): Printing probed modes for output LVDS1
[ 1738.333] (II) intel(0): Modeline "1366x768"x60.0 74.86 1366 1414 1446 1548 768 771 783 806 -hsync -vsync (48.4 kHz eP)
[ 1738.334] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 1738.334] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 1738.334] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 1738.334] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 1738.359] (II) intel(0): EDID for output VGA1
[ 1738.360] (II) intel(0): EDID for output HDMI1
[ 1738.360] (II) intel(0): EDID for output DP1
[ 1738.360] (II) intel(0): Output LVDS1 connected
[ 1738.360] (II) intel(0): Output VGA1 disconnected
[ 1738.360] (II) intel(0): Output HDMI1 disconnected
[ 1738.360] (II) intel(0): Output DP1 disconnected
[ 1738.360] (II) intel(0): Using exact sizes for initial modes
[ 1738.360] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 1738.360] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1738.360] (II) intel(0): Kernel page flipping support detected, enabling
[ 1738.360] (==) intel(0): DPI set to (96, 96)
[ 1738.360] (II) Loading sub module "fb"
[ 1738.360] (II) LoadModule: "fb"
[ 1738.360] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1738.360] (II) Module fb: vendor="X.Org Foundation"
[ 1738.360] compiled for 1.14.2, module version = 1.0.0
[ 1738.360] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1738.360] (II) Loading sub module "dri2"
[ 1738.360] (II) LoadModule: "dri2"
[ 1738.360] (II) Module "dri2" already built-in
[ 1738.360] (==) Depth 24 pixmap format is 32 bpp
[ 1738.360] (II) intel(0): [DRI2] Setup complete
[ 1738.360] (II) intel(0): [DRI2] DRI driver: i965
[ 1738.360] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 1738.361] (II) UXA(0): Driver registered support for the following operations:
[ 1738.361] (II) solid
[ 1738.361] (II) copy
[ 1738.361] (II) composite (RENDER acceleration)
[ 1738.361] (II) put_image
[ 1738.361] (II) get_image
[ 1738.361] (==) intel(0): Backing store disabled
[ 1738.361] (==) intel(0): Silken mouse enabled
[ 1738.361] (II) intel(0): Initializing HW Cursor
[ 1738.361] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1738.362] (==) intel(0): DPMS enabled
[ 1738.362] (==) intel(0): Intel XvMC decoder enabled
[ 1738.362] (II) intel(0): Set up textured video
[ 1738.362] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 1738.362] (II) intel(0): direct rendering: DRI2 Enabled
[ 1738.362] (==) intel(0): hotplug detection: "enabled"
[ 1738.376] (--) RandR disabled
[ 1738.390] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1738.390] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1738.390] (II) AIGLX: enabled GLX_ARB_create_context
[ 1738.390] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1738.390] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1738.390] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1738.390] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1738.390] (II) AIGLX: Loaded and initialized i965
[ 1738.390] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1738.390] (II) intel(0): Setting screen physical size to 361 x 203
[ 1738.393] [dix] Could not init font path element /usr/share/fonts/TTF/, removing from list!
[ 1738.429] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 1738.429] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1738.429] (II) LoadModule: "evdev"
[ 1738.430] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1738.430] (II) Module evdev: vendor="X.Org Foundation"
[ 1738.430] compiled for 1.14.0, module version = 2.8.0
[ 1738.430] Module class: X.Org XInput Driver
[ 1738.430] ABI class: X.Org XInput driver, version 19.1
[ 1738.430] (II) Using input driver 'evdev' for 'Power Button'
[ 1738.430] (**) Power Button: always reports core events
[ 1738.430] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 1738.430] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1738.430] (--) evdev: Power Button: Found keys
[ 1738.430] (II) evdev: Power Button: Configuring as keyboard
[ 1738.430] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 1738.430] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1738.431] (**) Option "xkb_rules" "evdev"
[ 1738.431] (**) Option "xkb_model" "evdev"
[ 1738.431] (**) Option "xkb_layout" "us"
[ 1738.467] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 1738.467] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1738.467] (II) Using input driver 'evdev' for 'Video Bus'
[ 1738.467] (**) Video Bus: always reports core events
[ 1738.467] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 1738.467] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 1738.467] (--) evdev: Video Bus: Found keys
[ 1738.467] (II) evdev: Video Bus: Configuring as keyboard
[ 1738.467] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10/event10"
[ 1738.467] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 1738.467] (**) Option "xkb_rules" "evdev"
[ 1738.467] (**) Option "xkb_model" "evdev"
[ 1738.467] (**) Option "xkb_layout" "us"
[ 1738.468] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 1738.468] (II) No input driver specified, ignoring this device.
[ 1738.468] (II) This device may have been added with another device file.
[ 1738.469] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 1738.469] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 1738.469] (II) Using input driver 'evdev' for 'Sleep Button'
[ 1738.469] (**) Sleep Button: always reports core events
[ 1738.469] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 1738.469] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 1738.469] (--) evdev: Sleep Button: Found keys
[ 1738.469] (II) evdev: Sleep Button: Configuring as keyboard
[ 1738.469] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[ 1738.469] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 1738.469] (**) Option "xkb_rules" "evdev"
[ 1738.469] (**) Option "xkb_model" "evdev"
[ 1738.469] (**) Option "xkb_layout" "us"
[ 1738.470] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1738.470] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event8)
[ 1738.470] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 1738.470] (II) Using input driver 'evdev' for 'USB 2.0 Camera'
[ 1738.471] (**) USB 2.0 Camera: always reports core events
[ 1738.471] (**) evdev: USB 2.0 Camera: Device: "/dev/input/event8"
[ 1738.471] (--) evdev: USB 2.0 Camera: Vendor 0xc45 Product 0x6457
[ 1738.471] (--) evdev: USB 2.0 Camera: Found keys
[ 1738.471] (II) evdev: USB 2.0 Camera: Configuring as keyboard
[ 1738.471] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input8/event8"
[ 1738.471] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD, id 9)
[ 1738.471] (**) Option "xkb_rules" "evdev"
[ 1738.471] (**) Option "xkb_model" "evdev"
[ 1738.471] (**) Option "xkb_layout" "us"
[ 1738.472] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event5)
[ 1738.472] (II) No input driver specified, ignoring this device.
[ 1738.472] (II) This device may have been added with another device file.
[ 1738.472] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event6)
[ 1738.472] (II) No input driver specified, ignoring this device.
[ 1738.472] (II) This device may have been added with another device file.
[ 1738.473] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event7)
[ 1738.473] (II) No input driver specified, ignoring this device.
[ 1738.473] (II) This device may have been added with another device file.
[ 1738.473] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1738.473] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1738.473] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1738.473] (**) AT Translated Set 2 keyboard: always reports core events
[ 1738.473] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1738.473] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1738.473] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1738.473] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1738.474] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1738.474] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 1738.474] (**) Option "xkb_rules" "evdev"
[ 1738.474] (**) Option "xkb_model" "evdev"
[ 1738.474] (**) Option "xkb_layout" "us"
[ 1738.475] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 1738.475] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 1738.475] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 1738.475] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 1738.475] (II) LoadModule: "synaptics"
[ 1738.475] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 1738.475] (II) Module synaptics: vendor="X.Org Foundation"
[ 1738.475] compiled for 1.14.1, module version = 1.7.1
[ 1738.475] Module class: X.Org XInput Driver
[ 1738.475] ABI class: X.Org XInput driver, version 19.1
[ 1738.475] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 1738.475] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1738.475] (**) Option "Device" "/dev/input/event9"
[ 1738.480] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 1738.480] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5634 (res 51)
[ 1738.480] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4598 (res 76)
[ 1738.480] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 1738.480] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 1738.480] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 1738.480] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 1738.480] (**) Option "TapButton1" "1"
[ 1738.480] (**) Option "TapButton2" "2"
[ 1738.480] (**) Option "TapButton3" "3"
[ 1738.480] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 1738.480] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1738.481] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input9/event9"
[ 1738.481] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[ 1738.481] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 1738.481] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 1738.481] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[ 1738.481] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 1738.482] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 1738.482] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 1738.482] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 1738.482] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 1738.483] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 1738.483] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 1738.483] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 1738.483] (II) No input driver specified, ignoring this device.
[ 1738.483] (II) This device may have been added with another device file.
[ 1738.528] (II) UnloadModule: "synaptics"
[ 1738.528] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1738.528] (II) UnloadModule: "evdev"
[ 1738.528] (II) evdev: USB 2.0 Camera: Close
[ 1738.528] (II) UnloadModule: "evdev"
[ 1738.528] (II) evdev: Sleep Button: Close
[ 1738.528] (II) UnloadModule: "evdev"
[ 1738.528] (II) evdev: Video Bus: Close
[ 1738.528] (II) UnloadModule: "evdev"
[ 1738.528] (II) evdev: Power Button: Close
[ 1738.528] (II) UnloadModule: "evdev"
[ 1739.340] (EE) Server terminated successfully (0). Closing log file.
Moderator Edit: Added code tags[ -- ewaller
Last edited by ewaller (2013-07-06 00:49:24) -
so this is a mac first for me. you can have two windows of the same folder open at the same time? you open the window through the folder icon and it opens up. you open up the alias and it opens up again in the wrong window size and location,
!http://www.allsolutions.net/grafx/doublejulie.jpg!
have folder aliases been obsoleted?
Message was edited by: since1994what a trip!
well i tried what you said, but i could tell the plist didnt get redone. it was still 16 k. (i have a quickeys shortcut to open the preferences folder.) and nothing had changed when i logged back in.
so i tried opening it with bbedit.. there was a LOT of wierd stuff in there. couldnt save a copy to the desk top. i dragged a copy to the desktop and couln't edit that either. couldn't edit a re-named copy of it on the desktop, either. kept getting an error. (MacOS Error code: -4960)
anyway i quit the finder while the finder plist file was open in bbedit. then I COULD save it. then when i fired up the finder again all my icons were waaay large, and moved all around. lol and i could tell my prefs were reset.
i'm only mentioning all this for possible future reference, cuz it doesn't seem to be that easy to get rid of that finder plist any more. i think it saves itself somewhere.
alas, it didnt fix my problem... but i'm a firm believer of flushing things out once in a while anyway... any time i get a new computer or hard drive i start from scratch with a clean install.
i cant remember how i got rid of those alternating colors in list view, though. haha
Maybe you are looking for
-
Infact I now see that calendar entries updated in iOS 6 are all uneditable
Infact I now see that calendar entries updated in iOS 6 are all uneditable
-
I was using my I pad for work and school using keynote and pages I took off for a holiday and now my doc are not available on my pad. How did this happen and how do I fix this?
-
help me how can i get my phone to work in movistar which is my carrier in ecuador gsm . sprint iphones does have sim card slot but i'm not sure if it will work for gsm what do i need to do , how do i unlock it
-
Can Front Row be set to use VLC?
I'd like to be able to play my .avi movies using front row, but it seems to default to using Quick Time, which doesn't play all of my movies. VLC works wonderfully, is there a way to make Front Row use VLC? Any help with this is appreciated, thanks.
-
I have new macbook and I have recently have been having a problem where every so often Ichat will shut down and the infamous Ichat agent has unexpectedly shutdown pops up and it wont let me log back in i tried changing the port to 443 that didnt work