OAS 4.0.8.2.1.a and Iplanet Directory Server
How can I add the schema needed for OAS 4.0.8.2.1a into a Netscape Directory Server so that the OAS can create the objects needed for listener names etc?
^UP^
Similar Messages
-
Solaris 8 and iPlanet Directory Server 5.1: Help
Could anyone help with advice or where to find documentation of how to setup a Solaris 8 client machine to authenticate against iPlanet Directory Server 5.1? The only documentation (eg books, BluePrint articles) I can find cover iPlanet Directory 4.11 or 4.12 and a Solaris 8 client. Even the tools from the BluePrint Tools area at Sun only talk about using iPlanet Directory Server 4.11/12. Quite a lot seems to have change from iDS 4.12 to iDS5.1.
Any help would be greatly appreciated.
Thanks in advance,
StewartHi Steven, I suppose that this question is identical to your other question: " Topic: solaris 8 client setup with solaris 9 ldap".
So the answer will be the same.
You may find what you are looking for in the following technical note: http://knowledgebase.iplanet.com/ikb/kb/articles/7966.html
It is called: "Cookbook for Solaris 8 client with Directory Server 5.1/Solaris 9"
Cheers / Damien. -
Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.
Hi,
You didnt mention which version of IWS. follow these steps.
(1)Goto Web Server Administration Server, select the server you want to manage.
(2)Select Preference >> Perfomance Tuning.
(3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
(4) Apply changes and restart the server.
*Setting the timeout to a lower value, however, may prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before the connection is closed is 432000 bits (2400 multiplied by 180)
Regards
T.Raghulan
[email protected] -
Installation Error with iPlanet Directory Server 5.1 SP1 and Windows 2000
Hello,
I'm having real trouble getting iPlanet Directory Server installed on a Windows 200 Server machine. Every time I install it, no matter what options I choose, I get this series of popup boxes at the end:
- Setup is unable to store configuration data in the LDAP directory
- Unable to create Administration Server configuration
- Could not authenticate ldap connection, "Unknown error"
- Unable to set ACI in Configuration Directory Server
But searching on this forum, I have found a lot of post. I have tested the different solution proposed :
* Add on the host file the short name and the long name of my machine with it's IP adress
* When the installation process crash, uninstall the software, reboot the machine and then restart the installation
With all this solution, the problem is always here.
Could you help me ?
Boris MANCHETTEAre you using Terminal Services. iPlanet DS will not install properly over Terminal Services. You have to install from the direct attached console.
Ted -
Differences between SunONE, iPlanet and Netscape Directory Server
What are the differences between SunONE, iPlanet and Netscape Directory Server?
When I go to docs.sun.com - Products Categories, I saw that they've documentation regarding with SunONE, iPlanet, Netscape Directory Server listed under Directory Server.
I know that they're all different directory server, but is it one newer than other? If I'm not wrong, I assumed that Netscape transformed into iPlanet, and then from iPlanet, it transformed to SunONE. If that is the case, is that mean that all of it's console and how it works should be very similar?
Thanks!That is exactly what I thought.
so when people refer SunONE Directory Server 5.1, then that's mean iPlanet Directory Server 5.1, right?
Because I'm looking at Solaris 9's specification and it mentioned that it bundled with SunONE Directory Server 5.1.
Thanks for answering my question! :) -
JNDI Tutorial Sun and IBM Directory server v5.1
Hi there guys,
I'm new with JNDI and LDAP but I trying to get the tutorial started with the IBM Directory server v5.1 but with no luck. The tutorial mentions something about root naming contexts. As far as I can find in the docs of the IBM directory server there are no root naming contexts. Am I right? Further when I added the several DN's under the suffixes and I try to restart the server, the server won't start anymore. What I did was adding the following lines as suffixes:
o=JNDITutorial
ou=Groups, o=JNDITutorial
cn=Directory Administrators, ou=Groups, o=JNDITutorial
etc..
Is there someone who had the same problems?
Or are there any suggestions for using another (free) LDAP server?
Hope someone can help.in suffixes you can only add 'o's ..not ous, cns etc.
For that run a ldif for that o, as an admin to add a tree.
hope this helps. -
NetGenesis and iPlanet portal server
Hi Group,
Has anyone used NetGenesis (I believe NetAnalysis is the actual name of the
product) to track web traffic data? Have you used it for an iPlanet portal
server web site? Can you track a portal site the same way as you would
track a regular website?
Thanks in advance.
CJI think the servlet container in Portal is meant to be "black boxed" - ie
you shouldn't use it to run anything except Portal.
So stick with your tomcat, and you can integrate it using the normal
Portal APIs and Provider API.
Regards
ws
Will Bohan wrote:
I am fairly new to iPlanet Portal Server 3.0 (have used Tomcat and Resin
before)
I was wondering where should I place a war file with this server to make
it work
(i.e. a war file placed in tomcat_install_dir/webapps will be extracted
and run with tomcat)
Is there a similar location for iPlanet Portal Server 3.0? I have been
reading the documentation
at docs.iplanet for days and cannot find the answer...
Thanks for the assistance
-Will -
iPS Mobility Access Pack is an add-on package to iPS
It provides Calendar, Mail, and Address Book provider channels that easily integrate iMS, iCS, iDS, into Portal.
It helps to have an external LDAP configuration also,
this holds userid/passwords for both iMS and iCS and can be used for Portal to authenticate against. Just
configure via Portal admin a domain, authentication, LDAP.
Messaging needs some parameters configured.
Using configutil, set the following:
local.webmail.sso.enable 1
local.webmail.sso.prefix ssogrp1
local.webmail.sso.id msg50
local.webmail.sso.singlesignoff 1
service.http.ipsecurity no
Restart everything, and as a user, login using LDAP
authentication, then Edit your content enabling
the Mail Provider. With the Mail Provider enabled,
Edit the channel filling in the information based on
your Messenger Express client.
Good luck. -
Doesn't Oracle8iR2 for Linux Enterprise include OEM and Internet Directory Server?
Those two servers are included in Oracle8iR2 for NT and Solaris. But I can't find them in Linux version. Does the Linux version support them?
If a system becomes unresponsive and does not allow you to login anymore then the problem might be due to a serious shortage of CPU, memory or disk resources. For a remote connection it cannot be said for sure because the problem can also be network or routing related. Try to login directly from the system console. If this is no longer possible, then the system "interrupt" or "reset" button is your best friend. When the system restarts, press any key to get into the grub menu and add the word "single" to the kernel parameter line in order to start the system in single user mode. Then analyze what the problem was.
Btw, here is a recent post regarding a script that fires an email when a system is running out CPU and disk space: CPU and File system Altert Perhaps you will find it useful. -
If you are using Exchange 5.5 or later you don't really need a custom connector. Exchange has an export/import command "admin.exe" that can be used to create a csv file of your exchange users (and other info). All you'll need then is the meta UTC (Universal Text Connector).
-
Hi,
It is possible, But it has to be done through codes and iPlanet Web Server has nothing to do with it. But if you want to create the word document by ASP you have to install ASP plugin like ChilliASP (from Chilisoft) with iPlanet Web Server.Merging with database can be done through your code.
To know more abt creating word doc through ASP try this link
http://web.ukonline.co.uk/vance/code/aspworddoc.pdf
Regards,
T.Raghulan. -
How do I implement Directory server 5.1? Install it and then buy licences later?
I am new to Directory Server 5.1 and need to install it as a pre-req to a 3rd party product.
Is the server freeware? If not how much does it cost do I have to buy licences separately once I download the server?I believe, you can download develop and test on iPlanet Directory Server 5.1 for free. When you deploy in commercial production environment, you will need licenses. The licenses are per LDAP entry. So if you use more entries you pay more.
-
Directory Server 5.0 and 5.1 - Triggers
Does the previous versions of Sun Java Directory Server 5.0 and 5.1 support LDAP Triggers.
I need to be clarified soon.Hi,
You can set this in "iPlanet Diretory Server", to force the user to log off after particular time. For more info. check iPlanet Directory server guide.
Regards,
Dakshin. -
Netscape SDK and Active Directory
I am trying to connect to AD over port 636 with SSL enabled. I am using a program that uses the Netscape 5.08 SDK. I am able to connect via 389 without SSL and I can connect to IPlanet Directory Server for both ssl and non ssl ports. Is there a limitation in the Netscape SDK for SSL connection to Active Directory?
It should be possible ...
Any error messages to share?
Have you tried connecting through other means to port 636 on the domain controller - like ldapsearch or even from the address book if you also run Outlook? Failure to connect in these instances will provide you some errors that can help in troubleshooting ... -
Iplanet Console and Iplanet Servers
I installed iplanet directory server , web server and Iplanet Application Server ihave installed Iplanet admin server and console also . When i am opening Servers through iplanet console from actual server where they are installed they are opening very fine . But when i am trying to open servers From my Windows machine through same version of iplanet console .It is opening Directory server only, for Application server and Web Server it is not opening and not giving any error even . But could be reason for this , Am i doing some wrong configuration .
Please help me regrading this .By looking at the date of this posting, I hope you have had resolution on this issue already. By now, I'm sure it is obvious that this question is just posted to the wrong category and should be posted to
Application Server:
http://softwareforum.sun.com/NASApp/jive/index.jsp?cat=10
or Web Server:
http://softwareforum.sun.com/NASApp/jive/forum.jsp?forum=16
Sorry for the poor response time, and again, I hope you have been given some resolution to your issues.
appologies,
craig
Maybe you are looking for
-
Convert date and time in decimal characters
Hi, I need to convert the date ad the time in decimal characters. Any idea to do this ? TNX in advance for your help Alex
-
Previously running CS4 won't open, even after script clean and reinstall
I can't get in!.... Seems like a license issue. After trying all (7) of the fixes in kb405970 recommended by Adobe tech support, I was unable to get access to my previously working CS4 Production Suite products. I removed the entire program and ran C
-
Asset Intelligence Third Party Import File with multiple PO# for Same Software Title.
A customer of mine ask me if there is a way to import third-party license information to SCCM 2012 Asset Intelligence that contain multiple POs either from same or different vendors using one line per PO. I try using the following test input file bu
-
NI Motion assistant Version 2.6 Labview full development system 2012 I need to read a CAD file and export the XYZ coordinates. Problem : It's possible with Motion assistant to enter a dxf file and to export XML file. After this I can to work with th
-
ERROR disp+work.exe WSAECONNRESET: Connection reset by peer
Hi, I've a Netweaver 2004s installed on Windows 2003 Server and SQL Server. The name of the amchine is solution and the domain where it's on is grupotec.local, so when I start it from SAP MMC, the dispatcher appears with yellow colour. When I read th