OAS listener

I have OAS 4.0.6 on NT.
Does anyone know what type of entry I need to make in
TNSNAMES.ORA to allow the reports server to start ?
I am getting the "expected" error REP-0186, but am not sure
exactly what it means. Port Number maybe ? Isn't that meant to
refer to the listener on the server ?
Any help gratefully received
null

If your listener is listening on port 80
you do not need to include :80 on your url.
To find your index.html by default specify
it as your initial file for the listener
under the listener server section
HTTP Listeners
<listener name>
Server => Initial File index.html
I assume you are using OAS 4.0
Regards Zed
null

Similar Messages

Oas listener's configuration cannot be invoked

after installation of OAS,listener creation is successful.but listeners configuration pages does not open .So no configuration for any listener can be done.message displayed is URL not found though the files are availablein C:\orant\4.0\admin\cgi
null

i have the same problem and i hope that if you manage it, you will send me a mail...
everything in installation went right and i don4t know what do do :o(((

DEVELOPMENT TEAM: OAS App-cartdrige doesn't start!!

Please Developement Team..
in my configuration(NT SP4,DEV 6 prod.+ Jinitiator 11711,OAS
4.7.00+ 4.0.7.1.0 patch,Oracle 8.1.5) the static_jinit html work
fine troght OAS listener.
But trought html cartridge it doesn't run..
the message is "Can not service this request, please try again
later.."
inside wrb.log i see:
sagittarius `Broker` 550 1 0x10fff
`OWS-04759: No host is available to create Cartridge
test/web_cart. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04517: Error indicated by broker in getting
cartridges of type test/web_cart. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04511: Error in grabbing cartridge type
test/web_cart from the subsystem. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04512: Request
7CEDE6D1D702-C13F-E000-26122BC101BD has internal error due to
Error 4511. `
sagittarius `Broker` 550 1 0x10fff
`OWS-04759: No host is available to create Cartridge
test/web_cart. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04517: Error indicated by broker in getting
cartridges of type test/web_cart. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04511: Error in grabbing cartridge type
test/web_cart from the subsystem. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04512: Request
7DEDE6D1D702-C13F-E000-26122BC101BD has internal error due to
Error 4511. `
... it seems the catridge doesn't up..WHY??
On my OAS tree applet ALL application server and http listener
are green flags, only application tree are all red flags.
I don't know what to do..
thanks
null

Hi,
Refer the thread started by you at http://forum.java.sun.com/thread.jsp?forum=17&thread=501024&start=0&range=15#2375485
There are no duke dollars assigned to your post there ,hence once again a reply to your post.
-Amol

OAS HTTPS - error?

I set up SSL authentication on one OAS listener, then I build and install OAS sample servlets ( ListSamples, SnoopServlet & etc.).
When I fire SnoopServlet, it write:
Server port 443
Remote user null
URL scheme https
Authorization scheme null
I think, "Authorization scheme" must be "SSL". I'm not right?

Authorization scheme will appears if:
- you are using an DAD without user/pass
- you are protected a virtual directory with the scheme Basic_Oracle
- you are using owa_sec.global plsql cartridge security scheme.
Resuming it, if the browser doesn't ask the user/password with a pop screen this values are not setted by the CGI enviroment.
In this case it will show
Auth type: basic
User: the user entered in the pop screen.
Best regards, Marcelo.

JSP in OAS

Hola pobres tontos!
Quickly, should I simply forget about OAS and go to 9iAS? Is OAS essentially vaporware?
I have an 8.1.6 database with JServer installed. But the OAS listener does not interpret JSP pages. For example, I can place the hello.jsp file on a virtual directory, but the OAS will not interpret it as a JSP page. Any pointers, links, how-tos, or tutorials I can look at?
Gracias!

I am looking for the same answer. If you find it, please send it to me at [email protected]
Thanx
--Michael

OAS 4.08 , PL/SQL Cartridge , SSL3.0

Hi ALL,
Could someone give me any pointers in programming in the PL/SQL
Cartridge(OAS 4.08) with SSL 3.0?
Does implementing SSL 3.0 in the PL/SQL cartridge have to do
with programming or are there some settings which i have to make
on the OAS?
(We will be configuring the Netscape Enterprise server as the
OAS listener)
gurus...help!!!!
Thanx in advance
Radhika
null

I'm also interested in knowing how to access session variables in PL/SQL? I have only found descriptions of what session management is. I can't seem to find any sample code or documentation on the How Tos.
Thanks,
Paul
<BLOCKQUOTE>quote:<HR>Originally posted by sachin:
Hi Folks,
I am developing an application using OAS 4.0.8.1, I would like to know, is it advised to use the PL/SQL cartridge in session enabled mode? Ours is a online transaction system type of applicatin.
What are the advantages and disadvantages of enabling the client sessions.
Regards,
Sachin Chhajed.<HR></BLOCKQUOTE>
null

Generic Apache calling OAS for pl/sql pages

I have a generic apache 2.2 set up using SSL and everything works fine. We are calling OAS v10.1.2 for pl/sql pages. This works fine. Now we want to use SSL certificates. The certificates are correct for the generic apache, but when I call the pl/sql it doesn't work.
1. If we have SSLVerifyclient OPTIONAL on the apache 2.2 the call to pl/sql is correct and the certificate is generated, but not for the pages on the apache 2.2. server.
2. If we remove SSLVerifyclient OPTIONAL on the apache 2.2 the ssl certificate is correct for the pages on the apache 2.2 but not for the pl/sql pages form the OAS.
Where should the ssl certificate come from for the OAS pl/sql? The OAS server or the generic apache server?

You should post your question on the OTN (Oracle Technology Network) discussion forum.: www.technet.oracle.com. There is an iAS section where you can post questions on oas.
<BLOCKQUOTE>quote:<HR>Originally posted by Tomh:
Hi all,
I am working on a e-commece portal site.
Can anyone share experiences on the best configurations for running PL/SQL web applications. I'm about to deploy a production Web OLTP application developed completely with PL/SQL (8.1.5), and would like to know which of the following would be the most reliable and best performance option:
o WebDB listener + Oracle 815
Can WebDB give us high performance?
o OAS listener 4.0.8.1 + OAS 4.0.8.1 + Oracle 815
Is this the best choice?
o Apache listener + OAS 4.0.8.1 + Oracle 815
Any input appreciated. I think it would be useful for all people reading this list to hear some feedback...
Thanks!
Tomh.
<HR></BLOCKQUOTE>
null

Invoking bpel processes

Hi,
Could someone please help us with this scenario.
Currently from Oracle Applications R12 we are invoking the BPEL process by passing the SOAP envelope over HTTP Post request.
Now is there any way we could use the concept of Queues wherein we extract the data from Oracle system and then put it in the database queue and then have a BPEL process deployed on the OAS listen to this queue and take the data and process further...
I am not very conversant with this concept as to what all needs to be configured regards
--setting up and defining the queue on the Oracle DB side ..how to define the queue and other steps involved
--starting of the queue.
--also what method should be used to put the data/details in the queue.
--could an entire xml from the Oracle source system be inserted into this database queue.
-- How would the bpel process listen to this queue/poll the queue and take this data and process further.
In case if someone has an example and steps for the above mentioned points..that would be really very helpful of you.
Regards

Hi
This is possible and very common use-case in BPEL world.
If you check BPEL cook book, you can find help on these topics.
You can also search in BPEL developer guide.
Thanks,
Praveen

Forms-cartridge doesn't start!!...

this is my problem...
in my configuration(NT SP4,DEV 6 prod.+ Jinitiator 11711,OAS
4.7.00+ 4.0.7.1.0 patch,Oracle 8.1.5) the static_jinit html work
fine troght OAS listener.
But trought html cartridge it doesn't run..
the message is "Can not service this request, please try again
later.."
inside wrb.log i see:
sagittarius `Broker` 550 1 0x10fff
`OWS-04759: No host is available to create Cartridge
test/web_cart. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04517: Error indicated by broker in getting
cartridges of type test/web_cart. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04511: Error in grabbing cartridge type
test/web_cart from the subsystem. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04512: Request
7CEDE6D1D702-C13F-E000-26122BC101BD has internal error due to
Error 4511. `
sagittarius `Broker` 550 1 0x10fff
`OWS-04759: No host is available to create Cartridge
test/web_cart. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04517: Error indicated by broker in getting
cartridges of type test/web_cart. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04511: Error in grabbing cartridge type
test/web_cart from the subsystem. `
sagittarius `Dispatcher` 445 1
0x2fff `OWS-04512: Request
7DEDE6D1D702-C13F-E000-26122BC101BD has internal error due to
Error 4511. `
... it seems the catridge doesn't up..WHY??
On my OAS tree applet ALL application server and http listener
are green flags, only application tree are all red flags.
I don't know what to do..CAN anyone help me??
thanks
null

In our case, we had to install OAS 4.0.7.x and developer server 6.0 in the SAME oracle home.
With D2K server 2.1, you had to install in SEPARATE oracle home (even tough the manual did not say so) in order to be able to relink the executables. In 6.0, we said to ourselves (even tough the manual said to install in same OH) that we better not follow the manual and do like 2.1: WRONG
In 6.0 you NEED to install in same OH
null

JWeb application on OAS4.0.7.1

Hi,
I know how to dploy simple applets on the OAS and run the same from the Browser.
I would like to now the STEP-BY-STEP method for deploying the JWeb applicatations on OAS.
The documents are not clear.
Thanks in advance.
Thiru

First of all create the HTML page, ensure that your .fmx exists in the same directory.
Set the paths in the OAS listener directory settings and in the Registry if you're running WinNT.
Make sure the Forms Server Listener is running.
Type the URL and you're on the go.

Designer Web Assistant with iAS

Hi,
Anyone using ODWA with the new iAS (not OAS) listener? I've got it working except for the virtual directory mapping for the gifs.
The install instructions are excellent, but not for this version of iAS. I've tried different combinations for the Path Aliasing, but this seems to be more for DB stored logic than physical directories.
TIA,
Gary Wong

Hi,
Found the answer and wanted to share it...
Edit jserv.conf, and put:
Alias /odwa_images/ "E:\OraNT\odwa\gif/"
Where E:\OraNT is your <OracleHome>. I remembered that the listener is now just
straight Apache.
Cheers,
Gary
null

OAS 4.0.8.1 + Apache web listener

Help!
I'm not having all the problems running OAS 4.0.8.1 on Redhat 6.1 that everyone else is (my processes stay up and it's significantly faster than 4.0.7.1 on RH 5.2). But what I'd really like to do is dump Oracle's Spyglass web listeners and run Apache instead. This includes all cartridges and such as well as standard HTML. I'm mostly interested in the PL/SQL cartridge, but all working would be nice.
This can be done by compiling Apache specially with MOD_SO support and registering Apache as a listener. The very sketchy directions are in the docs under the Administration section. The directions are very poor (thank you again Oracle, we wouldn't want you to actually write good docs, it would spoil us for the years of terrible documentation) and I can't quite get it to work. I get Apache compiled and the shared objects libraries load, I think.
When I start Apache, it says it starts but it really doesn't. Dies immediately and doesn't show up on the process list. The error logs shows the following message:
(111)Connection refused: OAS Adapter: Error connecting to dispatcher
This is a major issue for me and any help would be appreciated. Anyone had any luck getting this to work?
Thanks!

Dear jgerry,
Congrats on getting Apache compiled. I am new to all of this, and the documentation is poor. The way I understand the documentation on www.olab.com, libapadp.so must be linked into Apache. Is this true? If so, I would love to know how to recompile it. I have downloaded and unzipped/untared 1.3.12, but I can't find out how to just link in a .so file. The only references I see are how to start out with a .c file. I have fould libapadp.so and ndwfapd.so in the Oracle install. I thought that just doing "LoadModule ows_module ndwfapd.so" would do the trick if I put ndwfapd.so and libapadp.so in the modules subdir of my Apache 1.3.9 installation, but I get the message...
"Cannot load /etc/httpd/modules/ndwfapd.so into server: libapadp.so: cannot open shared object file: No such file or directory".
Do you have any ideas to help me over this hurdle.
Any help is appreciated.
Kirby

OAS 4.0.8 and HTTP Listener Configuration

I have installed the enterprise version of OAS 4.0.8 on both NT 4.0 sp5 and Solaris 2.6 with the appropriate patches as specified in documentation.
On both installs I have the same problem with the http listener. If I select any of the property pages under a listener I get the error message "Page contains no data ..."
The listeners are up and running and I can get to the administrative http listener at 8889 via a browser.
thanks for your help,
don.
[email protected]

Problem solved my nis and dns domains are different and we work from dns. I had to use the oasnetconf utility to correct the machine id such that it reflected the dns domain.
Maybe this should be queried at install time...

OAS 4.0.8 http listener problems

I am running OAS 4.0.8 on NT w/ SP5. I followed the instructions for install in the latest (Jan 2000) release notes. The problem I am having is with the listeners. The admin and www default listeners start up fine, but if I create a new listener, it will not start up. The error message tells me to check the NT Event log but there is nothing there. Also there is no svwww.err file available to check because it never starts!
I am completely lost on this one. Any help is appreciated.
Thanks

Try to use root for startup. Remember that port bellow 1024 is protected for root only.
SA

OAS 4.0.8.1 listener

Hi,
When I try to start the OAS listeners I get the following messages:
Information: Listening on NORM port 80 address 0.0.0.0
Information: wriorProcessInit: RMProxy IOR Bootstrap Service initialized
Information: Adapter services initialized successfully
Information: The server started successfully
Server now running as process 1714
OWS-08850: Oracle Web Listener 'www' started.
The problem is that the listener is started on address 0.0.0.0, which is obviously not the correct address.
Does anyone have any suggestions
Thanks
Rob

<BLOCKQUOTE>quote:<HR>Originally posted by Rodgerh:
Rob
I have OAS 4.0.8.1 succefully running on 4 Linux boxes, 6.1 and 6.2.
All of them display the same message during startup. The ip address 0.0.0.0 in the message is normal.<HR></BLOCKQUOTE>
Do you have Oracle 8i installed on the SAME MACHINE as 4.0.8.1?
Thanks.
null

OAS listener

Similar Messages

Maybe you are looking for