OAS407 and Oracle815/816 Package Problem

Hello !!
I have this weird problem ....
I am using the PLSQL cartridge
It is a registration form with about 27 parameters to be accepted from the user validatd thur javascript and then inserted into the Oracle Database.. Thats it that simple.
My code Runs perfectly on the OAS407. Oracle805 combination without any errors
When I upgraded to 815 the following errors where seen in the Event Viewer of NT and the Browser respectively.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Following error in the Event Viewer
The description for Event ID ( 0 ) in Source ( OracleWRBService ) could not be found. It contains the following insertion string(s): 07-02-1999 14:03:20 0 java1 `ehtapp/ehtcart Cartridge` 324 1 0x400fff ` Value[0]: `
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++
Following error in the Browser
Request Failed
We were unable to process your request at this time.
Error occured while accessing
"/iis/eht/reg_pk.mt"
at Fri Jul 02 14:03:13 1999
OWS-05101: Execution failed due to Oracle error -6513
PL/SQL Cartridge SERVICE: ehtapp/ehtcart
PROCEDURE: reg_pk.mt
PARAMETERS:
===========
RUNAME_IN:
vendor
RPASSWORD:
12345
REPASSWORD:
12345
RHINT_Q_IN:
Hint Question
RHINT_A_IN:
answer
RDFNAME_IN:
fname
DMNAME_IN:
Middle Name
RDLNAME_IN:
lnamw
REMAIL:
[email protected]
RDADDRESS1_IN:
address
DADDRESS2_IN:
RDCITY_IN:
mumbai
RDSTATE_IN:
Maharashtra
RPIN:
38383838
RDCOUNTRY_IN:
indisa
RHPHONE:
222222222
ROPHONE:
222222233
FAX:
MOBILE:
SSN1:
SSN2:
SSN3:
PAGER:
SOURCE_IN:
OTHER_IN:
DEGREE_IN:
DEGREE_MJ_IN:
TYPING_SPEED_IN:
WORKPROC_SKILL_IN:
NeverUsed
RRATELINES_IN:
10
SPEC_IN:
none
1
2
3
OTHER_SPEC_IN:
EMPLOYERNAME_IN:
EMPLOYERADDRESS_IN:
FROMMONTH_IN:
0
FROMYEAR_IN:
19
TOMONTH_IN:
0
TOYEAR_IN:
19
DUTIES_IN:
EMPLOYERNAME1_IN:
EMPLOYERADDRESS1_IN:
FROMMONTH1_IN:
0
FROMYEAR1_IN:
19
TOMONTH1_IN:
0
TOYEAR1_IN:
19
DUTIES1_IN:
COMMENTS_IN:
Please try again later
Kindly mail or reply to this message for the solution or a tip through which I can solve the problem
null

Biganon,
If you are willing to experiment, you could try the following simple xorg.conf:
Section "Device"
Identifier "Configured Video Device"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
DefaultDepth 24
EndSection
This minimal xorg.conf is only needed because xorg must be told to use the nvidia drivers.
It should figure everything else by itself.
For the Keyboard and mouse handling, install xf86-input-evdev, if not already there.
Start hal from the daemons Line in /etc/rc.conf:
DAEMONS=(syslog-ng network netfs !dbus hal ....
For the Keyboard layout, copy the file:
/usr/share/hal/fdi/policy/10osvendor/10-keymap.fdi
to
/etc/hal/fdi/policy/10-keymap.fdi
and edit this copy as follows:
<merge key="input.xkb.layout" type="string">ch</merge>
<merge key="input.xkb.variant" type="string">fr</merge>
I don't particularly appreciate this fdi thing, but, from experience, letting a particular
Desktop/Window Manager manage the keyboard layout is even worse.
Further info at:
http://wiki.archlinux.org/index.php/Xor … otplugging
Needless to say, if you try this, backup your original xorg.conf.
Mektub

Similar Messages

  • TS1702 I purchased 2 packages of gems for skylanders and only received 1 package. Got email receipts and tried to report problem on ipad2 and it keeps coming up with to many https redirects. Can anyone help? Just want my gems :).

    I purchased 2 packages of gems for skylanders and only received 1 package. Got email receipts and tried to report problem with link in email on my ipad2 and it keeps coming up with to many https redirects. Can anyone help? Just want my gems :).

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • App-V 5.0 SP2 and Office 2013 Publishing Problem

    Hi
    I have a big problem with app-v 5.0 and Office 2013, the thing is that I have published it globally to a RDS servers in my farm and I have 4 different configuration xml's to publsih the package. I'm also using app-locker to prevent the users that are not supposed
    to have the package doesn't get it published. That is working fine.
    The default configuration xml is to publish the package to the computer with Excel, Word, Outlook, Powerpoint, onenote and Publisher and create shortcuts to All Programs.
    I have 1 user configuration xml to a group (group 1) that has the default configuration but including 3 shortcuts to the desktop, Excel, Word and Outlook. I have another user configuration xml to group 2 that has all the application and all the shortcuts in
    Office 2013 Pro and 4 shortcuts to the desktop. I have 1 user configuration xml for Excel only and another one for Word only.
    This has been working well for 2-3 days but now users are getting error "The application failed to launch. The application belongs to a packages or a connection group that is scheduled to be unpublished. Error code: 0xA7E0E502-00000516".
    And the Office 2013 is pending to unpublish globally on all servers even though no one has done anything except log in or log out.
    What am I doing wrong, there are no connection groups on the app-v server but there where 2 or 3 long time ago and have been deleted.
    Kind Regards
    Kristján R. Halldórsson
    Best Regards Kristjan R. Halldorsson

    I ran the get-appvclientconnectiongroup -all on my servers and there where none listed.
    I have also enabled the Virtualization Subsystem debuglog on the client and I'm not finding any error that might relate to this problem.
    The thing is I had a group policy enabled that said Enable Global Refresh on Logon = true but I changed that to false and published the package again globally and I'm just waiting now to see if the package goes to unpublish state as it did before. 
    Best Regards Kristjan R. Halldorsson

  • HP Photosmart 2610 All in One Printer Paper feeds OK but the software and sensors are a problem

    HP Photosmart 2610 All in One Printer   Paper feeds OK but the software and sensors are not allowing paper to feed until several steps are taken first.
    (I am using Windows 7.  I also use the virtual XP mode and mostly MS Office 2003 docs). 
    I have had this printer for several years and love it.  Before I toss it out, I thought I would check if I could get it to work properly before I buy another printer.  Note: I did put in a new HP black cartridge (because it was out of ink) but the printer was not working properly for several days before I changed the cartridge. The printer was at step 5 before ink change.
    Lately, each time I turn on my printer, I have to go through the same routine
    1. The printer wants to align the cartridges so I push OK
    2. The paper feeds into the printer and stops at the exact place to start printing.
    3. Error message appears that it is out of paper.  So I press OK to continue.
    4. It says "aligning print cartridges" runs through 2 sheets of blank paper without trying to do anything and then states "cartridge alignment failed"  "Press OK to continue"
    5. Screen is now normal and it appears it is going to work.
    6. It makes no difference if I used the copy function OR when I send a print job from the computer, the paper feeds into the printer and stops at the exact place to start printing but nothing happens.
    7. Error message appears that it is out of paper. OR that it is the wrong size paper.  I pull the paper that was at the proper place to be printed from the printer and then the error message says "Paper jam.  Press OK to continue"
    8.  I press OK.  The printer will then quickly feed in and eject 2 sheets of paper before it will actually start printing the print job.  It will work fine after this as long as I print from the same document.
    9. If I want to print a different document then I have to start all over again at step 6 to get the printer to work.  If I shut the printer off I have to go back to step 1.
    What I have already tried
    A.  Uninstalled and reinstalled the printer driver direct from HP web site.  I have done this several times with both the basic driver download and the complete package download.
    B.  I have done a partial reset by unplugging the printer, and then re-plugging the printer while pushing the  "# and 3" buttons while turning on the printer.  I have done this several times.  Each time it will work fine until I try a different document of turn off the printer.
    C. I have downloaded the HP Print and Scan Doctor and used it several times.  It states that "everything checks out OK"
    D. I have downloaded the HP Hardware Diagnostic Utility 4.0 but it does not work with my printer.
    E.  I have cleaned all the rollers and blown air throughout to make sure there were no bits of junk in the paper's path or blocking a sensor.
    F.  I have tried different brands and weights of paper (all 8½  x 11) but nothing works.
    Most of the problems started when I added the printer to the virtual machine so I could print XP files.  This may just be a coincidence because the printer has the same problems when I use the copy function without the computer being on.
    Thanks for looking at my issues.  Any help would certainly be appreciated.

    I just tried using Notepad as you suggested and had the same result.  Paper feeds in stops at proper place and error message "out of paper" 
    I just put in two new HP ink cartridges because the other two were low and I was told that this might be the problem. 
    I seem to remember that the HP 2610 shows 2 "ink icons" in the lower left corner.  One for black and one for color.  The ink icons would change from completly full to just an outline as the amount of ink went down.  Currently the black ink icon is missing
    This is a very frustrating problem because the printer works great after doing a few steps to get around the problem.  The fact that the problem reoccurs any time anything is changed is the major problem
    Most of the problems started when I added the printer to the Windows 7 virtual machine so I could work with Windows XP programs.  This may just be a coincidence because the printer still has the same problems when I use the copy function without the computer even being on.
    I want to thank you for all of your efforts.  Perhaps this is a unique problem that will never be solved and it is best to take my losses and buy a new printer.  As a last chance, if possible, could you refer my post to someone who is an expert with the HP 2610 printer.

  • Adobe Photoshop Elements 2 and 'Save for Web' problem

    Hi everyone,
    I have used Photoshop Elements 2 for some time with absolutely no problems. However when I try to use the save for the web option I get an 'export could not be completed due to a program error' message.
    Nothing relevant is mentioned on Adobe's support site. After having gone through the usual 9 troubleshooting procedure I suspect that there is a problem with the 'Save for Web EL' plugin located in the PE 2 plugins folder. Has anyone else experienced this? Is there a way I can somehow find a functional plugin?
    Thank you for reading this post.
    PowerBook G4 DVI 667   Mac OS 9.2.x  

    I don't use Photoshop elements myself, but from Photoshop CS it works fine. I use JPG compression and optimization. First of all - make sure the file format extensions are all available. Applications/adobe/photoshop elements/file formats AND ALSO Applications/adobe/photoshop elements/photoshop elements only/file formats (here I am assuming the paths are the same or similar to Photoshop). Also, check the extensions disabled folder (Control click on Photoshop and go to package contents). If it's none of these, I suggest you check the settings in Elements when trying to save and make sure you are not using an option that conflicts.
    Also, check the Adobe forum. http://www.adobeforums.com
    Check for software upgrades also.
    You do have enough hard drive space and RAM I assume. If you are using PS Elements and virtual memory is on, you may not have enough phsyical space to save the file (but not likely)
    P.S. I see (after i wrote) that you are running 9.2.2 - so the paths will not be the same as if it was on OS X - but they will be similar.

  • How to resolve AVCHD package problem in mountain lion

    how to resolve AVCHD package problem in mountain lion

    Thanks, David. I know this workaround. And one more with creating right-click Service. That's why I've used "uncomfortable" instead of "impossible". In my opinion, Apple should leave ability to choose OS's behavior, and I hoped somebody knew where to find it .

  • Compiling and running a package

    Hi
    Iduring making a project i am facing a problem. I have two files under the directory c:\jdk1.3\ghosh\das, named as ghosh.java and das.java
    they are like the folloing:
    ghosh.java
    package.java.das;
    import java.io.*;
    import.java.util.*;
    public class ghosh
    public static void main(String args[])
    das dipak = new das();
    dipak.prn();
    das.java
    package ghosh.das;
    import java.io.*;
    import java.util.*;
    public class das
    das();
    public void prn()
    System.out.println("Package");
    If you please tell me the way to compile and & run this package, I will be highly thankful to you.
    thanx in andvance.
    sudipta

    The statement "package.java.das;" won't compile. Do you mean "package java.das;" or do you mean "package ghosh.das;"? The -d option might not give you the result you want. If you mean, ""package java.das;" and you compile with "-d c:\jdk1.3" then the compiler will create a directory named java in the jdk1.3 directory and create a .class file inside the java directory.
    Depending on the package statement, you execute the ghosh class with "java java.das.ghosh" or "java ghosh.das.ghosh"

  • BPC 7 SP3 and Import Excel package

    Hi,
    I use VPC 7 SP3 (with SQL Server 2005) and I have some problems with the standard package named "Import Excel". The following error is returned:
    Package Error Events: 
    ErrorCode = -1073450901
    Source = ExcelToText
    SubComponent= DTS.Pipeline
    Description = "component "EXCELFILE" (1)" failed validation and returned validation status "VS_NEEDSNEWMETADATA".
    Here is the parameters:
    %XLFILE%     /ECOS/COMPTABILITE/DataManager/DataFiles//EXPORT_COMPTABILITE.XLS
    %SHEET%     COMPTABILITE_CIBLE
    %COLUMNS%     
    %TRANSFORMATION%     /ECOS/COMPTABILITE/DataManager/TransformationFiles//Transf_JDE_Compta_Actual.xls
    %CLEARDATA%     1
    %RUNLOGIC%     0
    %CHECKLCK%     0
    Any ideas?
    thanks,
    Romuald

    Hi,
    here is more information. The Excel file I try to load has different columns from the standard ones (I have an HYP dimension and no INTCO dimension). I have specified the list of columns in the package parameters interface. It seems that these values are not used by the package. I think that the package waits for a file with the standard columns, no less, no more. It works fine with BPC 4.2 (I use the standard Import Excel package and the file is well loaded).
    thanks for your help,
    Romuald

  • Info Package Problem

    BW Gurus,
    I am facing a weird problem in the info packages.
    I am trying to pull data from SAP 3.1i system and my info package is set to "Full update". I am interested in one sales document. When I enter that sales document in the data selection screen of the info package and hit the check button, it just vanishes displaying a zero!!!!!. the document does exist in SAP 3.1i. Has anybody seen this weirdness in info packages?
    Thanks
    Ashwin

    can you do the same selective extraction in RSA3 in the source system? you may need to check there first.

  • CS4 Package Problem

    Hi Everyone,
    In CS3 I used to package a document and it would work perfectly, I'd have a folder with all links in, all fonts in and the .indd file. I could then archive the job and everyone was happy.
    I have recently upgraded to CS4, and went to package a job I have just finished. I have no idea why, but when I package the document, I get a folder that I name, I get the fonts in a folder but no graphics folder of items relating to the job.
    I have read the help, but it doesn't answer the question.
    When I package I tick the box which asks to move the graphics, but it just doesn't do this.
    Anybody got and answers to this question which is driving me mad?
    Kind Regards,
    Charlie

    The problem isn't restricted to files with \ or / in their, names. Happens with any character that would be considered "illegal" in a Unix path.
    The 6.0.4 update should have solved it, but try resetting your prefs: see Replace Your Preferences
    And double check that the copy links box is really checked....

  • Apparent SDL package problem

    I installed kdenlive and mlt from community and have a problem with the configuration. A dev on the kdenlive IRC channel said I should ask the mlt devs who in turn said it must be a SDL packaging problem. So I'm here now with this bit:
    #kdenlive
    [19:38] <dust__> need some help getting this program started
    [19:43] <dust__> says it can't find melt or SDL profiles and module
    [19:43] <dust__> but when I run it as root everythings OK
    [19:46] <xzhayon> distro?
    [19:47] <dust__> Arch. I installed both mlt and kdenlive from community repos
    [19:49] <xzhayon> run melt -query consumers 2>&1 | grep sdl
    [19:49] <xzhayon> and show me the results
    [19:49] <dust__> - sdl_image
    [19:51] <dust__> when I run that as su I get this
    [19:51] <dust__> - sdl - sdl_audio - sdl_preview - sdl_still
    [19:53] <xzhayon> as su?
    [19:53] <xzhayon> but that's the output of query consumers
    [19:56] <dust__> just that Im getting different output as su than user
    [19:57] <xzhayon> what's the output of melt -query consumers 2>&1 | grep sdl not run as su?
    [19:57] <dust__> - sdl_image
    [19:58] <xzhayon> that's definitely wrong
    [19:58] <xzhayon> try reinstalling mlt
    [19:58] <dust__> did that at least twice
    [19:59] <dust__> 0.5.10
    [19:59] <dust__> kdenlive 0.7.8
    [20:01] <xzhayon> may i see the pkgbuild for this package?
    [20:03] <dust__> http://repos.archlinux.org/wsvn/community/mlt/repos/community-x86_64/PKGBUILD
    [20:12] <xzhayon> im' sorry but i have no clue on what's happening
    [20:15] <dust__> please tell me what the output above means briefly
    [20:17] <xzhayon> well, that shows the producers and consumers available to melt
    [20:17] <xzhayon> but that's not the expected output
    [20:17] <xzhayon> what you see with "su"
    [20:18] <xzhayon> i what should appear when run as normal user
    [20:18] <xzhayon> while what you see when run as normal user
    [20:18] <xzhayon> is what you should see when querying producers, not consumers
    [20:18] <xzhayon> try asking on [email protected]
    mlt-devel replied as follows:
    Perhaps ask the SDL packager; I doubt the MLT packager will be of much
    help. This appears to be some permission issue with SDL and its access
    to things. Maybe you need to add your account to some groups. Does
    ffplay at the command line work? It too uses SDL. If that does not
    work either, then perhaps 'strace melt -query consumers'. strace is a
    very verbose output, but it might show what it is failing to access.
    any thoughts?

    allan@mugen ~
    > melt -query consumers 2>&1 | grep sdl
    - sdl
    - sdl_audio
    - sdl_preview
    - sdl_still
    Maybe try creating a new user and see if it works for them.

  • Using ant to build and deploy plsql packages to a 11g wls.

    Hi all,
    Not sure is this is the right place, but I found a few other threads in this forum regarding plsql and ant, so I'll try this one.
    My firm is moving from 10g ADF applcations to 11g SOA applications. When I'm not busy being lost in the whole new SOA world, I also have the pleasure of building our ant scripts. :-)
    It has been years since I looked at the deploy scripts I made for 10g, so I'm a bit rusty.
    I used wsassemble in our old scripts and I used http://download.oracle.com/docs/cd/B25221_05/web.1013/b14434/wsassemble.htm as a reference. But I can't seem to find the same documentation for 11g? I tried http://download.oracle.com/docs/cd/E12839_01/index.htm but it doesn't seem to have anything about plsqlAssemble, genInterface, genproxy etc. for 11g wls servers? I also tried google a while to no avail.
    For example, I'm having problems setting the values for the ant-oracle.properties.
    So can someone please throw some links my way, so I can read how to build and deploy plsql packages to a 11g wls server using ant? Thanks!
    Cheers,
    William

    Hi,
    Did you ever find an answer to this question ?
    I am currently creating the webservice using webservices assembler from 10g/OC4j, then using the SmartUpgrade tool to re-engineer the webservice for deployment to 11g
    ( SmartUpgrade info here http://docs.oracle.com/cd/E16764_01/doc.1111/e15878/intro.htm)
    G
    Edited by: user999097 on Mar 5, 2012 1:16 PM

  • Simple (not for me!) package problem.

    I was hoping someone could help me with this one! I guess its pretty simple, but this is the first time Ive tried to make a package.
    I have an app like so:
    theApp\testPiece.jsp
    theApp\WEB-INF\classes\sql\
         piece1.java
         piece2.java
    Both piece1 and piece2 have "package sql;" at the top.
    piece2.java references piece1.java. I can compile piece1.java no worries. However, If I have piece2 in theApp\WEB-INF\classes\ directory it compiles, if I have it in the sql directory it says "cannot resolve symbol".
    piece2.java has "package sql" at the top, so shouldnt it be able to see piece1? How come it only sees it if its in the parent directory?!
    Also if I have it in the parent directory, I can not reference it as sql.piece2... Is it a class path thing? if so, what should the javac statement look like? Ive been searching this forum for hours, and I keep finding variations on my question, but I am really stuck! Please Help!!!
    Thanks,
    nmoog

    Hello nmoog,
    I've only been using JavaBeans and packages for about a year, but saying that 2 years ago before I started university programming was a foreign concept altogether.
    I do not mean to be condescending, but I doubt you'll find much with respect to packaging and compiling on the Sun site. Perhaps if you look at the Java tools documentation in your SDK distribution. Thats what I use to read to figure out compiling and package instructions:
    C:\j2sdk1.4.1_02\docs\tooldocs\tools.html
    or
    http://java.sun.com/j2se/1.4.1/docs/tooldocs/tools.html
    if you don't have the documentation on your hard drive.
    In particular read the parts about javac.
    Reading it myself, I realise you have to specify packages like a normal path name when compiling - you will understand when you read it.
    It is trivial, but at the same time it is a major hinderence to your progress. Once you get past it, I reckon you'll pick up the pace of programming quite quickly. Don't overlook the tutorials, they are the best source of information for learning - while these forums along with Ask.com and Google are the best means of problem solving.
    What web-container are you using? I am currently using Resin, but I may switch to Tomcat at some point in the future. Read the documentation for the web-container you are using. They have their diffences, but they use WAR web-archives and these all have the same structure:
    Lets say your web application is called project. Arrange it like so:
    project - contains html and jsp files
    project/WEB-INF - contains java (source) files, i think
    project/WEB-INF/classes - will contain class files
    project/META-INF - contains the archive manifest
    Treat JavaBeans like you would any other java or class file - they are nothing special. Run the following instructions on the command-line:
    C:\project\WEB-INF>javac -d classes <list of all your java files>
    C:\>jar cvf project.war -C project .
    Now simply place project.war in the webapps folder of your web-container, and start your web-server.
    Assuming you haven't changed anything in you resin.conf or web.xml file browse to
    http://localhost:8080/project
    and your index page should be retrieved automatically as if you browsed to
    http://localhost:8080/project/index.jsp
    I don't know if this is more or less than you wanted to know, but I hope it has been of some use.
    I'm watching so hola if you wanna ask anything else
    Darren B
    e-mail: [email protected]

  • DV6-3122us/ after and during Factory restore problems

    This is a DV6-3122us 64 bit notebook, 500GB hard drive, 4 GB ram, Windows 7 Home Premium OS. I restored it from the Factory purchased recovery discs, and I had a problem with that, had to do it 3 times kept locking up at 9% on the restore part. It finally went through then said couldn't install, turned it off, and it was installed. This is Windows 7 Home Premium. Now I have lock ups when updating. The HP assistant  loads but says it has errors at the very top, and doesn't show the system information at the bottom. The hard drive only shows 80 GB allocated, and 397 unallocated. This is all the original hardware, which has been tested and has passed, memory has passed. Any Help would be greatly appreciated.

    1. Right click on the partition ( C:\ ) you want to Extend into the now unallocated partition and click on Extend Volume.
    2. Click on Next for the Welcome to the Extend Volume Wizard window
    3. Select the amount of space in MB you want to use from the unallocated partition to use to Extend this partition
    4. Select all of the available space .
    5. Click on Next.
    6. Click on Finish in the Completing Extend window
    You will now see the Disk Management console with the new extended partition volume ready to be used.
    7. Close Computer Management.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud.  I get a message on my phone that says " the URL you are requesting is not found on this server".  Pics and videos have been deleted too.

    I recently had to swap out my iphone 4s and I am having problems restoring photos and videos from icloud.  When I restored my phone from icloud, half of my pics and videos have been deleted, the pics that were restored on my phone are very blurry, and the videos won't play.  I get a message on my phone that says " the URL you are requesting is not found on this server".  I have erased and reset my phone twice, but every time I do it, more pics and videos are deleted.  I have backed up to icloud and iphoto, however, some of the pics are no longer on iphoto either.  Is there someway to get the videos to play on my phone again?  Make the photos not as blurry as they are now and to restore the pics and videos that have been lost?  I really would love to have them back, this phone is supposed to be the best and right now it doesn't seem to be.  Please help if you can.

    I too have noticed that once i restored from iCloud. Pictures blurry and videos wont play!
    Need help too!!

Maybe you are looking for