Obaccess.dll causes link error on hot deploys

I'm doing web services development with AccessServerSDK, Glassfish v3, on windows XP using Eclipse. It works fine except whenever I change my code and eclipse attempts to hot deploy the application, the following error occurs and the deploy bombs:
"org.apache.catalina.LifecycleException: org.apache.catalina.LifecycleException: java.lang.UnsatisfiedLinkError: Native Library C:\NetPoint\AccessServerSDK\oblix\lib\obaccess.dll already loaded in another classloader"
It seems that the obaccess.dll reloads without checking whether if it is already loaded. The only way to redeploy the application is to shutdown Glassfish and restart it for every change I make. It's impeding my progress.
So far I've tried the following:
--removing jobaccess.jar from inside my application and putting it into Glassfish_HOME/domain/domain1/lib; it didn't help.
--put an ObConfig.shutdown before the ObConfig.initialize; it didn't help.
--catching the exception and ignoring it, but then the application gets a null pointer exception when it runs.
I can't find anyone else in cyberspace complaining about this problem. I hope it isn't an issue with Windows because we do all our development on our desktops, but I wouldn't be surprised.
Anyone else having this problem or found a fix for it?

Hi,
I already faced with this problem on WLS11gR3 (10.3.4) and I try with all your workaround.
The solution I found was to install on separate server chain in order to reboot the server instead of use Hot Deploy.
We have also think to migrate the application to J2SE.
It seam that it is not possible to remove Jni 'till jvm is up and running.
Wile summer have you found any solution?

Similar Messages

Obaccess.dll causes link error on hot deploy

I'm doing web services development with AccessServerSDK 10G, Glassfish v3, on windows XP using Eclipse. It works fine except whenever I change my code and eclipse attempts to hot deploy the application, the following error occurs and the deploy bombs:
"org.apache.catalina.LifecycleException: org.apache.catalina.LifecycleException: java.lang.UnsatisfiedLinkError: Native Library C:\NetPoint\AccessServerSDK\oblix\lib\obaccess.dll already loaded in another classloader"
It seems that the obaccess.dll reloads without checking whether if it is already loaded. The only way to redeploy the application is to shutdown Glassfish and restart it for every change I make. It's impeding my progress.
So far I've tried the following:
--removing jobaccess.jar from inside my application and putting it into Glassfish_HOME/domain/domain1/lib; it didn't help.
--put an ObConfig.shutdown before the ObConfig.initialize; it didn't help.
--catching the exception and ignoring it, but then the application gets a null pointer exception when it runs.
I can't find anyone else in cyberspace complaining about this problem. I hope it isn't an issue with Windows because we do all our development on our desktops, but I wouldn't be surprised.
Anyone else having this problem or found a fix for it?

Hi,
I already faced with this problem on WLS11gR3 (10.3.4) and I try with all your workaround.
The solution I found was to install on separate server chain in order to reboot the server instead of use Hot Deploy.
We have also think to migrate the application to J2SE.
It seam that it is not possible to remove Jni 'till jvm is up and running.
Wile summer have you found any solution?

Linker error during TestStand deployment

Using Version - LabVIEW 2014 and TestStand 2014
Test Stand deployment failed so I am trying to narrow down the issue.
Note:
1. Create Installer option is not selected
2. Everything has been mass compiled in LabVIEW 2014
Step 1 -
1. Selected Folder A which has around 70 LabVIEW controls
2. Build is successful
Step 2 -
1. Selected One single VI from Folder B
2. Build Successful
Step 3 -
1. Selected that same VI from Folder B and Selected Folder A (combining step 1 and 2)
2. Build Fail
"LabVIEW returned a linker error but did not return any missing VIs. This can mean that the missing files are RC files or other similar dependencies. Mass compile your top-level files and resolve the errors reported. If the problem persists contact National Instruments for support."
Other than "Enable SSE2 Optimization" none of the options are selected from LabVIEW VI Options.
Any idea?
Thanks,
VS

This may be useful:
http://digital.ni.com/public.nsf/allkb/19F78E0B290BFA63862574F8005A9303

Assertion Error during hot deployment in WLS6.1

Hi,
I am using WLS6.1SP2. The hot deployment feature is enabled. But when I try to
redeploy the bean, it gives the following
assertion error. Somehow the hot deployment doesn't seem to work.
Following is the stack trace:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ must initialize bef
ore invoke ]
at weblogic.utils.Debug.assert(Debug.java:84)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:218)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy100.isMyDHLOnlyUser(Unknown Source)
at com.dhl.network.wsi.login.web.LoginServlet.doPost(LoginServlet.java:3
47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at com.dhl.network.wsi.foundation.web.BaseServlet.service(BaseServlet.ja
va:842)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ must initialize bef
ore invoke ]
at weblogic.utils.Debug.assert(Debug.java:84)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:218)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy100.isMyDHLOnlyUser(Unknown Source)
at com.dhl.network.wsi.login.web.LoginServlet.doPost(LoginServlet.java:3
47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at com.dhl.network.wsi.foundation.web.BaseServlet.service(BaseServlet.ja
va:842)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.rmi.extensions.RemoteRuntimeException - with nested exception:
[weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ must initialize be
fore invoke ]]
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:60)
at $Proxy100.isMyDHLOnlyUser(Unknown Source)
at com.dhl.network.wsi.login.web.LoginServlet.doPost(LoginServlet.java:3
47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at com.dhl.network.wsi.foundation.web.BaseServlet.service(BaseServlet.ja
va:842)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
throwable exception in BaseServlet weblogic.rmi.extensions.RemoteRuntimeExcepti
on - with nested exception:
[weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ must initialize be
fore invoke ]]
throwable exception message null

Are you deployed in an EAR? If so, this is probably a hot redeploy bug.
Report to [email protected].
Peace,
Cameron Purdy
Tangosol, Inc.
Clustering Weblogic? You're either using Coherence, or you should be!
Download a Tangosol Coherence eval today at http://www.tangosol.com/
"Atul Sapkal" <[email protected]> wrote in message
news:[email protected]...
>
Hi,
I am using WLS6.1SP2. The hot deployment feature is enabled. But when Itry to
redeploy the bean, it gives the following
assertion error. Somehow the hot deployment doesn't seem to work.
Following is the stack trace:
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ mustinitialize bef
ore invoke ]
at weblogic.utils.Debug.assert(Debug.java:84)
atweblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:218)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy100.isMyDHLOnlyUser(Unknown Source)
atcom.dhl.network.wsi.login.web.LoginServlet.doPost(LoginServlet.java:3
47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
atcom.dhl.network.wsi.foundation.web.BaseServlet.service(BaseServlet.ja
va:842)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2495)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ mustinitialize bef
ore invoke ]
at weblogic.utils.Debug.assert(Debug.java:84)
atweblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteR
ef.java:218)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy100.isMyDHLOnlyUser(Unknown Source)
atcom.dhl.network.wsi.login.web.LoginServlet.doPost(LoginServlet.java:3
47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
atcom.dhl.network.wsi.foundation.web.BaseServlet.service(BaseServlet.ja
va:842)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2495)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
--------------- nested within: ------------------
weblogic.rmi.extensions.RemoteRuntimeException - with nested exception:
[weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ must
initialize be> fore invoke ]
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:60)
at $Proxy100.isMyDHLOnlyUser(Unknown Source)
atcom.dhl.network.wsi.login.web.LoginServlet.doPost(LoginServlet.java:3
47)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
atcom.dhl.network.wsi.foundation.web.BaseServlet.service(BaseServlet.ja
va:842)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:2495)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
throwable exception in BaseServletweblogic.rmi.extensions.RemoteRuntimeExcepti
on - with nested exception:
[weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ must
initialize be> fore invoke ]
throwable exception message null

.engine / .forms dll causes confusing errors

Post Author: Tobias Boehler
CA Forum: .NET
Hello thereI've got a big problem, but first I give you some informations:Our reports are developed in CR 9.2Our reportingTool uses the Crystal-DLLs for rendering and presenting the report in the CrystalViewer.The File-Version of the DLLs is Assembly Version 9.2.3300 File Version 9.2.9500.2, the reportingTool is developed in VS2002 (.NET Framework 1.1.4322)In this version everything works really fine.Now we want to change to VS2005 (.NET Framework 2.0.50727)After several adjustments, which where necessary because of the conversion, I get really confusing errors.o something like "invalid job number" o something like "you have tried to read / write in protectet memory. the cause could be corrupt memory"o a crystal window asks me to set the report parameters again.The prolbem is, this errors are raised in totally irregular tests. I'have no idea whats the cause. Sometimes the error appears, sometimes not. Sometimes they are combined. Sometimes I get no errors. I've heard, there is a newer DLL version espacially for VS 2005 -> Assembly Version 9.7.3500.0 (no file version).Where can I get this DLLs and how is the licensing for that?Please help me. This is urgent! Thanks in advance, Tobi

Post Author: Tobias Boehler
CA Forum: .NET
I'm using the professional edition.In my project I'm using the followin DLLs. While debugging i got another Error:DLL CrystalDecisions.CrystalReports.Engine CrystalDecisions.CrystalReports.Engine.dll is attempting managed execution inside OS Loader lock. Do not attempt to run managed code inside a DllMain or image initialization function since doing so can cause the application to hang.To this error i found in another forum that i'm using a wrong crystal-dll-version.The FileVersion 9.2.9500.2 doesn't work in VS2005. I can't find the link to this thread again.can you confirm this?

Windows API dll (user32.dll) cause fatal error

Hi,
On a setup, we using a touch screen. The LabView Software is running on full screen. I need to deactivage my front panel if the screensaver is on to prevent user start anyting. I use SystemParametersInfoA from user32.dll and this is working good, except, if I quit the software. "myexe a fin a error and need to close" (someting like that, my XP is in french).
I don't have issues in debug mode, this error happen in exe mode.
I use LV 8.6.1. Do you have any idea why?
Thank you
Solved!
Go to Solution.
Attachments:
test.zip ‏10 KB

CFiset wrote:
Thank, I will take care of this details. But, unfortunly, this not working.
uint32_t SystemParametersInfoA(uint32_t SPI, uint32_t 0, uint32_t *value, uint32_t False);
SPI = 114 = SPI_GETSCREENSAVERRUNNING
If *value != 0, screensaver ON, else scresaver OFF
Still have the fatal Windows error.
Thank
I noticed the Call Library Node having a rather strange path to user32.dll on the initial load. Do you happen to have copied that DLL somewhere and referencing it with full path in your VI?
That is a very big NO-NO! user32.dll and many other Windows system DLLs do weird things to the system and are utterly bad behavioured if you try to load another copy from somewhere else on disk than the system directory. Just change the library name to user32.dll only and let Windows pick the right DLL from its system directory.
Another problem with specifying the full path to a copy of such a DLL is that LabVIEW will think you need to have this specific DLL in a built application and will include it in the build. However your user32.dll is almost 200% VERY incompatible to just about any other Windows system out there, because of Windows version, Service Pack, and bug fix upgrades as well as different language versions of Windows.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Standalone OC4J 9.0.4 - Loading sapsoext.dll - Unsatisfied Link Error

Hi,
I was trying web based ssosample.jsp in a Standalone OC4J 9.0.4.
The problem i am facing is java.lang.UnsatisfiedLinkError:getVersion()
The call to load sapsoext.dll via System.loadLibrary() is successful. However when I attempt to call any method on it, it fails with UnsatisfiedLinkError.
So why is it that the call to loadLibrary is successful but the call to actual function is failing?
This works fine when i run the satndalone ssosample from the command line. but the problem occuring when i deploy and run jsp sample using OC4J.
Is this a path problem, if so how do I configure it in OC4J standalone.
I have tried setting Variables like PATH, java.library.path, LD_LIBRARY_PATH none of them seem to have any effect on this.
I tried debugging using a windows file monitor. The library DLL1 is being read from the correct path and is being opened successfully.
Platform Windows 2000, JDK 1.4.2
Any suggestions will be greatly appreciated.
Karunya.

Finally We could able to find what was the issue.
>>call to loadLibrary is successful but the call to
>> actual function is failing
This is because assigning a package structure to the SSO2Ticket and trying to call its native methods.
So, the JNI calls resulting with UnsatisfiedLinkError as the JNI export functions bound to this class
would be of the name JAVA_SSO2Ticket_<FUNCTION> instead of JAVA_<PACKAGE>_SSO2Ticket_<FUNCTION>
In Actual SSO2Filter sample the class SSO2Ticket present in the default package (a class which is not associated with any package).
The approach i have followed to load this SSO2Ticket class which doesn't have package structure is
Loading the class using class.forname() and then used reflection api to invoke methods on it.
i) What are the other approaches ? How other people are using SSO2Ticket.java when calling from a another Java file?
ii) In the Latest versions of sample, Is SSO2Ticket available with package structure?
Any body have an idea?

-xmodel=medium causes linker error

I'm having problems with the -xmodel=medium compiler option under SuSE Linux 10.0. The trouble maker seems to be common blocks that do not appear in block data modules. Consider the following test case, which obviously does not require the option:
program small
real a, b, c
common /dummy/ a, b, c
a=5.
b=sqrt(a)
c=a*b
write (6,*) 'Go Away!', a,b,c
end
c
C block data
C real a, b, c
C common /dummy/ a, b, c
C data a/5/
C end
With the block data uncommented, life is good, compilation and execution look like this:
othello<208> sunf95 -xmodel=medium -o small small.f
othello<209> small
Go Away! 5.0 2.236068 11.18034
With the block data commented out, as above, compilation/linking (it's /usr/bin/ld) fail:
othello<215> sunf95 -xmodel=medium -o small small.f
small.o: could not read symbols: Bad value

When I inspect the object file using nm, I find that the common
block, whose linker name is dummy_, is being generated as an
absolute symbol instead of a common symbol when -xarch=medium
is specified. It is OK when -xarch=small is specified.
Bob Corbett

User32.dll Causing Error on Application Exit

I have an application built into an exe with LabVIEW 8.2. It uses 1 simple call to user32.dll to determine if caps lock is on. When I build the application, it copies user32.dll to the 'data' subdirectory of my application. Everything works fine, however when I exit the program it throws a Windows error, "... has encountered a problem and needs to close..."
Now the fun part. If I remove user32.dll from this directory, everything works fine. I guess it just goes out and finds the original user32.dll in the system directory and there are no errors when I exit. Replacing the file in \data causes the error again.
The simplest thing would be to remove the call in my program as it isn't absolutely necessary (it just shows a warning when entering a password if caps lock is on), but there seems to be something weird going on because it only throws the error when using the dll it copied.
Is there any way to stop the application builder from copying dlls? I couldn't find anything.
Is there a way to force LabVIEW to release and cleanup any dlls it is using? If I could do this when the user exits, maybe whatever is causing this won't get left behind.

Marc A wrote:
I have an application built into an exe with LabVIEW 8.2. It uses 1 simple call to user32.dll to determine if caps lock is on. When I build the application, it copies user32.dll to the 'data' subdirectory of my application. Everything works fine, however when I exit the program it throws a Windows error, "... has encountered a problem and needs to close..."
Now the fun part. If I remove user32.dll from this directory, everything works fine. I guess it just goes out and finds the original user32.dll in the system directory and there are no errors when I exit. Replacing the file in \data causes the error again.
The simplest thing would be to remove the call in my program as it isn't absolutely necessary (it just shows a warning when entering a password if caps lock is on), but there seems to be something weird going on because it only throws the error when using the dll it copied.
Is there any way to stop the application builder from copying dlls? I couldn't find anything.
Is there a way to force LabVIEW to release and cleanup any dlls it is using? If I could do this when the user exits, maybe whatever is causing this won't get left behind.
You should not copy system DLLs to other systems. That is a recipy for troubles. Make sure to reference user32.dll form inside the Windows System directory in your Call Library Node. LabVIEW will then see this as system library and not include it in the build. Any Windows system will have user32.dll in the system directory so there is really absolutely no need to distribute that with your app, (and actually it is legally not even correct).
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Ucbhook Linking error when compiling simucb.dll

I'm trying to compile a simucb.dll and one of the linking errors is "ucbhook.obj : error LNK2001: unresolved external symbol _gstdwrt". Since ucbhook.c is generated automatically by MarixX and it presumably knows what it is doing, I'm guessing that I haven't included the library that defines gstdwrt in my C++ project. Does anyone know what this library is and where I should look for it? Thanks!
Eric

Thanks for the reply. My first question is: What is an Sa_user.cmd file and what's it look like? Is it like a makefile?
I'm compiling an ugly mixture of C and legacy Fortran code. There is a user code block written in C (which the ucbhook function calls) which calls a Fortran function which then calls other Fortran functions. I don't know what that may do to the complexity of Sa_user.cmd. Currently, I'm learning how to use Microsoft Visual C++ to compile and link all my disparate files into a simucb.dll and I'm mired in the linking errors. Once I have the simucb.dll, I'm gonna stick that in my project directory and let MatrixX do its thing.

How to remove unsatified linking error (dll linking)

hi,
I am having a problem while using Jbuilder4.0 that when i include a dll file and the java file that calls it. I get an error (Unsatisfied link error). please help URGENT have to submit a project! in 5 hours GOOD ENUFF! maybe i am not including a dll
this is the java side code of the JNI which i am including in the package.
package talkinghands;
class DGlove
     public static float[] values = new float[7];
     public static boolean status = false;
     public static native void getValNative();
     public static native void connectDG();
     public static native void disconnectDG();
     public static native boolean getStatus();
     public static native float getSensor0();
     public static native float getSensor1();
     public static native float getSensor2();
     public static native float getSensor3();
     public static native float getSensor4();
     public static native float getSensor5();
     public static native float getSensor6();
     static
     System.loadLibrary("dg5dt");
     public static void getValues()
          getValNative();
          values[0] = getSensor0();
          values[1] = getSensor1();
          values[2] = getSensor2();
          values[3] = getSensor3();
          values[4] = getSensor4();
          values[5] = getSensor5();
          values[6] = getSensor6();
     public static void main (String[] args)
/*          connectDG();
          while(true)
          getValues();
          status = getStatus();
          System.out.println(status);
          for (int i =0; i<=6;i++)
               System.out.println(values);
          getValues();
          for (int i =0; i<=6;i++)
               System.out.println(values[i]);

You didn't say anything about the dll. Did you compile it to use C linkages (not C++)?

Hot Deploy Error - Build your first Portal

The following is the error I got when I tried to hot deploy a portal in EBCC for
welogic 7.0:
"Not found" error occurred when connecting to server. Please go to Connection
Settings and check service names.
Any help on that will be greatly appreciated?
Thanks,
Rita

Rita,
Is you server running? This means that an HTTP 404 was returned when trying
to access the DataSyncServlet. Check your server name, port, application
name etc. under the Connection Settings.
If you want to verify the URL you can just hit it with a web browser. It
should look something like:
http://locahost:7501/p13nAppDataSync/DataSyncServlet (for an application
called 'p13n')
Sincerely,
Daniel Selman
"Rita" <[email protected]> wrote in message
news:3d3ef190$[email protected]..
>
The following is the error I got when I tried to hot deploy a portal inEBCC for
welogic 7.0:
"Not found" error occurred when connecting to server. Please go toConnection
Settings and check service names.
Any help on that will be greatly appreciated?
Thanks,
Rita

Linking error when using C++ DLL for writing TDM files

I try to integrate TDM into my C++ code. Then I downloaded the package from the NI website "Integrating TDMS in Third-Party Products". I tested the the sample "writeFile.c". But a linking error as following occurred:
1>Linking...
1>nilibddc.lib(implib.obj) : error LNK2019: unresolved external symbol __imp__wsprintfA referenced in function _LoadDLLIfNeeded
1>.\Debug/Test TDM.exe : fatal error LNK1120: 1 unresolved externals
Can anyone help me out. Many thanks.
Solved!
Go to Solution.

I migrated my code from VC++ 6 compiler to VC++ 2005. Then linking errors are gone.
nilibddc.lib(implib.obj) : error LNK2001: unresolved external symbol ___security_cookie
nilibddc.lib(implib.obj) : error LNK2001: unresolved external symbol @__security_check_cookie@4
P.S. "Read me" from NI says "The Microsoft 32-bit format is compatible with Microsoft Visual C version 6.0". But I tested the code with VC++6 professional with SP6 package and upgrade the SDK to the latest version that supports vc6. I still have the linking errors. My test seems prove that the dll does not support VC6.
Message Edited by Kuo on 04-22-2010 05:03 AM

Deploying simple SharePoint 2013 feature causing error: "Error occurred in deployment step 'Add Solution': An unknown exception occurred while executing a sandboxed code solution request in the worker process."

When trying to deploy a sandboxed solution containing only a feature with a simple associated event receiver from VS 2013, I'm getting the following error:
Error occurred in deployment step 'Add Solution': An unknown exception occurred while executing a sandboxed code solution request in the worker process.\r\n|0
I'm working in Visual Studio 2013, deploying to SharePoint 2013.
The SharePoint project is very basic. I've only added a feature and an associated event receiver. It works without the event receiver. Then after I simply add the event receiver I get the error.
I've tried deploying directly from VS 2013 as well as publishing to a .WSP and uploading via web interface. Same error reported using both methods. I'm doing this using an Administrator account that I've confirmed is a site collection administrator.
Additionally, I've found that if I change Sandboxed Solution to False, deploy it, retract it, then change Sandboxed Solution back to True, then I can successfully deploy it. But this doesn't seem to be a permanent solution as the error will resurface a day
or two later...

Hi Steve,
Are you running your SharePoint 2013 on domain controller?
http://www.learningsharepoint.com/2013/08/09/sharepoint-2013-error-an-unknown-exception-occurred-while-executing-a-sandboxed-code-solution-request-in-the-worker-process-rn0/
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b7408608-c21b-45d9-bc16-e6afff510cd2/installed-sharepoint-2013-foundation-on-window-2010-server-issues-activating-sandbox-solutions?forum=sharepointadmin
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Stateful session bean hot deployment error?

Hi,
i'm getting an exception ...
1. Deploy a stateful session bean.
2. Hit the server and create an instance, then remove it.
3. Change Stateful session bean source compile and hot deploy it.
4. Hit the server and try creating an instance...exception !!!!
"IllegalArgumentException: Object is not an instance of declaring class"
Please help!!!
Naveen

Hi Navin,
Firstly could you let me know , what option did you set in Jdeveloper to perform hot deploy ??
I would like to hot deploy Stateless Session beans on Embedded OC4J using JDeveloper.
Bhavesh

Obaccess.dll causes link error on hot deploys

Similar Messages

Maybe you are looking for