OBI EE 11.1.1.7.0 configuration issues (fail at Weblogic domain startup)
Hi,
I am installing OBI EE 11.1.1.7.0 on Windows 7 64-bit. Followed below steps:-
1. Install WLS 10.3.6 - Success
2. Create RCU for OBI - Success
3. Install OBI with "Software only Install" - Success
4. Run "config.bat" to configure OBI - Fail
The configuration fails at Step-1 , when setting domain for WLS. Would appreciate if someone can help me out here.
Below is the content in log file from where it started to fail - *"install2013-05-31_11-44-29PM.log"*
[2013-05-31T23:46:52.808+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Domain port set to: 7001
[2013-05-31T23:46:53.938+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Assigning Port: 9556 to: NODE_MANAGER_PORT
[2013-05-31T23:46:53.938+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Starting initial node manager configuration...
[2013-05-31T23:46:53.938+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Found listening port from node manager properties: null
[2013-05-31T23:46:53.938+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Unable to reuse node manager - port is null
[2013-05-31T23:46:53.948+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] No reusable node manager found.
[2013-05-31T23:46:53.948+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Completed initial node manager configuration.
[2013-05-31T23:46:53.948+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Assigning Port: 9556 to: NODE_MANAGER_PORT
[2013-05-31T23:46:53.948+05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Nodemanager port set to: 9556
[2013-05-31T23:46:57.793+05:30] [as] [WARNING] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] CSF Entries will not be parsed since the AdminServer is unreachable
[2013-05-31T23:46:57.827+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Executing a Jaxb workflow ...
[2013-05-31T23:46:57.828+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Begining Oracle Fusion Middleware Configuration ...
[2013-05-31T23:46:57.829+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] Begining Oracle Fusion Middleware Configuration ...
[2013-05-31T23:46:57.851+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] ENTRY ASDomain.createDomain
[2013-05-31T23:46:57.852+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] ENTRY ASDomain.createDomain
[2013-05-31T23:46:57.853+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: ENTRY........
[2013-05-31T23:46:57.853+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@6274bff8
[2013-05-31T23:46:57.853+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: 2........
[2013-05-31T23:46:57.854+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: Set the Extion Id to START........
[2013-05-31T23:46:57.854+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: Did the assignment...
[2013-05-31T23:46:57.854+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: EXIT........
[2013-05-31T23:47:24.094+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] RETURN: createDomain
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] RETURN: createDomain
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] ENTRY ASDomain.startDomain
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: ENTRY........
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@37d9ddba
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: 2........
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: Set the Extion Id to START........
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: Did the assignment...
[2013-05-31T23:47:24.110+05:30] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] reportStartConfigAction: EXIT........
[2013-06-01T01:28:05.244+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0]
[2013-06-01T01:28:05.244+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3043)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
[2013-06-01T01:28:05.244+05:30] [as] [ERROR] [] [oracle.as.provisioning] [tid: 15] [ecid: 0000Jvvna8r2RPzLK2h8ie1HeEYP000006,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)Log file -> *"install2013-05-31_11-44-29PM.out"*
CLASSPATH=D:\BI_Home\patch_wls1036\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\PROGRA~1\Java\JDK17~1.0_1\lib\tools.jar;D:\BI_Home\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\BI_Home\WLSERV~1.3\server\lib\weblogic.jar;D:\BI_Home\modules\features\weblogic.server.modules_10.3.6.0.jar;D:\BI_Home\WLSERV~1.3\server\lib\webservices.jar;D:\BI_Home\modules\ORGAPA~1.1/lib/ant-all.jar;D:\BI_Home\modules\NETSFA~1.0_1/lib/ant-contrib.jar;.;C:\Program Files (x86)\Java\jre6\lib\ext\QTJava.zip;D:\BI_Home\utils\config\10.3\config-launch.jar;D:\BI_Home\WLSERV~1.3\common\derby\lib\derbynet.jar;D:\BI_Home\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\BI_Home\WLSERV~1.3\common\derby\lib\derbytools.jar;;
Initializing WebLogic Scripting Tool (WLST) ...
Jython scans all the jar files it can find at first startup. Depending on the system, this process may take a few minutes to complete, and WLST may not return a prompt right away.
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
LOADING DLL : D:\BI_Home\Oracle_BI1\install\config\\StartUtil64.dll
DEBUG : Loading DLL : D:\BI_Home\Oracle_BI1\install\config\\StartUtil64.dll
DEBUG : Loaded DLL : D:\BI_Home\Oracle_BI1\install\config\\StartUtil64.dll
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3180)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3043)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
... 19 moreThanks in advance.
Friend, Even i am installating 11.1.1.7 in my Windows 7 (64 Bit)
At very 1st stage i got error..because i directly tried to install RCU by clicking on the rcu.bat , so 1st i have to install Weblogic server after seeing your steps...
Although there are many sites to help us installing OBI 11.1.1.7, i am currently following this http://satyaobieesolutions.blogspot.com.au/2013/05/obiee-111170-simplesoftware-installation.html which explained very well in detail....!!!!!!!
You might have missed at any step onthis..check once
Please mark if this is helpful...!!!!!!!!!!!
Edited by: KBabu on Jun 3, 2013 12:31 AM
Similar Messages
-
Sharepoint server 2013 configuration issue - failed to create configuration database
Hi All,
I have installed the SharePoint server 2013. After installing the SharePoint products, the configuration stops at failure of creating configuration database.
Some system configuration & info:
- 1 Domain controller server run Active Directory services on Windows server 2008 R2 SP1 (PC1 with name DC.Brainfiniti.com)
- 1 Server which is used for installing Sharepoint server 2013 and MS SQL server 2008 R2 SP1 (PC2 with name App.Brainfiniti.com)
- All of PCs were satisfied the requirement of Sharepoint server 2013
- Firewall turned off & No antivirus tool was installed.
- During installing of Sharepoint, choose "Complete" option: Farm mode and use SQL Server instead of SQL Express.
- During configuration, created a new farm with a domain user account.
- Use domain account to log on and install, configure in Sharepoint & SQL server (PC2)
ATTEMPTS:
1. Tried install and set up all of steps with just 1 account - domain administrator.
2. Tried with separate domain account:
- SQL Service account use for:
+ Install SQL server 2008
+ Connect all SQL services
+ Admin for SQL server
- Setup account use for:
+ Member of local administrator group in PC2
+ Install Sharepoint
+ Run Configuration wizard
+ Was granted permission in SQL database: dbcreator, securityadmin, sysadmin and deselect serveradmin role.
+ Was choose for the database account in configuration database step
Also tried with SQL service account in this step.
3. Tried with Standalone mode for Sharepoint installing
4. Trie with domain name: Brainfiniti.local
5. Tried with some another solution from topic relate to database configuration in our community but not successful.
But all attempts are failed at this configuration database step :'(
Please correct me if I am going wrong by missing something or do I need to start/install some services.
Screenshot Attached
Sorry! Cannot add screenshot because my account is still not verified. Will add later.
LOG ENTRY:
01/23/2013 06:58:28 1 INF Entering function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
01/23/2013 06:58:28 1 INF Found a task by the name of adminvs in the task collection
01/23/2013 06:58:28 1 INF Entering function TaskCommon.GenerateRandomUnUsedPort
01/23/2013 06:58:28 1 INF Entering function TaskCommon.EnsureIIs
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsIisInstalled
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Version of IIS is 7
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsIisInstalled
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Version of IIS is 7
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Entering function ServiceHelper.Start
01/23/2013 06:58:28 1 INF Trying to start service W3SVC and waiting 180 sec to do so
01/23/2013 06:58:28 1 INF service W3SVC is Running, nothing to do
01/23/2013 06:58:28 1 INF starting service W3SVC (it may already be started)
01/23/2013 06:58:28 1 INF Leaving function ServiceHelper.Start
01/23/2013 06:58:28 1 INF Leaving function TaskCommon.EnsureIIs
01/23/2013 06:58:28 1 INF Trying to see if port 40993 is free on machine APP. Min port we will try is 1024, Max port we will try is 49151
01/23/2013 06:58:30 1 INF A SocketException was thrown with
SocketError ConnectionRefused
01/23/2013 06:58:30 1 INF Connect has been refused for port 40993, so we will consider this a free port
01/23/2013 06:58:30 1 INF Have not found a free port yet. Number of tries is 1. Min port we will try is 1024, Max port we will try is 49151
01/23/2013 06:58:30 1 INF Adding port 40993 to the exclusion list so it is not chosen again during this run
01/23/2013 06:58:30 1 INF Leaving function TaskCommon.GenerateRandomUnUsedPort
01/23/2013 06:58:30 1 INF Leaving function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
I just post a part of its logs which contain "error" string because it's too long.
According this log, there is a error in port connection but i've turned firewall off ???
Please help me with this mix up :'(
p/s: sorry for my English!
Thanks,
Hien HoangBelow is the logs entry with "ERR" marked line:
01/23/2013 07:03:17 9 INF Now joining to farm at server app.brainfiniti.com database SharePoint_Config
01/23/2013 07:04:12 9 ERR Task configdb has failed with an unknown exception
01/23/2013 07:04:12 9 ERR Exception: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not
be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ExceptionInfo for language English (United States)
01/23/2013 07:04:12 9 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ExceptionInfo for language English (United
States)
01/23/2013 07:04:12 9 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 ERR An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception
information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 INF Entering function TaskBase.OnTaskStop
01/23/2013 07:04:12 9 INF Creating the OnTaskStop event for task configdb
01/23/2013 07:04:12 9 ERR Task configdb has failed
01/23/2013 07:04:12 9 INF friendlyMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 9 INF debugMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function TaskBase.FireTaskStateChanged
01/23/2013 07:04:12 9 INF Firing the OnTaskStateChanged event for task configdb
01/23/2013 07:04:12 9 INF Entering function TaskDriver.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName
for language English (United States)
01/23/2013 07:04:12 9 INF Resource retrieved id ConfigurationDatabaseTaskDisplayName
is configuration database
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Received an TaskStateEventHandler event. task:configdb TaskBase.State:stopped
01/23/2013 07:04:12 9 INF Entering function TasksQueue.IncrementTaskFailed
01/23/2013 07:04:12 9 INF Incremented the number of tasks failed to 1
01/23/2013 07:04:12 9 INF Leaving function TasksQueue.IncrementTaskFailed
01/23/2013 07:04:12 9 INF Task configdb has stopped and failed. Total failed is now 1
01/23/2013 07:04:12 9 INF Leaving function TaskDriver.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Entering function PsconfigBaseForm.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Invoking the UI thread with the task state chagne event
01/23/2013 07:04:12 1 INF Entering function ConfigurationProgressForm.InvokeTaskStateEventHandler
01/23/2013 07:04:12 1 INF Received an TaskStateEventHandler event. task:configdb
TaskBase.State:stopped TaskBase.TaskResultconfigdb
01/23/2013 07:04:12 1 INF Acquiring the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Releasing the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Acquiring the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Releasing the reader lock to retrieve the state
01/23/2013 07:04:12 1 ERR Task configdb has stopped and failed. Total failed
is now 1
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
disconnect
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter disconnect in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
connect
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter connect in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
create
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter create in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 1 INF Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
for language English (United States)
01/23/2013 07:04:12 1 INF Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
is Failed to create the configuration database.
01/23/2013 07:04:12 1 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 1 INF Updating the task label below the progress bar Failed to
create the configuration database.
01/23/2013 07:04:12 1 INF Entering function FormParameterCollection.Add
01/23/2013 07:04:12 1 INF Leaving function FormParameterCollection.Add
01/23/2013 07:04:12 1 INF Last message from task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Updating the task additional notification information below
the progress bar An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 1 INF Leaving function ConfigurationProgressForm.InvokeTaskStateEventHandler
01/23/2013 07:04:12 9 INF Sleeping an extra 1 ms so things don't go too fast for the user for this
task
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background with our
trademarked image
01/23/2013 07:04:12 9 INF Leaving function PsconfigBaseForm.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Leaving function TaskBase.FireTaskStateChanged
01/23/2013 07:04:12 9 INF Leaving function TaskBase.OnTaskStop
01/23/2013 07:04:12 9 INF Leaving function TaskThread.ExecuteTask
01/23/2013 07:04:12 4 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 INF Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName for language English (United States)
01/23/2013 07:04:12 4 INF Resource retrieved id ConfigurationDatabaseTaskDisplayName is configuration database
01/23/2013 07:04:12 4 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 ERR Task configuration database failed, so stopping execution of the engine
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key disconnect
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter disconnect in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key connect
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter connect in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key create
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter create in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 INF Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel for language English
(United States)
01/23/2013 07:04:12 4 INF Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel is Failed to create the configuration
database.
01/23/2013 07:04:12 4 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 ERR Failed to create the configuration database.
An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 4 INF Entering function TaskDriver.NotifyTaskSummary -
Issue when creating WebLogic domain using the Configuration Wizard
This is the exception i received whenever I tried to create a new domain:
Exception:
Traceback (innermost last):
File "C:\Documents and Settings\user.lastname\Local Settings\Temp\WLSTOfflineIni12292.py", line 5, in ?
ImportError: no module named java
at org.python.core.Py.ImportError(Py.java:184)
at org.python.core.imp.import_first(imp.java:555)
at org.python.core.imp.import_name(imp.java:616)
at org.python.core.imp.importName(imp.java:635)
at org.python.core.ImportFunction.load(__builtin__.java:1020)
at org.python.core.ImportFunction.__call__(__builtin__.java:1013)
at org.python.core.PyObject.__call__(PyObject.java:248)
at org.python.core.__builtin__.__import__(__builtin__.java:973)
at org.python.core.imp.importAll(imp.java:724)
Can someone explains what this is?
Many thanks in advance.For my case, it failed with:
sys-package-mgr: can't create package cache dir, '/tmp/cachedir/packages'.
And the solution is as described here:
http://ghattus.com/2009/08/how-are-python-cachedir-and-the-error-sys-package-mgr-cant-create-package-cache-dir-are-related.html -
Error installing OBIEE 11g on Linux 64 bits - Configuration Assistant fails
Hello,
I am trying to install OBISE1 on Oracle Linux 5 - 64 bits.
I've followed these steps:
1) Install Oracle DB
2) Install jdk Linux 64 bits (jdk1.7.0)
3) Install WebLogic
4) Install RCU
5) Install OBI 11g (Software only installation)
Until here, all is correct.
6) Configuration assistant failed:
[2011-09-12T12:04:58.844+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0]
[2011-09-12T12:04:58.845+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3149)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3039)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
[2011-09-12T12:04:58.846+02:00] [as] [ERROR] [] [oracle.as.provisioning]
[tid: 14] [ecid: 0000J9Soq_rFGBWFLz6UOA1ERSJh000005,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:48)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:662)
I have fount posts with a similar problem, but is over Windows.
I appreciate any ide/suggestion.
Thank you in advance.
Regards,I have seen that WebLogic is shut down, so I am trying to start up, but I can't:
starting weblogic with Java version:
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Starting WLS with line:
/usr/java/jdk1.7.0/bin/java -jrockit -Xms512m -Xmx512m
-Dweblogic.Name=AdminServer
-Djava.security.policy=/root/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy
-Dweblogic.ProductionModeEnabled=true -da
-Dplatform.home=/root/Oracle/Middleware/wlserver_10.3
-Dwls.home=/root/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.home=/root/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/root/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/root/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath
weblogic.Server
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
I have modified /etc/profile, including JAVA_HOME and PATH with the java PATH. And it is ok, because if I executed java -version I can see the new jdk:
java version "1.7.0"
Java(TM) SE Runtime Environment (build 1.7.0-b147)
Java HotSpot(TM) 64-Bit Server VM (build 21.0-b17, mixed mode)
Any idea¿? -
Configuration system failed to initialize
Getting error when I try to install an excel addin that I have published.
Error message is "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
To publish the addin I use the publish option on the build menu of VS2013.
Specify the location to publish this application: F:\publish where F: is a USB drive.
What is the default installation path on end user computers: From a CD-ROM or DVD-ROM
Then I take the USB drive to another PC, double click on setup.exe in the USB drive and get the "configuration system failed to initialize" error. I copy the entire publish directory to the C: drive of the target system and get the same error.
What am I doing wrong?
thanks,Hi Steve,
>>Error message is "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
For this issue, I would recommend you try to uninstall/reinstall the VSTO runtime. The link below might be useful to you:
#Customization could not be loaded because the application domain could not be created.
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/d8204b2f-d5c7-42b3-b339-d2d37d43652d/customization-could-not-be-loaded-because-the-application-domain-could-not-be-created?forum=vsto
If the method above do not work, I will recommend you install the excel add-in in the developing machine with the USB to check whether it could work correctly. If it could not install correctly, I assume that there might be something wrong when you
publish, and could you share us the steps you published? If it works correctly, I assume that it caused by the environment of another pc, it would be helpful if you could share us the screen shoot about details error message.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
"Configuration system failed to initialize" when trying to connect FM12 to Sharepoint
Adding a connection to Sharepoint using the FM12 CMS Connection Manager is failing with the error "Configuration system failed to initialize". I can access all the sites and libraries in Sharepoint perfectly from IE on the same PC, but no matter what I try in the FM12 Connection Manager I get the above mentioned error. The PC (which is actually a VM) is running Windows Server 2008 R2 (x64 with heaps of RAM and HDD free) with all updates applied. FM12 is installed as part of Technical Comms Suite 5 subscription.
Does anyone have any ideas what may be causing this (or what it even means) and how I can fix it?Hi Steve,
>>Error message is "Configuration system failed to initialize". The popup window has the title "visual studio tools for office solution installer"
For this issue, I would recommend you try to uninstall/reinstall the VSTO runtime. The link below might be useful to you:
#Customization could not be loaded because the application domain could not be created.
https://social.msdn.microsoft.com/Forums/sharepoint/en-US/d8204b2f-d5c7-42b3-b339-d2d37d43652d/customization-could-not-be-loaded-because-the-application-domain-could-not-be-created?forum=vsto
If the method above do not work, I will recommend you install the excel add-in in the developing machine with the USB to check whether it could work correctly. If it could not install correctly, I assume that there might be something wrong when you
publish, and could you share us the steps you published? If it works correctly, I assume that it caused by the environment of another pc, it would be helpful if you could share us the screen shoot about details error message.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
HFM 11.1.2.1 Database Configuration issue - EPMCFG-10398
Hi All,
I was configuring EPM 11.1.2.1 on Windows 2003 32 bit instance with Oracle 11.2.0.1+ as DB
Products covered were :
1. Foundation Services
2. FDM
3. Reperting and Analysis
4. Financial Reporting
5. Web Analysis
6. HFM
7. Disclosure Management
I have created separate SID's and grouped them as
Foundation Services + Workspace = hypss
FDM + DM + Calc Mger = hypepm
RA + FR + DM = hyprna
HFM = hyphfm
I also configured them in above order only. However when I was configuring HFM I was given warning as - *"EPMCFG-10398: For successful completion of this task, the Oracle Database tnsnames.ora file must exist"*
Subsequently my following HFM configurations were failed
1. Configure Database
2. Register Application Servers/Clusters
My tnsnames.ora file is as follows
# tnsnames.ora Network Configuration File: C:\app\Administrator\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
HYPSS =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = payous12)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = hypss)
HYPHFM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = payous12)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = hyphfm)
HYPRNA =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = payous12)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = hyprna)
HYPEPM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = payous12)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = hypepm)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
I changed the entry localhost to payous12 (my machin name) in tnsnames.ora. That was the only change I carried out in that file
Further I have not yet installed ethernet drivers on my machine and there is no IP address as well
All other configurations were successful. Can anyone guide for successful configuration of HFM
Thanks
PayousHi Bharat,
To resolve this issue you need to go to
Drive where ODAC is installed \app\Administrator\product\11.1.0\client_1\Network\Admin\Sample
Then Copy the tnsnames.ora file from Sample folder to following location
Drive where ODAC is installed \app\Administrator\product\11.1.0\client_1\Network\Admin
Make necessary changes to that file with respect to your HFM database
Sample tnsnames.ora will look like as follows
HYPHFM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = payous12)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = hyphfm)
Payous -
BPM for Weblogic configuration is failed
1, I install BPM for Weblogic.
2, I create a domain for weblogic using config tool and start it.
3, I create a new directory.
However, the configuration is failed.
The BPM for weblogic is installed in XP and the window of selecting JDK is not pop out.
The log is as follows:
For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your
changes once you are done. creating mbean of type JMSServer ... creating mbean of type JMSSystemResource ... creating mbean of type SubDeployment ... creating mbean of type Queue ... creating mbean of type Topic ... creating mbean of type ConnectionFactory ... creating mbean of type ConnectionFactory ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... setting attributes for mbean type JMSServer setting attributes for mbean type JMSSystemResource setting attributes for mbean type SubDeployment setting attributes for mbean type Queue setting attributes for mbean type Topic setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCXAParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty Saving all your changes ... Saved all your changes successfully. Your edit session is not stopped, you can continue your edits. Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released
once the activation is completed. Activation completed Creating a user ... Created user successfully Deploying application from E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:44 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer archive: E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear, to examplesServer .> .Completed the deployment of Application with status completed Current Status of your Deployment: Deployment command type: deploy Deployment State : completed Deployment Message : no message Deploying application from E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:54 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine3 archive: E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear, to examplesServer .> Failed to deploy the application with status failed Current Status of your Deployment: Deployment command type: deploy Deployment State : failed Deployment Message : java.lang.OutOfMemoryError: Java heap space No stack trace available. This Exception occurred at Wed Jul 15 12:12:17 CST 2009. weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed. at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48) at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185) at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536) at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160) at org.python.core.PyMethod.__call__(PyMethod.java:96) at org.python.core.PyObject.__call__(PyObject.java:248) at org.python.core.PyObject.invoke(PyObject.java:2016) at org.python.pycode._pyx17.deploy$8(<iostream>:223) at org.python.pycode._pyx17.call_function(<iostream>) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:404) at org.python.core.PyFunction.__call__(PyFunction.java:184) at org.python.pycode._pyx16.deploy_Applications$61(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:623) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:256) at org.python.core.PyFunction.__call__(PyFunction.java:169) at org.python.pycode._pyx16.f$0(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:738) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyCode.call(PyCode.java:14) at org.python.core.Py.runCode(Py.java:1135) at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167) at weblogic.management.scripting.WLST.main(WLST.java:129) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at weblogic.WLST.main(WLST.java:29)
Exiting WebLogic Scripting Tool.
<Jul 15, 2009 12:12:17 PM CST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.> QuestionConfirm Action
Do you want to cancel this wizard?Hi,
Thanks for your reply. I change the file and reconfigure the BPM for weblogic. However, it is still failed in 70-72%.
-------------------log message-------------------------------
TO_MSG PATH=/root/bea/wlserver_10.3/server/bin:/root/bea/modules/org.apache.ant_1.6.5/bin:/root/bea/jrockit_160_05/jre/bin:/root/bea/jrockit_160_05/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
TO_MSG
TO_MSG Your environment has been set.
TO_MSG
TO_MSG CLASSPATH=/root/bea/patch_wlw1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/jrockit_160_05/lib/tools.jar:/root/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/root/bea/wlserver_10.3/server/lib/weblogic.jar:/root/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/root/bea/wlserver_10.3/server/lib/webservices.jar:/root/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/root/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:/root/OraBPMwlHome/lib/fuego.boot.jar:/root/OraBPMwlHome/bin/./:/root/OraBPMwlHome/bin/./lax.jar::/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbembedded57.jar:/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbtools57.jar:/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar
TO_MSG
TO_MSG Initializing WebLogic Scripting Tool (WLST) ...
TO_MSG
TO_MSG Welcome to WebLogic Server Administration Scripting Shell
TO_MSG
TO_MSG Type help() for help on available commands
TO_MSG
TO_MSG Starting server BPMServer
TO_MSG Please see the server log files for startup messages available at /root/weblogic3/bpm
TO_MSG Starting weblogic server ...
TO_MSG WLST-WLS-1249792014056: [WARN ] -XX:MaxPermSize=256m is not a valid VM option. Ignoring
TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ26¥ネニ58ᄃメ CST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.0-50_o-100423-1.6.0_05-20080626-2104-linux-ia32 from BEA Systems, Inc.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ00ᄃメ CST> <Info> <Management> <BEA-140013> </root/weblogic3/bpm/config/config.xml not found>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ00ᄃメ CST> <Info> <Management> <BEA-141254> <Generating new domain directory in /root/weblogic3/bpm>
TO_MSG .....WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ12ᄃメ CST> <Info> <Management> <BEA-141255> <Domain generation completed in 12,326 milliseconds.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ13ᄃメ CST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ15ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ15ᄃメ CST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ16ᄃメ CST> <Notice> <Log Management> <BEA-170019> <The server log file /root/weblogic3/bpm/servers/BPMServer/logs/BPMServer.log is opened. All server side log events will be written to this file.>
TO_MSG ...WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ24ᄃメ CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
TO_MSG ....WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ34ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ34ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ34ᄃメ CST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ35ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ35ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ35ᄃメ CST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ35ᄃメ CST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "BPMServer" for domain "bpm" running in Development Mode>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ36ᄃメ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ36ᄃメ CST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
TO_MSG Server started successfully.
TO_MSG Started Server. Trying to connect to the server ...
TO_MSG Connecting to t3://localhost.localdomain:7001 with userid weblogic ...
TO_MSG Successfully connected to Admin Server 'BPMServer' that belongs to domain 'bpm'.
TO_MSG
TO_MSG Warning: An insecure protocol was used to connect to the
TO_MSG server. To ensure on-the-wire security, the SSL port or
TO_MSG Admin port should be used instead.
TO_MSG
TO_MSG Location changed to edit tree. This is a writable tree with
TO_MSG DomainMBean as the root. To make changes you will need to start
TO_MSG an edit session via startEdit().
TO_MSG
TO_MSG For more help, use help(edit)
TO_MSG
TO_MSG Starting an edit session ...
TO_MSG Started edit session, please be sure to save and activate your
TO_MSG changes once you are done.
TO_MSG creating mbean of type JMSServer ...
TO_MSG creating mbean of type JMSSystemResource ...
TO_MSG creating mbean of type SubDeployment ...
TO_MSG creating mbean of type Queue ...
TO_MSG creating mbean of type Topic ...
TO_MSG creating mbean of type ConnectionFactory ...
TO_MSG creating mbean of type ConnectionFactory ...
TO_MSG creating mbean of type Server ...
TO_MSG creating mbean of type JDBCSystemResource ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type JDBCSystemResource ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Realm ...
TO_MSG creating mbean of type RoleMapper ...
TO_MSG creating mbean of type CredentialMapper ...
TO_MSG creating mbean of type CertPathProvider ...
TO_MSG creating mbean of type Authorizer ...
TO_MSG creating mbean of type Adjudicator ...
TO_MSG creating mbean of type AuthenticationProvider ...
TO_MSG creating mbean of type AuthenticationProvider ...
TO_MSG setting attributes for mbean type JMSServer
TO_MSG setting attributes for mbean type JMSSystemResource
TO_MSG setting attributes for mbean type SubDeployment
TO_MSG setting attributes for mbean type Queue
TO_MSG setting attributes for mbean type Topic
TO_MSG setting attributes for mbean type JMSConnectionFactory
TO_MSG setting attributes for mbean type JMSConnectionFactory
TO_MSG setting attributes for mbean type Server
TO_MSG setting attributes for mbean type JDBCSystemResource
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCConnectionPoolParams
TO_MSG setting attributes for mbean type JDBCDriverParams
TO_MSG setting attributes for mbean type JDBCDataSource
TO_MSG setting attributes for mbean type DefaultIdentityAsserter
TO_MSG setting attributes for mbean type SecurityConfiguration
TO_MSG setting attributes for mbean type SecurityParams
TO_MSG setting attributes for mbean type EmbeddedLDAP
TO_MSG setting attributes for mbean type SecurityParams
TO_MSG setting attributes for mbean type Domain
TO_MSG setting attributes for mbean type JDBCDataSource
TO_MSG setting attributes for mbean type JDBCXAParams
TO_MSG setting attributes for mbean type JDBCDataSourceParams
TO_MSG setting attributes for mbean type JDBCConnectionPoolParams
TO_MSG setting attributes for mbean type JDBCDriverParams
TO_MSG setting attributes for mbean type JDBCDataSourceParams
TO_MSG setting attributes for mbean type JDBCSystemResource
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG Saving all your changes ...
TO_MSG Saved all your changes successfully.
TO_MSG Your edit session is not stopped, you can continue your edits.
TO_MSG Activating all your changes, this may take a while ...
TO_MSG The edit lock associated with this edit session is released
TO_MSG once the activation is completed.
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute InternalAppsDeployOnDemandEnabled on weblogic.management.configuration.DomainMBeanImpl@fffe8220([bpm]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.LogMBeanImpl@1759a12([bpm]/Log[bpm]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute ListenAddress on weblogic.management.configuration.ServerMBeanImpl@2ddd7637([bpm]/Servers[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.LogMBeanImpl@2df105fa([bpm]/Servers[BPMServer]/Log[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.WebServerLogMBeanImpl@2df106e5([bpm]/Servers[BPMServer]/WebServer[BPMServer]/WebServerLog[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ27¥ネニ53ᄃメ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG
TO_MSG The following non-dynamic attribute(s) have been changed on MBeans
TO_MSG that require server re-start:
TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=Log,Server=BPMServer
TO_MSG Attributes changed : RotateLogOnStartup
TO_MSG
TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=Server
TO_MSG Attributes changed : ListenAddress
TO_MSG
TO_MSG MBean Changed : com.bea:Name=bpm,Type=Log
TO_MSG Attributes changed : RotateLogOnStartup
TO_MSG
TO_MSG MBean Changed : com.bea:Name=bpm,Type=Domain
TO_MSG Attributes changed : InternalAppsDeployOnDemandEnabled, ProductionModeEnabled
TO_MSG
TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=WebServerLog,Server=BPMServer,WebServer=BPMServer
TO_MSG Attributes changed : RotateLogOnStartup
TO_MSG
TO_MSG Activation completed
TO_MSG Creating a user ...
TO_MSG
TO_MSG Created user successfully
TO_MSG Deploying application from /root/OraBPMwlHome/j2ee/weblogic/deployer/wlj2eedeployer.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ28¥ネニ01ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer [archive: /root/OraBPMwlHome/j2ee/weblogic/deployer/wlj2eedeployer.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/engine/01-eng-bpmengine.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ28¥ネニ08ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine [archive: /root/OraBPMwlHome/ears/engine/01-eng-bpmengine.ear], to BPMServer .>
TO_MSG .................Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/08-workspace-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ29¥ネニ48ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 08-workspace-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/08-workspace-XAFDIDS.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/09-feeds-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ30¥ネニ45ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 09-feeds-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/09-feeds-XAFDIDS.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/06-workspaceadmin-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ31¥ネニ00ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 06-workspaceadmin-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/06-workspaceadmin-XAFDIDS.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/07-papiws-wls103-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ31¥ネニ31ᄃメ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 07-papiws-wls103-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/07-papiws-wls103-XAFDIDS.ear], to BPMServer .>
TO_MSG ..WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ31¥ネニ48ᄃメ CST> <Error> <HTTP> <BEA-101220> <Error occurred while setting document root for "weblogic.servlet.internal.WebAppServletContext@30302d0 - appName: '07-papiws-wls103-XAFDIDS.ear', name: 'papiws', context-path: '/papiws', spec-version: '2.5'" to "/root/weblogic3/bpm/servers/BPMServer/tmp/_WL_user/07-papiws-wls103-XAFDIDS.ear/f0r1c0/papiws.war".>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ¦ᄌヒ¥ヘネ12₩ラᄊ31¥ネニ48ᄃメ CST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1249792304208' for task '5'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'papiws''
TO_MSG WLST-WLS-1249792014056: weblogic.application.ModuleException: Failed to load webapp: 'papiws'
TO_MSG WLST-WLS-1249792014056: at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
TO_MSG WLST-WLS-1249792014056: at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
TO_MSG WLST-WLS-1249792014056: at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
TO_MSG WLST-WLS-1249792014056: at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
TO_MSG WLST-WLS-1249792014056: at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
TO_MSG WLST-WLS-1249792014056: Truncated. see log file for complete stacktrace
TO_MSG WLST-WLS-1249792014056: java.io.IOException: Error opening file
TO_MSG WLST-WLS-1249792014056: at java.util.zip.ZipFile.open(Native Method)
TO_MSG WLST-WLS-1249792014056: at java.util.zip.ZipFile.<init>(ZipFile.java:117)
TO_MSG WLST-WLS-1249792014056: at java.util.zip.ZipFile.<init>(ZipFile.java:133)
TO_MSG WLST-WLS-1249792014056: at weblogic.utils.classloaders.ZipClassFinder.<init>(ZipClassFinder.java:23)
TO_MSG WLST-WLS-1249792014056: at weblogic.application.io.ArchivedWar$WebInfClassesFinder.<init>(ArchivedWar.java:290)
TO_MSG WLST-WLS-1249792014056: Truncated. see log file for complete stacktrace
TO_MSG WLST-WLS-1249792014056: >
TO_MSG WLST-WLS-1249792014056: java.io.FileNotFoundException: /root/weblogic3/bpm/config/config.xml (Too many open files)
TO_MSG WLST-WLS-1249792014056: at java.io.FileOutputStream.open(Native Method)
TO_MSG WLST-WLS-1249792014056: at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
TO_MSG WLST-WLS-1249792014056: at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
TO_MSG WLST-WLS-1249792014056: at weblogic.utils.FileUtils.writeToFile(FileUtils.java:115)
TO_MSG WLST-WLS-1249792014056: at weblogic.utils.Fil -
Configuration is failed - BPM for Weblogic 10.3.1
1, I install BPM for Weblogic.
2, I create a domain for weblogic using config tool and start it.
3, I create a new directory.
However, the configuration is failed.
The BPM for weblogic is installed in XP and the window of selecting JDK is not pop out.
The log is as follows:
For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your
changes once you are done. creating mbean of type JMSServer ... creating mbean of type JMSSystemResource ... creating mbean of type SubDeployment ... creating mbean of type Queue ... creating mbean of type Topic ... creating mbean of type ConnectionFactory ... creating mbean of type ConnectionFactory ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... setting attributes for mbean type JMSServer setting attributes for mbean type JMSSystemResource setting attributes for mbean type SubDeployment setting attributes for mbean type Queue setting attributes for mbean type Topic setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCXAParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty Saving all your changes ... Saved all your changes successfully. Your edit session is not stopped, you can continue your edits. Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released
once the activation is completed. Activation completed Creating a user ... Created user successfully Deploying application from E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:44 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer [archive: E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear], to examplesServer .> .Completed the deployment of Application with status completed Current Status of your Deployment: Deployment command type: deploy Deployment State : completed Deployment Message : no message Deploying application from E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:54 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine3 [archive: E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear], to examplesServer .> Failed to deploy the application with status failed Current Status of your Deployment: Deployment command type: deploy Deployment State : failed Deployment Message : java.lang.OutOfMemoryError: Java heap space No stack trace available. This Exception occurred at Wed Jul 15 12:12:17 CST 2009. weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed. at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48) at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185) at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536) at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160) at org.python.core.PyMethod.__call__(PyMethod.java:96) at org.python.core.PyObject.__call__(PyObject.java:248) at org.python.core.PyObject.invoke(PyObject.java:2016) at org.python.pycode._pyx17.deploy$8(<iostream>:223) at org.python.pycode._pyx17.call_function(<iostream>) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:404) at org.python.core.PyFunction.__call__(PyFunction.java:184) at org.python.pycode._pyx16.deploy_Applications$61(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:623) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:256) at org.python.core.PyFunction.__call__(PyFunction.java:169) at org.python.pycode._pyx16.f$0(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:738) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyCode.call(PyCode.java:14) at org.python.core.Py.runCode(Py.java:1135) at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167) at weblogic.management.scripting.WLST.main(WLST.java:129) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at weblogic.WLST.main(WLST.java:29)
Exiting WebLogic Scripting Tool.
<Jul 15, 2009 12:12:17 PM CST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.> QuestionConfirm Action
Do you want to cancel this wizard?Hi Ye,
I noticed this afternoon that Oracle's refering to Oracle WebLogic 10.3.1 as "Oracle WebLogic 11g".
Know this comes as no surprise to you, but when I tried to install Oracle BPM 10gR3 Enterprise on WebLogic 11g (WebLogic 10.3.1) this afternoon it failed. A friend pointed out to me that Oracle WebLogic 11g does not support the DataDirect JDBC driver. Since Oracle BPM Enterprise 10gR3 uses this driver to connect to both its Engine database and Directory Service databases, he's thinking this might be the cause of our problem.
It would be worth verifying this with Support. Here's what I think they'll point you to. The Oracle BPM 10gR3 release notes(http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/relnotes/release_notes_OracleBPM10gR3.htm#N65589) indicate that the only WebLogic application servers supported are Oracle WebLogic 10.3 (10gR3), Oracle WebLogic 10.0 MP1.
Again, talk to Support, but I don't think there's a workaround. The only thing I think you can do is to uninstall WebLogic 10.3.1 and then install WebLogic 10.3 if you want to install Oracle BPM 10gR3 Enterprise on it.
Dan -
How to configure multiple smtp servers per domain
Hi,
how do we configure multiple smtp servers per domain/corporate in iplanet messaging server 5.2. i wanted to do this so that i can configure some domains with virus scanning and some domains without antivirus.Hi Martin,
Well we are trying to run a report without exactly specifying the name of reports server anywhere, e.g. in database or in form or anywhere else. Now if I do not supply a reports server name using RUN_REPORT_OBJECT, the error it displays is FRM-41211: Integration Error : SSL failure ... However if I specify the reports server name in the form, the reports run perfect. Also the name of reports server is specified in rwservlet.properties.
Now the question goes as follows:
Can I run my report from Form without specifying the name of the Reports server anywhere at all. This is so because either an in-process reports server should be picked or the one which is entered in rwservlet.properties should be pickec up by default. Please correct us if we are wrong. once we are through with it, we have to move to Oracle 10gR2 concept of reports server.
Thanks in anticipation,
Ruchi/Saurabh -
OPMN configuration assistant failed while applying patch on SOA 10.1.3.1
Hi All,
I tried upgrading the SOA Server from version 10.1.3.1 to 10.1.3.4 by applying a patch . But while applying patch I faced an error “OPMN Configuration Assistant failed “ . When I gave opmnctl status command in the command prompt I found that the issue is with starting up the HTTP Server . Rest all components of opmn were up and running.
The error msg i got is:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Output generated from configuration assistant "Run One-off OPatches":
Oracle Interim Patch Installer version 1.0.0.0.56
Copyright 2006 Oracle Corporation. All Rights Reserved..
We recommend you refer to the OPatch documentation under
OPatch/docs for usage reference. We also recommend using
the latest OPatch version. For the latest OPatch version
and other support related issues, please refer to document
293369.1 which is viewable from metalink.oracle.com
ERROR: OPatch failed because of Inventory problem.Cannot find Oracle Universal Installer shared library
OPatch returns with error code = 100
Configuration assistant "Run One-off OPatches" succeeded
Output generated from configuration assistant "OPMN Configuration Assistant":
opmnctl: starting opmn and all managed processes...
================================================================================
2 of 3 processes started.
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server/
Error
--> Process (index=1,uid=1392512192,pid=4728)
failed to start a managed process after the maximum retry limit
Log:
D:\product\10.1.3.1\OracleAS_3\opmn\logs\\HTTP_Server~1.log
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
can you please suggest a way out for this error .
Edited by: user10451494 on May 24, 2009 10:24 AMDid you check what's in D:\product\10.1.3.1\OracleAS_3\opmn\logs\HTTP_Server~1.log file? Also check what error is reported in D:\product\10.1.3.1\OracleAS_3\Apache\Apache\logs\error.log file.
Thanks
Shail -
Hyperion EPM 11.1.2 Planning Configuration Issue
Hello,
I am experiencing a bit of a problem when attempting to configure Hyperion EPM 11.1.2.
Envrionment: Windows Server 2003 R2 64-bit, Oracle 11g
Issue: Configuration abruptly fails during after the configure database screen for additional EPM products. Upon further digging I found the following error message:
log4j:WARN Please initialize the log4j system properly.*
Exception in thread "Thread-26" java.lang.UnsatisfiedLinkError: D:\oracle\Middl*
ware\EPMSystem11R1\common\config\11.1.2.0\NativeCall.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform*
I am pretty much at a loss at this moment. I downloaded the 64-bit zip files from edelivery and the install appeared to run successfully. I have tried the big bang approach to configuring and the modular approach, but can't seem to move past this. Has anyone encountered this issue before? Any assistance would be greatly appreciated.
Thank you.
CoreyHi Corey, that error it is shown because java is trying to open a 32bit .dll file using a 64 bits library.
to resolve this issue you have to navigate to HYPERIONHOME\common\config
modify the bat file setJavaRunTime.bat and comment the 64 bits java options like this:
REM Get JRE or JDK
REM if exist "%HYPERION_HOME%\common\JRE-AMD64\Sun\1.5.0" goto okSetJREAMD64_150
REM if exist "%HYPERION_HOME%\common\JRE-IA64\Sun\1.5.0" goto okSetJRE64_150
REM if exist "%HYPERION_HOME%\common\JDK-IA64\Sun\1.4.2" goto okSetJDK64_142
REM if exist "%HYPERION_HOME%\common\JRE-IA64\Sun\1.4.2" goto okSetJRE64_142
if exist "%HYPERION_HOME%\common\JRE\Sun\1.5.0" goto okSetJRE150
if exist "%HYPERION_HOME%\common\JDK\Sun\1.4.2" goto okSetJDK142
if exist "%HYPERION_HOME%\common\JRE\Sun\1.4.2" goto okSetJRE142
then run the config utility again it will works. regards
Lucio. -
Configuring Weblogic Domain in Offline Mode
Hi,
I wrote a java code which invoke wlst command required for configuring weblogic domain in offline mode.
please give any idea even i do not know exactly what are the required jar file but i have used weblogic.jar,wlfullclient.jar,jython.jar,and some jar files from modules folder which has given in someone post
i am getting the following error
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.management.scripting.utils.WLSTUtil.initOfflineContext(WLSTUtil.java:291)
at weblogic.management.scripting.utils.WLSTUtil.setupOfflineInternal(WLSTUtil.java:267)
at weblogic.management.scripting.utils.WLSTUtil.setupOffline(WLSTUtil.java:234)
at weblogic.management.scripting.utils.WLSTInterpreter.<init>(WLSTInterpreter.java:134)
at weblogic.management.scripting.utils.WLSTInterpreter.<init>(WLSTInterpreter.java:76)
at DomainConfiguration.<init>(DomainConfiguration.java:15)
at DomainConfiguration.main(DomainConfiguration.java:61)
Caused by: java.lang.NoClassDefFoundError: com/oracle/cie/wizard/ControllerProxy
at java.lang.Class.getDeclaredMethods0(Native Method)
at java.lang.Class.privateGetDeclaredMethods(Class.java:2427)
at java.lang.Class.getMethod0(Class.java:2670)
at java.lang.Class.getMethod(Class.java:1603)
at com.oracle.cie.domain.AbstractManager.getInstanceObject(AbstractManager.java:88)
at com.oracle.cie.domain.AbstractManager.load(AbstractManager.java:46)
at com.oracle.cie.domain.ConfigManager.<clinit>(ConfigManager.java:37)
at com.oracle.cie.domain.DomainConstants.<clinit>(DomainConstants.java:20)
at com.oracle.cie.domain.script.jython.WLScriptContext.init(WLScriptContext.java:220)
at com.oracle.cie.domain.script.jython.WLScriptContext.setup(WLScriptContext.java:162)
at com.oracle.cie.domain.script.jython.WLST_offline.setupContext(WLST_offline.java:105)
... 11 more
thanks in advanceHi,
Make sure that you have weblogic.jar and jython-modules.jar
You will find weblogic.jar under %BEA_Home% / server / lib
and you will find jython-modules.jar under %BEA_Home% / common / wlst/modules
Regards,
Kal -
Configuration Issue in User Mapping ..
Hi,
Pls help resolve this issue..
When i go to <b>" UserMapping "</b> option using the <b>"Personalize "</b> link , i get the following error msg..
"There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system"
Also , if i go thru "User Administration -> User Mapping "
then it says,
--"There is a configuration issue which leads to problem when accessing user mapping data for the selected backend system .
Usually reason is user mapping being configured for Strong encryption, but necessary additional files might be missing.Check Security log file for information "--
I am not able to solve this problem..Pls help
Thanks in advanceHi Venkat,
<b>Here the quick and dirty solution</b>:
In your portal go to 'System Administration' -> 'System Configuration' -> 'UM Configuration' -> 'Direct Editing'.
There locate the parameter 'ume.usermapping.unsecure', set it to 'TRUE' and restart your server.
I would rather recommend to install the unlimited strength jurisdiction policy files.
For more info on this, check this thread:
JCE Jurisdiction does not allow Portal to start
Hope this helps,
Robert -
Configuration issue of syslog.conf
Dear All,
My client is facing a configuration issue of syslog.conf.
They have set a cacti on a Linux server for monitoring of all servers snmp & syslog.
The part of snmp has set up successfully but cannot send the syslog to the cacti.
My client want the syslog can keep on the localhost and send to cacti for monitoring
we have tried to do the following things for make it work:
Insert the information (*.* @10.251.99.74) in /etc/syslog.conf
Restart service of system-log
Deleted all word of loghost in the /etc/hosts file
But still not work. Anyone can give me suggestion or idea about this?Thank you for your reply.
It is tab. But I think the problem is solaris cannot use *.* to represent all logs.
I have used the following is work
*.err;ker.debug;daemon.notice;mail.crit @10.251.99.74
If that is not the mail reason, please put me right.
Maybe you are looking for
-
Regarding downloading data into excel from alv output
hi experts, i have developed a customized report(ALV) in which the employee number and all details are coming but when i press download to excel button and get downloaded it to the excel sheet the employee number is only not coming but all details ar
-
Acrobat PDF Maker sending old mail merges.
I am using the Acrobat Add-In in Word 2007. Earlier in the week I sent a PDF mail merge and now that I have created a new PDF merge, for some reason the program is randomly adding old email messages and sending them again. How do prevent this from
-
Baseline applications in BPC 7.0 NW version...
Somewhere in the forum thread I was reading (a response from Jeffrey Holdeman I think) that the initial content of APSHELL has legal application delivered with it. I don't see it in my installation. Is there a way to get access to the Legal Applicati
-
Where do you store Hard coding values?
Hi All, We have a requirement to call a 3rd party web service from SAP for which there are 12 - 13 attributes which are constant values and are not going to change. These can be hard coded inside the implementation methods but I do not want to do it.
-
Short dump on zautoclear.
Hi All, I am getting error "CALL_FUNCTION_NOT_FOUND" while executing tcode zautoclear.Please help. Moderator message: obvious message, please try solving problems yourself first, search for information. Message was edited by: Thomas Zl